inspired interior flatuploads.colorhousepaint.com/.../colorhouse...inspired_rev1.10.17w.pdf ·...

5
USE Flat sheen is ideal for ceilings and wall surfaces. It is a wipeable, dura- ble, high-hiding matte finish. Do not use on cabinets, furniture, or floors. PREP Clean off dirt, dust, and other contaminants. Remove loose paint and patch holes with spackle or caulking. Dull glossy surfaces. This product is self-priming for previously painted surfaces in good condition. When applying to new drywall or over surfaces previously painted with oil paint, prime with Colorhouse Multi-Purpose Primer before painting. APPLY Stir well. BRUSH: 2½“ angle brush for the straightest lines. ROLL: We like ½” nap roller for smooth walls and ¾” nap roller for texture. SPRAY: Use a .015 - .017 tip on an airless sprayer and wear appropriate protection. DISPOSAL Don’t pour unused contents down the drain. This is harmful to the environment. Check www.earth911.org for recycling and disposal information. INGREDIENT LIST (White Base) Water, 7732-18-5; Titanium Dioxide, 13463-67-7; Acrylic Resin, Proprietary; Nephaline Syenite, 37244-96-5; Calcined Kaolin, 66402-68-4 PACKAGING Recycled content containers 100% PCW chlorine-free labels 100% PCW brochures PROCESS LEED ® Gold manufacturing facility Member EPA SmartWay transportation Renewable energy at HQ PROVEN LEED ® compliant Green Wise ® certified* South Coast Air Quality Management District – Super Compliant MPI Extreme Green certified PHYSICAL PROPERTIES WEIGHT 11.7lbs per gallon (ASTM D 1475) RESIN TYPE 100% acrylic FINISH 2-3% on a 60° meter, 3-4% on a 85° meter RECOMMENDED DFT Wet: 3.7 mils, Dry: 1.5 mils SOLIDS VOLUME 40% + 2%, SOLIDS WEIGHT 57% + 2% SHELF LIFE 2 years (unopened containers) © 2017 Colorhouse is a trademark of YOLO Colorhouse LLC 519 NE Hancock Street, #B, Portland, Oregon 97212 1.877.493.8276 www.colorhousepaint.com INSPIRED Product Data Sheet COVERAGE Covers 350–400 square feet per gallon. STORAGE Store in a dry area. Protect from freezing. DRY TIME Dry to touch in 30–60 minutes; recoat after 2–4 hours. CLEAN UP Wash tools with warm soapy water. Scrape excess paint before washing. INSPIRED INTERIOR FLAT SUPERIOR COVERAGE SELF- PRIMING LOW ODOR VOC CONTENT STATEMENT Maximum VOC content for untinted base paint and primer: 3 g/L (as determined by ASTM Test Method D 6886). The VOC content may increase after tinting. VOC EMISSIONS STATEMENT Our untinted base paints and primers have zero VOC emissions 14 days after application in a non-residential setting, based on California CDPH Standard Method Section 01350, the most popular US standard for evaluating and restricting VOC emissions for indoor air. VOC emissions may increase after tinting. MOLD RESISTANT Enhanced with antimicrobial protection to provide continuous protection against bacteria, mold, and mildew that cause stains and odors on the dried paint film. SELF-PRIMING Self-priming over surfaces previously painted with water-based paint. For the best finish over new drywall or plaster, prime with Colorhouse Multi-Purpose Primer. For best adhesion, use Colorhouse Multi-Purpose Primer painting on surfaces previously painted with oil- based paint, galvanized metal, and raw wood before top-coating. WARRANTY All Colorhouse paint is backed by a lifetime guarantee for as long as you reside in your home. Visit www.colorhousepaint.com for complete warranty information. *This product is certified by Coating Research Group Inc. to meet performance and environmental standards as shown on www.greenwisepaint.com. The addition of VOC-containing colorants may increase the final VOC of a tinted paint.

Upload: phungkhuong

Post on 02-Apr-2018

218 views

Category:

Documents


3 download

TRANSCRIPT

USE Flat sheen is ideal for ceilings and wall surfaces. It is a wipeable, dura-ble, high-hiding matte finish. Do not use on cabinets, furniture, or floors.

PREP Clean off dirt, dust, and other contaminants. Remove loose paint and patch holes with spackle or caulking. Dull glossy surfaces. This product is self-priming for previously painted surfaces in good condition. When applying to new drywall or over surfaces previously painted with oil paint, prime with Colorhouse Multi-Purpose Primer before painting.

