idol plasto pvt. ltd., rajkot, upvc plumbing pipes fittings

10
moving forward with times Rajkot-Ahmedabad N.H. 8-B, Wankaner Chowkadi, Survey No. 552, Opp. Kuvadva High School, Dist.: Rajkot, Kuvadva - 360023 (Gujarat) INDIA. Ph : +91 281 2784077 Cell : +91 8980 700 100 E-mail : [email protected] Web : www.idolpipe.com | www.columnpipe.in www.hdpepipeindia.com

Upload: indiamart-intermesh-limited

Post on 29-Jul-2015

693 views

Category:

Documents


17 download

TRANSCRIPT

Page 1: Idol Plasto Pvt. Ltd., Rajkot, UPVC Plumbing Pipes Fittings

moving forwardwith times

Rajkot-Ahmedabad N.H. 8-B, Wankaner Chowkadi,Survey No. 552, Opp. Kuvadva High School, Dist.: Rajkot,Kuvadva - 360023 (Gujarat) INDIA.

Ph : +91 281 2784077Cell : +91 8980 700 100

E-mail : [email protected] : www.idolpipe.com | www.columnpipe.in www.hdpepipeindia.com

Page 2: Idol Plasto Pvt. Ltd., Rajkot, UPVC Plumbing Pipes Fittings

01 02

About us

Leveraging on the rich industry experience, IDOL Plasto Private Limited is recognized as a

trustworthy manufacturer and exporter of Pipes and Fi�ings. These are Manufactured by a team

of experts using high quality imported raw materials.

Company is equipped with modernized technology for production to maintain international

standards. Fully modernized laboratory is provided for rigorous testing and accuracy of products.

Our products are acknowledged for their sturdiness, reliability, dimensional accuracy and resistance

to rust. 24x7 the team of professionals works for maintaining quality and consistency of products

for domestic as well as global market.

Large premises helps us to grow by leaps and bounds. Satisfaction of our customers is our key

factor. Due to the premium quality products, we have established ourselves as one of the leading

organization in the piping and plastic industry.

Government Supply. Drip Supply. Overseas Clients.

Agriculture & Irrigation. Commercial Market. Construction.

Plumbing Industry. Drainage. Borewell and Casing.

We Have Our Clients in Di�erent Fields Like

Group Company

PLASTIC INDUSTRIES

Products must be installed and cared for in line with our fi�ing instructions. All technical details provided inside the catalogue are solely for informative purpose only. No claims shall be entertained for the same. The company shall not be held responsible for any loss, damage caused. The technical details are subjective to change without prior information.

Page 3: Idol Plasto Pvt. Ltd., Rajkot, UPVC Plumbing Pipes Fittings

03 04

Infrastructure

Core PurposeTo satisfy demanding needs of customers and

build a relationship through exceptional experience.

Vision and MissionTo be a GLOBAL LEADER IN THE FIELD

OF PIPES and become a 300 crore

company by 2025.

Core ValuesQuality

Team Work

Innovation

Customer Satisfaction

Self Improvement

Machine Shop Laboratory

Threading CNC Shop

Index

PVC Pressure Pipe

09 - 12

Submersible Column Pipe

05 - 08

uPVC Plumbing Pipe

13 - 14

Sprinkler Irrigation System

17 - 18

HDPE Pipe

15 - 16

Our Credential

ISO 9001

An ISO 9001:2008 87-304-1820ISI-3953981 Import and Export

Certified Company

Page 4: Idol Plasto Pvt. Ltd., Rajkot, UPVC Plumbing Pipes Fittings

Application

Water rising from submersible and jet pump for irrigation, domestic, industrial mining.

A perfect replacement forMS, GI, and SS pipes.

Suitable for salty, sandy and chemically aggressive water.

