international congress on science and technology of ... · pdf fileintroduction the 7th...
TRANSCRIPT
index INTRODUCTION 3 ICS 2018 BACKGROUND 3 INTERNATIONAL ADVISORY BOARD 4 ORGANIZING COMMITTEE 4 OPENING SESSION 5 CONTINUOUS CASTING
FLUID FLOW & SOLIDIFICATION 5 / 10 / 15 / 20
SLAB QUALITY CONTROL 21 / 25
MOLD FLUXES 27 / 28 / 37 EAF STEELMAKING 7 / 12 / 17 ELECTRO SLAG REMELTING 37 HOT METAL PRETREATMENT 39 INDUSTRY 4.0 & AUTOMATION 40 / 41 OXYGEN STEELMAKING 6 / 11 NON-METALLIC INCLUSIONS 16 / 21 / 26 / 35 PRODUCTS & TECHNOLOGY 31 / 32 / 36 / 40 PROCESS FUNDAMENTALS 8 / 13 / 18 / 23 / 31 SECONDARY REFINING 22 / 29 SUSTAINABILITY & ENVIRONMENT, RECYCLING & USE OF BY-PRODUCTS 30 / 38 XXVI CONVEGNO NAZIONALE TRATTAMENTI TERMICI
CERIMONIA D’APERTURA (in Italian language) 9
PROCESSI E IMPIANTI (in Italian language) 14 / 19
RIVESTIMENTI E IMPIANTI (in Italian language) 19
HT & SE I – COATINGS & SURFACE ENGINEERING 24
HT & SE II – APPLICATIONS 33
HT & SE III – MASSIVE HEAT TREATMENTS 34
HT & SE IV – PROCESS & PLANTS 42
HT & SE V – STAINLESS STEELS 42
POSTER SESSION 43 / 44 EIT RAW MATERIALS WORKSHOP 24 TIME TABLE 50 / 51
GENERAL INFORMATION 45 - 49 CONGRESS VENUE; LANGUAGE; PROCEEDINGS; CONGRESS SCHEDULE; ACCOMMODATION; LIST OF HOTELS; REGISTRATION FEES; SPEAKERS REGISTRATION; ADVANCE REGISTRATION; SPEAKERS CANCELLATION AND REFUND POLICY; CANCELLATION AND REFUND POLICY; INSURANCE; VISA APPLICATION FORM; EXHIBITION & SPONSORSHIP OPPORTUNITIES; VENICE; SOCIAL PROGRAMME
REGISTRATION FORM 52
2
INTRODUCTION
The 7th International Congress on Science and Technology of Steelmaking (ICS 2018) will be organized by AIM, the Italian Association for Metallurgy, in Italy in June 2018. ICS 2018 will provide a forum for researchers and manufacturers involved in the scientific and technical developments of steelmaking. This meeting is aimed at creating an opportunity for a technical exchange at an international level among the numerous experts involved in the steelmaking. AIM will host as an integral part of ICS 2018 its traditional Conference on Heat Treatments - XXVI Convegno Nazionale Trattamenti Termici - which will start on 13 June, with a whole day in Italian language for Italian technicians and researchers and will go on the following days with technical sessions exclusively in English language. Therefore the topics of ICS 2018 will be integrated with the topics of Heat Treatments and Surface Engineering.
We kindly invite you to participate in ICS 2018 and are looking forward to meeting you in Venice!
BACKGROUND
1996 Japan 2008 Japan 2001 United Kingdom 2012 Germany 2005 USA 2015 China
3
INTERNATIONAL ADVISORY BOARD Chairman: prof. Carlo Mapelli - Politecnico di Milano, Italy Co-chairmen: prof. Dong -Joon Min - Yonsei University, Korea prof. Johannes Schenk - Montanuniversitaet Leoben, Austria prof. Dieter Senk - RWTH Aachen University, Germany Members: Australia Peter Hayes - University of Queensland Oleg Ostrovski - The University of New South Wales Austria Christian Bernhard - Montan University Leoben Canada Kenneth S. Coley - McMaster University China Wanlin Wang - Central South University Xinhua Wang - Shougang Group Corporation Ltd. Jian Yang - Shanghai University Lifeng Zhang - University of Science and Technology Beijing Miaoyong Zhu - Northeastern University Finland Lauri Holappa - Aalto University France Jean Lehmann - ArcelorMittal Research Germany Piotr R. Scheller - TU Bergakademie Freiberg India Deo Brahma - IIT Kanpur Govind S. Gupta - IIS Bangalore Dipak Mazumdar - IIT Kanpur Italy Giovanni Bolelli - Università degli Studi di Modena e Reggio Emilia Riccardo Carli - Prosimet Mario Cusolito – Associazione Italiana di Metallurgia Donato Firrao - Politecnico di Torino Marina G. La Vecchia - Università degli Studi di Brescia Roberto Pancaldi - Tenova Massimo Pellizzari - Università degli Studi di Trento Francesco Zaglio - Ormis Japan Shin-Ya Kitamura - Tohoku University Kazuki Morita - University of Tokyo Katsuhiro Sasai - Nippon Steel & Sumitomo Metal Corporation Fumitaka Tsukihashi - University of Tokyo Korea Jung-Wook Cho - GIFT Postech Hae- Geon Lee - POSTECH Jong Jin Pak - Hanyang University Russia Anatoly G. Svyazhin - Moscow Institute of Steel and Alloys South Africa Hurman Rauf Eric - University of the Witwatersrand Sweden Seshadri Seetharaman - Royal Institute of Technology The Netherlands Rob Boom - Delft University of Technology USA Brian G. Thomas - University of Illinois
ORGANIZING COMMITTEE Federica Bassani - AIM, Italy Mariangiola Brisotto - Università degli Studi di Brescia - President of AIM Coatings & Tribology Technical Committee Guido Capoferri - Consultant, Italy - President of AIM Plastic Deformation of Metals Technical Committee Sabrina De Donato - AIM, Italy Maurizio Fusato - Feralpi Siderurgica, Italy - President of AIM Safety & Environment Technical Committee Francesco Magni - 432group, Italy - President of AIM Steelmaking Technical Committee Carlo Mapelli - AIM, Italy Danilo Petta - Gearchem, Italy - President of AIM Heat Treatment and Metallography Technical Committee Gabriele Rampinini - Forgiatura A. Vienna, Italy - President of AIM Forge Technical Committee
4
12 June 2018 17.00 – 18.30 Opening of the registration for attendees
Wednesday, 13 June 2018 - room 3 OPENING SESSION
9.00 Welcome addresses by Congress Chairmen
9.15 Strong potential of commercialized high Mn steel products and process for various applications ICS 003 J. Choi - POSCO technical research laboratories, Korea
9.45 Thermodynamic re-assessment of Fe-Si and Fe-Si-C systems ICS 062 E. Ahtoy, F. Oudich, J. Lehmann, M. Bobadilla - ArcelorMittal Maizières Research, Maizières-lès-Metz Cedex, France
10.15 Hybrid mould lubrication: perspective and advantages ICS 290 C. Mapelli - Politecnico di Milano, Italy R. Carli - Prosimet, Italy
10.45 coffee break
CONTINUOUS CASTING – FLUID FLOW & SOLIDIFICATION I CHAIRPERSONS:
11.45 Keynote: State of the art in high-temperature mold simulator study of initial solidification in ICS 212 continuous-casting mold P. Lyu, W. Wang - Central South University, Hunan, China
12.10 Modelling of mechanical agitation and throughput control in steelmaking transfer vessels: ICS 031 numerical simulation and experimental validation Z. Alam, Krshnavtar, D. Mazumdar - Indian Institute of Technology Kanpur, India
12.30 Numerical modeling of bubbly flow in continuous casting mold using two population balance ICS 043 approaches Z. Liu - Northeastern University, Shenyang, China and University of Leoben, Austria A. Vakhrushev, M. Wu, A. Ludwig - University of Leoben, Austria B. Li - Northeastern University, Shenyang, China G. Xu - Baowu Steel Group Corporation Limited, Shanghai, China
13.10 lunch WEDNESDAY 13 JUNE ROOM 1
5
Wednesday, 13 June 2018 - room 1
OXYGEN STEELMAKING I CHAIRPERSONS:
11.45 Keynote: Reaction near hotspot in refining of molten iron during supplying top-blown oxygen ICS 180 and powder additives Y.-I. Uchida - Nippon Institute of Technology, Japan
12.10 A modified off-gas model for end-point carbon prediction based on bath mixing degree ICS 120 Q. Liu, L. Cao, W. Lin, N. Li, J. Sun, Z. Zhang - University of Science and Technology Beijing, China S. Liao - Xinyu Iron and Steel Group Co.Ltd, Jiangxi, China K. Ren - Shandong Iron and Steel Group, China
12.30 Dissolution behaviour of ULC steel in carbon saturated hot metal ICS 070 F.M. Penz - K1-MET GmbH, Linz, Austria J. Schenk - K1-MET GmbH, Linz, Austria and Montanuniversität Leoben, Austria R. Ammer - voestalpine Stahl GmbH, Linz, Austria K. Pastucha - Primetals Technologies Austria GmbH, Linz, Austria B. Maunz - voestalpine Stahl Donawitz GmbH, Donawitz, Austria
12.50 A model for scrap melting in De-P BOF ICS 154 S. Deng, A. Xu, R. Yin - University of Science and Technology Beijing, China
13.10 lunch
6
Wednesday, 13 June 2018 - room b
EAF STEELMAKING I CHAIRPERSONS:
11.45 Keynote: Technologies of purification production in Electric Arc Furnace steelmaking ICS 026 processes in China G. Wei, R. Zhu, K. Dong, X. Wu - University of Science and Technology Beijing, China
12.10 Prospects of plasma analysis for electric arc furnaces ICS 228 H. Pauna, M. Aula, T. Fabritius - University of Oulu, Finland T. Willms, T. Echterhof - RWTH Aachen University, Germany
12.30 Optimization of EAF process charging hot -metal for special steel ICS 065 JD. Kim, DH. Shin, JO. Jo, CH. Chang, SI. Yang, CH. Wee - Hyundai Steel, Dangjin, Korea
12.50 Yield improvement with electromagnetic stirring in electric arc furnace ICS 008 L. Teng, O. Sjöden - ABB AB, Västeras, Sweden
13.10 lunch
7
Wednesday, 13 June 2018 - room e
PROCESS FUNDAMENTALS I CHAIRPERSONS:
11.45 Keynote: Arc plasma emerging from the foaming slag – Plasma diagnostics and visual ICS 234 observations M. Aula, H. Pauna, T. Fabritius - University of Oulu, Finland N.A.I. Andersson, C.Y.C. Jonsson - KTH Royal Institute of Technology, Sweden
12.10 Foaming behavior of the iron oxide containing slags and MgO saturated slags ICS 185 Y. Park, D.J. Min - Yonsei University, Korea
12.30 Steel dephosphorisation using CaO-SiO2-MgO-FetO-(MnO-Al2O3-P2O5) slag systems ICS 045 P.B. Drain, B.J. Monaghan, R.J. Longbottom, G. Zhang - University of Wollongong, Australia M.W. Chapman, S.J. Chew - BlueScope Iron & Steelmaking Technology, Australia
12.50 A thermodynamic database for calculation of steel and slag interactions ICS 127 L. Kjellqvist - Thermo-Calc Software AB, Sweden
13.10 lunch
8
Wednesday, 13 June 2018 - room 4
xxvi convegno nazionale trattamenti termici
CERIMONIA D’APERTURA (*)
11.45 Saluto di benvenuto e conferimento del Premio “Elio Gianotti” 12.10 Memoria d’apertura E. Morgano - FCA CRF, Italy
12.40 Memoria d’apertura M. Pellizzari – Università di Trento, Italy 13.10 lunch
(*) PRESENTATIONS IN ITALIAN LANGUAGE
9
Wednesday, 13 June 2018 - room 3
CONTINUOUS CASTING – FLUID FLOW & SOLIDIFICATION II chairpersons:
14.15 Keynote: Role of process and design parameters on evolution of centreline segregation in slab ICS 285 caster R. Shankar Tiwari - Tata Steel Jamshedpur, Jharkhand, India R. Kumar - Citi Service Center, Pune, India A.K. Singh - IIT Kanpur, India
