interior kitchen floor - resene...kitchen floor interior to get the look: mark painted the kitchen...

1
Ways with wood with Mark Rayner – 69 In Australia: Call 1800 738 383, visit www.resene.com.au or email [email protected] In New Zealand: Call 0800 RESENE (737 363), visit www.resene.co.nz or email [email protected] Kitchen floor Interior To get the look: Mark painted the kitchen door with Resene Lustacryl tinted to Resene Shiraz. Other ideas: Transform a plywood floor in the same way using Resene Qristal ClearFloor 2K or Resene Aquaclear. Use Resene Colorwood wood stain first to enhance or change the floor colour. Step six Carefully stir the solution thoroughly and then allow the mixed product to stand for 10-15 minutes. Step two Using appropriate floor sanding equipment and wearing recommended protective clothing, carefully sand the floor and edges, sanding in the direction of the grain. Step seven Apply one coat of Resene Qristal ClearFloor 2K to the floor, brushing in the direction of the grain. Allow two hours to dry. Step three Vacuum clean any sanding residue using a soft brush attachment. Step eight Repeat steps five to seven until four complete coats have been applied. Allow seven days for coating to reach full cure. Step four Wipe over the sanded floor with a slightly damp cloth, and allow the floor to dry. Step five Ensuring you mix enough solution to give the floor one full coat, carefully measure ten parts Resene Qristal ClearFloor 2K interior base to one part satin hardener. Step one Punch any protruding nail heads with the hammer and nail punch. Transform an old wooden kitchen floor using hardwearing Resene Qristal ClearFloor 2K. For more ideas and inspiration visit your local Resene ColorShop or www.resene.com/ colorshops. Check out more project ideas online www.resene.com/projects. You will need: Clean damp cloth Floor sanding equipment (consult your local hire centre) • Hammer Nail punch • Paintbrush Resene paint bucket Resene paint stirrer Resene Qristal ClearFloor 2K interior base Resene Qristal ClearFloor 2K satin hardener Vacuum cleaner with soft brush attachment Suitable protective clothing – see Resene Data Sheet D53 and the Resene Putting your safety first brochure for further information

Upload: others

Post on 13-Jul-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Interior Kitchen floor - Resene...Kitchen floor Interior To get the look: Mark painted the kitchen door with Resene Lustacryl tinted to Resene Shiraz. Other ideas: Transform a plywood

Ways with wood with Mark Rayner – 69

In Australia:Call 1800 738 383, visit www.resene.com.au or email [email protected]

In New Zealand:Call 0800 RESENE (737 363), visit www.resene.co.nz

or email [email protected]

Kitchen floorInterior

To get the look:

Mark painted the kitchen door with

Resene Lustacryl tinted to Resene Shiraz.

Other ideas:

Transform a plywoodfloor in the same wayusing Resene Qristal

ClearFloor 2K orResene Aquaclear.

Use Resene Colorwood wood stain first to enhance or change

the floor colour.

Step sixCarefully stir the solution thoroughly and then allow the mixed product to stand for 10-15 minutes.

Step twoUsing appropriate floor sanding equipment and wearing recommended protective clothing, carefully sand the floor and edges, sanding in the direction of the grain.

Step sevenApply one coat of Resene Qristal ClearFloor 2K to the floor, brushing in the direction of the grain. Allow two hours to dry.

Step threeVacuum clean any sanding residue using a soft brush attachment.

Step eightRepeat steps five to seven until four complete coats have been applied. Allow seven days for coating to reach full cure.

Step fourWipe over the sanded floor with a slightly damp cloth, and allow the floor to dry.

Step fiveEnsuring you mix enough solution to give the floor one full coat, carefully measure ten parts Resene Qristal ClearFloor 2K interior base to one part satin hardener.

Step onePunch any protruding nail heads with the hammer and nail punch.

Transform an old wooden kitchen floor

using hardwearing Resene Qristal ClearFloor 2K.

For more ideas and inspiration visit your local

Resene ColorShop or www.resene.com/

colorshops.

Check out more project ideas online

www.resene.com/projects.

You will need:• Clean damp cloth• Floor sanding equipment

(consult your local hirecentre)

• Hammer• Nail punch• Paintbrush• Resene paint bucket

• Resene paint stirrer• Resene Qristal ClearFloor

2K interior base• Resene Qristal ClearFloor

2K satin hardener• Vacuum cleaner with

soft brush attachment

• Suitable protectiveclothing – see ReseneData Sheet D53 andthe Resene Putting yoursafety first brochurefor further information