Slide 1

LABELING PRESENTATION BY WES WILDCAT WILDCAT PRODUCTION Slide 2 STANDARD LABEL THAT GOES FROM SWITCH PATCH PANELS TO REMOTE PATCH PANELS Slide 3 STANDARD FIBER LABEL Slide 4 STANDARD LABEL THAT GOES FROM REMOTE PATCH PANEL TO EQUIPMENT Slide 5 STANDARD RACK LABEL Slide 6 STANDARD RACK LABEL FOR ROOM GRID Slide 7 STANDARD LABEL FOR REMOTE PATCH PANELS Slide 8 STANDARD FIBER PATCH PANEL LABEL Slide 9 STANDARD LABEL FOR WALL PLATES Slide 10 CARD FOR INSIDE THE OLD SIEMON WALLPLATES Slide 11 LABEL FOR EQUIPMENT IN THE RACKS Slide 12 SWITCH INFORMATION ON EQUIPMENT Slide 13 INFORMATION USED FOR WALLMOUNTS Slide 14 LABEL FOR PHONE PANELS OR CALLED 110 AND 66 BLOCKS Slide 15 EXAMPLE OF A LABEL WITH TOO MUCH INFO Slide 16 LABELS WITH ORIGINAL NAME AND EQUIPMENT NAME Slide 17 USING EQUIPMENT NAME MAKES SMALLER LABEL Slide 18 LABEL FOR EQUIPMENT THAT DONT BELONG TO NETS LIKE IN ML-MR AND CG2 Slide 19 NEW STYLE PATCH PANELS IN CG1 AND FL0 Slide 20 UPSIDEDOWN LABEL Slide 21 SHARPIE USED INSTEAD OF REPLACING LABEL Slide 22 OLD LABEL NOT REMOVED Slide 23 PEN USED INSTEAD OF REPLACING TEMPLATE Slide 24 INFORMATION I NEED IS THE LOCATION SWITCH NAME AND SWITCH PORTS Slide 25 LABELING INFO FROM NETWORK TO WALLPLATE Slide 26 INFORMATION I NEED Slide 27 THANK YOU! Slide 28 FOLLOW UP 1.ARE FIBER PORTS TO BE LABELED BY PAIR OR BY PORTS? 2. SHOULD FIBER PANELS BY LABELED BY NUMBERS OR BY ALPHA? 3. DO WE USE A COLON OR SLASH ON EQUIPMENT LABELS. Ex, 3:7 OR 3/7 4. SHOULD GROUP NAME GO ON LABELS ON EQUIPMENT THAT DONT BELONG TO NETS? Ex, R4-HURON OR R4-DSG/HURON