14.40 Influence of bubbles on mass transfer coefficient between liquid steel and slag ICS 224 L.D. De Oliveira Campos, P. Gardin, M. Cornille, J. Lehmann - ArcelorMittal Global R&D, Maizières-lès-Metz, France S. Vincent - Université Paris-Est, Marne-La-Vallée, France J-P. Caltagirone - IPB, Pessac, France
15.00 Numerical study on hypo pritectic non-equilibrium transformation in continuous casting process ICS 110 J. Jo, K. Yi - Seoul National University, Korea
15.20 Numerical modelling of the MHD flow in continuous casting mold by two CFD platforms ANSYS ICS 159 Fluent and OpenFOAM Z. Liu - Northeastern University, China and University of Leoben, Austria A. Vakhrushev, M. Wu, A. Ludwig - University of Leoben, Austria G. Nitzl, Y. Tang, G. Hackl - RHI Magnesita, Austria
15.40 Numerical modeling of V-shaped segregation in continuous casting blooms ICS 101 R. Guan, C. Ji, M. Zhu - Northeastern University, Shenyang, China
16.00 Influence of FC-Mold on flow pattern and entrapment of inclusions in continuous casting strand ICS 263 S. Wang, W. Chen, X. Zhang, L. Zhang - University of Science and Technology Beijing, China
16.20 coffee break
10
Wednesday, 13 June 2018 - room 1
OXYGEN STEELMAKING II CHAIRPERSONS:
14.15 Keynote: Development and application of high efficiency blowing technology of converters in ICS 034 Shougang P. Gao, X. Wang - Shougang Group Co. Ltd., Beijing and University of Science and Technology Beijing, China H. Li, Y. Guo, Y. Zhang, X. Zhao - Shougang Group Co. Ltd., Beijing, China H. Yu - University of Science and Technology Beijing, China
14.40 Effect of converter dart design aspects on its settling behaviour ICS 241 S. van Oord, H-J. Visser - Tata Steel, Ijmuiden, The Netherlands
15.00 Decomposition and dissolution of limestone in converter slag: Laboratory experiment ICS 184 M. Chen, H. Deng, N. Wang - Northeastern University, China
15.20 Wettabilty of liquid slags on refractory during splashing process ICS 189 Y. Chung - Korea Polytechnic University, Korea S. Kim - POSCO C&C, Korea J.O. Jo, H.B. Ji - Hyundai Steel Company, Korea
15.40 A comparative study on refractory wear associated with fluxes for AOD slags ICS 015 V-V. Visuri, R. Mattila, T. Fabritius - University of Oulu, Finland P. Kupari - Outokumpu Stainless Oy, Tornio, Finland
16.00 Investigation to reduce severe erosion in the basic oxygen furnace (BOF) vessel at TATA Steel, ICS 270 India M.K. Singh, R. Agrwal, A. Kumar, B. Ghosh, D. Das, S. Pathak - TATA Steel Limited, Jamshedpur, India D. vander Plas, H. Pronk - Tata Steel Ijmuiden BV, the Netherlands
16.20 coffee break
11
Wednesday, 13 June 2018 - room b
EAF STEELMAKING II CHAIRPERSONS:
14.15 Keynote: Supervision of estimated EAF raw-material properties by statistical analysis of ICS 233 process model calculation errors E. Sandberg, J. Björkvall - Swerea MEFOS, Lulea, Sweden P. Strandberg - Outokumpu Stainless AB, Sweden
14.40 Tenova iEAF at Nucor Steel Seattle: Real-time mass and energy balance for EAF optimization ICS 279 H. Iyer, B. Babaei, V. Scipolo - Tenova Goodfellow Inc., Mississauga, Canada C. Cossette - Nucor Steel Seattle, USA
15.00 Evaluation of the effects of lime injection on the Electric Arc Furnace performances ICS 283 D. Mombelli, C. Mapelli, S. Barella, A. Gruttadauria - Politecnico di Milano, Italy L. Angelini, N. Mora, P. Frittella - Feralpi Holding spa, Lonato del Garda (BS), Italy R. Moreschi, R. Marras, G. Bruletti - Unicalce spa, Val Brembilla (BG), Italy
15.20 Effect of foamy slag in electric arc furnace on energy efficiency ICS 162 A. Agnihotri, M. Gupta, D. Singh, S.S. Tippannavar, S.K. Tuli - Vardhman Special Steels Ltd., Ludhiana, India P.K. Singh - IIT Kanpur, India
15.40 Refractory condition monitoring and lifetime prognosis ICS 106 A. Viertauer, G. Lammer - RHI Magnesita, Austria P. Bloemer - RHI Magnesita, Sweden
16.00 Manufacturing cost reduction in steel making by electrode coating ICS 060 D.P. Kushwaha, V. Badwani, H. Pandey, A. Khokhar, S. Singh - Jindal Steel & Power Limited, India
16.20 coffee break
12
Wednesday, 13 June 2018 - room e
PROCESS FUNDAMENTALS II CHAIRPERSONS:
14.15 Keynote: Kinetics of hydrogen plasma smelting reduction of iron oxides ICS 006 M. Naseri Seftejani, J. Schenk - Montanuniversitaet Leoben, Austria
14.40 The mechanism of absorption O2, N2, H2 at oxidation of liquid iron and Fe - C alloys by ICS 032 gaseous oxygen A.G. Svyazhin, V.E. Kindop - National University of Science and Technology “MISIS”, Moscow, Russia
15.00 Effect of steel composition and refractory material on nozzle clogging phenomenon ICS 064 K. Taguchi, N. Yoshida, Y. Tsukaguchi - Nippon Steel & Sumitomo Metals Corporation, Japan
15.20 Properties related to dual-phase fluid of molten slags characterized under alternative ICS 161 current field N. Saito, Y. Harada, K. Nakashima - Kyushu University, Japan
15.40 Local structure of iron ions in 35mass%FeOx-CaO-SiO2 liquid slag in terms of activity of FeO1.33 ICS 088 M. Hayashi, M. Susa - Tokyo Institute of Technology, Japan
16.00 Mn-Fe-C hybrid Pellet’s recarburization mechanism and its application in molten steel ICS 016 Shanghai University, China L.Y. Dai - Shentek, Shanghai, China
16.20 coffee break
13
Wednesday, 13 June 2018 - room 4
xxvi convegno nazionale trattamenti termici
PROCESSI E IMPIANTI (*) PRESIEDE:
14.20 Messa a punto di un impianto di tempra a induzione in atmosfera controllata ICS 214 Set up of a line for induction hardening in inert atmosphere L. Frare, A. Casagrande - GI. DI. Meccanica spa, Vazzola (TV), Italy C. Gennari, I. Calliari, E. Ramous - DII Università di Padova, Italy
14.40 An experimental comparison between traditional and die assisted quenching manufacturing ICS 170 processes aided by multi-physical modelling F. Lenzi, G. Campana - Università di Bologna, Italy A. Zanotti - Proterm spa, Calderara di Reno (BO), Italy
15.00 Innovative concept for hardening and tempering of alloyed steel bars ICS 153 F. Milanolo, A. Nepote - Danieli Centro Combustion, Italy
15.20 Confronto tra tecniche di tempra su acciai da utensili: analisi dei dati sperimentali e ICS 229 da simulazione su come ottenere le migliori performances dal trattamento termico S. Delpino, R. Ferrario, S. Semenzin - Franisa Tempra Acciai Speciali srl, Italy P. Martelli, L. Valente, C. Viscardi - ECOTRE Valente srl, Italy
15.40 Overview on low pressure carburizing and residual stress profiles in the shot peening ICS 082 controlled E. Morgano - FCA CRF, Italy
16.00 Inductive fixture hardening and tempering: A big step forward in gear manufacturing ICS 140 E. Carutti - Carutti srl, Milano, Italy W. Goy - EMA Indutec GmbH, Meckesheim, Germany
16.20 coffee break
(*) PRESENTATIONS IN ITALIAN LANGUAGE
14
W
Wednesday, 13 June 2018 - room 3
CONTINUOUS CASTING – FLUID FLOW & SOLIDIFICATION III CHAIRPERSONS:
16.45 Keynote: Key lubrication concepts to understand the role of flow, heat transfer and ICS 230 solidification for modelling defect formation during continuous casting P.E. Ramirez Lopez, P.N. Jalali, U. Sjöström - Swerea MEFOS AB, Lulea, Sweden P. Jonsson - KTH Royal Institute of Technology, Stockholm, Sweden K.C. Mills - Imperial College London, United Kingdom I. Sohn - Yonsei University, Seoul, Korea
17.10 Effect of casting speed on hot ductility of micro-alloyed steels during continuous casting ICS 269 H. Ibrahim, H. Palkowski - Clausthal University of Technology, Clausthal-Zellerfeld, Germany
17.30 Study oon oscillation marks and hooks at the corner in continuous casting of steel slabs ICS 264 X. Zhang, W. Chen, W. Yang, L. Zhang - University of Science and Technology Beijing, China
17.50 Influences of SEN structure on fluid flow characteristics and temperature distribution in ICS 201 medium-thin slab continuous casting mould M. Xuan, N. Wang, M. Chen - Northeastern University, China
18.10 Influence of electropulsing treatment on the initial solidification of molten steel during ICS 211 the process of continuous casting G. Ying, W. Wang - Central South University, Hunan, China
18.30 Research methods of sub-rapid solidification and its related heat transfer phenomena ICS 210 in strip casting C. Zhu, W. Wang - Central South University, Hunan, China
15
Wednesday, 13 June 2018 - room 1
NON-METALLIC INCLUSIONS I CHAIRPERSONS:
16.45 Keynote: Thermodynamics and kinetics for the evolution of non-metallic inclusions in pipeline ICS 261 steels Y. Zhang, Y. Ren, L. Zhang - University of Science and Technology Beijing, China
17.10 Fining of alumina inclusion particles in steel ICS 036 R. Inoue, Y. Takasaki, A. Shibayama - Akita University, Japan S . Nakata - Aichi Steel Corp., Japan formerly, Akita University, Japan A. Okayama - Nippon Steel & Sumitomo Metal Corp., Japan
17.30 Effect of calcium treatment on control of non-metallic inclusions in high quality low ICS 063 oxygen special steel Z-W. Hou, M. Jiang, E-J. Yang, X-H. Wang - University of Science and Technology Beijing, China
17.50 The optimization of steelmaking conditions to reduce macro inclusion for special steel ICS 091 G. Park, J. Shin, H. Kim, J. Lee, C. Chang - Hyundai Steel, Danghin, Korea D. Jeon, J. Kim - Hyundai Steel, Pohang, Korea J. Park - Hanyang University, Ansan, Korea
18.10 Study on inclusion control of automotive valve spring steel ICS 196 Z. Chen, G. Yang, Y. Xu, G. Wan - Baoshan Iron and Steel Co. Ltd., China
18.30 Research on alumina inclusions in IF steels during RH refining process ICS 104 Y. Ji, M. Jiang - University of Science and Technology Beijing, China F. Huang - Shougang Qiangang Iron and Steel Co. Ltd, China X. Wang - Shougang Research Institute of Technology, China
16
Wednesday, 13 June 2018 - room b
EAF STEELMAKING III CHAIRPERSONS:
16.45 Keynote: Latest results in EAF optimization of scrap-based melting process: Q-MELT ICS 246 installation in Kroman Celik M. Ansoldi, D. Patrizio - Danieli & C. Officine Meccaniche spa, Buttrio, Italy M. Piazza - Danieli Automation spa, Buttrio, Italy O. Kuran - Kroman Celik San. A.Ş., Darıca/Kocaeli, Turkey
