laser cutting - federal metal works
TRANSCRIPT
Laser Cutting Laser Cutting is a technology that uses a laser to cut materials,
and is typically used for industrial manufacturing applications.
Laser cutting works by directing the output of a high-power laser
most commonly through optics. The laser optics and CNC
(computer numerical control) are used to direct the material or
the laser beam generated.
Laser cutting produces part shapes by cutting sheet material using
an intense laser beam. This cutting method uses a beam of high-
density light energy focused through a tiny hole in a nozzle.
Design Considerations:
Sharp inside corners of the part may have a slight rounding due
to beam radius of approximately 0.02 –0.04".
Edge burrs are usually minimal and debarring of edges is
usually not necessary.
Thin flimsy structures, such as shapes where a high percent of
material is removed and long slots may experience some
warping.
The Advantages of Laser Cutting:
The process offers low cost for
prototype and short runs since no
physical tooling are needed. Heat
distortion is minimal and typically
limited to about 10% of material
thickness. Cut parts generally remain
flat. Lasers leave minimal burrs.
The laser creates a beam of light that is
used to cut through the material, so
there is no part of the laser system in
contact with the material.
For More Information Please Visit:
http://federalmetalworks.com/
Address: Yazlik Yeni Mah. Basögretmen Cad. No:38
Gölcük/KOCAELI-TURKEY
Tel: +90 262 335 1598
Fax: +90 262 335 1567
Business Gmail id: [email protected]