indicator lights neon, led and filament · pdf fileindicator lights to match 8500, 8600, r13,...
TRANSCRIPT
indi
cato
rs
66
0.9
14.0 32.5 1.5 Ø6.7
Ø7.610.24.3
22.6 4.3 Ø7.6
12.0 23.7 2.7200.0
Ø7.0
12.0 23.7 2.3200.0
Ø7.0
12.0 23.7 1.0200.0
Ø7.0
APPROVAL
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
C 6.3
L
W
L
W
B 2.8
L
B 2.8
L
B 2.8
L
(L) 1041 OO Chrome bezel
(C) 0145 AA
(L) 1045 OO Chrome bezel available
(B) 0566 A
(B) 0566 B
(B) 0566 C
Colours and voltages:
Neon Available with Red, Amber, Green or Clear lenses100/130V (marked 110V), 200/250V (marked 230V)
LED - DC Red, Yellow, Green, Blue, White2.0/2.2V Resistors for other voltages available.
LED - AC Red, Yellow, Green, Blue, White110-230V ac operation.
Filament lamp Available with Red, Amber, Green, Clear or Blue lenses6V, 12/14V, 24/28V.
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon, LED or filament lamp
� Neon, LED, mains LED orfilament lamp
� Bezel sizes from 6.7 to 16.3mmdiameter
� Red, amber, green, blue andclear lenses
� Red, yellow, green, blue andwhite LEDs
� Wide choice of styles
DC
AC
5.8
3.0max
page 6
6.3
6.3max
page 6
6.3
10.0max
page 6
DC
AC
DC
AC
DC
6.0
2.0max
page 6
DC
AC
6.0
2.0max
page 6
DC
AC
6.0
2.0max
page 6
DC
AC
PANEL & ˚CILLUM’NOPTIONS DIMENSIONS (mm)TERM TYPE
DC
AC
Indicator Lights Neon, LED and Filament Lamp
22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 16/11/11 10:40 Page 66
Ø7.5
Ø9.8
3.7
8.527.0
3.027.5
27.5
13.0 9.5 Ø10.0
2.327.5
27.5
13.0 9.5 Ø9.5
indicators
67
Ø7.64.222.5
Ø7.5
Ø9.0
12.6
3.927.0
Ø9.5
7.912.5 13.7
18.0Ø9.5
11.0
APPROVAL
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
L
H 4.8
4
L
H 4.8
L 8.0
0.8-1.6
page 6
8.0
0.8-3.5
page 6
8.0
0.8-3.5
page 6
DC
AC
DC
DC
(H) 0568 A(*) Deep lens profile
(VDE at T100)
(H) 0568 B(*) Shallow lens profile
L 2951 OO Chrome bezel
7.1
6.3max
page 6
8.0
0.8-1.6
page 6
8.0
0.8-3.0
page 6
DC
AC
DC
AC
L
W
L
L
C 6.3
(L) 0245 OO Chrome bezel available
L 2950 OO Chrome bezel available
(L) 0195 BB
PANEL & ˚CILLUM’NOPTIONS DIMENSIONS (mm)TERM TYPE
*Final suffix (X) - Long barrier*Final suffix (Y) - Short barrier*Final suffix (L) - For Wires
*Final suffix (X) - Long barrier*Final suffix (Y) - Short barrier*Final suffix (L) - For Wires
22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 16/11/11 10:40 Page 67
indi
cato
rs
68
32.522.2
16.0
32.7
3.0 Ø13.3
3.5
32.532.0
22.2
16.0
32.7
3.0
Ø13.3
Ø15.6
33.7
4.033.022.2 Ø12.0
32.83.1
Ø12.2
33.5
22.2
8.5 max
3
23.0 12.0
3.019.0
Ø10.0
12.0 Sq.23.5 3.5
23.5
22.3
Indicator Lights Neon, LED and Filament Lamp
Colours and voltages:
Neon Available with Red, Amber, Green or Clear lenses100/130V (marked 110V), 200/250V (marked 230V)
LED - DC Red, Yellow, Green, Blue, White2.0/2.2V Resistors for other voltages available.
LED - AC Red, Yellow, Green, Blue, White110-230V ac operation.
Filament lamp Available with Red, Amber, Green, Clear or Blue lenses6V, 12/14V, 24/28V.