17.10 Mechanism of spinel formation in chromium rich slag ICS 147 J. Burja, F. Tehovnik, B.S. Batič - Institute of Metals and Technology, Slovenia J. Medved - Faculty of Natural Sciences and Engineering, Slovenia
17.30 Detection of EAF Water Leaks at Lucchini RS, Lovere , Italy based on off-gas EFSOP® ICS 280 technology M. Luccini, V. Scipolo - Tenova Goodfellow Inc., Mississauga, Canada L. Poli - Lucchini RS spa, Lovere (BG), Italy
17.50 Bypassing problems related to water cooling: case study for applying ILTEC in an 100-ton EAF ICS 020 M.B. Hanel - Mettop GmbH, Leoben, Austria A. Filzwieser - PolyMet Solutions GmbH/Mettop GmbH, Leoben, Austria R. Degel - SMS group GmbH, Düsseldorf, Germany
18.10 Excelsior EAF, a step ahead. Sarralle integral melting technology and industry 4.0 challenge ICS 099 E. Sedano, J. Serrano, J. San José - Sarralle Equipos Siderurgicos S.L., Spain
17
Wednesday, 13 June 2018 - room e
PROCESS FUNDAMENTALS III CHAIRPERSONS:
16.45 Keynote: Effects of Al2O3 and MgO on phase relationship of the CaO-FeOx-SiO2 system ICS 112 X. Yang, F. Tsukihashi - The University of Tokyo, Chiba, Japan
17.10 Critical evaluation and optimization of the thermodynamic properties and phase ICS 138 diagrams of the CaO-SiO2-TiO2-Ti2O3 system X. Du - McGill University, Canada I.-H. Jung - Seoul National University, Korea
17.30 Heat flux extracted from steel plate with iron oxide scale by water boiling ICS 027 M. Susa, Y. Ohsugi, R. Endo, M. Ueda - Tokyo Institute of Technology, Japan
17.50 Modeling of two phase, gas-liquid flows in ladle shroud ICS 130 P.K. Singh, R.K. Tiwari D. Mazumdar - Indian Institute of Technology, Kanpur, India A. Dutta - KU Leuven, Belgium
18.10 Thermodynamic study on the effect of Si on the precipitation of MnS in solid Fe ICS 218 S.J. Lee, Y. Kang - Dong-A University, Korea S. Lee - POSCO, Korea
18.30 The development of dynamic free lance for injection metallurgy of steelmaking decarburization ICS 143 and desulphurization Q. Fan - Fansmelt, Melbourne, Australia A. Xu - University of Science and Technology Beijing, China L. Wu, Y. Jang - Masteel Group Corporation, China
18
Wednesday, 13 June 2018 - room 4
xxvi convegno nazionale trattamenti termici
PROCESSI E IMPIANTI (*) PRESIEDE:
16.50 Caratterizzazione microstrutturale e proprietà meccaniche di acciai bassolegati temprati e ICS 294 rinvenuti a bassa temperatura
Microstructural and mechanical characterization of quenched and low-temperature tempered low alloy steels D. Firrao, P. Matteis - Politecnico di Torino, Italy A. De Sario - VI.MI. Fasteners, Novellara (RE), Italy
17.10 Ottimizzazione del trattamento termico di ricottura in un processo di trafilatura a ICS 220 freddo della lega di titanio Ti-6Al-4V ELI A.F. Ciuffini - Politecnico di Milano
17.30 Ottimizzazione del trattamento di ricottura di una lega Pt950Ru per gioielleria ICS 168 Optimization of softening heat treatment for the Pt950Ru jewelry alloy L. Pezzato, A. Minotto, K. Brunelli, M. Dabalà - Università di Padova, Italy
RIVESTIMENTI E IMPIANTI (*)
PRESIEDE:
17.50 Modifica delle proprietà tribologiche del DLC mediante texturing
Modification of tribological properties of DLC coating through texturing ICS 103 D. Romagnoli, F. Lavalle - STS srl, Casalecchio di Reno (BO), Italy L. Montesano, M. Surfaro, L. Giorleo, G.M. La Vecchia - Università di Brescia, Italy
18.10 La tenacità dell'acciaio AISI M2 sottoposto a trattamento criogenico post-rinvenimento ICS 163 Influence of a post-tempering cryogenic treatment on the toughness of the AISI M2 steel R. Sola, P. Veronesi, R. Giovanardi - Università di Modena e Reggio Emilia, Italy M. Merlin, G. L. Garagnani, C. Soffritti - Università di Ferrara, Italy A. Morri - Università di Bologna, Italy G. Parigi - Stav, Barberino del Mugello (FI), Italy
18.30 Prevenzione dell’inquinamento ed efficienza dei processi ICS 281 Pollution prevention and process efficiency L. van Schie - Esselent solutions b.v., Drunen, the Netherlands G. Rosso - Silco srl, Rivalta (TO), Italy
(*) PRESENTATIONS IN ITALIAN LANGUAGE
19
W
Thursday, 14 June 2018 - room 3
CONTINUOUS CASTING – FLUID FLOW & SOLIDIFICATION IV CHAIRPERSONS:
8.45 Keynote: Numerical modeling of solidification structure formation under molten steel flow ICS 221 H. Harada - Nippon Steel & Sumitomo Metal Corporation, Japan
9.10 Flow dynamics analysis of continuous casting processes through open source numerical ICS 209 modelling P.N. Jalali, R.S. Nick - Swerea MEFOS AB, Luleå and KTH University, Stockholm, Sweden P. Jönsson - KTH University, Stockholm, Sweden H. Nilsson - Chalmers University of Technology, Gothenburg, Sweden
9.30 In-situ and numerical study of inclusion distribution in a vertical-bending slab ICS 178 X. Li, B. Li, Z. Liu, R. Niu - Northeastern University, China X. Ruan, G. Xu - Baoshan Iron & Steel Co., Ltd., China
9.50 Research on continuous casting grades transition process by hydraulic model of CSP 45 t single ICS 254 strand tundish J-j. Zhang, Z-g. Peng - Wuhan iron and steel Limited company, China
10.10 Entrapment mechanism of inclusions at solidifying shell front in continuous casting mold ICS 183 H. Pan, L. Zhang, X. Deng, C. Ji, Z. Zhi - Shougang Research Institute of Technology, China
10.30 coffee break
CONTINUOUS CASTING – FLUID FLOW & SOLIDIFICATION V CHAIRPERSONS:
11.00 Numerical simulation of fluid flow and solidification in bloom continuous casting mold with EMS ICS 107 W. Zhang, S. Luo, Y. Chen, D. Jiang, W. Wang, M. Zhu - Northeastern University, Shenyang, China Y. Chen - Pangang Group Research Institute Co. Ltd, Sichuan, China
11.20 ZrO2 metering nozzle clogging phenomenon during billet casting of high Ti steel ICS 260 H. Yin - ArcelorMittal Global R&D East Chicago, USA
11.40 Influence of Al/Ti ratio on nozzle clogging for continuous casting of Ti-bearing Al-killed ultra low ICS 251 carbon steel J-H. Lee, Y-B. Kang - Pohang University of Science and Technology, Korea S-K. Kim, M-H. Kang - POSCO, Gwangyang, Korea
12.00 Influence of selected alloy additions on time mixing for pulse-step method of liquid steel alloying ICS 206 in the tundish A. Cwudziński, J. Jowsa - Czestochowa University of Technology, Poland
12.20 Influence of thermal history on the hot ductility of Ti-Nb microalloyed steels ICS 148 C. Hoflehner, C. Ramskogler, C. Sommitsch - Graz University of Technology, Austria S. Ilie, J. Six - voestalpine Stahl Linz GmbH, Austria
12.40 lunch
20
W
Thursday, 14 June 2018 - room 1
MON-METALLIC INCLUSIONS II
8.45 Keynote: Inclusion thermodynamics for high-Mn high-Al advanced high strength steels ICS 167 J-J. Pak, J-M. Jang - Hanyang University, Ansan, Korea M-K. Paek - Seoul National University, Korea Y-B. Kang - Pohang University of Science and Technology, Korea
9.10 Characteristics of the 3-dimensional morphology inclusions in Ti-bearing ultra low-carbon ICS 085 steel and in a clogged nozzle Y. Luo, B. Liu, C. Ji, Y. Cui, Z. Tian - Research Institute of Technology Shougang Group Co., Ltd, Beijing, China X. Yang, Z. An - Shougang Jingtang United Iron and Steel Co., Ltd., Hebei, China
9.30 Formation of equiaxed structure by controlling non-metallic inclusions during refining ICS 274 and casting processes J.H. Park, J.J. Pak - Hanyang University, Ansan, Korea
9.50 Controlling inclusion evolution behaviour during additive manufacturing of 316L stainless steel ICS 202 J-W. Cho, D. Eo - Pohang University of Science and Technology (POSTECH), Korea
10.10 Thermodynamic study of inclusions precipitation during solidification of zirconium containing resulfuried steel ICS 169 Y. Deng, X. Wang, Q. Wang, Q. Wang - Chongqing University, China Y. Guo - Tangshan Iron & Steel Group Co., Ltd., Tangshan, China
10.30 coffee break CONTINUOUS CASTING – SLAB QUALITY CONTROL I
CHAIRPERSONS:
10.55 Keynote: Consideration of phase equilibria in Fe-Al-Ti-O system and its importance in steel ICS 250 cleanliness during casting process Y-B. Kang, J-H. Lee - Pohang University of Science and Technology, Korea
11.20 Dynamic soft reduction for round blooms: new concept and experience ICS 247 M. Fornasier, P. Armenante, A. Sgrò, D. Comand - Danieli & C. spa, Buttrio, Italy L. Pittana - ABS Acciaierie Bertoli Safau spa, Pozzuolo del Friuli, Italy L. Cestari - Danieli Automation spa, Buttrio, Italy
11.40 Estimation of the range of equiaxed crystal generation near continuous cast bottom ICS 129 M. Kakizaki, T. Miyake, S. Kimura, K. Semura - Kobe Steel Ltd., Japan
12.00 A novel methodology to evaluate surface cracking risk during strand straightening in continuous ICS 175 casting G. Poltarak, S. Ferro, C. Cicutti - Tenaris, Argentina
12.40 lunch
W
21
Thursday, 14 June 2018 - room b
SECONDARY REFINING I CHAIRPERSONS:
8.45 Keynote: Review on interaction between slag, steel and inclusions in secondary steelmaking ICS 216 L. Holappa, S. Nurmi, A. Jokilaakso - Aalto University, Finland
9.10 Dependence of C concentration on C deoxidation ICS 066 A. Kushimoto, A. Okayama, T. Yamazaki - Nippon Steel & Sumitomo Metal Corporation, Japan
9.30 Physical modelling of gas injection in a ladle ICS 055 T. Palovaara - SSAB Europe Oy, Raahe, Finland V-V. Visuri, T. Fabritius - University of Oulu, Finland
9.50 Nitrogen adjustment in molten steel using RH vacuum degasser ICS 141 S. Tanaka, H. Onoda, S. Kimura, K. Semura - Kobe Steel Ltd, Japan
10.10 Characterization of microstructure and carbides in an electroslag remelted austenitic ICS 093 hot work die steel C. Shi, Y. Qi, J. Li, M. Wang, Z. Guo - University of Science and Technology Beijing, China
10.30 coffee break
SECONDARY REFINING II
CHAIRPERSONS:
11.00 Deep deoxidization from liquid iron by hydrogen plasma arc melting ICS 198 X. Guo, J. Yu, Y. Zhang, L. Liu, Z. Zhang, Z. Ren - Shanghai University, China
11.20 Electroslag remelting for low oxygen metal manufacturing ICS 199 G. Stovpchenko, L. Lisova, L. Medovar, G. Polishko - E.O. Paton Electric Welding Institute, Kyiv, Ukraine N. Brun - International institute of Welding, Yutz, France P. Bourson - LMOPS – Centrale SUPELEC, Metz, France
