index of exhibitors joint stand innovations from bavaria€¦ · joint stand innovations from...
TRANSCRIPT
Paris France
Hall 7.3 Stand M31
Joint StandInnovations from Bavaria
Index of exhibitors
11 – 13 March 2014
Table of Contents
Bayern Innovativ GmbH 03
CADFEM GmbH 04
CG TEC GmbH 05
Cluster New Materials 06
COIA – Composites In Action – GmbH 07
CoTexx GmbH 08
Dr. Günther Kast GmbH & Co. KG 09
EMCC DR. RAŠEK 10
Enterprise Europe Network in Bayern 11
Gummiwerk KRAIBURG GmbH & Co. KG 12
HBW-Gubesch Thermoforming GmbH 13
KARL MAYER LIBA Maschinenfabrik GmbH 14
Munich Composites GmbH 15
Schaumform GmbH 16
Siltex Flecht- und Isoliertechnologie Holzmüller GmbH & Co. KG 17
Trevira GmbH 18
University of Bayreuth – Polymer Engineering 19
Joint Stand Innovations from Bavaria Hall 7.3 Stand M31
03
Bayern Innovativ GmbHGewerbemuseumsplatz 2 | 90403 Nuremberg Germany
Tel.: +49 911-20671-0 Fax: +49 911-20671-792
[email protected] www.bayern-innovativ.de
Bayern Innovativ GmbH
Most innovations originate where expertise from various disciplines comes together. Bayern Innovativ GmbH, foun- ded in 1995 at the initiative of the Bavarian state govern- ment, capitalizes on this phenomenon and connects potential cooperation partners from different industries and technologies in order to drive innovations in small- and medium-sized enterprises (SME) in particular. Bayern Innovativ brings together experts from industry and science at all levels of the value chain and offers customised services to help them close existing gaps in technologies, supply chains and sales channels.
The networks of Bayern Innovativ GmbH presently com- prise some 80,000 experts from 40,000 companies and research institutes and 80 partner network organisations. The activities centre on digitalisation, energy, health, material and mobility – five focal areas with significant future potential.
CADFEM GmbHMarktplatz 2 | 85567 Grafing Germany
Contact: Timo Frambach
Tel.: +49 8092-7005-0 Fax: +49 8092-7005-77
[email protected] www.cadfem.de/composites
CADFEM – because simulation is more than just software
CADFEM is a system vendor, engineering services pro- vider as well as a training and information provider all rolled into one. A one-stop source of everything customers need for a successful simulation. Software from ANSYS, complementary CAE-tools, and IT solutions. Support, advice, engineering. Plus state-of-the-art know-how.
ANSYS® Composite PrepPost™
ANSYS Composite PrepPost is a powerful ANSYS and ANSYS® Workbench™ integrated software package designed for efficient composites engineering. ANSYS Composite PrepPost integrates leading composite-specific technology, state-of-the-art pre- and postprocessing and simulation capabilities of ANSYS.
▪ Unique Material Definition Functionality
▪ Oriented Element-Set Concept
▪ Shell and Solid-Based Modeling
▪ Draping and Flat-Wrap Functionality
▪ Unique Composite Failure Analysis Capabilitites
▪ Ply-Book Generation
05
CG TEC GmbHGewerbepark Hügelmühle 41 | 91174 Spalt Germany
Tel.: +49 9175-90807-0 Fax: +49 9175-90807-20
[email protected] www.cg-tec.de; www.carbonscout.com
CG TEC is producer of tubes, rods and plates made out of compositematerials like CFRP, GFRP and basaltfiber reinforced plastic.
On our 8 pultrusion-lines we produce rods, bars and tubes in a continuous process for confection and further treatment.
In the prepreg technology we produce tubes and plates. It’s the aim of our R&D department to develop, in close collaboration with our customers, new products from prototype to serial production. There for we’ll focus on the production of complete assembly groups with composite connectors.
CG Tec is able to produce different technical components for a wide range of applications from small to large scale serial production for a huge variety of applications, "made in Germany" at the production site at Spalt. We participate at the premium Cluster Mai-Carbon located in the southern region of Bavaria.
Cluster New MaterialsGewerbemuseumsplatz 2 | 90403 Nuremberg Germany
Contact: Dr. Marcus Rauch
Tel.: +49 911-20671-243 Fax: +49 911-20671-766
[email protected] www.cluster-neuewerkstoffe.de
Cluster New Materials
The Cluster New Materials is the Bavaria-wide platform for information, communication and technology in new materials. The cluster managed by Bayern Innovativ GmbH aims to promote technology transfer across materials and industries and to identify technology tasks based on demand. These tasks are promoted by means of pro- active network activities. The cluster also contributes actively to initiating technology-oriented joint projects to create value on a regional level.
