ics heat pump technology product guide feb 2011

COMMERCIAL HEAT PUMPS

RESIDENTIAL HEAT PUMPS

The ICS Group has a strong historicalrelationship with DeLonghi-Climaveneta,Europe’s leading manufacturer ofrefrigeration based temperature controlequipment.

Having built their first Heat Pump units in 1979, DeLonghi-Climaveneta can certainly staketheir claim as being one of the most innovative and forward thinking manufacturers of airsource heat pumps and ground source/geothermal heat pump over the last thirty years. Thiswell established historical relationship between the ICS Group and DeLonghi-Climavenetahas formed the basis for ICS Heat Pump Technology being selected by DeLonghi-Climavenetato exclusively provide the DeLonghi Professional range of residential heat pumps andClimaveneta commercial heat pumps throughout the UK and Ireland.

ICS HEAT PUMP TECHNOLOGYDeLonghi-Climaveneta

PARTNERSHIP

2

ICS DELONGHI-CLIMAVENETA PARTNERSHIP pg 2DELONGHI-CLIMAVENETA pg 4-5ICS HEAT PUMP TECHNOLOGY pg 6ICS APPROVED PARTNER PROGRAMME pg 7RESIDENTIAL CASE STUDIES pg 8COMMERCIAL CASE STUDIES pg 9

AIR SOURCE HEAT PUMPS INTRODUCTION pg 10-11MEDIUM TEMPERATURE HEAT PUMPS pg 12-19• Bran H Medium Temperature Air Source Heat Pump pg 12-13

• AWR MTD Medium Temperature Air Source Heat Pump pg 14-15

• DHW Twin Medium Temperature Air Source Heat Pump pg 16-17

• MICS-N Medium Temperature Air Source Heat Pump pg 18-19

HIGH TEMPERATURE HEAT PUMPS pg 20-27• i-KI High Temperature Air Source Heat Pump pg 20-21

• HT 65ºC High Temperature Air Source Heat Pump pg 22-23

• i-NRG High Temperature Air Source Heat Pump pg 24-25

• Prana HT High Temperature Air Source Heat Pump pg 26-27

GROUND SOURCE & GEOTHERMAL HEAT PUMPS INTRODUCTION pg 28-29• BWR MTD Ground Source & Geothermal Heat Pump pg 30-31

• DHW Twin Ground Source & Geothermal Heat Pump pg 32-33

• Prana MTD Ground Source & Geothermal Heat Pump pg 34-35

• Prana DHW Ground Source & Geothermal Heat Pump pg 36-37

BUFFER TANKS pg 38DHW CYLINDERS pg 39FAN COILS & HYDRONICS pg 40-41APPLICATION & SPECIFICATION SUPPORT pg 42ACCESSORIES pg 42TECHNICAL SERVICE SUPPORT pg 43

CONTENTS

3

DeLonghi-Climaveneta is the leading,refrigeration manufacturer in Europe.Thecompany has aworldwide reputation forproduct reliability and quality with over 35years of market leading experience.Thecompany has 5 key manufacturingfacilities occupying some 52,000 squaremeters of production space. Thecompany achieves a turnover level inexcess of 210 million euros worldwide.

DeLonghi-ClimavenetaPRODUCT INNOVATION

RESEARCH & DEVELOPMENTHEAT PUMP FOCUS40 YEARS EXPERIENCE

4

With more than 40 years of experience in air conditioning, DeLonghi-Climaveneta is truly aleading organisation in the expanding domestic, commercial and industrial heat pump market.

1ST IN EUROPE & 5TH IN THE WORLDThe mission and values that have guided us for 40 years have enabled us to become the number one manufacturer in Europe and thefifth in the world within the temperature control sector.

A COMPLETE RANGE OF HEATPUMPS FROM 5KW TO 400KW,A BRAND THAT IS SYNONYMOUSWITH RELIABILITY & QUALITY,

WITH ALL THE ADVANTAGES THAT ONLY

A LEADING MANUFACTURING CAN OFFER.

+ 90,000m² of productive area

+ 5 specialist focused manufacturing plants, 4 located in Italyand 1 located in Shanghai China

+ Complete range of products from 1kW to 2400kW

+ Optimised heat pumps from 5kW to 400kW (modular)

+ First heat pump manufactured in 1979

+ Now 12 ranges of air source and ground source/geothermal

+ Residential and commercial equipment

5

Residential Heat PumpsCommercial Heat Pumps

ICS Heat Pump Technology provides a complete service offering design/specification support,supply/commissioning services and after sales support for air source heat pumps, ground source heatpumps and geothermal heat pumps within both the commercial and residential sectors.

ICS has been providing temperature control systems and heat transfer equipment for an extensive rangeof applications and users since 1988. Twenty years of experience has resulted in an extremely wellestablished business operating throughout the UK, Germany and Ireland employing over 200 people witha combined group turnover of circa £30m.

PROVEN TECHNOLOGYMassive reductions in carbon emissions can be achieved by using heat pumpsand significant cost savings are possible by increasing the efficiency of aproperty when a heat pump system is installed.

Ground source or geothermal heat pumps along with air source heat pumpstake low grade energy from the earth or atmosphere and convert it into highgrade heat energy to be used within the property

Whether a new build project or a retrofit application, the range of heat pumpsprovided by Climaveneta and DeLonghi Professional is able to provide a practicaland cost effective solution to heating and sanitary hot water requirements from5kW to 1200kW.

6

A COMPANY YOU CAN TRUST

• An ICS group company

• Established over 20 years

• £30m turnover throughout UK and Europe

• Over 200 specialised and highly skilledemployees

• Excellent reputation in climate controlservices

• Provides a complete service

• Implements a “best advice” policy to allcustomers

ICS HEAT PUMPTECHNOLOGY

ICS Heat Pump Technology & DeLonghi-Climavenetaprovides a specialist support service to theircustomer base, which is designed to assist the heatpump specifier or installer in maximising the fastdeveloping opportunity within the renewableheating sector.

We understand that providing high quality equipment is only half of the package which is why the ICS ApprovedPartner Programme (APP) has been developed over the past two and a half years in order to provide the specifieror installer with the complete heat pump support service to accompany the 12 ranges of residential and commercialheat pumps provided by DeLonghi-Climaveneta.

The ICS APP is split into 4 main elements each of which provides the specifier or installer with a range of specialistareas to support their business.

• LOGIC ACCREDITED APP• PRODUCT DAY APP• IN COMPANY SALES & TECHNICAL APP• FIELD SUPPORT APP

• PARTNER BRANDED WEBSITE APP• SALES/PRODUCT SUPPORT LITERATURE APP• ICS-DELONGHI NATIONAL MARKETING APP• DIRECT MARKETING/EXHIBITION

SUPPORT APP

• TECHNICAL SUPPORT DESK APP• FIELD BASED TECHNICAL SUPPORT APP• FACTORY SUPPORT APP• INSTALLER/SPECIFIER INTERNET BASED

PARTNER HUB APP

• CPD APP• INDUSTRY NEWS APP• MSC APP• LEGISLATION APP

appapptrainingtraining appappmarketingmarketing£££ appapptechnicaltechnical appappinfocentreinfocentre

APPROVED PARTNER PROGRAMME

HEAT PUMP

7

APPROVED PARTNER PROGRAMME

SUPPORT


CASE STUDIES8

Property: 5 bedroom 400sq/m high specification low energy houseApplication: New build with substantial refurbishmentLocations: North West CoastAccreditations: MSC Accredited equipment usedInstallation: ICS Heat Pump Technology Approved PartnerEquipment: 1 x DeLonghi Professional i-NRG 16.3kW Inverter

Air Source Heat Pump1 x 200L Buffer Tank1 x 300L Optimised unvented cylinder1 x 35L Inertia tank5 x Climaveneta i-life fan coil terminals4 x DeLonghi-Climaveneta system/room controllers

RESIDENTIAL CASE STUDY NEW BUILD WITH SUBSTANTIAL REFURBISHMENT

Property: Affordable HousingApplication: Refurbishment & New BuildLocations: WalesAccreditations: MSC Accredited equipment usedInstallation: ICS Heat Pump Technology Approved PartnerEquipment: 1 x De-Longhi Climaveneta BRAN H 0011 Air

Source Heat Pump1 x Tank In Tank DHW Cylinder1 x Installation Kit

RESIDENTIAL CASE STUDY BBC DIY SOS LOW COST HOUSING

Property: 5 Bedroom Country HouseApplication: New BuildLocations: MidlandsAccreditations: MSC Accredited equipment usedInstallation: ICS Heat Pump Technology Approved PartnerEquipment: 1 x De-Longhi Climaveneta Z1T17 Cube Ground

Source Heat Pump800m PEX-A Pipework in Horizontal StraightFormation1 x 300L Twin Coil Heat Pump Cylinder1 x 100L Buffer Tank

RESIDENTIAL CASE STUDY LARGE NEW BUILD

9

Property: School

Application: New Build School 90kW

Location: Rural Lancashire Town

Installer: North West based - ICS Approved PartnerInstaller

Equipment: 1 x BWR DHW 0101 1 x BWR MTD 0101,2 x 400L Buffer Tank

COMMERCIAL CASE STUDY NEW BUILD SCHOOL

Property: Superstore

Application: Space heating - Mono-valent system 360kW

Locations: Scotland

Accreditations: MSC Accredited equipment used

Installation: ICS Heat Pump Technology Approved Partner

Equipment: ICS-Climaveneta 8 x MICS N 0182 Air SourceHeat Pumps & 2 x Buffer Tanks