11.40 Optimum slagging system and composition of CaO-SiO2-Al2O3- MgO slag for 82B wire rod steel ICS 095 Y. Dai, F. Wang, J. Li - University of Science and Technology Beijing, China
12.40 lunch
22
W
Thursday, 14 June 2018 - room 44 JUNE 2018 ROOM 4
PROCESS FUNDAMENTALS IV CHAIRPERSONS:
8.45 Keynote: Mixing intensity in a model Creusot-Loire Uddeholm (CLU) converter and the effects of ICS 071 a simulated slag phase A. Chaendera, R.H. Eric - University of the Witwatersrand, Johannesburg, South Africa
9.10 Experimental and numerical study of the effect of mechanical vibration on C45 steel ICS 050 ingot solidification S. Niu, D. Senk, J. Rezende - RWTH Aachen University, Germany
9.30 Non-Newtonian behavior of solid-bearing BOF slag ICS 089 Z. Liu, A. Malfliet, B. Blanpain, M. Guo - University of Leuven, Belgium
9.50 Mass transfer rates and patterns in a one-fifth scale Creusot-Loire Uddeholm converter model ICS 072 A. Chaendera, R.H. Eric - University of the Witwatersrand, Johannesburg, South Africa
10.10 Effect of particle velocity on penetration and flotation behavior in refining process
ICS 096 A. Matsuzawa, K. Sasai, H. Harada, M. Numata - Nippon Steel & Sumitomo Metal Corporation, Japan
10.30 coffee break
PROCESS FUNDAMENTALS V
CHAIRPERSONS: 11.00 The interfacial convection in fluxes in the continuous casting process ICS 235 P.R. Scheller - Beijing University of Science and Technology, China and Technical University Bergakademie Freiberg, Germany Y. Lin, Q. Shu - Beijing University of Science and Technology, China
11.20 Mathematical modeling and optimization of steelmaking technologies ICS 132 K.V. Grigorovich, O.A. Komolova - The Russian Academy of Science, Moscow, Russia
11.40 Wetting behavior of slag with metallurgical cokes ICS 117 S. Ueda, X. Gao, S. Ogyu, S-y. Kitamura - Tohoku University, Japan
12.00 Solubility of sulfur in the solid oxides of CaO-Al2O3 system ICS 116 X. Gao, Y. Baba, M. Nishimoto, S. Ueda, S-y. Kitamura - Tohoku University, Japan
12.20 Density and surface tension of BOF slag bearing chromium ICS 165 B. Huang, M. Zhu, Y. Zhong, T. Lin - Chongqing University, China
12.40 lunch
23
Thursday, 14 June 2018 - room e
xxvi convegno nazionale trattamenti termici
HT & SE I - COATINGS & SURFACE ENGINEERING CHAIRPERSONS:
8.45 Keynote: Future trends in gaseous surface hardening of titanium and titanium alloys ICS 240 T.L. Christiansen, M.S. Jellesen, M.A.J. Somers - Technical University of Denmark, Denmark
9.10 Jet flow characteristics of 3-slot nozzle in gas wiping process ICS 042 G. Takeda, H. Takahashi, K. Kabeya - JFE Steel Corporation, Japan
9.30 The structure evolution mechanism of Ni coating electrodeposited on steel substrate ICS 073 depended on wettability X. Yu, Z. Yuan, M. Wang, Z. Guo - University of Science and Technology Beijing, China
9.50 The effect of inclusions on corrosion resistance of phosphate film ICS 259 J. Zhang, J. Xu, J. Yang, X. Zhang, J. Cao - Shougang Research Institute of Technology, Beijing, China X. Li - Beijing Electric Vehicle Co., LTD, Beijing, China
10.30 coffee break
eit raw materials workshop
12.40 lunch
24 24
AY 14 JUNE 2018 ROOM 3
Thursday, 14 June 2018 - room 3
CONTINUOUS CASTING – SLAB QUALITY CONTROL II CHAIRPERSONS:
13.50 Keynote: Development and use of indicators in the algorithms to detect defects automatically on ICS 038 the slabs by utilising images taken from the hot slabs on line during continuous casting P. Hooli, H. Suopajärvi - Sapotech Oy, Oulu, Finland
14.15 Mechanisms advanced high-strength steel slab embrittlement ICS 223 R.C. Giacomin, B.A. Webler - Carnegie Mellon University, USA
14.35 Flexible slab caster technology: Where operational agility meets prime slab quality production ICS 248 M. Knights, A. Carboni, W. Tami - Danieli & C. Officine Meccaniche spa, Buttrio, Italy G. Brunetti - Danieli Automation spa, Buttrio, Italy
14.55 Comparison of macrosegregation in a continuous casting slab with different dendritic solidification ICS 160 model R. Niu, B. Li, Z. Liu, X. Li - Northeastern University, China
15.15 Study on high temperature mechanical properties of high quality and high alloy for ICS 044 continuous casting slab R. Chu - Shougang Research Institute of Technology, Beijing, China and KU Leuven, Belgium Z. Li, J. Liu, N. Hao - Shougang Research Institute of Technology, Beijing, China Y. Fan - TU Bergakademie Freiberg, Germany
15.35 Study and control of nitrogen pickup in asymmetric dual strand tundish operation for ICS 024 improvement of steel cleanliness during slab casting P. Palai, P. Patnaik, K.C. Malla, R.V. Sangwai, C. Bhanu, V.V. Mahashabde - Tata Steel Ltd, India
15.55 coffee break
25
Thursday, 14 June 2018 - room 3
NON-METALLIC INCLUSIONS III CHAIRPERSONS:
16.20 Formation of spinel inclusions in Al-killed manganese steel ICS 046 Z. Deng, L. Kong, M. Zhu - Northeastern University, Shenyang, China
16.40 Technology to control inclusions in stainless steels ICS 012 S. Lee, E. Jeong, S-Y. Kim - POSCO Technical Research Laboratories, Republic of Korea J-W. Ki, K. Kim, J. Choi - POSCO, Republic of Korea
17.00 Formation of multiphase inclusions in resulphurised steel ICS 236 L. Krajnc - Pro Labor d.o.o., Zalec and Institute for Materials and Technology, Ljubljana, Slovenia J. Burja - Institute for Materials and Technology, Ljubljana, Slovenia J. Medved - University of Ljubljana, Slovenia
17.20 Evolution of TiN inclusions in solid steel during heating from 1273 to 1673 K ICS 266 K. Sugita, H. Matsuura - The University of Tokyo, Japan
17.40 A review on the effects of non-metallic inclusions on the properties of stainless steels ICS 277 Y. Kang - Dong-A University, Korea J. Park - Hanyang University, Korea
18.00 Effect of K2O on inclusions removal in C96V saw wire steels using LF refining slags ICS 084 Z. Jiang, C. Chen, Y. Li, M. Sun, G. Qin - Northeastern University, Shenyang, China
18.20 An integrated study on the evolution of inclusions in EH36 shipbuilding steel: from casting to ICS 282 welding X. Zou, C. Wang - Northeastern University, Shenyang, China
18.50 Departure from NH Laguna Palace - Boat tour in the Venitian lagoon 20.20 Congress dinner at Palazzo Dandolo - San Marco 1332, Venice 23.00≈ Return trip to NH Laguna Palace
26
Thursday, 14 June 2018 - room 1
CONTINUOUS CASTING – MOLD FLUXES I CHAIRPERSONS:
13.50 Keynote: Analysis of viscosity of fluorine-free mould fluxes ICS 056 X. Yuan - University of New South Wales, Sydney, Australia and Chongqing University of Science and Technology, China L. Wang - University of New South Wales, Sydney, Australia and Hohai University, Nanjing, China J. Zhang, Y. Sasaki, O. Ostrovski - University of New South Wales, Sydney, Australia C. Zhang, D. Cai - Baosteel Group Corporation Research Institute, Shanghai, China
14.15 Application of a modified Double Hot Thermocouple Technique for mold slags ICS 094 N. Kölbl, I. Marschall, V. Kircher, H. Harmuth - Montanuniversitaet Leoben, Austria
14.35 Boron effects on commercial mold fluxes properties ICS 097 M. Alloni, S. Casagrande, R. Carli - Prosimet spa, Italy
14.55 Comprehensive study of meniscus freezing phenomena in continuous casting ICS 151 F. Crimmann, D. Senk, S. Münch, J.L.L. Rezende - RWTH Aachen, Germany H. Lachmund - AG der Dillinger Hüttenwerke, Germany
15.15 The effect of high viscosity mold powder on the slab quality of ultra low carbon steel in a ICS 028 continuous casting S.Y. Jin, H.Y Lee, H.S Kim, S.H Jung - POSCO, Republic of Korea
15.35 Colour change of mould flux for continuous steel casting reduced by silicon in terms ICS 133 of distribution of iron particles R. Endo, Y. Kan, T. Watanabe, M. Hayashi, M. Susa - Tokyo Institute of Technology, Japan
15.55 coffee break
27
Thursday, 14 June 2018 - room 1
CONTINUOUS CASTING – MOLD FLUXES II CHAIRPERSONS:
16.20 Simulation and experimental study of the chemical composition transformation and decarburization in mould powder layers in continuous casting ICS 150 S. Münch, D. Senk, F. Crimmann, J.L.L. Rezende - RWTH Aachen, Germany H. Lachmund - AG der Dillinger Hüttenwerke, Germany
16.40 Measuring the molten layer thickness of mold flux by electrode method ICS 149 N. Yin, H. Li, P. Gao, Y. Cui - Shougang Research Institute of Technology, China C. Jing - China Shougang International Trade & Engineering Corporation, China J. Zhang - University of Science and Technology Beijing, China
17.00 Optimal fluxes and hot top insulations for ingot casting of special steels ICS 265 T. Dubberstein, M. Richter, A. Kovalev - Schmiedewerke Gröditz GmbH, Germany I. Korobeinikov - TU Bergakademie Freiberg, Germany
18.50 Departure from NH Laguna Palace - Boat tour in the Venitian lagoon 20.20 Congress dinner at Palazzo Dandolo - San Marco 1332, Venice 23.00≈ Return trip to NH Laguna Palace
28
Thursday, 14 June 2018 - room b
SECONDARY REFINING III CHAIRPERSONS:
13.55 Investigation on sulfur transfer reaction under electric field between molten iron and ICS 252 molten slag D-H. Kim, Y-B. Kang - Pohang University of Science and Technology, Korea W. Kim - POSCO, Pohang, Korea
14.15 Mathematical models, algorithms and software for dynamic simulation of ladle treatment ICS 166 technology O.A. Komolova, K.V. Grigorovich - Baikov Institute of Metallurgy and Material Science Ras, Moscow, Russia
14.35 Applications of computational thermodynamics to optimize the ladle refining slag in ICS 213 view of desulfurization efficiency and cleanliness of molten steel J.G. Kang, T.S. Kim, and J.H. Park - Hanyang University, Korea
14.55 Effect of FeO in slag on cleanliness of IF steel ICS 090 H. Li, W. Ma - Shougang Research Institute of Technology, Beijing, China
15.15 Application of calcium hexaluminate to ladle lining ICS 190 Y. Jiang, S. Lyu, H-G. Lee, B. Zhao - The University of Queensland, Australia Z. Huang, Z. Yao - Baoshan Iron and Steel Co. Ltd., China J. Chen - Beijing University of Science and Technology, China