APPLY Stir well. BRUSH: 2½“ angle brush for the straightest lines. ROLL: We like ½” nap roller for smooth walls and ¾” nap roller for texture. SPRAY: Use a .015 - .017 tip on an airless sprayer and wear appropriate protection.

DISPOSAL Don’t pour unused contents down the drain. This is harmful to the environment. Check www.earth911.org for recycling and disposal information.

INGREDIENT LIST (White Base) Water, 7732-18-5; Titanium Dioxide, 13463-67-7; Acrylic Resin, Proprietary; Nephaline Syenite, 37244-96-5; Calcined Kaolin, 66402-68-4

PACKAGING

Recycled content containers

100% PCW chlorine-free labels

100% PCW brochures

PROCESS

LEED® Gold manufacturing facility

Member EPA SmartWay transportation

Renewable energy at HQ

PROVEN

LEED® compliant

Green Wise® certified*

South Coast Air Quality Management District – Super Compliant

MPI Extreme Green certified

PHYSICAL PROPERTIES WEIGHT 11.7lbs per gallon (ASTM D 1475) RESIN TYPE 100% acrylic FINISH 2-3% on a 60° meter, 3-4% on a 85° meter RECOMMENDED DFT Wet: 3.7 mils, Dry: 1.5 mils SOLIDS VOLUME 40% + 2%, SOLIDS WEIGHT 57% + 2% SHELF LIFE 2 years (unopened containers)

© 2017 Colorhouse™ is a trademark of YOLO Colorhouse LLC • 519 NE Hancock Street, #B, Portland, Oregon 97212 • 1.877.493.8276 • www.colorhousepaint.com

INS

PIR

ED™

Product Data Sheet

COVERAGECovers 350–400 square

feet per gallon.

STORAGEStore in a dry area.

Protect from freezing.

DRY TIMEDry to touch in 30–60 minutes;

recoat after 2–4 hours.

CLEAN UPWash tools with warm soapy water. Scrape excess paint before washing.

INSPIRED INTERIOR FLAT

SUPERIOR COVERAGE

SELF-PRIMING

LOWODOR • •

VOC CONTENT STATEMENT Maximum VOC content for untinted base paint and primer: 3 g/L (as determined by ASTM Test Method D 6886). The VOC content may increase after tinting.

VOC EMISSIONS STATEMENT Our untinted base paints and primers have zero VOC emissions 14 days after application in a non-residential setting, based on California CDPH Standard Method Section 01350, the most popular US standard for evaluating and restricting VOC emissions for indoor air. VOC emissions may increase after tinting.

MOLD RESISTANT Enhanced with antimicrobial protection to provide continuous protection against bacteria, mold, and mildew that cause stains and odors on the dried paint film.

SELF-PRIMING Self-priming over surfaces previously painted with water-based paint. For the best finish over new drywall or plaster, prime with Colorhouse Multi-Purpose Primer. For best adhesion, use Colorhouse Multi-Purpose Primer painting on surfaces previously painted with oil- based paint, galvanized metal, and raw wood before top-coating.

WARRANTY All Colorhouse paint is backed by a lifetime guarantee for as long as you reside in your home. Visit www.colorhousepaint.com for complete warranty information.

*This product is certified by Coating Research Group Inc. to meet performance and environmental standards as shown on www.greenwisepaint.com. The addition of VOC-containing colorants may increase the final VOC of a tinted paint.

USE Eggshell sheen is recommended for wall surfaces, including kitchens and baths. It is a washable and scrubbable finish. Do not use on cabinets, furniture, or floors.

PREP Clean off dirt, dust, and other contaminants. Remove loose paint and patch holes with spackle or caulking. Dull glossy surfaces. This product is self-priming for previously painted surfaces in good condition. When applying to new drywall or over surfaces previously painted with oil paint, prime with Colorhouse Multi-Purpose Primer before painting.

APPLY Stir well. BRUSH: 2½“ angle brush for the straightest lines. ROLL: We like ½” nap roller for smooth walls and ¾” nap roller for texture. SPRAY: Use a .015 - .017 tip on an airless sprayer and wear appropriate protection.

DISPOSAL Don’t pour unused contents down the drain. This is harmful to the environment. Check www.earth911.org for recycling and disposal information.