SUBMERSIBLECOLUMN

PIPE

05 06

Salient Features of Column / Drop / Riser Pipes

Long lifeLight in weight & easy to transport.Easy and low installation cost since no need of threading tools or solvent cement for fitment.Cost saverPower saver10 to 30% extra waterNo electrolytic depositionNo rusting or corrosionHigh impact resistance

Comparison Chart

Material Property Requirement For Column Pipes

Mild Steel Or Galvanized Steel Pipes uPVC Column Pipes

uPVC Column Pipes do not reactwith acidic or alkaline water and have a long life in the bore wells.

Steel pipes are prone to rust,corrosion & ultimately get damaged

and need to replace quickly.Long life

Pipes are light in weight and are easyto handle, install and remove.

Pipes are heavy and a great e�ort is required for installation or maintenance.

Difficult to handle.Light weight

Internal surface is smooth,therefore low head loss due to friction and

results in higher discharge of water.

Rough internal surface and head loss is high resulting in less discharge of water.

Smooth internal surface

Rubber rings are provided with the threads at every joint ensuring

100% leak proof

Steel pipes are prone to rust,corrosion & ultimately get damaged

and need to replace quickly.Leak proof joints

Specially designed square thread, which do not corrode

rust or deteriorate.

"Threads are prone to rust and corrosion easily."Strong threaded joints

Advantages of Column / Drop / Riser Pipes

Manufacturing Process : uses latest extrusion technology, standard quality control procedures and has fully equipped laboratory ensuring the best quality of pipes with perfect dimensional accuracy. uses CNC machines for threading of pipes and couplers with high accuracy tools to ensure the exact dimensions thereby resulting in easy and comfortable fitment of pipes.

Special Formulation : pipes are made with specially designed formulation, so that the pipes are capable of handling both internal hydro-staticpressure as well as vertical tensile load due to the water column and pump weight.This special formulation also ensures that the threads do not get bri�le and break even a�er loosening and tightening several times during the life span.

Thick & Thin :This innovative technique is for making pipes thicker in the threading end to compensate for material removal due to threads.Therefore saves raw material consumption and at the same time provides much higher strength to the pipes.

Square Threads :Unique square threads made on CNC machines provide sufficient grip and additional strength against tensile load.Thus the joint becomes fairly strong with sufficient factor of safety to take care of load of entire assembly with pump weight.These specially designed threads also make it suitable for easy fitment.All threads are checked thoroughly with fitment gauges to ensure 100% accuracy.

Rubber Ring :Specially designed "O" rings and “BELT” rings are provided on pipe threads to make the joints watertight, absorb pump vibrations, avoid leakage and over tightening.

Molecular Orientation :At we have developed unique Molecular Orientation Technique during pipe extrusion, which gives higher impact strength to the pipes.

Page 5: Idol Plasto Pvt. Ltd., Rajkot, UPVC Plumbing Pipes Fittings

Technical Chart of Column Pipes

Nominal Diameter

(inch)

Duty

ECO

MEDIUM

STANDARD

ECO

MEDIUM

STANDARD

HEAVY

ECO

MEDIUM

STANDARD

HEAVY

ECO

MEDIUM DELUX

MEDIUM

MEDIUM PLUS

STANDARD

STANDARD PLUS

HEAVY

SUPER HEAVY

MEDIUM

STANDARD

HEAVY

SUPER HEAVY

MEDIUM

STANDARD

HEAVY

MEDIUM

STANDARD

HEAVY

3050

3070

3070

3050

3070

3070

3070

3050

3070

3070

3070

3070

3090

3090

3090

3090

3090

3090

3090

3090

3090

3090

3110

3080

3080

3080

3100

3100

3100

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

200

900

1300

1950

1350

1850

2600

3100

1750

2100

3050

4100

2150

2550

2950

3150

3850

5050

5050

5650

3650

5350

7050

9050

5150

7250

9750

7550

10550

16050

550

750

1150

800

1150

1550

1850

1050

1300

1750

2475

1100

1350

1600

1900

2150

2650

3250

3550

2050

2950

4250

5450

3050

4250

6450

4250

6050

9750

13

16

30

13

15

26

35

13

15

26

35

9

11

13

17

21

24

27

35

10

16

26

35

11

17

26

10

15

26

130

160

300

130

150

260

350

130

150

260

350

90

110

130

170

210

240

270

350

100

160

260

350

10

170

260

100

150

260

30

30

30

25

25

25

25

20

20

20

20

15

15

15

15

15

15

10

10

10

10

10

10

5

5

5

5

5

5

Average Outer

Diameter (mm)

Nominal E�ective Length (mm)

ThickPortion ofBoth Side

(mm)

UltimateBreaking

Load (kgf)

Safe PullingLoad with

Chain Pulley(kgf)

Safe AllowableHydrostatic

Pressure(kg/cm2)

Safe Total Pump

Delivery Head (mt.)