15.35 Study on heat transfer mechanism of pure calcium cored wire in molten steel by feeding rate ICS 193 J. Liu, W. Wang, Z. Li, R. Chu, N. Hao - ShouGang Research Institute of Technology, Beijing, China S. Sun - Ningbo Shougang auto parts co., Ltd, Ningbo, China
15.55 coffee break
29
Thursday, 14 June 2018 - room b
SUSTAINABILITY & ENVIRONMENT, RECYCLING & USE OF BY-PRODUCTS I CHAIRPERSONS:
16.20 Development of iron recovery technique from steelmaking slag by technology of mechanical ICS 237 separation T. Shiwaku, M. Sasaki, Y. Nishina, J. Tateno - JFE Steel Corporation, Japan
16.40 Resource and energy saving in the process of slag hot recycling ICS 114 W. Dong, C. Ji, H. Pan, Z. Tian, Y. Cui - Research Institute of Technology Shougang Group Co., Ltd, Beijing, China L. Luo, B. Zhang - Shougang Jingtang United Iron and Steel Co. Ltd., Hebei, China
17.00 Development of environment-friendly recycling system of hot slag and molten steel at Shougang ICS 080 Jingtang Y-q. Liu, L. Luo, P. Zhang, C-l. Zhao, Y-x. Yuan, B-l. Zhang - Shougang Jingtang Iron and Steel Co., Ltd., Heibei, China
17.20 Regeneration of the spent MgO-CaO bricks towards substituting the hazardous MgO-Cr2O3 bricks ICS 271 M. Zhang, M. Guo - University of Science and Technology Beijing, China G. Qiu, B. Peng - Central Research Institute of Building and Construction Co., Ltd, MCC Group, Beijing, China
17.40 Development of high addition mineral manufacturing technology using steel slag ICS 121 E.J. Jung - RIST, Pohang, Korea
18.00 Selective concentration of valuable metal cations through controlled cooling of stainless steel EAF ICS 219 dust and slag composite melts G. Kim, I. Sohn - Yonsei University, Seoul, Korea
18.20 An innovative study on the reuse of steel furnace dust for EMI shielding materials ICS 039 Y. Fan - TU Bergakademie Freiberg, Germany and KU Leuven, Belgium B. Blanpain, M. Guo, V. Volskiy, G. Vandenbosch - KU Leuven, Belgium
18.50 Departure from NH Laguna Palace - Boat tour in the Venitian lagoon 20.20 Congress dinner at Palazzo Dandolo - San Marco 1332, Venice 23.00≈ Return trip to NH Laguna Palace
30
Thursday, 14 June 2018 - room 4
PROCESS FUNDAMENTALS VI CHAIRPERSONS:
13.50 Keynote: Influence of physicochemical properties of ladle slag on desulfurization reaction ICS 244 kinetics: Criteria for transition of rate controlling step J.H. Park, J.G. Kang, T.S. Kim - Hanyang University, Ansan, Korea Y. Chung - Korea Polytechnic University, Siheung, Korea
14.15 Interaction coefficients of alloying elements on copper and tin in iron ICS 243 H. Ono - University of Toyama, Japan H. Konishi - Osaka University, Japan T. Maeda - Chubu Electric Power Co., Inc.
14.35 Viscosity measurements of CaO-SiO2- Al2O3-Cr2O3/CrO slag system ICS 022 Y. Zhang, T. Wu, F. Yuan - University of Science and Technology Beijing, China
PRODUCTS & TECHNOLOGY I
CHAIRPERSONS:
14.55 Statistical learning to predict athermal and deformation-induced martensitic transformations in ICS 222 steels W. Mu, J. Odqvist, P. Hedström - HiMat Engineering AB, Nacka and KTH Royal Institute of Technology, Stockholm, Sweden M. Rahaman - HiMat Engineering AB, Nacka, Sweden
15.15 High temperature solution nitriding of martensitic stainless steels ICS 242 M. Villa, K.V. Dahl, M.A.J. Somers, T.L. Christiansen - Technical University of Denmark, Denmark
15.35 Influence of V on the hot ductility of high Al, TWIP steels ICS 144 S.E. Kang, M.H. Kang - POSCO, South Korea B. Mintz - University of London, United Kingdom
15.55 coffee break
31
Thursday, 14 June 2018 - room 4
PRODUCTS & TECHNOLOGY II CHAIRPERSONS:
16.20 Control technology of slab internal quality of high grade pipeline steel ICS 204 G. Liu - University of Science and Technology Beijing, and Shougang Group Co., Ltd., Beijing, China Q. Liu - University of Science and Technology Beijing, China W. Ma, B. Chen, H. Li, C. Ji, K. Liu - Shougang Group Co., Ltd., Beijing, China
C. Zhang, W. Ma - Shougang Qian’an Iron&Steel Co., Ltd, Hebei, China 16.40 Cost saving solutions taking care of the environment ICS 293 G. Zanella, M. Parnisari - SMS Group, Italy
17.00 Hot ductility behavior of an high alloy steel ICS 145 J.H. Min, S.H. Kwon, S.D. Lee, J.S. Lee, Y-U. Heo, C.H. Yim - Postech GIFT, Korea S.W. Moon - Posco, Korea D.K. Kim - Dong-A University, Korea
17.20 Implementation of state of the art technologies, a “new life” for existing continuous ICS 040 casting plants U. Zanelli - Sarralle Equipos Siderurgicos S.L., Udine, Italy
17.40 Cause analysis of disqualification for flaw detection of 610 grade hydropower steel ICS 208 F. Yu, M. Xu, X. Liao, D. Li, F. Liang- State Key Laboratory of Metal Material for Marine Equipment and Application, Anshan China
Y. Li,Y. Sui - Ansteel Co. Ltd., Anshan China
18.00 Blistering formation in three steels with different carbon and alloy additions ICS 057 V.V. Basabe - Tata Steel, United Kingdom
18.20 Effect of Delta ferrite on failure of 316 SS flanged Ball valve ICS 278 H. Bayati, M. Al-Elyani, W.M. Al-Othman, Y. Al-Ghadeer - SABIC, Saudi Arabia
18.50 Departure from NH Laguna Palace - Boat tour in the Venitian lagoon 20.20 Congress dinner at Palazzo Dandolo - San Marco 1332, Venice 23.00≈ Return trip to NH Laguna Palace
32
Thursday, 14 June 2018 - room e
xxvi convegno nazionale trattamenti termici
HT & SE II – APPLICATIONS CHAIRPERSONS:
13.50 Keynote: Tribology test methods and simulations of the effect of friction on the formability of ICS 061 automotive steel sheets S. Jadhav, M. Schoiswohl, B. Buchmayr - Montanuniversitaet Leoben, Austria
14.15 New challenges to the weight reduction of automotive parts with boron- added high carbon steels: ICS 004 super-high strengthening and ERW tubing H. Seong, Y. Cho - POSCO Technical Research Laboratories, Jeollanam-do, Republic of Korea
14.35 Formation mechanism of copper sulfides in solid iron ICS 182 Y. Kobayashi, K. Urata - Tokyo Institute of Technology, Japan
14.55 Precipitation behavior of Cu2S in carbon steels under continuous cooling and isothermal holding ICS 195 conditions S-Y. Lee, Y-U. Heo, J-W.Cho - POSTECH, Korea
15.55 coffee break
33
Thursday, 14 June 2018 - room e
xxvi convegno nazionale trattamenti termici
HT & SE III - MASSIVE HEAT TREATMENTS CHAIRRPERSONS:
16.20 Effect of low-temperature annealing on the mechanical properties of manganese steel ICS 126 D.A. Nurcahyaningsih - Yeungnam University, South Korea
16.40 Dissolution behavior of carbide and metallurgical and mechanical properties of AISI 52100 steel ICS 123 when austenitized above 900°C H. Yuki, M. Sato, C. Ohki - NTN corporation, Japan
17.00 Cryogenic treatment of steel parts for aircraft engines ICS 232 L. Bustamante Valencia, A-M. Pubill-Melsió, P. Bruchet, L. Coudurier - Air Liquide France Industrie, Bagneux, France
17.20 Correlation of tensile strength and hardness, and effects of heat treatment and alloying of ICS 191 spring steels X. Ma, J. Marl, H-G. Lee, B. Zhao - The University of Queensland, Australia Z. Huang, Z. Yao - Baoshan Iron and Steel Co. Ltd., China
17.40 Effect of annealing treatment on torsion property of heavily cold drawn pearlitic steel wire ICS 009 M. Wang - Shougang Research Institute of Technology, Beijing, China
18.50 Departure from NH Laguna Palace - Boat tour in the Venitian lagoon 20.20 Congress dinner at Palazzo Dandolo - San Marco 1332, Venice 23.00≈ Return trip to NH Laguna Palace
34
Friday, 15 June 2018 - room 3
NON-METALLIC INCLUSIONS IV CHAIRPERSONS:
8.45 Keynote: Critical analysis of non-metallic inclusions in Al- and Si-deoxidized spring steels ICS 192 S. Lyu, X. Ma, G. Wang, J. Zou, H.-G. Lee, B. Zhao - The University of Queensland, Australia Z. Huang, Z. Yao - Baoshan Iron and Steel Co. Ltd., China Z. Jiang - Northeastern University, China
9.10 Control of large-sized inclusions and macro segregation in steels for high speed train ICS 053 wheels and axles X. Wang - Shougang Group Co., Beijing, China M. Jiang - University of Science and Technology Beijing, China K. Wang, W. Sun - Ma Steel Co. Ltd., Maanshan, China
9.30 Inclusion control technology to improve the toughness of heat affected zone of steel ICS 125 plate after high heat input welding J. Yang, L. Xu, R. Wang, Y. Zhang - Shanghai University, China
9.50 Prediction of alumina inclusions movement derived by interfacial tension gradient in solidification ICS 188 J. Lee, J.S. Jung, S.C. Shim - Korea University, Korea H. Na - POSCO Technical Research Laboratories, Korea G. Bae - POSCO Global R&D Center, Korea S-J. Seo - POSCO, Korea
10.10 Behavior of oxide inclusions in carburized bearing steel during industrial electroslag ICS 058 remelting process S. Li, G. Cheng, Z. Miao - University of Science and Technology Beijing, China L. Chen, Z. Liu, C. Li - Xining Special Steel Group Co. Ltd, Xining, China
10.30 Effect of inclusions behaviors on the formation of Al2O3 and Spinel inclusions in ladle treatment ICS 109 by simulation model J-I. Kim, S-J. Kim - Chosun University, Korea S-y. Kitamura - Tohoku University, Japan
10.50 coffee break
35
Friday, 15 June 2018 - room 3
PRODUCTS & TECHNOLOGY IV
CHAIRPERSONS: 11.20 The NoWASTE strategy of Georgsmarienhütte - A suitable way to ensure sustainable electric ICS 047 steel making in Germany? D. Algermissen - FehS-Building Materials Institute, Duisburg, Germany M. Cancarevic, T. Rekersdrees, H. Schliephake, T. Zehn - Georgsmarienhütte GmbH, Germany
11.40 Influence of taper settings on the narrow face shape and gutter formation in continuous slab ICS 098 casting D. Lieftucht, A. Krasilnikov, F. Fanghänel, M. Klein, W. Klos - SMS group GmbH, Duesseldorf, Germany
12.00 Numerical simulation of magnetohydrodynamic two-phase flow and heat transfer in ICS 173 electroslag refining of electrolytic manganese metal Q. Wang, Y. Yang - Wuhan University of Science and Technology, China and Delft University of Technology, The Netherlands G. Li - Wuhan University of Science and Technology, China Z. Chen - Delft University of Technology, The Netherlands
12.20 Hot rolling optimization of 51CrV4 grade steel through physical simulation ICS 013 N. Deepan - SW Steel Ltd, India K. Narasimhan, M.J.N.V. Prasad - Indian Institute of Technology Bombay, India
