# katori blouse

Post on 29-Oct-2015

1.771 views

Embed Size (px)

DESCRIPTION

about katori blouse.. good instructionsTRANSCRIPT

Vani's blog 1

This blog deals with sewing Sewing Embroidery Crafts CookeryWEDNESDAY, MAY 18, 2011Method of stitching Katori Blouse

Basic sari blouse draft of front and back are prepared on a folded sheet of paper. Folded sheet is cut along the fold line and the draft of the back is removed. The remaining details are drawn on the front portion.For basic sari blouse draft please refer here.

Step 1Mark A-B the full length of blouse + 1 on the fold line.On this line Mark point K such that A-K = back neck depth =/12th chest or to taste.Mark point L on the line A-B such that A-L =front neck depth =1/8th chest or to taste.Mark point D on the line the line A-B such that A-D = scye depth = chest-1 or 1.For details about scye depth refer here.A-M = front length + .Draw perpendicular lines to the line A-B from the points A, D, M and B.On the perpendicular line at A mark A-C = shoulder + .On the perpendicular line at D mark point E such that D-E = chest +1.On the perpendicular line at M mark point N such that M-N = D-E.On the perpendicular line at B Mark F such that B-F = D-E.From the point C drop a Perpendicular. It meets the line D-E at the point H.On the line C-H mark points R such that C-R = or .Join the points G and R.Mark point J on the line C-H such that J-H = 1.Mark point I on the line B-F such that I-F = Join the points E and I.Line E-I intersects the line M-N at the point O.Join points K and G by a curved line as shown in the figure. This is back neck line.Join points L and G by a curved line as shown in the figure. This is Front neck line.Now cut along the line K-G-R-E-O-I-B.Separate front and back draft by cutting along the fold line K-L-D-M-B.Keep back draft (on which there are no markings) aside.Step 2

Take the front draft on which neck and front scye Markings are there.On the line D-E mark point Z such that Z-H = 1/2' to 3/4".This is for the bust measurements up to 33".For bust size more than 33" shift the point Z to towards H and continue.S is the midpoint of D-Z.From the points S and Z drop perpendiculars. These lines meet the line M-N at point 2 and 3. respectively. On the line S-2 mark point T such that S-T =1/8th chest -1.For further details about the point T see here.Through the point T and on either side, draw a line parallel to the line M-N. This line cuts the line A-M. at the point 4 and the line Z-3 at the point V.On the line A-M mark point P such that 4-P = 1. This is for chest measurement below 36".For bust measurements 36"andabove increase this measurement to1 or 1On the line Z-3 mark point Q such that V-Q = 1.This is for chest measurement below 36".For bust measurements 36"andabove increase this measurement to1 or 1Join P-T and T-Q.Paste a small piece of paper of width 2 along P-X outside the line A-M.Produce the line V-4 to U such that length of line P-T + the length of the line T-Q = length of the line V-U.Paste a small piece of paper of width 2 along the line M-N.Produce line 4-M to X such that 4-X = P-M.Produce line V-3 to W such that V-W =Q-3.Join U-X. On U-X mark point Y such that X-Y = 1.Join W-Y by a curved line as shown in the figure.Produce T-2. It cuts the line W-Y at point 5. At this point take a dart of .Point 1 is the midpoint of the front neck line. L-G. Join 1 and Z by a curved line as shown in the figure.There are three pieces in the draft. I have coloured them with different colours .Please see figure 3.

We have to separate them.Piece no 1 is side piece.Piece no 2 is Katora piece .Piece no 3 is Under bust piece.

Cut front neck line along the line L-I-G.Cut along the shoulder line G-R and front scye shape R-J-E. Cut along the E-O. Cut along O-3.Cut along the curve 1-Z-Q-V- 3. This is piece no 1 or side piece.To separate piece no 2 or Katora from piece no 3 or under bust piece cut along the line P-T-Q.Cut along the line U- 4 -T-V-3-W-5- X-Y-U to get under bust piece.

Waist band

1-2 = (A-B - A-M )=(Full length of the blouse Front length of the blouse) +.2 to 4 = M-O (refer fig 2) -1.4-3 = 1 to 2 - or 1.4 to 5 = .Join 1 and 3 by a curved line as shown.Join 3 and 5.Cot along 1-3-5-2-1.

Sleeves

Refer sari blouseWhile cutting the fabric take extra for seams as shown in the figure 5 by dotted lines. Arrow mark shows length wise of the cloth. To get good fitting the Katora piece which is coloured in green should be cut on bias as shown in the figure 5.

Stitching

Fold the under bust piece which is coloured blue along the line T-5 and stitch dart. Open the fold and press .See Figure 6 .

Place the under bust cover on the katora ,Keeping right sides together and place D on D, C on C and B on B . See figure 7. Stitch them together along the line D-C-B, from edge. Make small snips along the stitched edge taking care to not cut the stitches. Open and press. See figure 7.