COMMERCIAL CASE STUDY SUPERSTORE HEATING PROJECT

Property: NHS Ambulance Station

Application: Retrofit ‘Off Gas’ Boiler Replacement 20kW

Locations: South West England

Equipment: 1 x 20kW high temperature 65ºCClimaveneta AW HT Air Source Heat Pump

Emitter: Radiators

COMMERCIAL CASE STUDY AMBULANCE STATION RETROFIT

COMMERCIAL CASE STUDY SPACE HEATING & COOLINGProperty: Office & WarehousingApplication: Refurbishment 120kWLocations: North West EnglandAccreditations: MSC Accredited equipment usedInstallation: ICS Heat Pump Technology Approved PartnerEquipment: 2 x De-Longhi Climaveneta DHW Air Source

Heat Pumps1 x De-Longhi Climaveneta MICS-N Air SourceHeat Pump2 x ICS HTP Buffer TanksVarious DeLonghi Climaveneta Fan CoilsVarious DeLonghi Climaveneta Air HandlingUnits


AIR SOURCEMEDIUM & HIGHTEMPERATURE HEAT PUMPS

10

Unit &Capacity

BRAN H6-14kWpg 12-13

Residential

HotWater

Heating SimultaneousHeating/Hot Water

Cooling(Optional)

SimultaneousCooling,

Hot Water/Heating

HeatRecovery

ReducedCarbon

Emissions

LowerHeatingCosts

MEDIUM TEMPERATURE AIR SOURCE HEAT PUMPS

HOT WATERHOT WATERHOT WATER HEATINGHEATINGHEATING

AWR MTD XE6-25kWpg 14-15

Residential &Commercial

HOT WATERHOT WATERHOT WATER HEATINGHEATINGHEATING COOLINGCOOLINGCOOLING

DHW Twin20-33kWpg 16-17

Commercial

HOT WATERHOT WATERHOT WATER HEATINGHEATINGHEATING HEATINGHEATINGHEATINGHEATING +HEATING +HOT WATERHOT WATERHEATING +HOT WATER COOLINGCOOLINGCOOLING

COOLING +COOLING +HOT WATERHOT WATERCOOLING +HOT WATERCOOLINGCOOLINGCOOLING

Modular

MICS N20-50kWpg 18-19

Commercial

HEATINGHEATINGHEATING COOLINGCOOLINGCOOLING MODULARMODULARMODULAR

AIR SOURCE HEAT PUMPSHeat energy is collected from the external ambient airusing the heat pumps integral evaporator coil. This energyis then transferred as high grade heat into the building.

Our air source heat pumps provide a very efficient means of utilising renewable energywhilst being very straightforward in their installation.

The DeLonghi-Climaveneta range of air source heat pumps provides units withcapacities from 5kW to 200kW which are suitable for a wide range of applications.

Single phase 240v powered air source heat pump units are available up to a capacityof 14kW and three phase 415v units complete the range for larger residential heatpump and commercial applications.

Modular capability allows for the multiple connection of up to six units operating asone single package, hence large capacity projects can be specified by utilising thismodular configuration approach. The single controller ensures that running hours areequalised & maintained across the various heat pumps whilst also ensuring that thesystem operates with maximum modular part load efficiency at all times.

HIGH TEMPERATURE HEAT PUMP DESIGNATION MEANS THE UNIT IS DESIGNED TO DELIVER A 60ºC OUTPUT TEMPERATURE AT A -5ºC AMBIENT CONDITION

11


Unit &Capacity

i-KI9.5kWpg 20-21

Residential

HotWater

Heating SimultaneousHeating/Hot Water

Cooling(Optional)


Hot Water/Heating

HeatRecovery

ReducedCarbon

Emissions

LowerHeatingCosts

HIGH TEMPERATURE AIR SOURCE HEAT PUMPS

HOT WATERHOT WATERHOT WATER HEATINGHEATINGHEATING MODULARMODULARMODULAR

HT 65ºC10-27kWpg 22-23



i-NRG16.3kWpg 24-25

Residential

HOT WATERHOT WATERHOT WATER HEATINGHEATINGHEATING HEATINGHEATINGHEATINGHEATING +HEATING +HOT WATERHOT WATERHEATING +HOT WATER COOLINGCOOLINGCOOLING

COOLING +COOLING +HOT WATERHOT WATERCOOLING +HOT WATERCOOLINGCOOLINGCOOLING MODULARMODULARMODULAR

Modular

PRANA HT40-100kW

pg 26-27

Commercial

HEATINGHEATINGHEATINGHOT WATERHOT WATERHOT WATER COOLINGCOOLINGCOOLING MODULARMODULARMODULAR

Bran H

HEATINGHEATINGHEATING HOT WATERHOT WATERHOT WATERUnit Description

The DeLonghi Prana Bran H range of air source heat pumps provide a highlevel of performance along with a high level of specification but in a verycost effective package.

• The nominal refrigeration COP* (efficiency) of these units is highaveraging over 4.0 but importantly the performance of these unitswhen operating in lower ambient temperatures is also at a highlevel. Designed to operate in ambient temperatures as low as -15ºCthe Bran H range is more than capable of operating in UK & Irishwinter temperatures.

• These units incorporate a built in heating system circulation pump,control for hot water production including Y Plan valve (optional, notsupplied as standard) operation along with full weather compensationand controls which give a very short defrost cycle in lower ambienttemperatures.

• The Bran H range will operate with a standard 2 channel time clock orprogrammable room stat, please contact technical support forclarification or specification details.

• The Bran H range will function with any heat pump optimised DHWcylinder allowing flexibility in terms of stored water volume to matchthe demands of each particular project.

• This advanced control means that these units are able to operate withvery low system volumes, a minimum open circuit volume of 3.5 litresper nominal kW of heat pump capacity is required which can reduceinstallation costs considerably. A buffer tank is recommended toachieve maximum operational efficiency in order to provide thermalmass and efficient defrost capability.

• These DeLonghi-Climaveneta units are high specification heat pumpswhich are built to exacting standards with regard to efficiency andfunctionality. All the units are European manufactured and benefit fromthe DeLonghi-Climaveneta approach to product development andquality management providing the complete package that would beexpected from a premier manufacturer.

Unit Summary

BRAN H UNITS: AW

CAPACITY: 6kW-14kW

POWER SUPPLY: Single Phase models

A cost effective high specification air source solution providingheating and hot water up to 55ºC output temperature (50ºC at-3ºC ambient)

HIGH EFFICIENCY & PERFORMANCE: COP 4.01 (401% efficient)

*Average coefficient of performance (COP) for the Bran H range based on an ambienttemperature of 7ºC and 35ºC flow temperature

COP 3.6 (360% efficient @ 2ºC ambient & 35ºC flow temp)

NOTE. Actual system efficiency (COP) and annual performance will depend on thedistribution/emiiter system utilised. Care should be taken to ensure that the heat pump is installedin order to provide efficient operational performance.

FEATURES & OPERATIONAL BENEFITS:

• MSC accredited heat pumps, certificate HP0005

• Cost effective

• High efficiency

• Full DHW and heating control

• Built in circulation pump

• High COP

• Full floating control for high efficiency & minimum defrosttime to -15°C ambients

*(COP is shown without circulation pump input power. Please note that unlike most other heatpumps these units incorporate built in circulation pumps, therefore by not including the circulationpump input power we are able to provide a direct performance comparison with other units).

12

Certificate Number MSC HP0005Heat Pumps

• Microgeneration scheme accreditation allowsaccess to grant funding and also guaranteesperformance and manufacturing quality.

AXIAL

Bran H Air Source Medium Temperature Heat Pumps

Main Components

Bran H 0011M 0025M 0041M

Heating capacity (1) kW 6.5 8.7 13.8Effective input power according to EN 14511 (1) kW 1.82 2.31 3.68Heating capacity (2) kW 6.5 8.7 13.8Power absorbed (2) kW 1.65 2.15 3.40COP* (2) 3.94 4.05 4.06Rated water flow (1) m3/h 1.12 1.50 2.37Residual head (1) kPa 41 48 89Fans n0 1 1 2Air flow m3/s 0.9 1 1.9Type of compressor ScrollNo. of compressors n0 1 1 1No. of circuits n0 1 1 1Refrigerant R410A kg 1.75 3 3Oil Mobil EAL ARTIC 22cc kg 1.1 1.24 1.95Pump type circulatorNo. of pumps n0 1 1 1Functioning weight kg 95 115 140Hydraulic connections inches 3/4 3/4 1 1/4Sound pressure level according to EN ISO 3744 dB(A) 72 73 73Sound pressure (3) db(A) 58 59 59Electric power supply V/ph/Hz 230-510

Common Data 0011 0025 0041

Circulation pump IncludedDHW control IncludedHeight/Length/Width mm 640/900/370 940/900/370 1240/900/370Weight kg 105 130 160

Note:1. Heat pump mode: external air temperature 7°C DB/6°C WB, water in flow at 30°C and outlet at 35°C2. The total input is given by the compressor input and fans power input3. Free field sound pressure on a reflecting surface (directivity fact. Q=2), at a distance of 1 meters

from the external surface of the unit. Average value calculated from the sound power

• Condensate drain pan kit.

• Condensing coil protection grills

• Housing and base are made from hot-galvanized epoxy powder coatedsheet metal

• High efficiency and low pressure drop stainless steel (AISI 316) waterexchangers, with anti-freeze heating element and differential pressureswitch

• Hermetic scroll type compressors, equipped with the crankcase heaterand thermal protection

• Condensers finned tubes with copper and aluminium fins high exchangesurface (100% fully quality tested); sub cooling circuit to prevent freezingat the base.