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon, LED or filament lamp
� Neon, LED, mains LED orfilament lamp
� Bezel sizes from 6.7 to 16.3mmdiameter
� Red, amber, green, blue andclear lenses
� Red, yellow, green, blue andwhite LEDs
� Wide choice of styles
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
L
C 6.3
K 2.8
H 4.8
L
9.5
0.8-2.8
page 6
10.0
12.0 max
page 6
10.0
11.5 max
page 6
9.0
2.0 max
page 6
9.0
0.8-2.5
Callsales
9.0
2.0 max
page 6
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
(C) 0273 OO
(L) 0569 AW
(C) 0278 OO
(C) 0275 OO
(C) 0275 OO Chrome bezel
(C) 0276 AA
PANEL & ˚CTERM TYPE
DC
AC
APPROVAL
DC
AC
DC
AC
DC
AC
DC
AC
DC
AC
DC
AC
ILLUM’NOPTIONS DIMENSIONS (mm)
22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 16/11/11 10:41 Page 68
5.0 22.810.0 Ø13.6
1.825.1
10.0 15.5 Sq
Ø14.522.8
1.6 10.0
indicators
69
53.73.3
8.3
14.9
32.2
22.2Ø14.6
33.7
4.033.022.2 Ø12.0
For sub-panel mounting, behind a facia.
18.4 16.6 Ø8.8
35.7
22.2
(C) 0277 OO Chrome bezel
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
(C) 2820 OO
(C) 0586 OO
12.0
0.75-2.0
page 6
12.5
0.8-1.5
page 6
12.0or12.7
page 6
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
ø12.0= 0.8-2.5ø12.7= 1.1-2.5
(C) 2821 OO
10.0
2.8 max
page 6
10.0
12.0 max
page 6
10.0
0.6-2.0
page 6
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
(C) 0277 OO Chrome bezel
(C) 0276 OO
(C) 0273 LL
PANEL & ˚C DIMENSIONS (mm)TERM TYPE APPROVAL
DC
AC
DC
AC
DC
AC
DC
AC
DC
AC
DC
AC
ILLUM’NOPTIONS
22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 16/11/11 10:41 Page 69
indi
cato
rs
70
5.138.1 Ø16.0
5.122.310.4
1.321.3
Ø15.0
Starlock fixing
22.2
14.9
3.38.353.7
32.2
Ø14.6
5.0 22.89.9
Ø13.6
Ø18.311.418.0
Ø16.0
Ø15.921.610.5 3.2
Indicator Lights Neon, LED and Filament Lamp
Colours and voltages:
Neon Available with Red, Amber, Green or Clear lenses100/130V (marked 110V), 200/250V (marked 230V)
LED - DC Red, Yellow, Green, Blue, White2.0/2.2V Resistors for other voltages available.
LED - AC Red, Yellow, Green, Blue, White110-230V ac operation.
Filament lamp Available with Red, Amber, Green, Clear or Blue lenses6V, 12/14V, 24/28V.
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon, LED or filament lamp
� Neon, LED, mains LED orfilament lamp
� Bezel sizes from 6.7 to 16.3mmdiameter
� Red, amber, green and clearlenses
� Red, yellow, green, blue andwhite LEDs
� Wide choice of styles
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
(C) 0067 OO Chrome bezel
(C) 0180AA
(C) 0177 OO Chrome bezel
(C) 2870 OO
L 0081 OO Chrome bezel
(C) 0589 OO
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
C 6.3
12.7
12.0max
page 6
12.7
1.14max
page 6
12.7
19.0max
page 6
12.7
0.75-2.0
page 6
12.7
0.8-1.5
page 6
12.7
9.5
page 6
L
C 6.3
K 2.8
H 4.8
L
C 6.3
K 2.8
H 4.8
L
DC
AC
PANEL & ˚C DIMENSIONS (mm)TERM TYPE APPROVAL
DC
AC
DC
AC
DC
DC
AC
DC
AC
DC
AC
ILLUM’NOPTIONS
22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 16/11/11 10:41 Page 70
indicators
71
3.225.410.0 Ø15.9
5.122.310.4
Ø16.35
15.0max
Ø22.9
26.9 Ø22.9
(C) 0579 OO
(C) 0180BB Chrome bezelL
C 6.3
L
C 6.3
K 2.8
H 4.8
13.5
0.9-1.14
page 6
14.0
2.5max
page 6
C 6.3 19.0
4.0max
page 6
(C) 1092
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
PANEL & ˚C DIMENSIONS (mm)TERM TYPE APPROVAL
DC
DC
AC
AC
ILLUM’NOPTIONS
22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 16/11/11 10:41 Page 71
indi
cato
rs
72
26.332.3
11.38.0
9.0
3.34.3
11.0
60.0
Ø6.4Red &Amber
L77
M1068
19.09.02.0
8.0
20.018.0
6.0
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
Indicator Lights Neon, LED and Filament Lamp
Colours and voltages:
Neon Available with Red, Amber, Green or Clear lenses100/130V (marked 110V), 200/250V (marked 230V)
LED - DC Red, Yellow, Green, Blue, White2.0/2.2V Resistors for other voltages available.