Keep the side piece which is coloured pink on katora and under bust which are stitched together, keeping right sides together and Point A on A G on G and stitch away from the curved edge . Make small snips and turn the seam and press. See Figure 8

Out of 4 waist band pieces take 2 pieces of the belt and stitch them together along the edge I-J and turn the seam inside fold and press. Place the belt on under bust piece and side piece which are stitched together, matching points F and F and H and H. See figure 9.

This is left front of the blouse. Stitch right front also in the same manner.Complete sewing the blouse as an ordinary sari blouse.

You might also like:

Step frock

Pavade Blouse( Blouse worn on long skirt)

LinkWithinPosted byvaniat9:38 AMLabels:Method of stitching Katori Blouse16 comments:

CraftCravesaid...Just a quick note to let you know that a link to this post will be placed onCraftCravetoday [19 May 02:15am GMT]. Thanks, MariaMay 18, 2011 at 7:26 PM

nirmalasaid...thanks vani....very clearly explainedMay 18, 2011 at 8:58 PM

Mahalakshmisaid...Lovely tutorial Vani.Though I know this method I was not very confident in trying this out.Now that your tutorial is so good I will definitelygive it a try.May 23, 2011 at 6:27 AM

Flutepeacesaid...Hi Vani, Thanks for you lovely posts. Could you give me directions for making a multiple kalli skirt - skirts used for Kathak performances. How do I cut the kallis without wasting any material. I want them 2 1/2 inches(1/2 inch seam allowance on each side) near the waist which ultimately widens to 9 inches(1/2 inch seam allowance on each side) on the bottom.Thanks,ShaanJune 21, 2011 at 1:23 PM

Flutepeacesaid...Hi Vani, Thanks for you lovely posts. Could you give me directions for making a multiple kalli skirt - skirts used for Kathak performances. How do I cut the kallis without wasting any material. I want them 2 1/2 inches(1/2 inch seam allowance on each side) near the waist which ultimately widens to 9 inches(1/2 inch seam allowance on each side) on the bottom.Thanks,ShaanJune 21, 2011 at 1:24 PM

Vanisaid...Dear Vani, nice blog.. I'm happy to follow!July 24, 2011 at 9:06 PM

crochet worksaid...Hi VaniI made a bluse with high neck as per your instructions and it came out very well. What to know if the measurements are the same for a open back neck blouse, especially the shoulder and the front darts. Thanks

EmmaAugust 29, 2011 at 12:26 AM

vanisaid...Measurements are same for back neck blouse and front neck blouseAugust 29, 2011 at 1:50 AM

crochet worksaid...Hi Vani,

Would like to know how to adjust the shoulder and front darts for a open 'U' neck back of a saree blouse. Please also let me know how to stitch a simple salwar especially how to do the pleats for the front of salwar. Thanks EmmaAugust 31, 2011 at 3:32 AM

vanihegde63@gmail.comsaid...hai vani,Really i am requesting u for 2nd time about this deep neck katori blouse. i think high neck blouse neck is different from deep neck blouse cutting .Pls. will u help me about this cutting.except shoulder cutting everything is one and same?January 9, 2012 at 4:07 AM

vanisaid...Expect the shape of the neck and width of shoulder drafting is same.January 10, 2012 at 6:16 AM

vanihegde63@gmail.comsaid...thank u.I think shoulder deep is also less in the deep neck blouse( compering to high neck blouse)I have tried in many ways. so i am asking . I like your way of teaching.once again thank uJanuary 11, 2012 at 5:45 AM

Ariessaid...Dear Vani Mam, Can you please tell me the cause of falling shoulder in the saree blouse, the neck is a wide neck. Thanks.May 16, 2012 at 2:29 AM

Ariessaid...Dear Vani Mam, Can you please tell me the cause of falling shoulder in a saree blouse he neck is a wide neck. ThanksMay 16, 2012 at 2:32 AM

vidhya.suthakarsaid...madam please tell how to make saree blouse knot?i don't no how to stitch the blouse knotMay 21, 2012 at 5:04 AM

Rashmisaid...thanks for this tutorial.just wanted to know when you are adding extra 1",what does it denotes:inches or centimetres.please advice.

October 5, 2012 at 12:52 AMPost a CommentNewer PostOlder PostHomeSubscribe to:Post Comments (Atom)MY BLOG LIST Vani's blog 2My images in an other blog10 months ago Inspired By Life...

Parchment craft1 year ago Puttu's kitchenIdli uppittu1 year agoThere was an error in this gadget

123MYFREE COPYRIGHT

ABOUT ME

vaniI am a person with simple tastes. like teaching. COPYRIGHT Please contact me if you want to use the images or text from this site. You are welcome to link to this blog and to any post of this blog. Do NOT post my tutorials on your sites without adding the hyperlink clearly in your site. Do NOT translate tutorials from this blog into other languages on your site.View my complete profileCOPYSCAPE

GOOGLE TRANSLATE

Powered byTranslateLABELS A line frock -variation 1 A line frock

Recommended