The cluster focuses its activities on seven fields, including metallic lightweight construction materials, fibre com- posites, plastics and glass. Cluster meetings on specific subjects are organised at companies and institutes bring- ing together experts and potential customers. Cluster circles and expert panels regularly meet to discuss special issues, thus concentrating topics down to the project level and supporting partners in their market-oriented project work. The Cluster New Materials comprises about 400 companies and research institutes.
07
UV-Technology for LPG Composite Cylinders – a high-speed, cost-effective and eco-friendly solution
LPG Composite Cylinder (Type IV) Production
COIA has successfully implemented UV-Technology into the LPG composite cylinder manufacturing process. We offer turn key solutions with own patent p. Filament Winding Machinery, UV-equipment & UV-resins.
International Test Standards Compliance
ISO 11119-3, DIN EN 12245, DIN EN 14427, etc.
Burst test @ 74 bar after 12,000 cycles (3 bar – 30 bar)
COIA – Composites In Action – GmbH Hasenhägweg 73 | 63741 Aschaffenburg Germany
Contact: Mahdi Shubbar
Tel.: +49 6021-3487-0 Fax: +49 6021-3487-17
[email protected] www.coia.de
CoTexx® Knitted Heating Fabric made of stranded copper wire is a semi finished product for manufacturing of elec- trical panel heaters, e.g. in tools for the production of fibre-reinforced composites. Characteristics are an ex- tremely homogenous, water-quench like distribution of heat, rapid responding behaviour and unbeatable eco- nomic efficiency. Its implementation is not limited to thermo setting resins as matrix because the heating fabric is suitable for combination with other materials like elastomer (e.g. silicone) or thermoplastics (e.g. PE). If demanded CoTexx GmbH consults you on usage and application plus provides the appropriate control units and software.
CoTexx GmbH is specialised in industrial research, develop-ment and production of high-tech products, which utilize the natural biocidal and antiseptic properties of non- ferrous and precious metals. Due to the necessity to pro-duce the developed products at marketable prices, a production line of knitted technical textiles was set up. As a result of its innovative capabilities it is also avail-able for other industrial sectors.
CoTexx GmbHJohannesstr. 27 | 86565 Gachenbach Germany
Contact: Thilo Langer
Tel.: +49 8259-8287-81 Fax: +49 8259-8287-83
[email protected] www.cotexx.com
09
Dr. Günther Kast GmbH & Co. KGAbt-Reubi-Str. 6 | 87527 Sonthofen Germany
Contact: Nicole Effendy
Tel.: +49 8321-6641-0 Fax: +49 8321-6641-66
[email protected] www.kast.de
Dr. Günther Kast GmbH & Co. KG, Sonthofen / Germany
▪ Production of technical fabrics from glass, carbon, aramid and other yarns
▪ Experience in many industrial applications for decades, worldwide
▪ Large range of fabrics, finishes, coatings and textile solutions
▪ Customer-focused developments
▪ Our main business competences are in: ▪ Building Industry: - ETICS / Plaster reinforcement - Dry mortarless construction - Concrete & Screed - Building Chemistry & Painting
▪ Heat Protection and Thermal Insulation ▪ Composites ▪ Geotextiles ▪ Textile Architecture – non-combustible glass fabrics ▪ Earth quake protection systems ▪ Industrial applications
Competence in textile – flexible and reliable
EMCC DR. RAŠEKBoelwiese 8 | 91320 Ebermannstadt Germany
Contact: Nathalia A. Rašek-Abach
Tel.: +49 9194-9016 Fax: +49 9194-8125
[email protected] www.emcc.de
Quality in EMC and Environment
All three EMCC Companies have attained global importance: EMCCert: Expert office up to Certification Institute EMCCons: Consulting, R & D, Test Laboratories, Seminars EMCComp: Selling of test instruments up to planning of test laboratories.
Activities
▪ International certification, approvals. Expertises for private, industry, insurance companies and courts. CAB/TCB for Canada, Japan, USA since 1977. ▪ R&D: HPM, HIRF, LEMP, NEMP simulators. ▪ ITE: IT Equipment, Telecommunications, EDP. ▪ ISM & Vehicles: industrial, scientific, medical products as well as vehicles. ▪ RFE: Radio Frequency Engineering. ▪ Toys: model prototypes up to the TRANSRAPID train. ▪ EMP: Electro-Magnetic Pulse. Lightning stroke, effects of nuclear blast up to radar simulation. Ships, aircraft, spacecraft, satellites. ▪ CAL: Calibration, antenna calibration. ▪ ENV: Environment, safety.
