jim and lynette share their thermospas installation experience
TRANSCRIPT
The delivery and installation process of our new Thermospas Concord 4-5 Person Spa.
Thermospas Hot Tub Delivery
These are pictures of our backyard before... and after the hot tub installation. Big difference!
We've used our Thermospas every day since we got it (except for a few days when we are away).
Our Thermospas hot tub arrived on a flat bed.
The delivery men use a heavy-duty dolly to carry the 900 lb. hot tub through our gate!
The process of positioning the hot tub included leaving clearance space around all sides of the hot tub and shimming one side of the spa. We had our hot tub exactly where we wanted it,
thanks to our free home site inspection.
The next part of our Thermospas hot tub installation was learning how it worked.
Getting to know our new Hot Tub
The first step was to remove the 2 outer side panels and cut through the styrofoam.
This was the only side that needed to be removed since this is where the motor and
pumps are located.
The Thermospas delivery guy was an expert, and explained all the parts of our hot tub and
how they worked.
We found out how easy it was to remove the side panels (it's just a couple screws) and the
panels are reversible!
The Thermospas delivery guy then went over chemicals, filters and the maintenance of our
new Thermospas hot tub.
After getting some pointers from the Thermospas delivery guy, we filled up our tub
with 300 gallons of water and then checked the ph levels.
We were so excited about our new Thermospas hot tub, we didn't want to wait the 4 hours to
get in, so it was a bit cold...
...But it was worth it!
Luxury Hot Tubs Made Affordable
www.thermospas.com