• Axial electric fans, external rotor, electric motor with a 6-pole fitted withthermal protection, housed in an aerodynamic profile with safety grill

• Low external air temperature device:- fan speed regulation with pressure switch which maximisesefficiency at part load

• Electrical modulating frost protection heating within the base whichminimizes the risk of condensate freezing during periods of low ambienttemperature

• The electronic controller menu allows management of:- circulation pump on the system side- domestic hot water production via control of the external three-wayvalve (not supplied)

- 24 hour timer operation for a cylinder heater- control of the incorporated supplementary heating element- outdoor temperature sensor for modulating set point weathercompensation

• Soft start for 230V/1/50Hz units (45 amps & 25 amps for the 0011model)

• Phase sequence control relay

• The water circuit comes complete with:- variable flow circulation pump for all models- differential pressure switch on plant side- expansion vessel (Heat Pump circuit only)- safety valve- manual filling assembly- pressure gauge- manual air vent valve

NB: Optional equipment includes a range of tanks & cylinders plusstandard installation packs, see current price list or contact ICS HPT or yourdistributor for details.

L

L

H

H

WW

13

Residential Heat PumpsICS Renewable Energy Ltd (T/A ICS Heat Pump Technology) and/or Climaveneta S.p.A (DeLonghi) reserve the right to change update or alter the specification & details of any item shown with or withoutprior notice for whatever reason. The information provided within the product guide and/or data sheets is intended for guidance purposes only, please confirm actual current specification and equipmentdetails at point of quotation and/or order.

AWR MTD XE

HEATINGHEATINGHEATING COOLINGCOOLINGCOOLING HOT WATERHOT WATERHOT WATERUnit Description

The DeLonghi Prana AWR MTD XE range of air source heat pumps providean extremely high level of performance and a high level of specification.The nominal refrigeration COP* (efficiency) of these units is very highaveraging over 4.17 and importantly the performance of these unitswhen operating in lower ambient temperatures is also at a very highlevel. Designed to operate in ambient temperatures as low as -15ºC theAWR MTD XE range is more than capable of operating with high efficiencyin UK & Irish winter temperatures.

• These units incorporate a built in heating system circulation pump,control for hot water production including Y Plan valve (optional, notsupplied as standard) operation along with full weather compensationand sophisticated controls which give a very short defrost cycle in lowerambient temperatures.

• The AWR MTD range will operate with a standard 2 channel time clockor programmable room stat, please contact technical support forclarification or specification details.

• A modulating source fan controls efficiency and maximises theperformance on part loads by drawing the correct amount of airthrough the unit to match the load requirement of the property at anytime, so reduces running costs and also allows the units to functionwith any Heat Pump optimised thermal store or cylinder.

• This advanced control means that these units are able to operate withvery low system volumes, a minimum open circuit volume of 3.5 litresper nominal kW of Heat Pump capacity is required which can reduceinstallation costs considerably. A buffer tank is recommended toachieve maximum operational efficiency in order to provide thermalmass and efficient defrost capability.

• In addition to these features these units also have a built insupplementary heater which provides additional capacity in ambienttemperatures below -5ºC.

• These units also provide reversible operation, this means they canprovide cooling whilst being able to prioritise hot water production,this means that when connected via a fan coil distribution system theseAWR MTD units can provide a complete residential or light commercialclimate control option.

• These DeLonghi-Climaveneta units are high specification heat pumpswhich are built to exacting standards with regard to efficiency andfunctionality. All the units are European manufactured and benefit fromthe DeLonghi-Climaveneta approach to product development andquality management providing the complete package that would beexpected from a premier manufacturer.

Unit Summary

MTD UNITS: AWR MTD XE

CAPACITY: 6kW-25kW

POWER SUPPLY: Single Phase & Three Phase models

These units can provide heating or cooling and hot water up to55ºC, the efficient unit design incorporating supplementaryheating enables the AWR MTD XE to operate efficiently in lowambient conditions to -15ºC.


*Average coefficient of performance (COP) for the AWR MTD XE range based on anambient temperature of 7ºC and 35ºC flow temperature.



• MSC accredited heat pumps (AWR MTD XE accreditation pending)

• Full DHW and heating control

• Reversible operation can provide cooling for A/C applications

• Built in circulation pump

• 55ºC output temperature (50ºC at -5ºC ambient)

• High efficiency modulating source fan(s) and circulation pump

• Minimum defrost time operating to -15ºC ambients

• Supplementary Electric Heating Included for -5ºC ambientoperation


14

AXIAL

MTD XE Air Source Medium Temperature Heat Pumps

Main Components

AWR-MTD XE 00001111MMSS 00002255MMSS 00003311MMSS 00004411MMSS 00003311TT 00004411TT 00005511TT 00006611TT 00009911TT

Nominal heating power (1) kW 6.30 7.40 11.2 14 10.9 14 15.9 17.9 25.10Total absorbed power (2) kW 1.50 1.80 2.60 3.30 2.60 3.30 3.80 4.20 6COP 4.13 4.15 4.22 4.16 4.15 4.15 4.11 4.25 4.19Cooling capacity (3) kW 7.20 8.30 12.3 15.7 11.7 15.8 17.7 20.2 29.2Total absorbed power (2) kW 1.90 2.20 3.30 4.10 3.10 4.20 4.70 5.30 7.80EER Eurovent * 3.79 3.77 3.73 3.83 3.77 3.76 3.77 3.81 3.74EER 3.82 3.82 3.81 3.84 3.84 3.81 3.81 3.81 3.85Heating capacity (4) kW 6.10 7.30 10.8 13.6 10.6 13.8 15.4 17.5 24.60Total absorbed power (2) kW 1.90 2.30 3.30 4.10 3.20 4.30 4.60 5.20 7.40Cooling capacity (5) kW 5.20 6.30 9.20 11.7 8.60 11.9 13.2 15.2 22.10Total absorbed power (2) kW 1.70 2.20 3.10 4.00 3.00 4.00 4.60 5.00 7.20EER Eurovent * 3.06 2.86 2.97 2.93 2.87 2.98 2.87 3.04 3.07ESEER 3.62 3.63 3.52 3.46 3.42 3.65 3.24 3.55 3.57Compressor type SCROLLN. Compressors N. 1Refrigerant R410AN. fans N. 1 1 2 2 2 2 2 2 3Plant side pump type (6) Ci Ci Ci Ci Ci Ci Ci Ci CiElectrical power supply V-Ph~Hz 230-1~50 230-1~50 230-1~50 230-1~50 400-3N~50 400-3N~50 400-3N~50 400-3N~50 400-3N~50Start-up current A 27 30 45 45 48 64 64 75 111Sound power (7) dB(A) 69 69 71 71 71 71 71 72 74Sound pressure (8) dB(A) 54 54 56 56 56 56 56 57 58L mm 900 900 900 900 900 900 900 1550 1550H mm 1240 1240 1240 1390 1240 1390 1390 1200 1700W mm 420 420 420 420 420 420 420 450 450Operational weight kg 145 150 155 170 155 170 180 250 335

• Condensate drain pan kit.• Condensing coil protection grills• Housing and base are made from hot-galvanized epoxy powder coated sheet

metal• High efficiency and low pressure drop stainless steel (AISI 316) water

exchangers, with anti-freeze heating element and differential pressure switch• Hermetic scroll type compressors, equipped with the crankcase heater and

thermal protection• Condensers finned tubes with copper and aluminium fins high exchange

surface (100% fully quality tested); sub cooling circuit to prevent freezing atthe base.

• Axial electric fans, external rotor, electric motor with a 6-pole fitted with thermal protection, housed in an aerodynamic profile with safety grill

• Low external air temperature device:- fan speed regulation with pressure switch which maximises efficiency at part load

• Electrical modulating frost protection heating within the base which minimisesthe risk of condensate freezing during periods of low ambient temperature

• Soft start for 230V/1/50Hz units (45 amps)• Reversible operation allows the production of chilled water for an

air-conditioning circuit • The electronic controller menu allows management of:

- circulation pump on the system side- domestic hot water production via control of the external three-way valve (not supplied)- 24 hour timer operation for a cylinder heater- control of the incorporated supplementary heating element - outdoor temperature sensor for modulating set point weather compensation

• Phase sequence control relay• The water circuit comes complete with:

- variable flow circulation pump for all models- differential pressure switch on plant side- expansion vessel (Heat Pump circuit only)- safety valve- manual filling assembly- pressure gauge- manual air vent valve

NB: Optional equipment includes a range of tanks & cylinders plus standard installation packs, see current price list or contact ICS HPT or your distributor for details.

15


ICS Renewable Energy Ltd (T/A ICS Heat Pump Technology) and/or Climaveneta S.p.A (DeLonghi) reserve the rightto change update or alter the specification & details of any item shown with or without prior notice for whateverreason. The information provided within the product guide and/or data sheets is intended for guidance purposesonly, please confirm actual current specification and equipment details at point of quotation and/or order.

Note:1. Water in-out 30/35°C (plant side), outdoor air temperature 7°C b.s./ 6°C b.u.2. Total input is obtained from compressor input and fan input3. Water in-out 23/18°C (plant side), outdoor air temperature 35°C b.s.4. Water in-out 40/45°C (plant side), outdoor air temperature 7°C b.s./ 6°C b.u.5. Water in-out 12/7°C (plant side), outdoor air temperature 35°C b.s.6. Ci=Circulator; Ce=Centrifugal7. Sound power level according to ISO 9614 and Eurovent 8/18. Average sound pressure level above one reflecting surface (Q=2) at 1 meter from the outside dimensions of the unit.* According to the Eurovent standard without circulation pump input power.

L

L

H

H

WW

DHW Twin

Unit Description

The DeLonghi Prana AWR DHW are a unique range of commercial airsource heat pumps which are capable of providing a high efficiencycombination of output conditions:

• Heating only• Simultaneous heating and hot water to 55ºC**• Hot water only• Cooling only• Simultaneous cooling and hot water with up to 100% heat recovery***• Simultaneous cooling and heating with up to 100% heat recovery***

These units can be specified to suit a particular application and due totheir ability in being able to provide two simultaneous outputs they areable to provide real benefits on both large residential and commercialapplications.