Accreditations, approvals, notifications
▪ A2LA, EAL/DAR/DAkkS, KBA/AEMCLAP, EBA ▪ BNetzA (RegTP), CE "Notified Body" EMC and R&TTE ▪ CAB, TCB (FCC USA and IC Canada), MRA (Australia, Canada, Japan, USA), ACA, FCC to VCCI
11
Enterprise Europe Network in BayernGewerbemuseumsplatz 2 | 90403 Nuremberg Germany
Contact: Dr. Uwe Schuessler
Tel.: +49 911-20671-310 Fax: +49 911-20671-722
[email protected] www.een-bayern-innovativ.de
Enterprise Europe Network in Bavaria Bayern Innovativ GmbH
With more than 600 organisations across all 28 European member states and more than 20 additional partner countries, the Enterprise Europe Network (EEN) is the largest business and technology network for small- and medium-sized enterprises (SME) in Europe.
Bayern Innovativ GmbH is one of these EEN partner organisations, located in Nuremberg, Bavaria, in the south of Germany. With its business unit "International Innovation Networks" it supports Bavarian companies and research organisations in three major areas:
1. the commercialisation of their technologies abroad through international innovation projects
2. the identification and acquisition of new technologies from abroad for product- and process innovations
3. the advancement of their technology portfolio through international R&D cooperation as basis for future innovations
The service comprises strategic analysis, the compilation of specific technology offers and requests, technology search and monitoring as well as the active identification and establishment of contacts to experts abroad.
KRAIBON® Rubber improves composites
Gummiwerk KRAIBURG developed KRAIBON®, a new generation of rubber compounds for direct bonding between rubber and FRPs. ▪ Direct bonding without any adhesives and in the same process step
▪ Can be processed with autoclave, press and resin infusion processes
KEY – Applications: ▪ ACOUSTICS: extraordinarily good damping properties, causing little additional weight ▪ IMPACT: significantly improved impact properties (approx. 4-5 times enhancement) ▪ SPLINTERING: remarkably better splintering-behavior of FRP parts
red line: CFRP-plate without rubberblue line: CFRP-plate with rubber
tests by 117Hz tests by 415Hz
tests by 4186Hztests by 622Hz
Gummiwerk KRAIBURG GmbH & Co. KGTeplitzer Str. 20 | 84478 Waldkraiburg Germany
Contact: Norbert John
Tel.: +49 8638-61-493 Fax: +49 8638-61-535
[email protected] www.kraibon.com
13
The HBW-Gubesch Group is positioned as a solution specialist and module development partner on the base of innovative thermoforming and injection molding tech- nologies, which are integrated in OneShot-Processes to realize efficient light weight solutions for large scale app- lications. Our interdisciplinary development expertise and the wide spectrum of manufacturing and processing technologies enable us to manufacture products and modules with high functional integration. Those represent a real benefit for our customers in automotive and non-automotive industries:
▪ highly weight-reduced components and structures of thermoformed Advanced Composites for serial applications
▪ foil decoration technologies (Insert Molding, IMD, IMD-Pro, IMD Multi-K, MultiDecoMolding)
▪ surface preparation technologies (painting, PVD, hot stamping, tampon print)
▪ full scale developmental and engineering services including process and component simulation
▪ rapid prototyping (SLS, STL, FDM, 3D printing)
HBW-Gubesch Thermoforming GmbHIndustriestr. 1 | 91489 Wilhelmsdorf Germany
Contact: Jens Klug
Tel.: +49 9104-8270-0 Fax: +49 9104-8270-115
[email protected] www.hbw-gubesch.de
KARL MAYER LIBA Maschinenfabrik GmbHOberklingensporn | 95119 Naila Germany
Tel.: +49 9282-67-0 Fax: +49 9282-5737
[email protected] www.liba.de
We offer a wide range of
HIGH PERFORMANCE – TEXTILE MACHINE TECHNOLOGY FOR REINFORCEMENT STRUCTURES
UD 700 Carbon fiber spreading machine for the production of unidirectional carbon tapes
MAX 5 Multiaxial weft insertion machine for the production of multi-layer carbon fiber structures based on spread tapes
MAX 4 Multiaxial weft insertion machine for the production of multi-layer glass fiber structures
HSD-ST weft insertion machine for the production of mono- and biaxial structures
RACOP warp knitting machine for the production of net-shape structures
RACOP V warp knitting machine for the production of reinforced non-woven structures
DG double-needle bar warp knitting machine for the production of 3-D spacer structures
15
Munich Composites GmbHWilly-Messerschmitt-Str. 1 | 85521 Ottobrunn Germany
Contact: Martin Stoppel
Tel.: +49 89-890555-00 Fax: +49 89-890555-019
[email protected] www.munich-composites.de
Munich Composites GmbH is a company for build-to-order carbon fiber composite components. It offers all steps in the value chain from design to production of large series of braided hollow parts with its patented "BRAIDform" production process.