12.40 Effect of the heat input of phase balance in Duplex UNS S32205 joined by GTAW ICS 296 A.M. Videira - Instituto Federal de Educação, Ciência e Tecnologia de Mato Grosso, Brasil V.A. Ventrella - Universidade Estadual Paulista, Brasil I. Calliari, C. Gennari - Università di Padova, Italy
13.20 Closing remarks
36
Friday, 15 June 2018 - room 1
CONTINUOUS CASTING - MOLD FLUXES III CHAIRPERSONS:
8.45 Keynote: Flux-steel reaction of CaO-SiO2 and CaO-Al2O3-based mold fluxes with high-Al steel ICS 122 J. Yang, J. Zhang, O. Ostrovski - University of New South Wales, Australia C. Zhang, D. Cai - Baosteel Group Corporation Research Institute, China
9.10 Relationship between the thermal conductivity and the structure of the CaO-BO1.5- SiO2-AlO1.5 ICS 171 mold flux system S. Shirayama, H. Aoki, K. Morita - The University of Tokyo, Japan Y. Kim - Korea Institute of Geoscience and Mineral Resources (KIGAM)
9.30 Numerical analysis of the thickness and the state of the mold flux film during continuous casting ICS 253 Y-t. Kim, K-w. Yi - Seoul National University, Korea
9.50 Investigation of high-temperature properties of the mold flux for casting Cr-contained steel ICS 146 W. Wang, J. Yu, L. Zhou - Central South University, China
10.10 Investigation on crystallization of CaO -Al2O3-B2O3-Li2O-Na2O melts and glasses ICS 238 Q. Shu, Q. Li - University of Science and Technology Beijing, China J.L. Klug - Federal University of Ceara, Fortaleza, Brazil
10.50 coffee break
ELECTRO SLAG REMELTING CHAIRPERSONS:
11.20 Effect of electroslag remelting on elements segregation and carbides distribution in GCr15 ICS 111 bearing steel Y. Liu, J. Li, C. Shi - University of Science and Technology Beijing, China
11.40 Prediction of solidified shell thickness in the mold on continuous casting BB2 beam blank through ICS 115 thermo-mechanical coupled model K. Liu, Q. Sun, T. Chen, Q. Di - Research Institute of Shougang Group Co., LTD, China J. Zhou - Shougang Changzhi Iron & Steel Co., LTD, China
12.00 Numerical investigation of macrosegregation and inclusion behavior in electroslag remelting ICS 102 process X. Huang, B. Li - Northeastern University, Shenyang, China F. Tsukihashi - The University of Tokyo, Japan
13.20 Closing remarks in room 3
37
Friday, 15 June 2018 - room b
SUSTAINABILITY & ENVIRONMENT, RECYCLING & USE OF BY-PRODUCTS II CHAIRPERSONS:
8.45 Keynote: Heat recovery potential from incident radiation using a thermophotovoltaic system ICS 203 during continuous casting: A conceptual study A. Fathi, Y. Saboohi - Sharif University of Technology, Tehran, Iran I. Skrjanc, V. Logar - University of Ljubljana, Slovenia
9.10 Characterisation of self-sintering BOS dust ICS 037 R.J. Longbottom, B.J. Monaghan, G. Zhang - University of Wollongong, Australia D.J. Pinson, S.J. Chew - BlueScope Iron & Steelmaking Technology, Port Kembla, Australia
9.30 Cooling condition for slag cast stone ICS 119 T. Hoshino, H. Tobo, K. Watanabe - JFE Steel Corporation, Japan
9.50 A innovation process to treat CrV, Ti, Fe and Mn elements valued in slag towards applications ICS 272 L. Wang, S. Liu, S. Wu, K. Chou - University of Science and Technology, Beijing, China
10.10 Development of iron recovery technique from steelmaking slag by reduction at high temperature ICS 087 K. Nakase, Y. Nakai, N. Kikuchi, Y. Miki - JFE Steel Corporation, Japan Y. Uchida - Nippon Institute of Technology, Japan
10.30 Multi-objective optimal scheduling model for multi-energy-medium in iron and steel enterprises ICS 135 D. He, P. Liu, X. Lu, K. Feng - University of Science and Technology Beijing, China
10.50 coffee break
38
Friday, 15 June 2018 - room b
HOT METAL PRETREATMENT CHAIRPERSONS:
11.20 Utilization of low-grade aluminum ash for mechanical stirring desulfurization process ICS 081 T. Adachi, D. Watanabe, K. Ouchi, T. Tsushima, M. Morishita - Kobe Steel, Japan
11.40 Slag optimisation considering iron loss and sulphide capacity in hot metal desulphurisation ICS 131 F.N.H. Schrama - Delft University of Technology and Tata Steel, the Netherlands E. Moosavi-Khoonsari, E.M. Beunder, C. Kooij - Tata Steel, the Netherlands R. Boom, J. Sietsma, Y. Yang - Delft University of Technology, the Netherlands
12.00 KR efficiency improvement technology by changing of impeller shape and gas injection ICS 052 MH. Song, JK. Park - POSCO Technical Research Laboratories, Republic of Korea
12.20 Kinetic model for hot metal pretreatment using lime and magnesium ICS 273 E. Moosavi-Khoonsari - Tata Steel, the Netherlands M-A. Van Ende, I-H. Jung - Seoul National University, Seoul, Korea
12.40 Kinetic study on the rate of hot metal dephosphorization by converter ICS 077 L. Luo, Y. Liu, C. Zhao, T. Yuan, B. Zhang - Shougang Jingtang United Iron and Steel Co. Ltd., Hebei, China
13.00 Electrochemical method for enhancing slag-metal reaction in molten CaO-SiO2-Al2O3 system ICS 186 S.H. Lee, D.J. Min - Yonsei University, Korea
13.20 Closing remarks in room 3
39
Friday, 15 June 2018 - room 4
PRODUCTS & TECHNOLOGY III CHAIRPERSONS:
8.45 Keynote: Effect of mold taper structure on micro-alloyed steel slab corner solidification during ICS 239 continuous casting Z. Cai, M. Zhu - Northeastern University, Shenyang, China
9.10 Study of effect of continuous casting cooling intensity on drawing performance of low carbon ICS 136 steel wire rod for welding T. Chen, Q. Tong, K. Liu, Y. Ma, N. Lv, M. Yi - Shougang Group Co. Ltd., China
9.30 Use of FBG optical fibers in CC mould for BO detection and thermal exchange supervision first trial ICS 083 in a broadface on a stainless steel slab caster E. Castiaux - EBDS Engineering, Belgium R. Robert - APERAM Châtelet, Belgium
INDUSTRY 4.0 & AUTOMATION I
CHAIRPERSONS:
9.50 Data-driven prediction models at Acciaierie Bertoli SaFau Meltshop ICS 249 A. Spadaccini - ABS Acciaierie Bertoli Safau spa, Pozzuolo del Friuli (UD), Italy M. Di Pierro - Treviso, Italy P. Nadalutti - Udine, Italy L. Cestari, G. Pellegrini - Danieli Automation spa, Buttrio (UD), Italy
10.10 Activities of plant and processes improvements and strategies “Industry 4.0” to increase the steel ICS 227 quality and produce new special steel grades in Acciaierie di Calvisano L. Angelini, P. Frittella - Feralpi Siderurgica, Lonato del Garda (BS), Italy A. Tolettini, N. Mora, G. Miglietta, C. Aguglia, F. Guerra, A. Zurru - Acciaierie di Calvisano, Italy
10.30 Products of Industry 4.0 application in continuous casting ICS 067 F. Zani, S. Feldhaus, G. Cairoli - SMS Concast AG, Switzerland G. Michelon - SMS group spa, Italy
10.50 coffee break
40
Friday, 15 June 2018 - room 4
INDUSTRY 4.0 & AUTOMATION II CHAIRPERSONS:
11.20 Tackling the challenge of inconsistent raw materials in steel making ICS 075 A. Schlemminger - Secopta analytics GmbH, Germany
11.40 Smart laser based sensors in long products rolling mills for process and productivity optimization ICS 284 U. Knaak - LAP Laser Applikationen GmbH, Lüneburg, Germany
12.00 New ways to enhance refractory monitoring with latest IoT technology ICS 217 J. Roininen, L. Halonen, H. Suopajärvi- Sapotech Oy, Finland O. Mattila - SSAB Oy, Finland
12.20 Contactless mold thermal mapping at meniscus through an innovative ultrasonic sensor ICS 156 I. Mazza, S. Spagnul - Ergolines Lab srl, Italy
12.40 New sensor for Electric Arc Furnaces arc stability control ICS 005 A. Vicente, I. Macaya - Arcelor Mittal Global Research and Development, Basque Center, Spain J.A. Sainz - ArcelorMittal, Sestao, Spain M. Linares, A. Picon, J.A. Arteche - Tecnalia
13.00 Plant Data Management Systems: The engine that ties the smart factory together ICS 174 B. Beard - TMEIC Corp., USA
13.20 Closing remarks in room 3
NOTE ON THE PROGRAMME This programme is a preliminary programme. It is not definitive and it may be slightly modified: title and authors, cancelled or added papers, chairperson, timetable or duration, etc. Possible changes in the programme will be communicated before the beginning of the Congress
41
Friday, 15 June 2018 - room e
xxvi convegno nazionale trattamenti termici
HT & SE IV - PROCESS & PLANTS CHAIRPERSONS:
8.45 Keynote: 4.0 Design of induction hardening and tempering line ICS 245 E. Mansutti, E. Sittaro, A. Cottica, A. Della Gaspera, C. Fabbro - Danieli & C. Officine Meccaniche spa, Buttrio (UD), Italy
9.10 Statistical modeling of heat exchange coefficient evolution during quenching ICS 157 M. Clenet - Vallourec Research Center France and University of Lille 1, France M. Bentivegni, G. Druart - Vallourec Research Center France, France
9.30 Efficient optimization of the load temperature distribution in heat treatment furnaces ICS 134 G. Hartmann, I. Hahn, W. Schäfer - MAGMA Gießereitechnologie GmbH, Germany
9.50 Development and plant verification of the tube quenching unit ICS 291 M. Raudensky, M. Chabicovsky - Brno University of Technology, Czech Republic R. Turon - Trinecke Zelezarny - Moravia Steel a.s., Czech Republic
10.10 High strength fasteners. Requirements, material selection, heat treatments and properties ICS 100 S. Härkönen - Finland
10.30 Surface variability of convective heat transfer coefficient during the quench of a steel cylinder ICS 164 C. Léva - Vallourec Research Center France, France and Thermal Engineering at Reims University, France M. Bentivegni, T. Taisne, T. Bénard - Vallourec Research Center France, France
10.50 coffee break
HT & SE V – STAINLESS STEELS
CHAIRPERSONS: 11.20 Expanded austenite; from fundamental understanding to predicting composition – ICS 187 and stress- depth profiles Ö. C. Kücükyildiz, G. Winther, T.L. Christiansen, M.A.J. Somers - Technical University of Denmark, Denmark
11.40 Stainless steel & titanium surface hardening ICS 155 T. Strabo Hummelshoj - Expanite A/S, Hillerod Denmark
12.00 Microalloying of molybdenum and boron: The effect on slab scale formation of AISI 301 ICS 205 (EN 1.4310) in slab reheat furnace conditions A. Laukka, E-P. Heikkinen, T. Fabritius - University of Oulu, Finland
13.20 Closing remarks in room 3
42
Poster Session