Within the commercial sector the AWR DHW range provides flexibility andreal environmental benefits. These Heat Pumps will provide up to 100%heat recovery which then benefits the user with free heating or hot water.

A growing demand for energy and heat recovery has created a highlyefficient requirement to use these units to recover waste energy fromwaste water or fluid flows, recovering energy from cooling towers orwaste water flows is easily achievable when utilising these units in heatrecovery specification.

Also these heat pump units will provide up to 100% duty on eitherprimary or secondary heat exchangers along with the ability to providea combination of heating and hot water simultaneously or heating andcooling simultaneously with up to 100% heat recovery. This allows theseheat pump units to provide this simultaneous output feature to manageseasonal heating and cooling loads from the same heat pump unit***.

These DeLonghi-Climaveneta units are high specification heat pumpswhich are built to exacting standards with regard to efficiency andfunctionality. All the units are European manufactured and benefit fromthe DeLonghi-Climaveneta approach to product development and qualitymanagement providing the complete package that would be expectedfrom a premier manufacturer.

Unit Summary

DHW TWIN UNITS: AWR

CAPACITY: 20kW-33kW


These units provide simultaneous supplies of domestic hotwater and heating/air conditioning.


*Average coefficient of performance (COP) for the AWR DHW range based on anambient temperature of 7ºC and 35ºC flow temperature



• MSC accredited heat pumps, certificate HP0005

• Fully self-contained unit – no external refrigerant pipes

• Standard pipe work installation to suit a plumber or heating engineer

• Highly efficient and flexible design with easy to use controls

• Heating, cooling and domestic hot water provided

• Suitable for large capacity hot water users and simultaneous heating & air conditioning applications


**A higher temperature DHW output is available when the unit is operating in heating mode.The actual available capacity of DHW is dependent on the heating output being provided at anytime. The available part load DHW capacity will vary dependant on the part load capacityavailable in-line with the above.

***The AWR DHW range of units are designed to provide simultaneous heating/DHW and coolingwhen operating in ambient temperatures above 10ºC unless a year round cooling load isavailable. Please contact ICS Heat Pump Technology Technical Support to confirm the suitabilityof this range of equipment for each application.

HEATINGHEATINGHEATING COOLINGCOOLINGCOOLING HOT WATERHOT WATERHOT WATERCOOLINGCOOLINGHEATINGHEATINGHEATING +HEATING +HOT WATERHOT WATERHEATING +HOT WATER

COOLING +COOLING +HOT WATERHOT WATERCOOLING +HOT WATER

16

Commercial Heat Pumps



r HFCR-410A

AXIAL

r HFCR-410A

AXIAL

DHW Twin Air Source Medium Temperature Heat Pumps

Main Components

Note:1. Heating mode: external air temperature 7°C b.s.- 6°C b.u.,inlet water at 30°C and outlet at 35°C2. Heating mode: external air temperature 7°C b.s.- 6°C b.u.,inlet water at 45°C and outlet at 50°C3. Cooling mode: external air temperature 35°C b.s., inlet water at 23°C and outlet at 18°C4. Cooling mode: external air temperature 35°C b.s., inlet water at 12°C and outlet at 7°C5. Sound pressure at 1 meter distance from the external surface of the unit, free field.

* According to the Eurovent standard without circulation pump input power.

• Housing and base are made from hot-galvanized epoxy powder coated sheet metal

• Hermetic scroll type compressors, equipped with the crankcase heater and thermal protection

• Condensers finned tubes with copper and aluminium fins high exchange surface(100% fully quality tested); sub cooling circuit to prevent the icing at the base

• Axial electric fans, external rotor, electric motor with a 6-pole fitted with thermalprotection, housed in aerodynamic profile with safety grill.- continuous fan speed regulation with pressure switch for modulating load management

• Primary stainless steel (AISI 316) plate heat exchanger with high efficiency andlow pressure drop (providing domestic hot water or heating) positioned directlyafter the compressor which gives an efficient high temperature output providingan output kW capacity up to 100% of the Heat Pump duty.

• When combined with the secondary heat exchanger (cooling duty) these unitswill provide either full or partial heat recovery which is constantly optimised via the advanced logic adjusting controller.

• Secondary stainless steel plate heat exchanger providing an output kW capacityup to 100% of the heat pump duty with high efficiency and low pressure dropprovides the supply of both hot or cold water for the application with or withoutany hot water or heating production on the primary heat exchanger.

• The water circuit comes complete with:- primary circuit water pump for domestic hot water or heating circuit- secondary circuit plant side water pump for heating or cooling circuit- differential pressure switch on plant side- expansion vessel Heat Pump circuit only- safety valve (6 bar)- manual filling assembly- Pressure gauge- venting and draining valve

• Soft start for 230V/1/50Hz units AWR DHW/S

NB: Optional equipment includes a range of tanks & cylinders plus standardinstallation packs, see current price list or contact ICS HPT or your distributor for details.

Prioritised hot water production in simultaneous DHW & heating mode

HEATING + DOMESTIC HOT WATER**Partial or 100% heat recovery available in simultaneous cooling & heating mode

HEATING + AIR CONDITIONING***

L

H

W

17

AWR DHW 0065SL 0101SL

Heating capacity (A7/W35) (1) kW 21.3 33.5Total power input (compressors & fans) kW 5.6 8.5COP* 3.80 3.94Recovery heating capacity (A7/W50) (2) kW 18.1 31.9Power input kW 7.7 12.3COP* 2.35 2.59Cooling Capacity (A35/W18) (3) kW 21.1 33.0Total power input (compressors & fans) kW 5.8 9.4EER* 3.64 3.51Cooling Capacity (A35/W7) (4) kW 17.0 27.7Total power input (compressors & fans) kW 5.9 9.5EER* 2.88 2.92Type of compressor scroll N.° of compressors n° 1Refrigerant R407CPlant side pump type centrifugalDHW side pump type circulator Power supply V/Ph/Hz 400V-3N~ 50Hz Starting current A 127 101Sound pressure (5) dB(A) 66 62Height/Length/Width mm 1200/1700/650 1700/1700/650Net weight kg 295 378

ICS Renewable Energy Ltd (T/A ICS Heat Pump Technology) and/or Climaveneta S.p.A (DeLonghi) reserve the right to change update or alter the specification & details of any item shown with or withoutprior notice for whatever reason. The information provided within the product guide and/or data sheets is intended for guidance purposes only, please confirm actual current specification and equipmentdetails at point of quotation and/or order.

MICS-N

MODULARMODULARMODULARCOOLINGCOOLINGCOOLINGHEATINGHEATINGHEATINGSUITABLE FORSUITABLE FOR

SWIMMING POOLSSWIMMING POOLSSUITABLE FOR

SWIMMING POOLSUnit Description

The Climaveneta MICS-N commercial heat pump range provides a fullyoptimised Air Source Heat Pump installation with the capability to providea modular package in excess of 200kW in capacity which operates as asingle unit. This provides a very high specification air source installationfor both large residential and commercial applications.

• A high COP is achieved at nominal conditions with a high performanceand specification designed for medium temperature heating only.

• These units have twin compressors for maximum efficiency when operating on partial load duty. They also have the ability to operate with four heat pumps acting as a single unit i.e. three slaves and onemaster where the lead unit will interface with a BMS system or equivalent.

• These units are reversible and provide heating or cooling to match thedemands of the project.

• Each MICS-N single unit incorporates a twin compressor design whichprovides a highly efficient output when operating under part load conditions i.e. in modular multi unit/multi compressor configuration.

• Circulation pumps are incorporated within the unit to give a completeinstalled solution with a high specification and highly efficient system.The full floating control and modulating performance of the system provides a highly intelligent control function to give maximum performance and efficiency.

• The units also incorporate a vertical air discharge system which allowsfor compact positioning of single or multiple units to fit into restrictedlocations.

• These DeLonghi-Climaveneta units are high specification heat pumps which are built to exacting standards with regard to efficiency and functionality. All the units are European manufactured and benefit fromthe DeLonghi-Climaveneta approach to product development and quality management providing the complete package that would be expected from a premier manufacturer.

NB: Optional equipment includes a range of tanks & cylinders plusstandard installation packs, see current price list or contact ICS HPT or yourdistributor for details.

Unit Summary

MICS-N UNITS: AWR

CAPACITY: 20kW-50kW (modular parallel systems)

POWER SUPPLY: Three Phase models

These units provide medium to large capacity installations with a highefficiency modular system which can provide heating and airconditioning from 20kW to 1000kW (modular).

HIGH EFFICIENCY & PERFORMANCE: COP 3.85 (385% efficient)*Average coefficient of performance (COP) for the MICS-N range based on an ambienttemperature of 7ºC and 35ºC flow temperature.


NOTE. Actual system efficiency (COP) and annual performance will depend on the distribution/emiitersystem utilised. Care should be taken to ensure that the heat pump is installed in order to provide efficientoperational performance.