INGREDIENT LIST (White Base) Water, 7732-18-5; Acrylic Resin, Proprietary; Titanium Dioxide, 13463-67-7; Nephaline Syenite, 37244-96-5; Modified Polyether, Proprietary

PACKAGING

Recycled content containers

100% PCW chlorine-free labels

100% PCW brochures

PROCESS

LEED® Gold manufacturing facility

Member EPA SmartWay transportation

Renewable energy at HQ

PROVEN

LEED® compliant

Green Wise® certified*

South Coast Air Quality Management District – Super Compliant

MPI Extreme Green certified

PHYSICAL PROPERTIES WEIGHT 11lbs per gallon (ASTM D 1475) RESIN TYPE 100% acrylic FINISH 10-15% on a 60° meter, 15-30% on a 85° meter RECOMMENDED DFT Wet: 3.7 mils, Dry: 1.5 mils SOLIDS VOLUME 40% + 2%, SOLIDS WEIGHT 54.2% + 2% SHELF LIFE 2 years (unopened containers)

© 2017 Colorhouse™ is a trademark of YOLO Colorhouse LLC • 519 NE Hancock Street, #B, Portland, Oregon 97212 • 1.877.493.8276 • www.colorhousepaint.com

INS

PIR

ED™

Product Data Sheet

COVERAGECovers 350–400 square

feet per gallon.

STORAGEStore in a dry area.

Protect from freezing.

DRY TIMEDry to touch in 30–60 minutes;

recoat after 2–4 hours.

CLEAN UPWash tools with warm soapy water. Scrape excess paint before washing.

INSPIRED INTERIOR EGGSHELL

SUPERIOR COVERAGE

SELF-PRIMING

LOWODOR • •

VOC CONTENT STATEMENT Maximum VOC content for untinted base paint and primer: 3 g/L (as determined by ASTM Test Method D 6886). The VOC content may increase after tinting.

VOC EMISSIONS STATEMENT Our untinted base paints and primers have zero VOC emissions 14 days after application in a non-residential setting, based on California CDPH Standard Method Section 01350, the most popular US standard for evaluating and restricting VOC emissions for indoor air. VOC emissions may increase after tinting.

MOLD RESISTANT Enhanced with antimicrobial protection to provide continuous protection against bacteria, mold, and mildew that cause stains and odors on the dried paint film.

SELF-PRIMING Self-priming over surfaces previously painted with water-based paint. For the best finish over new drywall or plaster, prime with Colorhouse Multi-Purpose Primer. For best adhesion, use Colorhouse Multi-Purpose Primer painting on surfaces previously painted with oil- based paint, galvanized metal, and raw wood before top-coating.

WARRANTY All Colorhouse paint is backed by a lifetime guarantee for as long as you reside in your home. Visit www.colorhousepaint.com for complete warranty information.

*This product is certified by Coating Research Group Inc. to meet performance and environmental standards as shown on www.greenwisepaint.com. The addition of VOC-containing colorants may increase the final VOC of a tinted paint.

USE Semi-gloss sheen is ideal for trim and doors. Do not use on cabinets, furniture, or floors.

PREP Clean off dirt, dust, and other contaminants. Remove loose paint and patch holes with spackle or caulking. Dull glossy surfaces. This product is self-priming for previously painted surfaces in good condition. When applying to new drywall or over surfaces previously painted with oil paint, prime with Colorhouse Multi-Purpose Primer before painting.

APPLY Stir well. BRUSH: 2½“ angle brush for the straightest lines. ROLL: We like ½” nap roller for smooth walls and ¾” nap roller for texture. SPRAY: Use a .015 - .017 tip on an airless sprayer and wear appropriate protection.

DISPOSAL Don’t pour unused contents down the drain. This is harmful to the environment. Check www.earth911.org for recycling and disposal information.

INGREDIENT LIST (White Base) Water, 7732-18-5; Acrylic Resin, Proprietary; Titanium Dioxide, 13463-67-7; Barium Sulfate, 7727-43-7; Styrene/Acrylic Copolymer, Proprietary

PACKAGING

Recycled content containers

100% PCW chlorine-free labels

100% PCW brochures

PROCESS

LEED® Gold manufacturing facility

Member EPA SmartWay transportation

Renewable energy at HQ

PROVEN

LEED® compliant

Green Wise® certified*

South Coast Air Quality Management District – Super Compliant

MPI Extreme Green certified

PHYSICAL PROPERTIES WEIGHT 10.79lbs per gallon (ASTM D 1475) RESIN TYPE 100% acrylic FINISH 40-50% on a 60° meter RECOMMENDED DFT Wet: 3.7 mils, Dry: 1.5 mils SOLIDS VOLUME 40% + 2%, SOLIDS WEIGHT 52.4% + 2% SHELF LIFE 2 years (unopened containers)

© 2017 Colorhouse™ is a trademark of YOLO Colorhouse LLC • 519 NE Hancock Street, #B, Portland, Oregon 97212 • 1.877.493.8276 • www.colorhousepaint.com

INS

PIR

ED™

Product Data Sheet

COVERAGECovers 350–400 square

feet per gallon.