PackingDetails

Colour CodeAs Per Duty

ORANGE

ORANGE

RED

ORANGE

ORANGE

RED

BLUE

ORANGE

ORANGE

RED

BLUE

ORANGE

ORANGE

ORANGE

ORANGE

RED

RED

BLUE

BLUE

ORANGE

RED

BLUE

BLUE

ORANGE

RED

BLUE

ORANGE

RED

BLUE

Handling of Pipes

On receiving pipes please check and inspect for any form of transport damage due to shi� inload or improper handling.

Visually examine the ends of pipes for any cracksor damage.

Do not throw or drop the pipes on the floor.

Do not drag or push the pipes from the truck bed.

Contact of pipes from any sharp object should betotally avoided.

Storage of Pipes

Pipes should preferably be stored indoors. When this isnot possible please ensure that the bundles are coveredto prevent exposure to sunlight, and to reduce the e�ect of U.V. rays.

Maximum stacking height of pipes should be 7 feet.

Place alternate layers of pipes at an angle of90 degrees / perpendicular to each other,with the first layer in a square shape.

The pipes are stored on level ground free of anysharp objects.

If pipes of same diameter but di�erent classes are being stacked together, place the thicker pipes below,i.e. stack heavy pipes below standard pipes.

The surface should be dry.

1" 33.00± 0.50

42.00 ± 0.50

48.00 ± 0.50

60.00 ± 0.50

75.00 ± 0.50

88.00 ± 0.50

113.00 ± 0.50

1.1/4"

1.1/2"

2"

2.1/2"

3"

4"

Installation Procedure

Accessories

07 08

Pump Guard Set Sigri (Pipe li�ing) Spanner (Pipe tightening)

Clean Threads withWater before Joining

Hold Coupler beforeLoosening or Tighteningof Pipes

Fix Bo�om Adaptorwith Pump

Ensure Pump Guardis Installed Properly

The Ultimate Test: We tested the strength of our pipes against two powerful tractors and the pipe emerged as the Winner!

Lower Column Pipeswith Chain Pulley

Page 6: Idol Plasto Pvt. Ltd., Rajkot, UPVC Plumbing Pipes Fittings

PVCPRESSURE

PIPE

09 10

Selfit PVC-u Pipes for Agriculture & Potable Water Supply

The selfit (solvent cement joint) pipes have one end self-socketed and the other end plain, which fits snugly without the use ofcouplers. The strong solvent cement joint is permanent and trouble-free.

Advantages

Selfit sockets are formed with high precision on specially developed machines.

50% saving in installation time, as comparedwith plain ended pipes and loose couplers.

The number of joints are reduced by 50%,resulting in substantial saving in labor costs.

The requirement of solvent cement for a pipeline is reduced by almost 50%.

Eliminates the inconvenience of loose couplers,& reduction in inventory costs.

Selfit pipes are supplied in a standard length of 6 mtrs exclusive of the socket portion.

(As Per IS : 4985 – 2000)

Combination of air and water is very dangerous for pvc pipes.

Air being compressible in nature, tends to accumulatein the pipeline and in case of non-functioning of air valvesit resuts in high localized pressure.

To avoid this phenomenon, good quality air valves should be installed at all peak points in the pipeline with a distanceof 300 to 400 meters between them.

Air valves are of two types : single acting and double acting.

It is recommended that the size of theair valve be about 1/4th the diameter of pipe for the admission as well as release of air.

The function of an air valve is the same as that of a nose in a human body.