• MSC accredited heat pumps, certificate HP0005 • Provides heating & cooling with a number of control options• Full BMS compatability with single control function for multiple units• Modular system which provides flexibility and ease of installation• Vertical discharge fan with compact footprint for ease of positioning• Very efficient twin compressor design provides high part load

efficiency when providing heating and cooling on an annual basis• Fully self-contained unit – no external refrigerant pipes• Water based system which allows the heating and A/C installation to

be carried out by a mechanical contractor • Highly efficient and flexible design which can be specified as a

package with fan coils/internal air handlers


18

***modular capability


• Microgeneration scheme accreditation allowsAccess to grant funding and also guaranteesPerformance and manufacturing quality.

r HFCR-410A

AXIAL

r HFCR-410A

AXIAL

MICS-N Air Source Medium Temperature Heat Pumps

Main Components

MICS-N 0072 0092 0122 0152 0182

Heating capacity at full load (1) kW 20.7 26.2 34.5 43.6 48.9Absorbed power at full load (1) kW 5.3 6.8 9.2 11.3 12.5COP at full load (1) 3.9 3.85 3.75 3.86 3.91Nominal Cooling capacity (1) kW 17.3 21.8 30.3 37.4 42.5Total absorbed power (1) kW 6.50 9.30 10.7 13.4 15.5EER (1) 2.66 2.34 2.83 2.79 2.74ESEER (1) 3.86 3.75 3.78 3.92 3.96Nominal water flow (1) m3/h 3 3.80 5.20 6.40 7.30Nominal Heating power (2) kW 20.2 26.1 33.9 42.6 47.9Total absorbed power (2) kW 6.50 8.60 11.2 14 15.4COP (2) 3.11 3.02 3.03 3.04 3.11Absorbed current (3) A 14 17.7 23.9 29.3 31.3Nominal water flow (3) m3/h 3.50 4.50 5.90 7.40 8.30Hydraulic connections (3) inches 1”1/4 1”1/4 1”1/4 1”1/4 1”1/4Operational weight (3) kg 310 330 410 450 480No. fans (3) N. 1 1 2 2 2Airflow (3) m3/h 9000 9000 18000 18000 18000Compressor type SCROLLRefrigerant R410ASound pressure level (3) dB(A) 68 68 71 71 71Sound power dB(A) 80 80 83 83 83Electrical power supply V-Ph~Hz 400V-3N~50Hz 400V-3N~50Hz 400V-3N~50Hz 400V-3N~50Hz 400V-3N~50HzLength mm 1040 1040 1630 1630 1630Height mm 1630 1630 1630 1630 1630Width mm 790 790 790 790 790

Note:1. Evaporator water (in/out) 12/7°C, condenser air (in) 35°C,

based on Eurovent standard

2. Outdoor air temperature +7ºC CBS, 85% RH, water inlet temperature +40ºC, outlet +45ºC. Compressors in operation: A+B

3. Noise level measured at 1 m in open field conditions

4. Outdoor air temperature +35ºC, water inlet temperature +12ºC, outlet +7ºC. Compressors in operation: A+B

• Modular designed to minimise required installation space• A Keyboard Master Control (KMPH) is the central control for multiple

Units connected together with a primary function of supervisingThe operation of all the modules in synergy together.

• Flex Energy technology for automatic air flow, water flow and water temperature control

• Electronic thermostatic valve• 20-50kW single units• 50kW-1000kW packaged systems• Twin compressor system per unit, maximum part load efficiency• Compact footprint• Vertical discharge fans• The hydraulic unit comes complete with:

- variable delivery pump- expansion tank- filling unit- discharge valve- air valve

H

W L

19



MODULARMODULARMODULAR

MODULAR CAPABILITY

The MICS-N range is designed for modular application to accommodate multi unit larger capacity requirements***.

INTERNAL VERSION

• MICS-CN ducted unit• 20kW- 50kW capacity• Modular capability• Provides specification

flexibility


i-KI

SUITABLE FORSUITABLE FORSWIMMING POOLSSWIMMING POOLS

SUITABLE FORSWIMMING POOLSMODULARMODULARMODULARHOT WATERHOT WATERHOT WATERHEATINGHEATINGHEATING BI-VALENTBI-VALENTBI-VALENTUnit Description

• The 60ºC DeLonghi Professional i-KI 9.5kW Inverter drivenair source heat pump is suitable for either new build or retrofit applications with efficient performance and a lownoise level of 50dB(A) at 1m. A circulation pump is incorporated within the unit for ease of installation and a remote weather sensor is providedwhich will allow the unit to be positioned in any location whilst operatingwith a high performance weather compensated heating output.

• The integrated controller accurately follows the actual load of the building utilising a modulating DC inverter source fan and modulatingcirculation pumps in order to maximise performance.

• The i-KI incorporates the new Climaveneta integrated heating zone + DHW+ solar controller as standard specification. This allows the specifier to incorporate all the required elements of system control with complete flexibility within the single i-KI heat pump controller.

• The 50dba low noise performance of this unit allows for flexibility in positioning and location and the in-built modulating circulation pump provides the installer with a unit which is very straightforward to install andcommission. The NADI integrated controller also provides full domestic hotwater prioritisation controlling the system three port valve (optional, notsupplied as standard), in addition the i-KI is fully weather compensated for efficient operation and performance via the remote wired weather sensor.

• The modulating circulation pump ensures that energy usage and output are matched to meet demand ensuring that maximum performance and control is maintained at all times.

• The new Climaveneta NADI integrated electronic controller provides a highlevel of application flexibility and functionality. The remote keyboard kit with wired indoor and outdoor weather sensors allows dynamic control ofdelivered water temperature. The controller ensures full optimisation of comfort within the property and increases overall energy efficiency, providing the following functions:

+ Single heating zone control for radiator, underfloor or fan coil+ Multiple heating zone control available via optional expansion module+ Solar thermal control via optional extension module+ Remote weather sensor for accurate weather compensated performance+ Anti-legionella cycle control for DHW cylinder+ Bi-valent control for additional heat source+ Modulating circulation pump and source fan provide maximum efficiency

Unit Summary

i-KI UNITS: Inverter Air Source

CAPACITY: 9.5kW

POWER SUPPLY: Single Phase models

This compact and high performing air source heat pump provides ahigh temperature 60ºC output temperature in ambients as low as -5ºC and a 55ºC output temperature when operating in a -20ºCambient condition. The unit provides a low noise level of 50dB(A) at1 meter and is complete with circulation pump, remote weathersensor plus integrated heating zone control and solar thermal control*.

High performance, high specification and high value.

HIGH EFFICIENCY & PERFORMANCE: COP 4.02 (402% efficient)**Coefficient of performance (COP) for the 9kW i-KI based on an ambient temperature of7ºC and 35ºC flow temperature



• 60ºC output temperature at -5ºC ambient• Low noise level of 50dB(A) at 1m• Freeze prevention drain pan heating included as standard• High performance, delivers 55ºC at -20ºC ambient temperature• Integrated NADI control for heat pump, heating zones* and solar thermal*• Inverter driven providing flexibility in application and performance• Remote weather sensor provides flexibility in positioning and location• Built in circulation pump allows for simple installation

* standard unit controller for single heating zone control, optional extension modules allow furtherheating zone control and solar thermal control

r HFCR-410A

AXIAL

r HFCR-410A

AXIAL

20

**(COP is shown without circulation pump input power. Please note that unlike most other heatpumps these units incorporate built in circulation pumps, therefore by not including the circulationpump input power we are able to provide a direct performance comparison with other units).



i-KI Air Source High Temperature Heat PumpsHIGH TEMPERATURE HEAT PUMP DESIGNATION MEANS THE UNIT IS DESIGNED TO DELIVER A 60ºC OUTPUT TEMPERATURE AT A -5ºC AMBIENT CONDITION

Main Components

• Condensate drain pan kit.• Condensing coil protection grills• Housing and base are made from hot-galvanized epoxy powder coated sheet metal• High efficiency and low pressure drop stainless steel (AISI 316) water

exchangers and differential pressure switch• Rotary DC inverter compressor, equipped with the crankcase heater and

thermal protection• Condensers finned tubes with copper and aluminium fins high exchange surface

(100% fully quality tested).• Axial variable speed fan, electric motor, housed in an aerodynamic profile with

safety grill• Remotely positioned low external air temperature device

- fan speed regulation which maximises efficiency at part load

• The NADI electronic controller menu allows management of:- circulation pump on the system side- domestic hot water production via control of the external three-way valve (not supplied)

- 24 hour timer operation for a cylinder heater- control of supplementary heating element - outdoor temperature sensor for modulating set point weather compensation- heating zone control, single as standard with multiple zone option- solar thermal control via optional extension module

• The water circuit comes complete with:- variable flow circulation pump for all models- differential pressure switch on plant side- expansion vessel (Heat Pump circuit only)- safety valve- manual filling assembly- pressure gauge- manual air vent valve


i-KI 0031mNominal Heating power kW 1 9.55 Total absorbed power kW 2 2.31COP** 4.02Compressor type SCROLL INVERTER DC No. Compressors N. 1 Refrigerant R410A No. fans N. 1 Fan type 3 i-CiPlant pump type 3 i-Ci Heat pump circuit expansion vessel Included Electrical power supply V-Ph~Hz 230-1~50 Sound power dB(A) 4-5 64 Sound pressure level dB(A) 4-5 50

Dimensions 0031mL mm 850H mm 882D mm 330Operational weight kg 85

Note:

1. Water in-out 30/35°C (plant side), outdoor air temperature 7°C b.s./ 6°C 2. Total input is obtained from compressor input and fan input. 3. i-Ci= Brushless DC motor4. Sound Pressure level according to ISO 9614 and Eurovent 8/15. Average Sound Pressure level above one reflecting surface (Q=2) at 1 metre

882

330 850

21


MODULAR CAPABILITY

The i-KI range is designed for modular application to accommodate multi unit larger capacity requirements***.

BI-VALENTBI-VALENTBI-VALENT

BI-VALENT INTEGRATED CONTROLIntegrated bi-valent systems are now becoming more relevant, a heat pump operating with a secondary heat source is a practical option should theapplication demand this type of system. The integrated controller will provide an interface between the heat pump and the secondary heat sourcesubject to appropriate system design.