STORAGEStore in a dry area.

Protect from freezing.

DRY TIMEDry to touch in 30–60 minutes;

recoat after 2–4 hours.

CLEAN UPWash tools with warm soapy water. Scrape excess paint before washing.

INSPIRED INTERIOR SEMI-GLOSS

SUPERIOR COVERAGE

SELF-PRIMING

LOWODOR • •

VOC CONTENT STATEMENT Maximum VOC content for untinted base paint and primer: 3 g/L (as determined by ASTM Test Method D 6886). The VOC content may increase after tinting.

VOC EMISSIONS STATEMENT Our untinted base paints and primers have zero VOC emissions 14 days after application in a non-residential setting, based on California CDPH Standard Method Section 01350, the most popular US standard for evaluating and restricting VOC emissions for indoor air. VOC emissions may increase after tinting.

MOLD RESISTANT Enhanced with antimicrobial protection to provide continuous protection against bacteria, mold, and mildew that cause stains and odors on the dried paint film.

SELF-PRIMING Self-priming over surfaces previously painted with water-based paint. For the best finish over new drywall or plaster, prime with Colorhouse Multi-Purpose Primer. For best adhesion, use Colorhouse Multi-Purpose Primer painting on surfaces previously painted with oil- based paint, galvanized metal, and raw wood before top-coating.

WARRANTY All Colorhouse paint is backed by a lifetime guarantee for as long as you reside in your home. Visit www.colorhousepaint.com for complete warranty information.

*This product is certified by Coating Research Group Inc. to meet performance and environmental standards as shown on www.greenwisepaint.com. The addition of VOC-containing colorants may increase the final VOC of a tinted paint.

USE A stain-blocking primer, use on unpainted drywall, raw wood, cured masonry, galvanized metal and aluminum, over oil-based paint and glossy surfaces. Not for use on floors.

PREP Clean off dirt, dust, and other contaminants. Remove loose paint and patch holes with spackle or caulking. Dull glossy surfaces.

APPLY Stir well. BRUSH: 2½“ angle brush for the straightest lines. ROLL: We like ½” nap roller for smooth walls and ¾” nap roller for texture. SPRAY: Use a .015 - .017 tip on an airless sprayer and wear appropriate protection. On smooth drywall (level 4 or 5) thin primer 10% for best results.

DISPOSAL Don’t pour unused contents down the drain. This is harmful to the environment. Check www.earth911.org for recycling and disposal information.

INGREDIENT LIST Water, 7732-18-5; Acrylic Resins, Proprietary; Titanium Dioxide, 13463-67-7; Magnesium Silicate, 14807-96-6, Kaolin, 1332-58-7

PACKAGING

Recycled content containers

100% PCW chlorine-free labels

100% PCW brochures

PROCESS

LEED® Gold manufacturing facility

Member EPA SmartWay transportation

Renewable energy at HQ

PROVEN

LEED® compliant

Green Wise® certified*

South Coast Air Quality Management District – Super Compliant

MPI Extreme Green certified

PHYSICAL PROPERTIES WEIGHT 10.86lbs per gallon (ASTM D 1475) RESIN TYPE Acrylic FINISH 2-8% on a 60° meter RECOMMENDED DFT Wet: 5.5 mils, Dry: 2 mils SOLIDS VOLUME 36.2% + 2%, SOLIDS WEIGHT 50% + 2% SHELF LIFE 2 years (unopened containers)

© 2017 Colorhouse™ is a trademark of YOLO Colorhouse LLC • 519 NE Hancock Street, #B, Portland, Oregon 97212 • 1.877.493.8276 • www.colorhousepaint.com

INS

PIR

ED™

Product Data Sheet

COVERAGECovers 250–350 square

feet per gallon.

STORAGEStore in a dry area.

Protect from freezing.

DRY TIMEDry to touch in 30–60 minutes;

recoat after 2–4 hours.

CLEAN UPWash tools with warm soapy water. Scrape excess paint before washing.

INSPIRED INTERIOR MULTI-PURPOSE PRIMER

STAINBLOCKING

EXCELLENTADHESION

LOWODOR • •

VOC CONTENT STATEMENT Maximum VOC content for untinted base paint and primer: 3 g/L (as determined by ASTM Test Method D 6886). The VOC content may increase after tinting.