Air Valve Selection and Installation

2025324050637590110140160180200225250

1/23/4

11.1/41.1/2

22.1/2

345678910

350300250200150125103795436272115129

Outside Dia. of Pipe (mm)

Outside Dia.of Pipe (Inch)

Approx. no of Joints/ kg. of

Solvent Cement

Requirement of PVC-u Adhesive for Jointing Color Coding as per IS:4985

Class of PipePressure Class

(kg/cm2)

Class 1Class 2Class 3Class 4Class 5Class 6

Plumbing Pipes

2.546810

12.515

Color Code

10864

2.5

Selection of Pressure Class

Total Head (Meters) Pressure Class (kg/cm2)

80-10060-8040-6025-4000-25

10864

2.5

RedBlue

GreenBrownYellowBlackPink

Page 7: Idol Plasto Pvt. Ltd., Rajkot, UPVC Plumbing Pipes Fittings

Technical Chart of IDOL PVC-u Pipe for Agriculture Portable Water Supply (IS:4985-2000)

NorminalOutside

Diameter(Nominal

Size)

MeanOutside

Diameter

Min Max

OutsideDiameter

at any point

Min Max Avg.Max

Min Max

Class 10.25

Avg.Max

Min Max

Class 20.40

Avg.Max

Min Max

Class 30.60

Avg.Max

Min Max

Class 40.80

Avg.

ma

Min Max

Class 51.00

Avg.Max

Min Max

Class 61.25

Working pressure, mpa

(1)

20

25

32

40

50

63

75

90

110

125

140

160

180

200

225

250

280

315

355

400

450

500

560

630

(2)

20.0

25.0

32.0

40.0

50.0

63.0

75.0

90.0

110.0

125.0

140.0

160.0

180.0

200.0

225.0

250.0

280.0

315.0

355.0

400.0

450.0

500.0

560.0

630.0

(3)

20.3

25.0

32.3

40.3

50.3

63.3

75.3

90.3

110.4

125.4

140.5

160.5

180.6

200.6

225.7

250.8

280.9

316.0

356.1

401.2

451.4

501.5

561.7

631.9

(4)

19.5

24.5

31.5

39.5

49.4

62.2

74.1

88.9

108.6

123.5

138.3

158.0

177.8

197.6

222.3

247.0

276.6

311.2

350.7

395.2

444.6

494.0

553.8

637.6

(5)

20.5

25.5

32.5

40.5

50.6

63.8

75.9

91.1

111.4

126.5

141.7

162.0

182.2

202.4

227.7

253.0

283.4

318.8

359.2

404.8

455.4

506.0

566.8

637.6

(6)

1.7

2.0

2.2

2.4

2.8

3.1

3.4

3.9

4.2

4.8

5.3

5.9

6.6

7.4

8.2

9.2

10.3

(7)

1.3

1.6

1.8

2.0

2.3

2.6

2.9

3.3

3.6

4.1

4.6

5.1

5.8

6.5

7.2

8.1

9.1

(8)

1.7

2.0

2.2

2.4

2.8

3.1

3.4

3.9

4.2

4.8

5.3

5.9

6.7

7.5

8.3

9.4

10.5

(9)

1.9

2.2

2.3

3.0

3.4

3.8

4.3

4.9

5.3

6.0

6.5

7.3

8.2

9.2

10.3

11.6

12.8

14.3

16.1

(10)

1.5

1.8

2.1

2.5

2.9

3.2

3.7

4.2

4.6

5.2

5.7

6.4

7.2

8.1

9.1

10.3

11.4

12.8

14.4

(11)

1.9

2.0

2.6

3.0

3.4

3.8

4.3

4.9

5.3

6.0

6.5

7.4

8.3

9.4

10.5

11.9

13.2

14.8

16.6

(12)

1.8

2.1

3.7

3.1

3.7

4.3

5.0

5.5

6.3

7.0

7.7

8.6

9.6

10.7

12.0

13.4

15.1

17.0

18.8

21.0

23.7

(13)