Residential Heat PumpsICS Renewable Energy Ltd (T/A ICS Heat Pump Technology) and/or Climaveneta S.p.A (DeLonghi) reserve the right to change update or alter the specification & details of any item shown with or withoutprior notice for whatever reason. The information provided within the product guide and/or data sheets is intended for guidance purposes only, please confirm actual current specification and equipmentdetails at point of quotation and/or order.

HT 65ºC

HOT WATERHOT WATERHOT WATERHEATINGHEATINGHEATING MODULARMODULARMODULARUnit Description

The DeLonghi AW HT represents the next generation of air source heatpumps with an output temperature of 65ºC. Unlike medium temperatureheat pumps these units are able to provide an output of 65ºC in ambienttemperatures as low as -12ºC with a minimum operating temperature of-20ºC.

• This DeLonghi AW HT range of air source heat pumps provides an extremely high level of performance and a high level of specificationwhich makes them ideal for retrofit applications for both the residentialand commercial sectors.

• The fact that the installer has to only provide minimal modifications tothe existing heating distribution system and hot water cylinder/tank (due to the 65ºC output temperature of the unit) provides significant installation benefits in terms of cost & time on a retrofit or boiler replacement application**.

• The nominal refrigeration COP* (efficiency) of these units is very highaveraging over 4.15 but importantly the performance of these units inreducing ambient temperatures is also at an extremely high level.

• These units incorporate a built in heating system circulation pump, control for hot water production including Y Plan valve (optional, not supplied as standard) operation along with full weather compensationand sophisticated controls.

• This advanced control means that these units are able to operate withvery low system volumes, a minimum open circuit volume of 7 litres per nominal kW of Heat Pump capacity is required which can reduceinstallation costs considerably. A buffer tank is required to achieve maximum operational efficiency in order to provide thermal mass andefficient defrost capability.

• DeLonghi-Climaveneta units are high specification heat pumps whichare built to exacting standards with regard to efficiency and functionality. All the units are European manufactured and benefit fromthe DeLonghi-Climaveneta approach to product development and quality management providing the complete package that would be expected from a premier manufacturer.

Unit Summary

HT UNITS: AW HT CAPACITY: 10kW-27kWPOWER SUPPLY: Single Phase & Three Phase models

These units provide an output temperature of 65ºC for eitherheating or DHW production.

HIGH EFFICIENCY & PERFORMANCE: COP 4.15 (415% efficient)*Average coefficient of performance (COP) for the AW HT range based on an ambienttemperature of 7ºC and 35ºC flow temperature




• MSC accredited heat pumps, certificate HP0005 • Full DHW and heating control • Built in circulation pump • High COP 4.22• Pro extended control for high efficiency• Minimum defrost time with a minimum operating temperature of -20°C• 65°C operation at -12°C ambient temperature

**Please note that this unit is capable of providing a maximum output temp of 65°C, theunit will provide this output temperature for heating only at the times of year where it isnecessary. ie: The weather compensation control incorporated within the unit will providecorrespondingly lower output temperatures to match external ambient temperatures,therefore providing a high seasonally corrected Coefficient of Performance.


22




r HFCR-410A

AXIAL

r HFCR-410A

AXIAL


HT 65ºC Air Source High Temperature Heat PumpsHIGH TEMPERATURE HEAT PUMP DESIGNATION MEANS THE UNIT IS DESIGNED TO DELIVER A 60ºC OUTPUT TEMPERATURE AT A -5ºC AMBIENT CONDITION

Main Components

AW HT 0031MS 0041MS 0041T 0061T 0071T 0041TS 0061TS 0071TS

Nominal heating power (1) kW 10.4 14.9 14.1 19.7 26.6 14.1 19.7 26.6Total absorbed power (2) kW 2.50 3.50 3.30 4.70 6.1 3.30 4.70 6.1COP 4.10 4.12 4.14 4.12 4.26 4.14 4.12 4.26Heating capacity (3) kW 10.4 14.3 14.3 19.7 27.1 14.3 19.7 27.1Total absorbed power (2) kW 3 4 4 5.60 7.4 4 5.60 7.4COP 3.30 4.48 3.48 3.45 3.58 3.48 3.45 3.58Heating capacity (4) kW 9.10 12.5 12.5 17.5 23.5 12.5 17.5 23.5Total absorbed power (2) kW 2.50 3.30 3.30 4.60 5.9 3.30 4.60 5.9COP 3.44 3.66 3.66 3.72 3.88 3.66 3.72 3.88Heating capacity (5) kW 7.80 11.4 11.4 14.8 21.2 11.4 14.8 21.2Total absorbed power (2) kW 3.80 5.40 5.40 7.60 10.4 5.40 7.60 10.4COP 1.97 2.06 2.06 1.91 1.99 2.06 1.91 1.99Compressor type SCROLL EVIN. Compressors N. 1Refrigerant R407CN. fans N. 2 2 2 2 3 2 2 3Plant side pump type (6) CiElectrical power supply V-Ph~Hz 230-1~50 230-1~50 400-3N~50 400-3N~50 400-3N~50 400-3N~50 400-3N~50 400-3N~50Start-up current A 44 45 64 101 99 35 55 99Sound power (7) dB(A) 70 70 70 71 74 70 71 74Sound pressure (8) dB(A) 55 55 55 56 59 55 56 59Length mm 900 900 900 900 1470 900 900 1470Height mm 1240 1390 1390 1390 1700 1390 1390 1700Width mm 420 420 420 420 570 420 420 570Operational weight kg 150 160 160 170 320 160 170 320

Note:


• High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with anti-freeze heating element and differential pressure switch

• High efficiency cycle EVI Hermetic Scroll Compressor (with hot gas direct injection into the compressor) to reach 65°C, with the crankcase heater and thermal protection

• Condensers finned tubes with copper and aluminium fins high exchange surface (100% fully quality tested); sub cooling circuit to prevent the icing atthe basement

• Axial electric fans, external rotor, electric motor with a 6-pole fitted with thermal protection, housed in aerodynamic conveyor profile with safety grill

• A condense collecting tray within water discharge• Condensing coil protection grills

• Soft start for 230V/1/50Hz units (45 amps)• The water circuit comes complete with:

- circulation pump for all models- differential pressure switch on plant side- expansion vessel – Heat Pump circuit only- safety valve- manual filling assembly- pressure gauge

• Remote outside air sensor (wired)• Remote internal keyboard kit (wired)• The electronic board PRO EXTENDED allows for control of:

- circulation pump on system side- domestic hot water control by external Y Plan three-way valve (accessory)- outdoor temperature sensor for modulating set point weather compensation

NB: Optional equipment includes a range of tanks & cylinders plus standard installation packs, see current price list or contact ICS HPT or your supplier for details.

L

H

W

23

1. Water in-out 30/35°C (plant side), outdoor air temperature 7°C b.s./ 6°C b.u.2. Total input is obtained from compressor input and fan input3. Water in-out 40/45°C (plant side), outdoor air temperature 7°C b.s./ 6°C b.u.4. Water in-out 30/35°C (plant side), outdoor air temperature 2°C b.s./ 1°C b.u.5. Water 65°C, outdoor air temperature -7°C b.s./ 1°C b.u.6. Ci=Circulator; Ce=Centrifugal7. Sound power level according to ISO 9614 and Eurovent 8/18. Average sound pressure level above one reflecting surface (Q=2) at 1 meter

from the outside dimensions of the unit


MODULAR CAPABILITY

The AW HT range is designed for modular application to accommodate multi unit larger capacity requirements***.



ICS Renewable Energy Ltd (T/A ICS Heat Pump Technology) and/or Climaveneta S.p.A (DeLonghi) reserve the rightto change update or alter the specification & details of any item shown with or without prior notice for whateverreason. The information provided within the product guide and/or data sheets is intended for guidance purposesonly, please confirm actual current specification and equipment details at point of quotation and/or order.

i-NRG

Unit Summary

i-NRG UNITS: Inverter Air Source External or Internal Positioning

CAPACITY: 16.3kW

POWER SUPPLY: Single & Three Phase models

This new generation low noise air source heat pump allows for completeflexibility in terms of location (internal or external) and applicationproviding heating, cooling and domestic hot water with full heat recovery,providing a 60ºC output temperature when operating in -10ºC ambients.

HIGH EFFICIENCY & PERFORMANCE: COP 3.9 (390% efficient)Coefficient of performance (COP) for the i-NRG range based on an ambient temperatureof 7ºC and 35ºC flow temperature.



• 60ºC output temperature for heating and/or domestic hot water• Low noise 52dBA, when positioned externally or internally• Optional ducting kit for internal positioning• Twin circuit providing heating or cooling and also DHW outputs• Simultaneous heating and cooling outputs with 100% heat

recovery• Inverter driven providing flexibility in application and performance



r HFCR-410A

AXIAL

• Expansion module for additional heating circuits• Additional heating zone controllers• Expansion module for solar thermal collector• Ducting kit for Internal Positioning

Main Accessories

24



Residential Heat Pumps

external internal

Unit Description

• The new 60ºC DeLonghi Professioanl i-NRG Inverter air source heat pump provides exactly the energy required bythe distribution system within the property at any time.

• The integrated controller accurately follows the actual load of the buildingutilising a modulating DC inverter source fan and modulating circulation pumps in order to maximise performance.

• i-NRG is the new generation heat pump for all year round operation in any operating mode: single cycle (air conditioning, heating, domestic hot water)as well as combined cycle (simultaneous heating or DHW and cooling).

• Domestic hot water production is provided by a dedicated heat exchangerfor high temperature heat recovery providing partial or 100% free domestic hot water production. The unit can be installed internally (ducted) or externally, ensuring complete flexibility to match the demandsof each application.

