www.stoneyard.com | 17

Installation]Installation varies dramatically from project to project. Please contact a mason/stone professional or masonry cement manufac-turer for more detailed instructions. Also visit www.stoneyard.com/install for additional information.

Laticrete

800.243.4788

www.laticrete.com

For more information, please visit www.stoneyard.com/install

Quikrete

800.282.5828

www.quikrete.com

Silpro

800.343.1501

www.silpro.com

UMACO

800.442.5535

www.umaco.com

MTI

800.879.3348

www.mtidry.com

� in Veneer Boxes

Flats: 5 sf

Corners: 5 lf

18 boxes per pallet

� in Veneer Crates

Flats: 168 sf14 layers, 12 sf per layerCorners: 150 lf or 75 lf

Corners are available for

all shapes and colors.! in Veneer can be applied

directly to any properly pre-

pared surface. Building Veneer

requires a masonry shelf for

support.

1 inch� in Veneer

3-5 inchBuilding Veneer

Grand Finale]Natural Stone: Rough Trimmed vs. Saw Cut

Natural stone is a unique product with varying shapes and rough edges. If you prefer this natural look, our stone will require minimal trimming and shaping. A waste factor of 10% to 20% should be acceptable.

If you prefer a more consistent look with sawn edges, uniform spacing, and tight joints, the waste factor will increase. For this installation, a 25% to 45% or more waste factor may apply.

Labor costs will increase the more the stone needs to be trimmed. A mock-up is highly recommended to determine joint sizes, color distribution, and the waste factor.Saw CutRough Trimmed

Saw CutRough Trimmed