1.4

1.7

2.2

2.6

3.1

3.7

4.3

4.8

5.4

6.4

6.8

7.6

8.5

9.5

10.7

12.0

13.5

15.2

16.9

18.9

21.3

(14)

1.8

2.1

2.7

3.1

3.7

4.3

5.0

5.5

6.2

7.1

7.9

8.8

9.8

11.0

12.4

13.8

15.6

17.5

19.5

21.8

24.5

(15)

1.6

1.9

2.2

2.8

3.3

4.0

4.6

5.6

6.4

7.2

8.2

9.2

10.0

11.2

12.4

14.0

15.6

17.6

19.8

22.2

24.8

27.6

31.0

(16)

1.2

1.5

1.8

2.3

2.8

3.4

4.0

4.9

5.6

6.3

7.2

8.0

8.9

10.0

11.0

12.5

14.0

15.8

17.8

20.0

22.3

24.9

28.0

(17)

1.6

1.9

2.2

2.8

3.3

4.0

4.6

5.6

6.4

7.3

8.3

9.2

10.3

11.5

12.9

14.4

16.1

18.2

20.5

23.0

25.7

28.7

32.2

(18)

1.5

1.8

2.2

2.7

3.3

4.1

4.9

5.7

7.0

7.8

8.7

9.9

11.1

12.3

13.9

15.4

17.2

19.3

21.8

24.4

27.5

30.5

34.1

38.4

(19)

1.1

1.4

1.8

2.2

2.8

3.5

4.2

5.0

6.1

6.9

7.7

8.8

9.9

11.0

12.4

13.8

15.4

17.3

19.6

22.0

24.8

27.5

30.8

34.7

(20)

1.5

1.8

2.2

2.7

3.3

4.1

4.9

5.7

7.1

8.0

8.9

10.2

11.4

12.7

14.3

15.9

17.8

19.9

22.6

25.3

28.6

31.7

35.5

40.0

(21)

1.8

2.1

2.7

3.3

4.0

5.0

5.9

7.0

8.5

9.6

10.7

12.2

13.7

15.2

17.1

18.9

21.1

23.8

26.8

30.2

33.8

37.5

42.0

47.2

(22)

1.4

1.7

2.2

2.8

3.4

4.3

5.1

6.1

7.5

8.5

9.5

10.9

12.2

13.6

15.3

17.0

19.0

21.4

24.1

27.2

30.5

33.9

38.0

42.7

(23)

1.8

2.1

2.7

3.3

4.0

5.0

5.9

7.1

8.7

9.8

11.0

12.6

14.1

15.7

17.6

19.6

21.9

24.7

27.8

31.3

35.1

39.0

43.7

49.2

Handling and Storage

PVC-u pipes should be handled with due care to avoiddamage to the surface and to the ends of the pipe.

Dragging pipes along the ground should be strictly avoided.

PVC-u pipes should be loaded and unloadedby hand. Li�ing chains and hooks should beused carefully.

PVC-u pipes should be gently lowered ontothe ground and stored on flat level groundfree of sharp stones or objects.

Each layer of pipe must have the socketsprotruding and alternate layers must havesocket end and plain ends as shown in figure, to ensure that the pipes are supportedthroughout the length.

Extra care must be taken to see that sockets ofthe bo�om layer do not carry any load.

This can be ensured by use of suitable wooden planks or blocks.

max

.15

0mm

PVC-u pipes should always be stored in shade and away from direct sunlight.

11 12

Finalfillingmaterial

min300mmCover

Pipeline zone

min. 100 to150mm(Bedding)

The width of the trench should be as narrow as possible, allowing enough room for joining,backfilling, etc.

A trench width of 350 to 400 mm over the outsidediameter of the pipe is found quite adequate.

Depth of the trench plays an important part in agood pipeline, and ideally it should be 1 meter above the top of the pipe.

The trench should be provided with a properbedding layer, which should be free of stones andother such objects.

Proper and careful bedding of the pipeline will ensure a long service life of the entire system.