Braiding allows for high volume production of hollow CFRP components in superior quality. We have completely auto- mated the fiber lay up – every fiber has the ideal angel even in complex shapes. Our innovations, including a directly reusable core system and the collaboration of several robots, speed up the cycle time and result in lower costs for our customers.
Parts in large quantities and complex geometries can be produced at a significantly lower cost with this technology. We can guarantee that every component has the exact same high quality. Furthermore we offer a manufacturing technique suitable for high manufacturing quantities re- quired in different industries.
Schaumform GmbHHochleiten 1 | 94116 Hutthurm Germany
Contact: Andreas Brunner
Tel.: +49 8505-919982-0 Fax: +49 8505-919982-18
[email protected] www.schaumform.com
Engineering Services – Foam Injection Molding Prototypes – Foaming Molds – Laboratory
Schaumform GmbH provides highly specialized support for customers that are interested in up-to-date methods for lightweight production.
The focus of the work is on the production of large volume goods that show superior lightweight performances.
With the processing approaches of Schaumform the manu- facturing of lightweight parts in one-minute-cycles is achieved.Commonly, thermoplastic systems are used and processing methods derived from injection molding are employed.
The services of Schaumform start from lightweight design and lead to technical calculations and FEM. Then, the necessary pre-investigations are conducted by using test molds and machinery.
After technical feasibility studies prototype molds are construed by Schaumform and the production of the parts can commence in Schaumform’s laboratory which is, inter alia, equipped with 3 foam injection molding machines.
17
Since 1956 SILTEX stands with its braids (sleeves, tapes and cords) for excellent technical achievements, innovation, reliability, quality and internationalism.
SILTEX’s high flexibility, combined with most modern materials – like Carbon, Aramide, Glass, Polyamide, … – and large capacity enables to develop individual braids coordinated with its customers. Also customizing of al- ready existing products or completely new design can be realized within a short time. Dimensions from 0.2 mm up to 500 mm in width or diameter is the range.
Meeting international standards and guidelines for safety and environment as well as technical specifications is compulsory for us (ISO 9001 for example).
Engineering Your Success
Siltex Flecht- und Isoliertechnologie Holzmüller GmbH & Co. KGPalmstr. 27 | 84387 Julbach Germany
Tel.: +49 8571-92297-0 Fax: +49 8571-92297-22
[email protected] www.siltex.de
Trevira GmbHMax-Fischer-Str. 11 | 86399 Bobingen Germany
Contact: Gerhard Klis
Tel.: +49 8234-9688-2222 Fax: +49 8234-9688-5342
[email protected] www.trevira.com
Trevira GmbH manufactures specialty polyester filament yarns for functional textiles and technical applications, for example composites. A vast range of flat and textured filament yarns, including hybrid versions with a low-melt component, suits a lot of specific technical end uses.
Further specialties are staple fibres based on several polymers (for example PET / PLA / IngeoTM) which are produced in several technologies like bi-component.
Trevira is also globally renowned for inherently flame retardant fibres and filament yarns for furnishing materials (Trevira CS).
19
Our brand "Polymer Engineering" stands for scientific and practical research and teaching in the field of polymer materials. The Department of Polymer Engineering at the University of Bayreuth, the business area of plastics at New Materials Bayreuth GmbH and the Department of Polymer Engineering at TuTech Innovation GmbH in Hamburg embody this brand under the guidance of Prof. Dr.-Ing. Volker Altstädt.
The main research at all three locations lies on the ma- terial, the construction and the production, with the aim to develop high performance plastic products. The focus of the research is the systematic analysis and use of causal relationships between processing, structure and properties of polymer materials. This allows a strategic approach to the development of innovative products.
Our group combines physical and chemical fundamental knowledge to bring innovative smart materials into real world applications. A number of modern industry-relevant manufacturing methods are available. The characteriza-tion of the large spectrum of properties belongs to our daily work. By building a bridge between pure science and industrial needs, our group is proud to be a reliable collaborator on the development of the new generation of composite materials with our industrial partners.
University of Bayreuth Polymer Engineering Prof. Dr.-Ing. Volker Altstädt
Universitätsstr. 30 FAN A | 95447 Bayreuth Germany
Tel.: +49 921-55-7471 Fax: +49 921-55-7473
[email protected] www.polymer-engineering.de
co
ncep
t an
d d
esig
n: e
rcas
die
agen
tur.d
e
Today's knowledge for tomorrow's innovation
Bayern Innovativ GmbHGewerbemuseumsplatz 290403 NurembergGermany
Tel.: +49 [email protected]
www.bayern-innovativ.de/messen
... encountering the future.