ICS 288 CFD optimization of a six-strand continuous casting tundish - revisited Z. Cancarevic - MBA, Germany
ICS 286 Present situation and research progress of application of RE in steel in Baotou Steel G. Sun, J. Zhi - Baotou Steel (Group) Co. Ltd, Baotou, China H. Ren - University of Science and Technology of the Inner Mongo, China Y. Luan - Chinese Academy of Sciences, China
ICS 011 Development of BOF catch carbon process of Ti-tracing-elements hot metal K. Xiangtao - Shou Gang Group Corporation, Beijing, China
ICS 018 Studying the segregation pattern in hot rolled steel W.M. Al-Othman, H. Bayati, A. Al-Shahrani, H. Al-Jabr - SABIC Technology Center, Jubail, Saudi Arabia
ICS 048 Increase in production of billet and bloom ingots in Khouzestan steel up to 25% M. Sharif-Shazile - Khozestan Steel Company, Iran
ICS 051 Low temperature SCR of NO with NH3 over modified semi-coke supported manganese and cerioum oxides J. Yang, S. Ren, T. Zhang, J. Zhou, B. Kong, Q. Liu - Chongqing University, China
ICS 074 Filtration mechanism of the micro-porous ceramic composite membrane for dusting S. Xie - University of Science and Technology Beijing, China Z. Yuan - University of Science and Technology Beijing and Peking University, Beijing, China J. Liu - Peking University, Beijing, China
ICS 079 Analysis and research on clogging of desulfurization lance in molten iron W. Ma, H. Li, G. Liu, B. Chen, Y. Cui - Shougang Research Institute of Technology, China
ICS 152 Electrochemical separation of rare earth from Nd magnet scraps H. Konishi, Y. Koizumi - Osaka University, Japan H. Ono - University of Toyama, Japan T. Oishi - National Institute of Advanced Industrial Science and Technology, Japan T. Nohira - Kyoto University, Japan
ICS 257 Effects of precipitation in Enamel Steel on surface defects J. Zhang, Y. Zhao Yi - Shougang Research Institute of Technology, Beijing, China L. Li, X. Liu - ArcelorMittal Automotive Steel Co., Ltd
ICS 258 The effect of flame-sweeping on decreasing inclusions of Automotive sheet J. Zhang, J. Xu, J. Yang, X. Zhang, J. Cao - Shougang Research Institute of Technology, Beijing, China X. Li - Beijing Electric Vehicle Co., LTD, China
ICS 268 Observation on nozzle clogging during casting of Si-Mn-killed stainless steels Y. Ren, H. Duan, Y. Luo, J. Zhang, L. Zhang - University of Science and Technology Beijing, China
ICS 059 Optimization of steel industry billets reheating furnaces: an EPC-based APC approach G. Astolfi, L. Barboni, F. Cocchioni, M. Dai Prè, D. Manganotti, L. Orlietti, C. Pepe - Alperia Bartucci spa, Italy S.M. Zanoli - Università Politecnica delle Marche, Ancona, Italy
45 43
ICS 262 Large eddy simulation of the motion of bubbles and fluid flow in continuous casting strands W. Chen, L. Zhang - University of Science and Technology Beijing, China
ICS 086 Study on the viscosity and fibrotic process of the metallurgical waste slag X. Wang, L. Liu - Peking University, Beijing and Beijing Key Laboratory for Solid Waste Utilization and Management, China
ICS 092 Simulation and optimization on central loose defect of casting process in heavy 17CrNiMo6 steel ingots Y. Cui, H. Fan, Q. Yang, W. Tang, S. Liu, J. Zhao - Xi'an University of Architecture and Technology, Xi'an Shaanxi, China Z. Ma - HBIS group Hansteel company, Hebei, China
ICS 023 Development of steel wire rods by mist cooling process C-J. Fang, Y-Y. Lin - China Steel Corporation, Taiwan, China
ICS 200 Electrochemical dephosphorization of Fe-Csatd and Fe-Cr-Csatd alloys by CaOsatd-SiO2-Al2O3 slag D.G. Lee, D.J. Min - Yonsei University, Seoul, Korea
ICS 215 3D simulation of metal droplets behavior in slag pool during ESR process X. Wang - Liaoning Shihua University, Liaoning, China Y. Chen - Pangang Group Research Institute Co. Ltd, Sichuan, China
ICS 276 Inclusion characterization for quality control in steelmaking N. Behera - HADEED Research and Technology Center, Jubail, Saudi Arabia
ICS 158 Abnormal arc in AC UHP furnaces M. Momenzadeh, E. Rooholahi, M. Sadeghi - Mobarakeh steel company, Iran
ICS 177 Characterization of fine coal by fluidized bed carbonization S. Seo, J. Park, WJ. Lee - POSCO, Korea
ICS 029 Effect of surface mechanical treatments (TMS) on tensile properties of steel S355 JR M. Bourebia, A. Bouri, S. Achouri - Industrial Technologies Research Center–CRTI, Annaba, Algeria L. Lakhder, H. Hamadache - Badji Mokhtar University, Annaba, Algeria
ICS 181 A study on mechanical properties of tool steels with high wear resistance deposited by using laser melting deposition process G.Y. Baek, G.Y. Shin, K.Y. Lee, D.S. Shim - Korea Institute of Industrial Technology, South Korea
ICS 002 Mechanical properties of cryogenics steels for welded pressure vessels at specified low temperature S. Pourmostadam - Mobarakeh Steel Company, Isfahan, Iran
ICS 295 Investigation of steel grade 20 rheological properties taking into account dynamic recrystallization process and it’s application to FEM modelling of sleeper screw head hot forging A.S. Ishimov, M.P. Barishnikov, N.V. Koptseva - Nosov Magnitogorsk State Technical University, Russia I. Calliari, A. Settimi - Università di Padova, Italy
ICS 078 Prediction of sulfur content in non-metallic inclusions during secondary refining of crankshaft steel J. Ju, J. Wang - Xi’an University of Architecture and Technology, China D. Zheng - University of Science and Technology Beijing, China
44
General Information
CONGRESS VENUE
The Congress will be held in Venice Mestre mainland, at NH VENEZIA CONGRESS CENTER - Laguna Palace (Viale Ancona 2, Mestre, Venice - Italy).
LANGUAGE The official language of the Congress will be English.
PROCEEDINGS The full texts of all papers will be published in the electronic form proceedings and issued to delegates on arrival at the Congress. A selection of the best papers will be also published in “La Metallurgia Italiana - International Journal of the Italian Association for Metallurgy” - the scientific journal of AIM, or in “Ironmaking and Steelmaking: Processes, Products and Applications”, published by Taylor & Francis on behalf of the Institute of Materials, Minerals and Mining (IOM3). Both journals are covered in the Science Citation Index Expanded by Thomson Reuters and in Scopus by Elsevier B.V.
CONGRESS SCHEDULE June 12, 2018: Opening of the registration for attendees June 13, 2018: Opening session and technical sessions June 14, 2018: Technical sessions – Social event June 15, 2018: Technical sessions
ACCOMMODATION An allotment of rooms is available for ICS 2018 participants at the Congress venue: NH Laguna Palace. For information and booking, please contact directly the NH Laguna Palace: https://www.nh-hotels.it/hotel/nh-laguna-palace
45
LIST OF HOTELS HOTELS NEAR THE CONGRESS VENUE: About 12 minutes on foot from the Congress venue HOTEL AMBASCIATORI **** Corso Del Popolo 221 - Mestre, Venezia Ph.: +39 041 5310699 - Fax: +39 041 5310074 https://it.hotelambasciatori-mestre.com/ email: [email protected] HOTEL DELFINO **** Corso del Popolo 211 - Mestre, Venezia Ph.: +39 041 5321029 http://www.hoteldelfino-mestre.com/it AO HOTEL VENEZIA MESTRE Via Ca Marcello 19 - Mestre, Venezia Ph.: +39 041 884 0990 https://www.aohostels.com/it/venezia/venezia-mestre
HOTELS NEAR VENICE - MESTRE TRAIN STATION: About 20 minutes on foot from the Congress venue HOTEL PLAZA VENICE **** Viale Stazione, 36 - Mestre, Venezia Ph.: +39.041.929.388 http://www.hotelplazavenice.com/it email: [email protected] BEST WESTERN PLUS Hotel Bologna **** Via Piave 214 - Mestre, Venezia Ph.: +39.041.931000 - Fax: +39.041.931095 http://www.hotelbologna.com/it email: [email protected] HOTEL TRIESTE *** Via Trento 2 - Mestre, Venezia Ph.: +39.041.929462 - Fax: +39.041.922221 http://www.hoteltrieste.com email: [email protected]
HOTEL TRITONE *** Viale Stazione 16 - Mestre, Venezia Ph.: +39 041 5383125 - Fax +39.041.5383045 http://www.hoteltritonevenice.com/it email: [email protected] HOTEL CORTINA *** Via Piave 153 - Mestre, Venezia Ph.: +39.041.929206 - Fax +39.041.2528344 www.hotelcortinamestre.it email: [email protected]
46
REGISTRATION INFORMATION REGISTRATION FEES EARLY BIRD REGISTRATION FEES (BY APRIL 30, 2018) N.B: Speaker registration deadline: April 16, 2018
MEMBER NON MEMBER Speaker (presenter) Session Chairperson IAB Member
€ 560
€ 680
Participant (non-presenter) € 700 € 820
Student * free € 390
Exhibitor / Sponsor € 600 € 720
STANDARD REGISTRATION FEES (AFTER APRIL 30, 2018)
MEMBER NON MEMBER Session Chairperson IAB Member
€ 560 € 680
Participant (non-presenter) € 750 € 870
Student * free € 430
Exhibitor / Sponsor € 650 € 770
ADDITIONAL TICKET FOR SOCIAL EVENT FOR ACCOMPANYING PERSONS: € 140 (22% VAT included)
(Includes only the social event on June 14)
CONGRESS REGISTRATION FEES INCLUDE: Admittance to technical sessions and to the exhibition
Congress bag with electronic proceedings
Social event on June 14
coffee breaks
lunches For non-members the fee includes AIM Membership for the last three quarters of 2018 and for the year 2019. * Students will have to provide valid proof of student status. The social event on June 14 is not included in the student registration fee.
PAYMENT AND REMITTANCE by bank transfer, to the order of Associazione Italiana di Metallurgia - AIM at “UBI Banca S.p.A.”,
Branch no. 2 - Via Borgogna, 2/4 - 20122 Milano- Italy, account no. 000000022325 - cod. ABI 03111 -
CAB 01604 - cin O, IBAN: IT49O0311101604000000022325, swift code BLOPIT22. The transfer order
must specify the name of the participant and the reference “ICS 2018”. A copy of the transfer order
must be sent to AIM, together with the Registration Form.
by credit card online (www.aimnet.it/ICS2018.htm).
47
SPEAKERS REGISTRATION Please be aware that only papers submitted on time and with presenting author regularly registered (registration fee paid) before April 16, 2018 will be included in the final programme and published in the Congress proceedings. Registration forms will not be processed without payment. A maximum of two papers will be accepted for each author registered in time.
