injection moulding - triaplastics.cominjection moulding granulator for imm up to 200 m/tons, in line...
TRANSCRIPT
INJECTION MOULDINGGranulator for IMM up to 200 m/Tons,in line runners to150°C, cold scraps
Grinding of all plastics , from TPU to PA6.6,filled with glass up to 25%
Optimal in-feed of the regrind materialinto dosing and feeding system
Your recycling needs. Our grinding solutions.
- R otary discs integral with the rotor and containment rings av oid ov erheating and dust production
- E asy tool free access to screen, hopper, grinding chamb er
- S hape, orientation and shutter of hoppers greatly reduce fly-b ack
- K eys for the fix ing of motor pulley and flywheel- Pulley and flywheel design giv es higher inertia
Efficient solutionsRegrind quality material
Energy efficiency Easy operation and maintenance
H omogeneous and uniform regrind constantlyproduced. Mechanical and physical properties ofplastics unchanged.
D iv erse production range of machines for recov ery of scraps of v arying siz e and weight maintenance reduced to the minimum.
L owest running cost ex pressed in k W h/k g available on the market. Reaction power cosφ reduced to minimum thus hav ing a direct impact on hourly energy cost.
R educed mainenance freq uency and downtimeb y adv ance engineering design. S afety of operator during use and maintenance.
Your recycling needs. Our grinding solutions. © Tr
ia 20
16 -
JM01
rev.0
0
TRIA S.p.A.v ia E . F ermi, 82009 3 Cologno Monz ese MIITAL IA
tel +3 9 .02.27 3 4 51fax +3 9 02.254 2101e-mail info@ triaplastics.comwww.triaplastics.com
JM SeriesJ M 2018
JM SeriesJ M 3 220J M 4 220
SMGL SeriesS MGL 100S MGL 200
System
Our granulators