Trench Preparation

Page 8: Idol Plasto Pvt. Ltd., Rajkot, UPVC Plumbing Pipes Fittings

uPVCPLUMBING

PIPE

Salient Features

Strong and Light Weight.

Easy to Install.

Fire Resistant.

Resistant to Corrosion.

Simple and Leak Proof Joints.

Maximum Flow Rate.

Good Thermal and Electrical Insulation.

Chemically Inert.

Safe for Pure and Hyginic Water Supply.

Special Coloured Line Marking to Identify Right Product.

Size (1/2") Inch to (3") Inch (Available in 40 Schedule and 80 Schedule).

Application

Cold Water Plumbing Application.

Water Distribution Mains.

Swimming Pools.

Plants and Tanning Plants.

Salt Water Line.

Industrial Process Lines.

Hand Pumps.

Down Take Lines.

Sugar, Paper and Distillery Industries.

Dimension and Technical Details of ASTM Heavy PressureuPVC Pipe at 23°C As Per ASTM D- 1785

13 14

uPVC Plumbing Pipe

Solvent Cement Plumbing Pipes are Manufactured as per ASTM D-1785

Outside Diameter Packing DetailsSchedule - 40 Schedule - 80

InchMin. Max.

Wall Thickness (mm) Pressure Rating(MPA) Min. Max.

Wall Thickness (mm) Pressure Rating(MPA)

½"

¾"

1"

1 ¼"

1 ½"

2"

2 ½"

3"

21.34

26.67

33.40

42.16

48.26

60.32

73.02

88.90

2.77

2.87

3.38

3.56

3.68

3.91

5.16

5.49

3.28

3.38

3.89

4.00

4.19

4.42

5.77

6.15

4.14

3.31

3.10

2.55

2.28

1.93

2.07

1.82

3.73

3.91

4.55

4.85

5.08

5.54

7.01

7.62

4.24

4.42

5.08

5.43

5.69

6.20

7.85

8.53

5.86

4.76

4.34

3.59

3.24

2.76

2.90

2.60

50

40

30

15

15

10

05

05

mm 3 Mtr. 6 Mtr.

25

20

15

10

10

05

05

03

Page 9: Idol Plasto Pvt. Ltd., Rajkot, UPVC Plumbing Pipes Fittings

HDPEPIPE

Advantages

Light in Weight and Easy to Carry as Compared toGI & MS Pipes.

Low Transportation and Installation Cost.

Available in Suitable Coils from 50 Meter to 500 Meteras Well as in Straight Lengths of 6 Meter.

Non-corrosive.

Transfer of Heat is Much Lower.

Chemically Inert and UV Resistant.

Good Elasticity & Strength Property.

Smooth Inner Surface Prevents Growth of BacteriaHence Making Pumping Easier and Faster.

Insecticide SprayingCompressed Air and Gas application

High Density Polyethylene Pipes (HDPE Pipes)

HDPE Pipes are Manufactured from Grades PE 63, PE 80 and PE 100 and is an ideal Replacement of GI and MS Pipes.

Application

Water Supply for Irrigation.

Drip Irrigation System.

Sprinkler Irrigation System.

Drawing Water from Dams and Borewell for Water Distribution.

External & Internal Drainage and Sewage.

Salt Water Handling.

Telecommunication Cable Ducting.for Domestic and Industrial use.

Specification

High quality HDPE pipes are manufactured as per specification no. IS: 4984/1995 of thebureau of Indian Standards.

HDPE pipes are available in sizes ranging from 20mm - 200mm od with 2.5, 4, 6, 8, 10, 12.5 and 16kg/cm2 pressure rating.

Dimension & Pressure Rating Chart for HDPE Pipe (PE - 63)

SizePN 2.5

Min. Max.

PN 4

Min. Max.

PN 6

Min. Max.

PN 8

Min. Max.

PN 10

Min. Max.

PN 12.5

Min. Max.

PN 16

Min. Max.