LED - AC Red, Yellow, Green, Blue, White110-230V ac operation.
Filament lamp Available with Red, Amber, Green, Clear or Blue lenses6V, 12/14V, 24/28V.
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon, LED or filament lamp
� Neon, LED, mains LED orfilament lamp
� Bezel sizes from 6.7 to 16.3mmdiameter
� Red, amber, green and clearlenses
� Red, yellow, green, blue andwhite LEDs
� Wide choice of styles
H 0581 AY
L 0234 OO
L 0233 OO
H 4.8
L
L
2.0-3.5
page 6
18.2/18.3x
6.2/6.3*
0.71-1.62
page 6
9.27/9.50x
4.75*
page 6
PANEL & ˚C DIMENSIONS (mm)TERM TYPE
DC
AC
Neon tube, resistor and flexible lead assembly,protected by “shrunk on” transparent sleeving.
APPROVALILLUM’NOPTIONS
22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 16/11/11 10:41 Page 72
Indicator Lights To match 8500, 8600, R13, 1500, 1550, 5500, 8300 and 7000 switchesindicators
73
APPROVAL
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon or filament lamp.
Colours and voltages:Neon Available with Red, Amber, Green or Clear lenses
100/130V (marked 110V), 200/250V (marked 230V)Filament lamp Available with Red, Amber or Green lenses
6V, 12/14V, 24/28V
� Indicator lights� Neon or filament lamp� Bezel sizes from 6.7 to 16.3mm
diameter� Red, amber green and clear
neons� Red, amber and green filament
lamps� Styles to match rocker and push
switches
TERM TYPE
H 4.8
H 4.8 H8580 AB
C0480 A
C7030 AH
C 6.3
T U
K 2.8
C 6.3
T U
H 4.8
K 2.8
C 6.3
H 4.8
Y
X 21.0
15.0
Body Panel Cut-outCode thickness X YB 0.75-1.25 19.1/19.2 12.9/13.0
1.25-2.0 19.3/19.4 12.9/13.02.0-3.0 19.7/19.8 12.9/13.0
Y
X
Y
X
Body Cut-out FlangeCode Y X Y XA 12.2/12.3 27.2/27.3 14.0 30.2B 11.0/11.1 30.0/30.1 14.0 33.4L 11.0/11.1 30.0/30.1 14.0 31.9R 14.0/14.1 28.5/28.6 17.0 31.5T 11.5/11.6 28.2/28.3 14.0 30.2
Y
X
Y
X
Body Cut-out FlangeCode Y X Y XA 22.3/22.4 27.2/27.3 25.0 30.2B 22.1/22.2 30.0/30.1 25.0 33.4L 22.1/22.2 30.0/30.1 25.0 32.0R 23.0/25.4 28.4/28.5 28.9 33.2T 22.3/22.4 28.2/28.3 25.0 30.2
Ø28.0
Body Cut-out FlangeCodeH Ø25.0/25.2 Ø28.0
25.0/25.2
Cut-out FlangeFull product details on pages 12-13
Cut-out FlangeFull product details on pages 22-23
Cut-out FlangeFull product details on pages 28-29
Cut-out FlangeFull product details on pages 44-45
H 4.8 R9 92BCut-out Flange
Full product details on pages 33
Snap fixing in panels thickness up to 3.0
0.9Ø20.2
2.2
Ø23.0
H 4.8
T
X
H8630 FB Cut-out Flange
Y
X 21.0
15.0
X
Body Panel Cut-outCode thickness X YB 0.75-1.25 19.1/19.2 12.9/13.0
1.25-2.0 19.3/19.4 12.9/13.02.0-3.0 19.7/19.8 12.9/13.0
Full product details on pages 14-15
Approvals details- contact sales
C0430 A
DC
DC
ILLUM’NOPTIONS
22-Cat171_P066-073|Indicator Lights:Cat No.171_Oct 2011 17/11/11 15:51 Page 73
indi
cato
rs
74tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
9.5
0.9-1.14
T85
12.7
1.14max
T85
12.7
9.6max
T85
12.7
9.6max
T85
T85
C0067 OO (BA7s) Chrome bezel
T0062 AO (Midget flange) Chrome bezel
T0063 AO (LES) Chrome bezel
T0061 OO (LES)
T0063 MO (LES)
S0095 OO
T0062 MO (Midget flange)
DIMENSIONS (mm)
T
C 6.3
T
T
S
TERM
6
TYPE PANEL & ˚C
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colourand voltage.