• Designed to operate in ambient temperatures as low as -20ºC the i-NRG range is more than capable of operating with high efficiency in UK & Irishwinter temperatures.

• The new Climaveneta NADI integrated electronic controller provides a highlevel of application flexibility and functionality.

• The remote keyboard kit with wired indoor and outdoor temperature sensors allows dynamic control of delivered water temperature, this ensures full optimisation of comfort within the property and increases overall energy efficiency.

+ Single heating zone control for radiator, underfloor or fan coil+ Multiple heating zone control available via optional expansion module+ Solar thermal control via optional extension module+ Remote temperature sensor for accurate weather compensated

performance+ Anti-legionella cycle control for DHW cylinder+ Bi-valent control for additional heat source

• DeLonghi-Climaveneta units are high specification heat pumps which arebuilt to exacting standards with regard to efficiency and functionality. Allthe units are European manufactured and benefit from the DeLonghi-Climaveneta approach to product development and quality managementproviding the complete package that would be expected from a premier manufacturer.

r HFCR-410A

AXIAL

i-NRG Air Source High Temperature Heat PumpsHIGH TEMPERATURE HEAT PUMP DESIGNATION MEANS THE UNIT IS DESIGNED TO DELIVER A 60ºC OUTPUT TEMPERATURE AT A -5ºC AMBIENT CONDITION

Features

i-NRG 0061 Single Phase 0061 Three Phase

Nominal Heating power kW 1 16.3 16.3 Total absorbed power kW 2 4 4 COP 3.91 3.94 Cooling capacity kW 3 19.6 19.7 Total absorbed power kW 2 5.4 5.4 EER 3.62 3.66 Cooling capacity with total recovery kW 4 17.9 18 Total absorbed power kW 4 4.9 4.9 Recovery heating capacity kW 4 22.6 22.6 Compressor type SCROLL INVERTER DC No. Compressors N. 1 1 Refrigerant R410A kg 6.55 6.55 No. fans N. 1 1 Air Flow m3/h 8000 8000 Useful head Pa 60 60 Plant side pump type 5 i-Ci i-Ci Recovery side pump type 5 i-Ci i-Ci Max system and DHW pressure water side kPa 250 250 System and DHW safety valve kPa 300 300 Heat pump circuit expansion vessel l 10 10 Electrical power supply V-Ph~Hz 230-1~50 400-3N~50 Sound power dB(A) 6-9 68 68 Sound pressure level dB(A) 7-9 52 52Length mm 8 750 750 Length mm 9 1535 1535 Height mm 1600 1600 Width mm 1050 1050 System hydraulic connections inch 1"1/4 1"1/4 DHW hydraulic connections inch 1"1/4 1"1/4 Operational weight kg 260 260

Note:

• Structure and base coated in hot galvanised epoxy powder coated steel• DC Inverter Scroll Compressor• Stainless steel (AISI 316) with high efficiency and low pressure drop plate to plate exchanger

(domestic hot water side), positioned directly after the compressor ensuring efficient domestic hot water production, operating in either full recovery or partial heat recovery.

• Plant side plate heat exchanger stainless steel AISI 316 with high efficiency and low pressuredrop meets the supply of both hot or cold water for the property. Regardless of the domestichot water demand the DC inverter scroll compressor will adjust to meet demand.

• Electronic expansion valve and NADI controller• Finned coils made with copper pipes and aluminium fins with large exchange surface area

(100% fully quality tested)• Axial DC Inverter Source Fan housed in aerodynamic conveyor profile with safety grill• Low external air temperature device provides continuous fan speed regulation via the

pressure switch• The water circuit is provided complete with:

+ Variable flow circulating pump plant side+ Variable flow circulating pump domestic hot water side+ Expansion tank+ Safety valve+ Pressure gauge+ Manual filling assembly


HEATING + DOMESTIC HOT WATER

Partial or 100% heat recovery available in simultaneous cooling & heating mode

HEATING + AIR CONDITIONING

1. Water in-out 30/35°C (plant side), outdoor air temperature 7°C b.s./ 6°C 2. Total input is obtained from compressor input and fan input. 3. Water in-out 23/18°C (plant side), outdoor air temperature 35°C b.s. 4. Water in-out 23/18°C (plant side), water in-out 45/50°C (total recovery side)

5. i-Ci= Brushless DC pump6. Sound Pressure level according to ISO 9614 and Eurovent 8/17 Average Sound Pressure level above one reflecting surface (Q=2) at 1 metre8 Indoor Installation9 Outdoor Installation

1600

1050

750

1535

25


MODULAR CAPABILITY

The i-NRG range is designed for modular application to accommodate multi unit larger capacity requirements***.



ICS Renewable Energy Ltd (T/A ICS Heat Pump Technology) and/or Climaveneta S.p.A (DeLonghi) reserve the right to change update or alter the specification & details of any item shown with or without prior notice for whatever reason. The information provided withinthe product guide and/or data sheets is intended for guidance purposes only, please confirm actual current specification and equipment details at point of quotation and/or order.

Prana HT26

COOLINGCOOLINGCOOLINGHEATINGHEATINGHEATING HOT WATERHOT WATERHOT WATER MODULARMODULARMODULARUnit Description

The Climaveneta Prana HT range represents the next generation ofcommercial air source heat pumps with an output temperature of 65ºC.Unlike medium temperature heat pumps these units are able to providean output of 65ºC in ambient temperatures as low as -12ºC with aminimum operating temperature of -20ºC.

• This Climaveneta Prana HT range of air source heat pumps provides anextremely high level of performance and a high level of specificationwhich makes them ideal for either new build or retrofit applications within the commercial sector.

• The specifier can choose to carry out a minimal amount of modifications to an existing heating system when applying a 65°C Prana HT to a retrofit application and as a result can potentially achievesignificant installation benefits in terms of cost & time savings when replacing existing Oil or Gas fired boilers.

• The nominal refrigeration COP* (efficiency) of these units is very highaveraging over 4.2 but importantly the performance of these units inreducing ambient temperatures is also at an extremely high level.

• Designed to operate in ambient temperatures as low as -20ºC the PranaHT range is more than capable of operating with high efficiency in UK& Irish winter temperatures.

• These units incorporate a complete control system for prioritised sanitary hot water production along with full weather compensated heating controls. This allows the unit to function efficiently as either amedium or high temperature heat pump with prioritised 65ºC sanitaryhot water production (a reversible option for chilled water productionis also available).

• This advanced control means that these units are able to operate withvery low system volumes which reduces buffer tank size and can considerably reduce installation costs.

• These DeLonghi-Climaveneta units are high specification heat pumps which are built to exacting standards with regard to efficiency and functionality. All the units are European manufactured and benefit fromthe DeLonghi-Climaveneta approach to product development and quality management providing the complete package that would be expected from a premier manufacturer.

Unit Summary

MTD UNITS: AW HT

CAPACITY: 40kW-100kW


These units provide heating and hot water up to 65ºC outputtemperatures with a reversible cooling option also available.


*Average coefficient of performance (COP) for the Prana HT range (LN-CA) based onEN14511 conditions.

Average COP 3.6 (360% efficient) @ 7ºC ambient & 45ºC flow temp.



• 65°C operation at -12°C ambient temperature • Prioritised 65ºC sanitary hot water production (100% duty)• Weather compensated heating control (max 65ºC output)• Reversible unit also available• Multiple unit capability for parallel operation• High COP 4.20• MSC accredited heat pumps (relevant models)• Maximum defrost efficiency• Minimum design operating temperature -20°C

*Please note that this unit is capable of providing a maximum output temp of 65°C, theunit will provide this output temperature for heating only at the times of year where it isnecessary. ie: The weather compensation control incorporated within the unit will providecorrespondingly lower output temperatures to match external ambient temperatures,therefore providing a high seasonally corrected Coefficient of Performance.


***modularcapability



r HFCR-410A

AXIAL

r HFCR-410A

AXIAL

Prana HT Commercial Air Source High Temperature Heat PumpsHIGH TEMPERATURE HEAT PUMP DESIGNATION MEANS THE UNIT IS DESIGNED TO DELIVER A 60ºC OUTPUT TEMPERATURE AT A -5ºC AMBIENT CONDITION

27

Main Components

AW HT 0122CA 0122LN-CA 0152CA 0152LN-CA 0202CA 0202LN-CA 0262CA 0262LN-CA 0302CA 0302LN-CA

Pt (1) (kW) 37.6 38.0 50.6 50.2 67.9 68.5 83.7 84.7 100.7 99.0

Pa (1) (kW) 8.9 8.9 12.2 12.1 16.3 16.4 19.9 20.0 23.2 23.0

COP (1) 4.22 4.27 4.15 4.14 4.17 4.18 4.21 4.24 4.34 4.30

COP EN14511:3 (1) 4.21 4.25 4.13 4.12 4.14 4.15 4.17 4.20 4.30 4.27

Pt (2) (kW) 38.0 38.4 51.3 51.0 68.8 69.4 84.9 85.8 102.0 100.3

Pa (2) (kW) 10.7 10.7 14.4 14.3 19.4 19.4 23.6 23.7 27.7 27.6

COP (2) 3.55 3.59 3.57 3.56 3.55 3.58 3.60 3.62 3.68 3.63

Pf (3) (kW) 34.1 34.0 43.8 43.8 60.3 60.2 76.4 76.2 91.6 90.3

Pa (3) (kW) 11.5 11.6 14.7 15.0 20.4 20.5 25.9 26.1 31.3 32.9

EER (3) 2.97 2.93 2.98 2.93 2.96 2.94 2.95 2.92 2.93 2.74

Sound Power level dB(A) 84 80 86 82 87 83 87 83 87 84

Sound Pressure Level dB(A) 52 49 54 51 55 51 55 51 55 52

Circuits 2 2 2 2 2 2 2 2 2 2

Length 1695 1695 2195 2195 2745 2745 2745 2745 2745 2745

Width 1120 1120 1120 1120 1120 1120 1120 1120 1120 1120

Height 1420 1420 1420 1420 1420 1420 1620 1620 1620 1620


• High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with anti-freeze heating element and differential pressure switch

• High efficiency cycle EVI Hermetic Scroll Compressor (with hot gas direct injection into the compressor) to reach 65°C, with the crankcase heater and thermal protection

• Condensers finned tubes with copper and aluminium fins high exchangesurface (100% fully quality tested)

• Axial electric fans, external rotor, electric motor with a 6-pole fitted with thermal protection, housed in aerodynamic conveyor profile with safety grill

• A condense collecting tray within water discharge

• Outside air sensor wired

• Remote internal keyboard kit wired (optional)

• The electronic board PRO EXTENDED allows for control of:- circulation pump on system side- domestic hot water control by external Y Plan three-way valve (accessory)- outdoor temperature sensor for modulating set point weather compensation

NB: Optional equipment includes a range of tanks & cylinders plus hydronic kits, see current price list or contact ICS HPT or your distributor for details.

