KENWORTHTHE WORLD’S BEST.

When your payload requirements demand a bridge-law compliant wheelbase, consider Kenworth’s new T880S — a truck designed at its core

with the versatility, strength and productivity you need to move your business ahead.

Available with a 114” BBC and a bumper setting of 28” — the shortest in the industry — the T880S trims tare weight to the bone, optimizes

weight distribution and gives you unsurpassed flexibility for body installation. Perfect for heavy-duty vocational applications — such as mixers,

dump trucks and cranes — where every incremental pound of payload delivered contributes directly to profitability.

THE RUGGED DUTY, LIGHTWEIGHT WORKHORSE THAT’S ALL BUSINESS.

KENWORTH T880S. THE WORLD’S BEST WAY TO GET WORK DONE.

DESIGNED FOR THE CHALLENGES – AND JOB SITES – YOU FACE EVERY DAY

DESIGNED FOR THE CHALLENGES – AND JOB SITES – YOU FACE EVERY DAYThe Kenworth T880S delivers more flexibility and operating advantages in bridge law compliant applications than any other work truck in its class. It

can be spec’d with a wide range of options to meet most every job site requirement and can be configured with single, tandem or tridem drive axles

and a variety of lift axles. Legendary Kenworth chassis durability combined with clear back-of-cab options make it easy to configure the truck body and

handle extreme loads. Best-in-class visibility along with state-of-the-art steering geometry enable the driver to negotiate tight job sites much more easily

— helping to reduce transit times and increase productivity. The T880S isn’t just a truck. It’s the solution.

Complex reflector halogen headlights offer the lighting performance of projector beam systems without the extra cost. Designed with a super thick polycarbonate lens and UV inhibitor, the headlamps will stand up to years of service without any complaints.

The T880S 5-piece hood is made of RTM, a lightweight high-tech material that is tougher and more durable than fiberglass. Bolt-on fenders can be replaced in less than two hours, a cost-effective design that will have you back on the job in no time.

A best-in-class 114” BBC dimension shortens overall length, helps optimize weight distribution, provides more room and flexibility for mounting the body and extra equipment while improving maneuverability. All without sacrificing an inch of driver comfort.

Bumper settings are available in 28” (shortest in the industry), 29.5” and 31.5” to suit your application precisely. Select from mixer tapered, dump tapered and steel box bumpers in a variety of finishes.

To keep the grit and grime where it belongs and off the side of your T880S, Kenworth offers a 2.5” or 4.5” fender extension. Select the size that matches the width of the front tires you specify.

Unlike other set-forward front axle models you may have experienced, the T880S offers excellent visibility. A greater hood slope, expansive windshield, Daylite doors and rear cab window options contribute to more confident handling on even the most constricted job sites.

CANADIAN KENWORTH COMPANY6711 Mississauga Road N.Mississauga, Ontario L5N 4J8(905) 858-7000

®

T880S/16 © 2016 Kenworth Truck Co.

KENWORTH TRUCK COMPANYP.O. Box 1000Kirkland, Washington 98083-1000(425) 828-5000

Note: Equipment and specifications shown in this brochure are subject to change without notice. Consult with your Kenworth dealer at time of ordering for standard and optional equipment.

†Determined by Engine Horsepower and Idle Setting §Extended Protection Plans Available

SpecificationsConfiguration Inline 6-CylinderBore X Stroke (mm) 130 x 162Displacement 12.9 LitersDry Weight 2,600 lbs.Oil System Capacity 42 U.S. QuartsHorsepower 405-510 HPPeak Torque 1,450-1,850 lb.-ft.Governed Speed 2,200 RPMClutch Engagement Torque† 973 lb.-ft. @ 800 RPMB10 Design Life 1,000,000 Miles/ 1,600,000 KmBase Warranty§ 2 Years/250,000 Miles/400,000 Km

*Multi Torque Rating

†Determined by Engine Horsepower and Idle Setting §Extended Protection Plans Available

SpecificationsConfiguration Inline 6-CylinderBore x Stroke (mm) 123 x 152Displacement 10.8 LitersDry Weight 2,200 lbs.Oil System Capacity 39 U.S. QuartsHorsepower 335-430 HPPeak Torque 1,150-1,650 lb.-ft.Governed Speed 2,200 RPMClutch Engagement Torque† 737 lb.-ft. @ 800 RPMB10 Design Life 1,000,000 miles/ 1,600,000 KmBase Warranty§ 2 Years/250,000 miles/400,000 Km

*Multi Torque Rating

The T880S comes standard with the 12.9-liter PACCAR MX-13 engine, delivering the horsepower and torque needed to move large payloads with ease — even on steep grades and uneven surfaces. The 10.8-liter, PACCAR MX-11 engine, with its impressive power to weight ratio and low fuel consumption, is perfect for more weight sensitive applications by cutting weight by an additional 400 pounds. Trimming weight even further by about 100 pounds, PACCAR MX engines employ an advanced aftertreatment system that consolidates processing into a single canister — adding every saved ounce to payload capacity.

ALL THE POWER YOU NEED

RatingsPeak HorsePower (HP) Peak Torque (lb-fT @ rPm)

510 1,850 @ 1,000

485 1,650 @ 1,000

455 MT 1,550/1,750 @ 900*

455 1,650 @ 900

430 MT 1,450/1,650 @ 900*

430 1,550 @ 900

405 1,450 @ 900

Torque

Engine Speed (rpm)

Torq

ue (l

b-ft)

1,200

1,000

1,400

800

1,600

1,800

2,000

1,200

1,000

1,400

800

1,600

1,800

2,000

900 1,100 1,300 1,500 1,700

Hors

epow

er (h

p)

Engine Speed (rpm)

Horsepower550

500

450

400

350

300

250

200

150

550

500

450

400

350

300

250

200

150900 1,100 1,300 1,500 1,700 1,900700

1,900700

RatingsPeak HorsePower (HP) Peak Torque (lb-fT @ rPm)

430 1,650 @ 900

430 MT 1,450/1,650 @ 900*

415 1,550 @ 900

400 1,450 @ 900

375 1,350 @ 900

355 1,250 @ 900

335 1,150@ 900

Horsepower

Torque

Engine Speed (rpm)

Torq

ue (l

b-ft)

Hors

epow

er (h

p)

Engine Speed (rpm)

1,200

1,000

1,400

600

800

1,600

1,200

1,000

1,400

600

800

1,600

1,500 1,700 1,900

450

400

350

300

250

200

900 1,100 1,300 1,500 1,700

450

400

350

300

250

200

700 1,900

1,100 1,300900700

150 150

1,600 1,600