Insight is Everything

FMS is a full featured, contour following 10-Axis Floor Mounted Scanner consisting of

a steel frame support structure, two x-axis primary carriages, two Y-axis horizontal arms,

two Z-axis vertical towers, and two gimbals about X, two gimbals about Z, and two

nozzle assemblies.

FMS includes all ultrasonic equipment, acquisition, and software, and water system.

All motors and encoders are fully compatible with Marietta NDT MultiScan motion

control software with full contour following capability .

FMS10-Axis Dual Squirter Ultrasonic System

FMS Bene�ts• Full contour scanning of complex cored and

solid laminate components

• Meets stringent uniformity requirements on

complex shapes

• Very large scan envelopes

• Flexible �xturing options

• Dual frequency capability for a faster, more

complete part analysis

• Simultaneous PE and TTU scanning mode

signi�cantly reduces inspection time

• Capable of Phased Array, Pulse Echo, and

Through Transmission scan modes

PRODUCT IMAGE CLIPPED

(As shown, 10’X, 12’Y, 8’Z)

530 Commerce Park DriveMarietta, GA 30064-2719770.528.9000marietta-ndt.com

ULTRASONICS | X-RAY | TURNKEY SYSTEMS

Insight is Everything

FMS10-Axis Dual Squirter Ultrasonic System

• All motors and encoders are fully compatible with Marietta NDT MultiScan motion control software with full contour following capability

• Magnetic breakaway nozzles help prevent system and part damage

• Linear rails have stainless steel cover strips over all mounting holes to prevent dust and debris from entering guide bearings and causing premature wear

• Dual cable carriers for the majority of system axes to reduce RF noise and ensure high signal to noise ratios

• High speed/high resolution scanning modes

• CAD model import module

• O�ine programming software for validation and optimization of scan plan

• Optional horizontal rotary axis

530 Commerce Park DriveMarietta, GA 30064-2719770.528.9000marietta-ndt.com

ULTRASONICS | X-RAY | TURNKEY SYSTEMS