Learn Steps To Make Fingerprint Jewellery 

Condition a small ball of polymer clay by working it in your hand to warm it up so the clay is more

pliable.

Lay a sheet of wax paper on the table and set the conditioned clay on it. Use a wood dowel as a rolling pin to roll out the clay to an even

1/8-inch thickness for a pendant.

Press a finger into the clay and move it gently from side to 

side to create a good fingerprint impression.

Lay the fingerprint pendant on a piece of baker's parchment paper. Allow to harden for a couple of 

hours.

Put on a filter mask and open a jar of real metal powder.

Place the piece of baker's parchment with the pendent resting on it in a 

toaster oven or regular oven.

Place Here

baker's parchment

Allow the fingerprint pendant to cool. Glaze the pendant by brushing or dipping to seal the metallic 

powder to the polymer clay.

Thread a metal jump ring through the small hole at the top of the pendant.

If You Are Find great deals of Fingerprint Jewellery, 

visit Pastelprint.co.uk