ipads — improved position and azimuth determining system · ipads — improved position and...

2

Click here to load reader

Upload: hoangcong

Post on 06-Jul-2018

214 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: IPADS — ImProveD PoSItIon AnD AzImuth DetermInIng SyStem · IPADS — ImProveD PoSItIon AnD AzImuth DetermInIng SyStem ... Improved Position and Azimuth Determining ... and affordability

I P A D S — I m P r o v e D P o S I t I o n A n D A z I m u t h D e t e r m I n I n g S y S t e m

Space & Navigation

S e l f - C o n t a i n e d A r t i l l e r y I n e r t i a l S u r v e y i n g S y s t e m

When You need PreCISIon, You need IPAdS

L-3 Space & Navigation (S&N)

Improved Position and Azimuth

Determining System (IPADS) is a

self-contained inertial surveying system developed to meet

today’s demanding U.S. Army and Marine Corps survey

needs. Survey operations functionality, navigational accuracy,

transportability, survivability and affordability requirements drove

the system design.

L-3 S&N’s IPADS provides significant enhancements for today’s

Army and Marine Corps survey teams. While meeting PADS

accuracy and environmental requirements, IPADS offers a proven,

reliable, lightweight, off-the-shelf solution developed around four

line-replaceable units (LRUs).

• Compact Position/ Navigation Unit (CPNU)

• Control and Display Unit (CDU)

• Battery and Charger Unit (BCU)

• Porro Prism Assembly (PPA)

All LRUs are housed in a

robust frame that allows for

easy component access and

stability while facilitating

ready, two-person transfer

between vehicles and aircraft.

FeAtureS

• High-precision common survey delivers efficient mass fires

• Impervious to jamming

• Resistant to jamming (GPS-aided mode)

• Navigation aids (compass rose and digital maps)

• In-vehicle survey

• Combat-proven

• Embedded built-in test (BIT)

• High reliability MTBF, low mean time to repair (MTTR)

• No periodic calibration required

Use

of

U.S

. D

oD

imag

ery

do

es n

ot

imp

ly o

r co

nstit

ute

Do

D e

ndo

rsem

ent.

Page 2: IPADS — ImProveD PoSItIon AnD AzImuth DetermInIng SyStem · IPADS — ImProveD PoSItIon AnD AzImuth DetermInIng SyStem ... Improved Position and Azimuth Determining ... and affordability

Space & Navigation

I P A D S — I m P r o v e D P o S I t I o n A n D A z I m u t h D e t e r m I n I n g S y S t e m

S p e c i f i c a t i o n s

L-3 Space & navigation

450 Clark Drive

Budd Lake, NJ 07828

Tel: 973.446.4000

Fax: 973.446.4268

email: [email protected]

www.L-3com.com/SpaceNav

This information has been released into the public domain in accordance with the International Traffic in Arms Regulation (ITAR) 22 CFR 120.11(a)(7). Specifications subject to change without notice. Call for latest revision. All brand names and product names referenced are trademarks, registered. Data, including specifications, contained within this document are summary in nature and subject to change at any time without notice at L-3 Communications’ discretion. Call for latest revision. All brand names and product names referenced are trademarks, registered trademarks, or trade names of their respective holders. 10/13

ComPACt PoSItIon/nAvIgAtIon unIt (CPnu)

The CPNU, a three-axis strap-down inertial navigation system of ring laser gyros and high-grade accelerometers, is the core component of IPADS. It is the compact version of our proven navigation system used on the MLRS (Multiple Launch Rocket System) and HIMARS (High-Mobility Artillery Rocket System) programs.

ControL And dISPLAY unIt (Cdu)

IPADS uses the Tacter-31 Rugged Handheld Computer (RHC) as its CDU. This capitalizes on the existing logistics support coverage and provides significant life-cycle cost benefits. The RHC is a standard IBM® PC with an Intel® Pentium II 500 MHz processor, Windows® 2000, a 6.4-inch VGA color active matrix LCD display and a QWERTY keyboard. The CDU offers the Tactical Communication Interface Modem (TCIM) as an option.

Porro PrISm ASSembLY (PPA)

The PPA increases the IPADS’ 16-m offset capability by 50%. IPADS can also provide distance point (target) location capability with the use of optional accessories such as a hand-held laser rangefinder mounted on existing P2/P16 theodolites or a total system.

bAtterY And ChArger unIt (bCu)

The BCU uses a standard U.S. Army NSN 6130-01-493-6643 Sealed Lead Acid (SLA) battery. The BCU is based on the ABPAC.DC/BT-TR-1 Transceiver Power Unit (TPU) that is currently fielded by the U.S. military. The unit allows for worldwide input of 9 to 36 VDC / 85 to 270 VAC, 47 to 440 Hz, single-phase power inputs and provides power and charge status indicators.

PerFormAnCe

4th-order Accuracy Azimuth 0.4 mil PE (Probable Error), 0 ° to 65 ° N/S latitude 0.6 mil PE, 65 ° to 75 ° N/S latitude Horizontal 4 m CEP (Circular Error Probable) Vertical < 2 m PE 5-min. ZUPT (Zero Velocity Update)

5th-order Accuracy Azimuth 0.4 mil PE, 0 ° to 65 ° N/S latitude 0.6 mil PE, 65 ° to 75 ° N/S latitude Horizontal 7 m CEP Vertical 3 m PE 10-min. ZUPT

ChArACterIStICS

Weight 135 lb., 61 kg 137 lb., 62 kg with GPS

Dimensions 24.75 in. L x 15.75 in. W x 16.125 in. H 62.87 cm x 40.01 cm x 40.96 cm

Power Consumption < 7 A @ 28 vdC 9 to 36 vdC / 85 to 270 vAC