individual handmade beaded earrings
TRANSCRIPT
Unique jewelry design-individual handmade beaded earrings
Do you remember a time when you completely fell in
love with a jewelry design? Well it happened to me
several months ago. While I was suffering the
internet, I came across a pair of handmade beaded
earrings. I would describe it as chain caged pearl
earrings. So, I decided to make and show you the
project here. I hope that you also love this unique
jewelry design.
Things you’ll need in handmade beaded earrings:
10 mm Pearl Beads
Earring Hook
Jumpring
Chain
0.5mm Brass Wire
Flat Nose Plier
Round Nose Plier
Side Cutting Plier
Instructions on the unique jewelry design:
Make this pair of handmade beaded earrings with the following easy to do instructions. You can freshen up
any outfit with this unique jewelry design!
: Cut a long piece of brass wire and Step 1
make a wire-wrapped loop at one end.
: Take a 50cm long chain segment Step 2
and thread it onto the wire as picture shows.
Each section can differ in length.
: Add on the pearl bead. Step 3
Repeat the same steps to make the second earring.
This design is pretty versatile and really punk as
well. In my handmade beaded earrings tutorial, I
only use of one type of chain; however, you can also
try several chains and sizes. The tangled chain cage
highlights the entire unique jewelry design idea.
Feel free to have a try.
Search for more earring settings for your earring making please click:
www.pandahall.com/wholesale-Earring-Settings/319.htm
: Thread the three strands of chain onto Step 4
wire again as to form a cage. The locations may
entirely depend on your individual preference.
: Make another wire-wrapped loop Step 5
above the bead using round nose pliers.
: Add on the earrings hooks. Step 6