Colour and voltage:These lampholders are suitable for up to 50V max.Bulbs will be supplied (dependent on order quantity)if a voltage is specified.
Colours - Red, Amber, Green, (Clear & Blue, check availability).
� Up to 50V� Red, Amber, Green, Blue andClear
� Linestra/Philinea lamp holder
Ø16.05.144.5
9.121.3 Ø14.7
Front of panel bulb replacement
9.121.3 Ø14.7
Front of panel bulb replacement
6.3 23.7 4.8 Ø12.7
Rear of panel bulb replacement
Rear of panel bulb replacement
Paired Architectural lampholders for Linestra orPhilinea lamp.
38.1
33.3
17.5
13.5
4.7mm CS Hole
25.4
Lamp
Holders
Low Voltage Lampholders
23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:48 Page 74
indicators
Low Voltage Lampholders
DIMENSIONS mm
� Up to 50V
� MES or MBC bulb
� Flat and domed lens
� Brass or nylon bodies
� Red, Amber, Green, Blueand Clear lenses
75
C
6.3 x 0.8
T
Solder
S
Screw and Clamp
A
B
TERMINAL LAMP CAP LENS BODY VOLTAGE, COLOUR, ETC
C 1090 F A - - -
LAMP CAP
FFlat
VDomed
LNo lens
1090MES (E10)
1091MBC (BA9s)(C and S Terminalsonly)
LENS THREADED BODYTERMINAL
C1090FP - - - P1090FL - - -
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
A 19.0 Brass 35.0 22.0
E 19.0 Nylon 30.2 22.0with chrome bezel 30.2 22.8
G 19.0 Brass 24.6 22.0
H 19.0 Nylon 24.6 22.0with chrome bezel 24.6 22.8
Panel thickness 5.0, except A type body 10.0
B 19.0 Brass 36.0 22.0
C 19.0 Nylon 36.6 22.0
Q 19.0 Nylon 36.6 22.8(+ chrome trim)
1091 (MBC lamps)
Panel Body Dim. Dim.Hole Dia. Material A B
1090 (MES lamps)
Panel Body Dim. Dim.Hole Dia. Material A B
OPTIONS
F0445 MOP.V.C. Insulating terminal cover.
D 19.0 Brass 30.2 22.0
9.1
9.1
Ø2.04.8
9.1
L 25.4 Brass 26.0 31.5
M 25.4 Brass 38.1 31.5
Bulbs will be supplied (dependant on order quantity) if a voltage isspecified. These lampholders are suitable for up to 50V max.
Colours - Red, Amber, Green, (Clear & Blue, check availability).Brass bodies have polished chrome finish.
For Neon & Mains versions see page 71For Sealed version see page 80
23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:48 Page 75
indi
cato
rs
76
LED Lamps and LED LampholdersLED Lampholders can be supplied with or without LEDs
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
DIMENSIONS (mm)
Ø10.012.4
2.9
16.9
Ø9.52
10.02.0
14.5
Ø7.612.713.9
1.5
(L) 1048 OO
(W) 1050 OO
(W) 1047 OO
5mm LED with focusing reflector
5mm LED
3mm LED
6.3
6.3max
T85
8.0
5.5max
T85
8.0
7.0max
T85
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: LED colour andvoltage and body finish (Black or Chrome).