SPEAKERS CANCELLATION AND REFUND POLICY A refund, less 20% deduction for administrative costs, will be issued for written cancellations received by April 16, 2018. For speakers who notify their cancellation after April 30, 2018 or will not attend the Congress, a charge of 100% of the Congress fee will be withheld. Their papers will be published anyway in the proceedings and a copy of the proceedings will be sent after the event.
ADVANCE REGISTRATION If you plan to attend, please register online on the Congress website www.aimnet.it/ics2018.htm or fill in the enclosed Registration Form and send it to the Organising Secretariat best before April 30, 2018 (early-bird registrations deadline). Please use a separate form for each participant. Please contact the Organising Secretariat by fax or e-mail, if possible.
CANCELLATION AND REFUND POLICY A refund, less 20% deduction for administrative costs, will be issued for written cancellations received by April 16, 2018. For attendees who notify their cancellation after April 30, 2018 or will not attend the congress, a charge of 100% of the congress fee will be withheld and a copy of the proceedings will be sent after the event.
INSURANCE The Organising Secretariat cannot assume any responsibility for personal accident, loss or damage to the private property of participants and accompanying persons, which may either occur during or arise from the Congress. Participants should therefore take whatever steps they consider necessary as regards insurance.
VISA APPLICATION FORM If you need and official invitation please send your request to the Organising Secretariat best before May 23, 2018 complete with family and first name, Mr/Mrs, birth date, passport number, arrival and departure dates, nationality and fax number of the Italian Embassy for your Country.
EXHIBITION & SPONSORSHIP OPPORTUNITIES As an integral element of the event, ICS 2018 will feature an Exhibition that will enable excellent exposure for company products, technologies, innovative solutions or services. At this opportunity, the Organizers will set an area strategically located. This area will be a focal point of the Congress, so that enough time will be available to guarantee a perfectly targeted potential customer’s environment. Companies will be able to reinforce their participation and enhance their corporate identification by taking advantage of the benefits offered to them as Sponsor of the Congress. Companies interested in exhibiting and/or sponsoring the event may contact SIDERWEB:
e-mail: [email protected] tel: +39 0302540006 - fax +39 0302540041
48
MOBILE/CELL PHONE Mobiles must be kept turned off or in silent mode in all Congress rooms.
VENICE Mestre is one of the the six boroughs of the city of Venice and it is the mainland gateway to Venice Island. Venice, “La Serenissima”, holds a mystical aura and is one of the most enchanting places in the world. Built on 117 small islands in a lagoon, Venice is a unique blend of water, art and romance with exquisite canals, charming bridges, magnificent palaces and churches, and world famous landmarks rising from the water’s surface up to sky. Whether skimming over a canal on a gondola or strolling around its “calle”, visiting Venice is a magical experience for everyone. It is an artistic and architectural treasure.
SOCIAL PROGRAMME For the evening of June 14, the Conference organizers AIM have planned a boat tour in the Venetian lagoon and a Conference dinner, in order to give delegates the opportunity to meet informally and enjoy Venice’s atmosphere:
18.50 Departure from NH Laguna Palace - Boat tour in the Venitian lagoon 20.20 Congress dinner at Palazzo Dandolo - San Marco 1332, Venice 23.00≈ Return trip to NH Laguna Palace
The dinner will be fish-based. Please inform the Organising Secretariat ([email protected]) by May 26, if you prefer a meat-based or a vegetarian dinner
DRESS CODE: SMART CASUAL IN PARTICULAR FOR MEN: CLOSED-TOE SHOES, DRESS SHIRTS AND LONG TROUSERS
49
T I M E T A B L E
Wednesday, 13 JUNE 2018
TIME ROOM 3 9.00 OPENING SESSION
10.45 Coffee break
TIME ROOM 3 ROOM 1 ROOM B ROOM E ROOM 4 11.45 CONTINUOUS CASTING
FLUID FLOW & SOLIDIFICATION I
OXYGEN STEELMAKING I
EAF STEELMAKING I PROCESS FUNDAMENTALS I
XXVI CONVEGNO NAZIONALE TT
CERIMONIA DI APERTURA (*)
13.10 Lunch 14.15
CONTINUOUS CASTING
FLUID FLOW & SOLIDIFICATION II
OXYGEN STEELMAKING II
EAF STEELMAKING II PROCESS FUNDAMENTALS II
XXVI CONVEGNO NAZIONALE TT
PROCESSI E IMPIANTI (*)
16.20 Coffee break 16.45
CONTINUOUS CASTING FLUID FLOW &
SOLIDIFICATION III
NON-METALLIC INCLUSIONS I
EAF STEELMAKING III PROCESS FUNDAMENTALS III
XXVI CONVEGNO NAZIONALE TT
PROCESSI E IMPIANTI (*)
RIVESTIMENTI E
IMPIANTI (*)
(*) PRESENTATIONS IN ITALIAN LANGUAGE
Thursday, 14 JUNE 2018
TIME ROOM 3 ROOM 1 ROOM B ROOM E ROOM 4 8.45 CONTINUOUS CASTING
FLUID FLOW & SOLIDIFICATION IV
NON-METALLIC INCLUSIONS II
SECONDARY REFINING I XXVI CONVEGNO NAZIONALE TT
HT & SE I – COATINGS & SURFACE
ENGINEERING
PROCESS FUNDAMENTALS IV
10.30 Coffee break 11.00
CONTINUOUS CASTING
FLUID FLOW & SOLIDIFICATION V
CONTINUOUS CASTING SLAB QUALITY
CONTROL I
SECONDARY REFINING II
EIT RAW MATERIALS WORKSHOP
PROCESS FUNDAMENTALS V
12.40 Lunch 13.50
CONTINUOUS CASTING SLAB QUALITY
CONTROL II
CONTINUOUS CASTING MOLD FLUXES I
SECONDARY REFINING III
XXVI CONVEGNO NAZIONALE TT
HT & SE II – APPLICATIONS
PROCESS FUNDAMENTALS VI
PRODUCTS &
TECHNOLOGY I
15.55 Coffee break 16.20
NON-METALLIC INCLUSIONS III
CONTINUOUS CASTING MOLD FLUXES II
SUSTAINABILITY & ENVIRONMENT,
RECYCLING & USE OF BY-PRODUCTS I
XXVI CONVEGNO NAZIONALE TT
HT & SE III – MASSIVE HEAT TREATMENTS
PRODUCTS & TECHNOLOGY II
19.00
Social event
50
Friday, 15 JUNE 2018
TIME ROOM 3 ROOM 1 ROOM B ROOM E ROOM 4 8.45 NON-METALLIC
INCLUSIONS IV CONTINUOUS CASTING
MOLD FLUXES III SUSTAINABILITY &
ENVIRONMENT, RECYCLING & USE OF
BY-PRODUCTS II
XXVI CONVEGNO NAZIONALE TT
HT & SE IV – PROCESS & PLANTS
PRODUCTS & TECHNOLOGY III
INDUSTRY 4.0 & AUTOMATION I
10.50 Coffee break 11.20
PRODUCTS &
TECHNOLOGY IV
ELECTRO SLAG REMELTING
HOT METAL PRETREATMENT
XXVI CONVEGNO NAZIONALE TT
HT & SE V – STAINLESS STEELS
INDUSTRY 4.0 & AUTOMATION II
13.20 CLOSING REMARKS IN ROOM 3
POSTERS WILL BE DISPLAYED FOR THE ENTIRE PERIOD OF THE CONGRESS
51
REGISTRATION FORM Please complete and return this form by April 30, 2018 to: ASSOCIAZIONE ITALIANA DI METALLURGIA – via F. Turati 8 - 20121 Milano · Italy phone: +39 0276021132 - or +39 0276397770 - fax: +39 0276020551 - e-mail: [email protected] - website: www.aimnet.it/ics2018.htm
Registration fees EARLY BIRD REGISTRATION FEES (BY APRIL 30, 2018)
N.B: Speaker registration deadline: April 16, 2018
ALL REGISTRATION FEES ARE
REVENUE STAMP INCLUDED MEMBER NON MEMBER CONGRESS REGISTRATION FEES INCLUDE:
Speaker (presenter) - Admittance to technical sessions and to the exhibition
Session Chairperson € 560 € 680 - Congress bag with electronic proceedings IAB Member - Social event on June 14
Participant (non-presenter) € 700 € 750 (after April 30, 2018)
€ 820 € 870 (after April 30, 2018)
- coffee breaks - lunches
Student * free € 390 € 430 (after April 30, 2018)
* Students will have to provide valid proof of student status. The
social event on June 14 is not included in the student registration fee.
Exhibitor / Sponsor € 600 € 650 (after April 30, 2018)
€ 720 € 770 (after April 30, 2018)
For non-members the fee includes AIM Membership for the last three quarters of 2018 and for the year 2019.
ADDITIONAL TICKET FOR SOCIAL EVENT FOR ACCOMPANYING PERSON: € 140 (22% VAT included) (Includes only the social event on June 14)
To register please fill-in the following registration form in all its parts. (It is also possible to register online - www.aimnet.it/ICS2018.htm)
PERSONAL DATA Please use BLOCK letters throughout form (photocopies can be used)
Family Name____________________________________________________________________________________________________________________________
First Name(s) ____________________________________________________________________________________________________________________________
E-mail for correspondence ________________________________________________________________________________________________________________
Tel. __________________________________________________________________________________________________________________________________
INVOICING DATA
Company Name _________________________________________________________________________________________________________________________
Company Fiscal Address ___________________________________________________________________________________________________________________
ZipCode ______________ Town __________________________________________________________ Country ___________________________________________
e-mail for invoicing and billing information ____________________________________________________________________________________________________
VAT and FISCAL CODE (if different) _______________________________________________ Order ref. number (if requested on the invoice) _____________________
I will attend the Congress as: □ AIM MEMBER □ NON MEMBER □ Exhibitor □ Sponsor €. ________________ □ Speaker (presenter) paper nr. __________ and___________ (Each registration covers a maximum of two papers) €. ________________ □ Session Chairperson □ IAB Member €. ________________ □ Student €. ________________ □ AIM Junior Member Free n. _______ Additional ticket(s) for social event (June 14) for accompanying person €. ________________ TOTAL AMOUNT BEING PAID: €. ________________
PAYMENT AND REMITTANCE
□ by bank transfer, to the order of Associazione Italiana di Metallurgia - AIM at “UBI Banca S.p.A.”, Branch no. 2 - Via Borgogna, 2/4 - 20122 Milano- Italy, account no. 000000022325 - cod. ABI 03111 - CAB 01604 - cin O, IBAN: IT49O0311101604000000022325, swift code BLOPIT22. The transfer order must specify the name of the participant and the reference “ICS 2018”. A copy of the transfer order must be sent to AIM, together with the Registration Form. □ Against invoice
□ by credit card online (www.aimnet.it/ics2018.htm). In accordance to article 13 of the D.lgs n. 196/03 we inform you that: personal data are required, collected and treated following the normal institutional activity of AIM and according to law; in every moment the interested party can exercise the rights foreseen in the in article 7 of the D.lgs n. 196/03; data controller is AIM in Milan – Via Turati 8; data processor is AIM President, prof. Carlo Mapelli. You authorize AIM to the sending:
of newsletters/ communications concerning institutional activities carried out by the Association: ❏ yes ❏ no
also through other metallurgic associations worldwide, of invitations to events of interest: ❏ yes ❏ no
to the input of your name in the list of the participants to the event: ❏ yes ❏ no
Date _______________________________________ Signature ___________________________________________________________________
52