Indoor Localization Demo Setup

DEMO3 個人星期二 dry run, 早上 9AM星期三 記者會 科技大樓 下午 DEMO 5 分鐘3, 去科技大樓 , Polly, sy, <vincent>3, 在學校 demo, [ steven ], [ steve ], [ jason ],

[ km ], [ 羅倫斯 ] , [ helen ], [ 布萊恩 ]養家活口 , [ 教授 ]

System OverviewHardware

Program taroko nodes Beacon Sink & Relay (MD) User tags

SoftwarePosition system

Position System(Server, 140.112.42.161)

TestBed

Tag

Tag

Tag

USB

Position System(client, any computers)

Internet

Hardware - servers實驗室 (621)

IP: 140.112.42.161Name/Password: nslab/ns621

Polly 辦公室 (613)IP: 140.112.42.157Name/Password: nslab_winpc/ns621

Hardware – user tagNeed 2 tag, one with bio sensorCan be programmed from 140.112.42.161cd /opt/justinh/demo/apps/Localization/tagType “make telosb install.ID bsl,COM-1” in cygwin

ID: id number, COM-1: com port number - 1Be Carefull !!

Check the ID of bio sensor and then program the tag with same ID

Hardware – testbedLogin 140.112.42.161

Open cygwin In cygwin console

cd /opt/justinh/demo/apps/scripts ./system-allinone-161

Login 140.112.42.157Open cygwin In cygwin console

cd /opt/tinyos-1.x/justinh/demo/apps/scripts ./system-allinone-157

Software – ServerLogin 140.112.42.161

Open Position SystemAll setting should be load automatically ( map, beacon, …)Connection > Serial Port > Connect

Select COM103, baurate 57600Connection > Internet > Server > Connect

Choose a port numberCheck the data is shown at “Connection Log” pageToggle, View > User and BioPress “Start”

Software – ClientAny Computers

Open Position SystemAll setting should be load automatically ( map, beacon, …)Connection > Internet > Client > Connect

140.112.42.161:[PORT]Check the data is shown at “Connection Log” pageToggle, View > User and BioPress “Start”

Possible TroublesTaroko programming fail

Check the message after typing “./system-allinone-161,157”A taroko is programming successfully if “Reset device…” is

shownSolution: Re-program, re-plug USB, re-boot computer

Serial port connection failRe-start Position System, re-boot computer