Colours: Red, Yellow, Green and Blue LEDs(High Intensity is standard. Option of extra super bright).
Voltages: LEDs are available for direct connection to 2.0/2.2V or 12VdcFor other voltages contact sales.
� LED lampholders� Supplied with or without LEDs� Black or Chrome finish
TYPETERM PANEL & ˚C
W LED fitted
A LED not fitted
L LED & Wiresfitted
W LED fitted
A LED not fitted
L LED & Wiresfitted
W LED fitted
A LED not fitted
L LED & Wiresfitted
1.50
20.01.0
200.0
4.30
5
(L) 1035 OA 4.5
0.9-1.6
T85
W LED fitted
L LED & Wiresfitted
7.94.0
20.01.0
200.0
5.85
(L) 1036 OA 6.0
0.9-1.6
T85
W LED fitted
L LED & Wiresfitted
7.9
20.01.0
200.0
6.15
4.07
(L) 1037 OA 6.35
0.9-1.6
T85
W LED fitted
L LED & Wiresfitted
5.08
Approvals and specifications
23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:48 Page 76
indicators
Neon & LED Indicator Lights Sealed to IP52 and IP54
36.0 9.0
Ø13.0
Ø18.0
34.0 Ø2.0
45.0
Ø16.0
4.0Ø20.5
34.0
2.0
45.0
Ø16.0
4.0Ø20.5
38.0 2.0
45.0
Ø22.0
14.0Ø30.0
Select the version most suitable for your application fromthe 4 types shown.Or call sales for availability to your special requirements.
77tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
RecessedScrew
RecessedScrew
RecessedScrew
RecessedScrew
DIMENSIONS (mm)
13.2
8.0max
T120 neonT50 LED
16.2
5.0max
T120 neonT50 LED
16.2
5.0max
T55 neonT50 LED
22.3
4.5max
T120 neonT50 LED
Colours and voltages:Neon Red, Amber, Green
120 or 230Vac 0.5W - please specify (Red base)
LED Red, Amber, Green28Vac/dc 1W (Green base)
Neon versions feature integral current limiting & ghost lighting resistors.LED versions have rectifier diodes & resistors for direct connection to 28Vac/dc.
� IP52 and IP54 sealing
� Three bezel sizes: 18.0, 20.5and 30.0 diameter
� Neon or LED indicator
� Black and satin chrome bezel orwithout bezel
� Recessed screw terminalsTo orderSelect a number from the “type” column, then state:Lens colour, voltage and whether neon or LED. All versions have recessedscrew terminals. IP52 is standard. A panel sealing washer is available for IP54.
Approval shown for neon versions only
3161 Satin chrome style bezel
3130 No bezel
3160 Black bezel
3221 Large black bezel
TERM TYPE PANEL & ˚C
Approvals and specifications
23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:48 Page 77
indi
cato
rs
78
Ø9.59.94.5
Ø9.54.522.2
Colours and voltages:
Neon Available with Red, Amber, Green or Clear lenses100/130V (marked 110V), 200/250V (marked 230V)
LED - DC Red, Yellow, Green, Blue, White2.0/2.2V Resistors for other voltages available.
LED - AC Red, Yellow, Green, Blue, White110-230V ac operation.
Filament lamp Available with Red, Amber, Green, Clear or Blue lenses6V, 12/14V, 24/28V.