VOC EMISSIONS STATEMENT Our untinted base paints and primers have zero VOC emissions 14 days after application in a non-residential setting, based on California CDPH Standard Method Section 01350, the most popular US standard for evaluating and restricting VOC emissions for indoor air. VOC emissions may increase after tinting.

MOLD RESISTANT Enhanced with antimicrobial protection to provide continuous protection against bacteria, mold, and mildew that cause stains and odors on the dried paint film.

STAIN BLOCKING When using Multi-Purpose Primer as a stain blocker, allow primer to dry for 24 hours before painting. Some stains may require 2 coats.

WARRANTY All Colorhouse paint is backed by a lifetime guarantee for as long as you reside in your home. Visit www.colorhousepaint.com for complete warranty information.

*This product is certified by Coating Research Group Inc. to meet performance and environmental standards as shown on www.greenwisepaint.com. The addition of VOC-containing colorants may increase the final VOC of a tinted paint.

USE Chalkboard paint turns any interior surface into a chalkboard. For best results, apply over smooth surfaces.

PREP Clean off dirt, dust, and other contaminants. Remove loose paint and patch holes with spackle or caulking. Dull glossy surfaces. Prime new drywall, wood, aluminum, existing oil base paint and glossy surfaces with Colorhouse Inspired Multi-Purpose Primer before painting.

APPLY Stir well. BRUSH: 2½“ angle brush for the straightest lines. ROLL: We like ½” nap roller or a foam roller on smooth walls for best chalkboard results.

TIPS Allow chalkboard paint to dry for 48 hours before using the chalkboard surface. Prior to the first use, rub the entire surface with the side of a piece of chalk and then dry erase. Your chalkboard is now ready to use. Chalk residue can be removed with a damp cloth once the paint has dried for 7 days. Repeat rubbing the entire surface with the side of a piece of chalk before using again.

DISPOSAL Don’t pour unused contents down the drain. This is harmful to the environment. Check www.earth911.org for recycling and disposal information.

INGREDIENT LIST (White Base) Water, 7732-18-5; Titanium Dioxide, 13463-67-7; Acrylic Resin, Proprietary; Nephaline Syenite, 37244-96-5; Calcined Kaolin, 66402-68-4

PACKAGING

Recycled content containers

100% PCW chlorine-free labels

100% PCW brochures

PROCESS

LEED® Gold manufacturing facility

Member EPA SmartWay transportation

Renewable energy at HQ

PROVEN

LEED® compliant

South Coast Air Quality Management District – Super Compliant

PHYSICAL PROPERTIES WEIGHT 11.7lbs per gallon (ASTM D 1475) RESIN TYPE 100% acrylic FINISH 2-3% on a 60° meter, 3-4% on a 85° meter RECOMMENDED DFT Wet: 3.7 mils, Dry: 1.5 mils SOLIDS VOLUME 40% + 2%, SOLIDS WEIGHT 57% + 2% SHELF LIFE 2 years (unopened containers)

© 2017 Colorhouse™ is a trademark of YOLO Colorhouse LLC • 519 NE Hancock Street, #B, Portland, Oregon 97212 • 1.877.493.8276 • www.colorhousepaint.com

Product Data Sheet

COVERAGECovers 90 -100 square

feet per quart.

STORAGEStore in a dry area.

Protect from freezing.

DRY TIMEDry to touch in 30–60 minutes; recoat after

8 hours. Allow 48 hours before chalking; 1

week before using a damp cloth.

CLEAN UPWash tools with warm soapy water. Scrape excess paint before washing.

INTERIOR CHALKBOARD

CHA

LKB

OA

RD™

VOC CONTENT STATEMENT Maximum VOC content for untinted base paint and primer: 3 g/L (as determined by ASTM Test Method D 6886). The VOC content may increase after tinting.

VOC EMISSIONS STATEMENT Our untinted base paints and primers have zero VOC emissions 14 days after application in a non-residential setting, based on California CDPH Standard Method Section 01350, the most popular US standard for evaluating and restricting VOC emissions for indoor air. VOC emissions may increase after tinting.

MOLD RESISTANT Enhanced with antimicrobial protection to provide continuous protection against bacteria, mold, and mildew that cause stains and odors on the dried paint film.

SELF-PRIMING Self-priming over surfaces previously painted with water-based paint. For the best finish over new drywall or plaster, prime with Colorhouse Multi-Purpose Primer. For best adhesion, use Colorhouse Multi-Purpose Primer painting on surfaces previously painted with oil- based paint, galvanized metal, and raw wood before top-coating.

WARRANTY All Colorhouse paint is backed by a lifetime guarantee for as long as you reside in your home. Please see www.colorhousepaint.com for complete warranty information.