Inch

20

25

32

40

50

63

75

90

110

125

140

160

180

200

2.0

2.3

2.8

3.4

3.8

4.3

4.9

5.5

6.1

2.4

2.8

3.3

4.0

4.0

5.0

5.6

6.3

7.0

2.0

2.4

3.0

3.6

4.3

5.3

6.0

6.7

7.7

8.6

9.6

2.4

2.9

3.5

4.2

5.0

6.1

6.8

7.6

8.7

9.7

10.8

2.3

2.8

3.5

4.4

5.3

6.3

7.7

8.8

9.8

11.2

12.6

14.0

2.8

3.3

4.1

5.1

6.1

7.2

8.7

9.9

11.0

12.6

14.1

15.6

2.3

3.0

3.7

4.6

5.8

6.9

8.2

10.0

11.4

12.8

14.6

16.4

18.2

2.8

3.5

4.3

5.3

6.6

7.8

9.3

11.2

12.8

14.3

16.3

18.3

20.3

2.3

2.8

3.6

4.5

5.6

7.0

8.4

10.0

12.3

13.9

15.6

17.8

20.0

22.3

2.8

3.3

4.2

5.2

6.4

7.9

9.5

11.2

13.8

15.5

17.4

19.8

22.2

24.8

2.8

3.4

4.4

5.5

6.8

8.6

10.2

12.2

14.9

16.9

19.0

21.7

24.4

27.1

3.3

4.0

5.1

6.3

7.7

9.7

11.5

13.7

16.6

18.8

21.1

24.1

27.1

30.1

3.4

4.2

5.4

6.7

8.4

10.5

12.5

15.2

18.4

20.9

23.4

26.7

30.0

33.4

4.0

4.9

6.2

7.6

9.5

11.8

14.0

16.7

20.5

23.2

26.0

29.6

33.2

37.0

0.5”

0.75”

1.0”

1.25”

1.5”

2.0”

2.5”

3.0”

4.0”

4.5”

5.0”

6.0”

7.0”

8.0”

15 16

HDPE Spray/Pressure Pipe

Page 10: Idol Plasto Pvt. Ltd., Rajkot, UPVC Plumbing Pipes Fittings

Components of Sprinkler Irrigation System

Size(mm)

Outside Diameter(mm) Class 1 (2.5 kg/cm2)

Min. Max.

Class 2 (3.2 kg/cm2)

Min. Max.

Wall Thickness (mm)

637590110125140

637590110125140

63.675.790.8111

126.2141.3

-2.02.22.73.13.5

-2.42.63.23.64.1

2.02.52.93.43.84.3

2.42.93.43.94.55.0

SPRINKLERIRRIGATIONSYSTEM

17 18

Nozzle

Tee End Cap Riser Pipe

Band Pipe Connector Foot Bu�on

Sprinkler Irrigation System

We o�er HDPE Pipes and fi�ings for Sprinkler System. These are used for spraying water through Nozzles to get maximum water use efficiency.

Sprinkler irrigation system is a method of water conveying system from main water resources to the cultivation fields through spray technology. This type of technology is used mainly where the crops cultivation is irregular and for the crops which require cool breeze. In sprinkler system the water has been pressurized & sprayed through an orifice which has been fi�ed in a self-rotating shut o� nozzle.

These Sprinkler Pipes are manufactured from High Density Polyethylene Granules and special additives such as ultraviolet radiation Stabilizers, Antioxidants, Anti-aging & Environmental stress crack agents, etc.

Advantages

More Cconomical as it helps in Saving Water, Electricity, Fertilizers, Pesticides.

Tough, Portable and Light Weight as Compared to itscounter-parts I.E. Aluminum Sprinkler System HenceMinimizing the Labour and Transportation Costs.

Easy Handling and Quick Installation.

Sprinkler Irrigation Does not Require Surface Shaping of Leveling.

Flexibility is Possible Because Sprinkler Heads areAvailable in a Wide Range of Discharge Capacities.

Application

Agricultural :Variety of Crops like Co�on, Soya Bean,Wheat, Gram, Groundnut, Pulses etc.

Other :Playground.Golf Course Maintenance.Land Decor and Beautification.

Sprinkler Pipes Comply to IS 14151 (Part I & Part II)