DIMENSIONS (mm)
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colour,voltage and whether neon, LED or filament lamp
� IP67 Panel Sealing� Supplied complete withgaskets/’O’ rings
� Neon, LED, mains LED orfilament lamp
� Bezel sizes from 7.6 to 22.9mmdiameter
� Red, amber, green, blue andclear lenses
� Red, yellow, green, blue andwhite LEDs
� Wide choice of styles
DC
AC
6.3
5.3 max
7.1
4.6 max
PANEL
AC
D
DC
DC
AC
L
L
TERM TYPE
(L) 1041 OS Chrome bezel
(L) 0245 OS Chrome bezel
10.0
11.5 max
L
H 4.8
C 6.3
K 2.8
DC
AC
(C) 0275 OS Chrome bezel
53.73.3
8.3
14.9
32.2
22.2Ø14.6
10.0
11.5 max
L
H 4.8
C 6.3
K 2.8
DC
AC
(C) 0277 OS Chrome bezel
22.2
14.9
3.38.353.7
32.2
Ø14.6
(C) 0177 OS Chrome bezelL
H 4.8
C 6.3
K 2.8
12.7
11.5 max
DC
AC
D
C 6.3
19.0
4.0 max
(C) 1092 FFS
12.5� max
28.5 Ø22.9
32.022.2
15.5
32.2
3.5 Ø15.6
Indicator Lights - Sealed to IP67
APPROVALILLUM’NOPTIONS
DC
AC
D
23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:49 Page 78
indicators
79
LED Lamps and LED Lampholders - Sealed to IP67LED Lampholders can be supplied with or without LEDs
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
Properties
SealingO-ring sealing equivalent to IP67, of both the LED to bezel, and bezel to panel isavailable where shown.
PolarityThe nylon base mouldings are polarity marked.
Body Material and FinishChromed brass or Black oxide coated brass.
Lampholders onlyItems prefixed ‘A’ are supplied without LEDs.
LED wires or PVC covered wire leads125mm min length wires, 6.3mm standard strip.Alternative colours, length and strip available.
DIMENSIONS (mm)
Ø 10.013.42.9
17.9
1.0
Ø 9.511.0
2.0
15.5
1.0
Ø10.013.42.9
17.9
1.0
Ø 9.511.02.0
15.5
1.0
W
LED fitted
ALEDnot fitted
W
LED fitted
ALEDnot fitted 5mm LED
5mm LED
5mm LED with focusing reflector
5mm LED with focusing reflector
L
LED &Wires fitted
L
LED &Wires fitted
8.0
5.5max
T85
8.0
5.5max
T85
8.0
7.0max
T85
8.0
7.0max
T85
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: LED colour andvoltage and body finish (Black or Chrome).
Colours: Red, Yellow Green and Blue LEDs.(High Intensity is standard. Option of extra super bright).
Voltages: LEDs are available for direct connection to 2.0/2.2V or 12Vdc.For other voltages contact sales.
TYPETERMPANEL& ˚C
� IP67 front bezel sealing� LED lampholders� Supplied with or without LEDs� Black or Chrome finish
(W) 1048 OA
L 1048 OA
(W) 1050 OA
L 1050 OA
DC
DC
AC
D
AC
DC
AC
DC
AC
D
APPROVALILLUM’NOPTIONS
23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:49 Page 79
indi
cato
rs
80
Low Voltage Lampholders - Sealed to IP67
19.0
4.0 max
T85
19.0
4.0 max
T85
12.7
8.5 max
T85
12.7
8.5 max
T85
tel: +44 (0)20 8979 3232 • Arcolectric • email: [email protected]
T0062 AOS (Midget flange) Chrome bezelT0063 AOS (LES) Chrome bezel
C1090 FPS (MES)
T0062 MOS (LES & Midget flange)T0063 MOS (LES)
DIMENSIONS (mm)
C 6.3
C 6.3
T
T
To create a catalogue number:Refer to the 2 columns below (terminal and type), then state: Lens colourand voltage.
Colour and voltage:These lampholders are suitable for up to 50V max.Bulbs will be supplied (dependent on order quantity)if a voltage is specified.
Colours - Red, Amber, Green, (Clear & Blue, check availability).
� IP67 Panel seal� Supplied complete withgaskets/‘O’ rings
� Up to 50V� Red, Amber, Green, Blue andClear
� LES, Midget Flange, MES &MBC bulb
9.121.3 Ø14.7
9.521.3 Ø14.7
30.2 12.5 max
3
C1091 FQS (MBC)
35.0 12.5 max
F0445 MOP.V.C. Insulating terminal cover.For use with C1090 & C1091
Front of panel bulb replacement
Front of panel bulb replacement
PANELTERM TYPE APPROVALILLUM’NOPTIONS
23-Cat171_P074-080|Low Voltage Lampholders:Cat No.171_Oct 2011 16/11/11 10:49 Page 80