W3000

The W3000 controller offers the latest control and operating functions developed directly by Climaveneta utilising their experience gained withinthe field of heat pump design and related plant engineering. The keypad is generously sized with a full operating status display, the controls anddetailed LCD make access to machine settings easy and safe. Temperature regulation with a proportional logic capability is related to the returnwater temperature which provides the ability to satisfy simultaneously heating, sanitary hot water and cooling requests with no need for modechangeover. The diagnostics include full management of alarms with black box function and an alarm recorder for analysis of unit performance.Monitoring is achieved through either Climaveneta devices or with various options for interfacing to ModBus, Bacnet or Echelon & LonTalk protocols. The controller has thecompatibility to operate with a remote keyboard (single controller management of up to 10 modular units) along with a full time clock function for efficient programming ofoperation (standard 4 days and 10 time bands). Exclusive self-adaptive defrost logic, monitoring multiple operational and ambient parameters are incorporated which allow theunit to reduce the number and duration of the defrost cycles with the benefit of increased overall energy efficiency.

Lw

H


Note:1. Heating 35ºC flow/7ºC ambient2. Heating 45ºC flow/7ºC ambient3. Cooling 12ºC/7ºC 35ºC ambient


MODULAR CAPABILITY

The Prana HT range is designed for modular application to accommodate multi unit larger capacity requirements***.


GROUND SOURCE& GEOTHERMALHEAT PUMPS

28

Unit & Capacity

BWR MTD5-43kWpg 30-31

Residential

Hot Water

Heating SimultaneousHeating/ Hot Water

Cooling(Optional)


Hot Water/Heating

Heat Recovery

ReducedCarbon

Emissions

LowerHeatingCosts

GROUND SOURCE/GEOTHERMAL HEAT PUMPS

HOT WATERHOT WATERHOT WATER HEATINGHEATINGHEATING COOLINGCOOLINGCOOLING

DHW Twin5-40kWpg 32-33


HOT WATERHOT WATERHOT WATER HEATINGHEATINGHEATING HEATINGHEATINGHEATINGHEATING +HEATING +HOT WATERHOT WATERHEATING +HOT WATER COOLINGCOOLINGCOOLING COOLINGCOOLINGCOOLING


HOT WATERHOT WATERHOT WATER HEATINGHEATINGHEATINGHEATING +HEATING +HOT WATERHOT WATERHEATING +HOT WATER COOLINGCOOLINGCOOLING


Prana MTD40-360kW

pg 34-35

Commercial


Modular

Prana DHW40-360kW

pg 36-37

Commercial

HEATINGHEATINGHEATING COOLINGCOOLINGCOOLING MODULARMODULARMODULAR

29

A full range of ground collectors are provided by ICS-DeLonghi-Climaveneta tomatch each ground source/geothermal heat pump range. The package of groundcollector and manifolds is wide ranging encompassing:

1. PE or PEX geothermal pipe work

2. A complete selection of manifolds

3. Ground loop Thermal Fluids incorporating inhibitor & glycol protection

4. Ancillary ground source/geothermal equipment & sundry items

GROUND SOURCE HEAT PUMPSHeat energy is collected from the ground at a depth of 1.2 metresusing horizontal collectors and is transferred via the heat pump ashigh grade heat into the building.

GROUND SOURCE HEAT PUMPSICS Heat Pump Technology provides the complete range ofDeLonghi-Climaveneta ground source heat pumps. This range ofunits allows the selection of the most efficient ground source heatpump to match the requirements of each project.

GEOTHERMAL HEAT PUMPSThis range of units allows the selection of the most efficientgeothermal heat pump to match the requirements of each project.

Co-efficient’s of performance in excess of 4.5 (1kW of electricalpower gives 4.5kW of heat energy out) can be achieved in theoperating conditions experienced within the UK & Ireland.

GEOTHERMAL HEAT PUMPSICS Heat Pump Technology provides the complete range ofDeLonghi-Climaveneta geothermal heat pumps. This range of unitsallows the selection of the most efficient geothermal heat pump tomatch the requirements of each project.

GROUND COLLECTORS/MANIFOLDS


BWR-MTD

HEATINGHEATINGHEATING COOLINGCOOLINGCOOLING HOT WATERHOT WATERHOT WATER


Unit Description

The DeLonghi Professional BWR MTD ground source & geothermal heatpump ranges are able to provide heating or cooling and domestic hotwater whilst providing a high level of specification with the benefit ofvalue and efficiency.

• These units incorporate a built in heating system circulation pump, a built in source pump to function with horizontal or vertical collectors. Full control for hot water production including Y Plan valveoperation is also incorporated along with full weather compensationoptions, also the units are able to function with any Heat Pump optimised thermal store or cylinder.

• The modulating source pump controls efficiency and maximises theperformance on part loads by drawing the correct amount of sourcewater through the unit to match the load requirement of the property at any time.

• This advanced control means that these units are able to operate with very low system volumes, a minimum open circuit volume of 3.5 litres per nominal kW of Heat Pump capacity is required which can remove the need for buffer tanks and secondary pumps hencereducing installation costs considerably.

• The high specification standard of the BWR/WWR MTD range provides a high specification unit with efficient performance in a practical and cost effective functional package.

• These DeLonghi-Climaveneta units are high specification heat pumpswhich are built to exacting standards with regard to efficiency and functionality. All the units are European manufactured and benefit from the DeLonghi-Climaveneta approach to product development and quality management providing the complete package that would be expected from a premier manufacturer.

Unit Summary

MTD UNITS: WW/WWR & BW/BWR

CAPACITY: 5kW-43kW


These units provide heating and hot water up to 55°C with theoption to also provide heating and cooling.

HIGH EFFICIENCY & PERFORMANCE:

COP 4.28 (428% efficient)

BWR MTD source flow temperature 0ºC/-3ºC & output flow temp 35ºC*

COP 5.52 (552% efficient)WWR MTD source flow temperature 5ºC/10ºC & output flow temp 35ºC*

*Average COP for the BWR & WWR MTD ranges



• MSC accredited heat pumps, certificate HP0005 • Full DHW and heating control• Heating only or reversible Heat Pump• Built in plant and circulation pump• High value and high performance• 55ºC output temperature


*(COP is shown without circulation pump input power. Please note that unlike mostother heat pumps these units incorporate built in circulation pumps, therefore by notincluding the circulation pump input power we are able to provide a direct performancecomparison with other units).

30


r HFCR-410A

AXIAL

r HFCR-410A

AXIAL

BWR-MTD Ground Source & Geothermal Heat Pumps

BWR MTD 0011 0021 0025 0031 0041 0021 0025 0031 0041 0051 0061 0071 0091 0101 0121MS MS MS MS MS T T T T T T T T T T

Nominal heating power (1) kW 5.40 5.90 7.30 9.20 11.7 5.90 7.50 9.10 12.2 13.7 16 19.8 23 26.5 33.3Total absorbed power (2) kW 1.34 1.50 1.82 2.35 2.80 1.40 1.74 2.10 2.80 3.40 3.50 4.40 4.90 5.80 7.30COP * 4.03 3.93 4 3.92 4.18 4.21 4.31 4.33 4.36 4.03 4.57 4.50 4.69 4.57 4.56Cooling capacity (3) kW 7.10 7.60 9.80 12 15.1 7.60 9.50 12 15.7 18 21.3 26.9 30.7 34.8 44.8Total absorbed power (2) kW 1.60 1.70 1.96 2.53 3.27 1.60 1.84 2.50 3.30 3.70 4.10 5.15 5.95 7 8.80EER * 4.44 4.47 5 4.74 4.62 4.75 5.16 4.80 4.76 4.86 5.20 5.22 5.16 4.97 5.09Heating capacity (4) kW 5.20 5.70 7.10 9 11.3 5.70 7 8.70 11.8 12.9 15.2 18.8 21.8 25.1 31.9Total absorbed power (2) kW 1.70 1.90 2.30 3 3.60 1.90 2.20 2.70 3.70 4.10 4.40 5.60 6.20 7.40 9COP * 3.06 3 3.09 3 3.14 3 3.18 3.22 3.19 3.15 3.45 3.36 3.52 3.39 3.54Cooling capacity (5) kW 5.20 5.60 7.20 8.80 11.3 5.60 7.30 8.90 11.8 13.2 15.7 19.8 22.9 26 33.4Total absorbed power (2) kW 1.53 1.70 2 2.60 3.20 1.63 1.90 2.41 3.19 3.80 4 5.10 5.80 6.80 8.40EER * 3.40 3.29 3.60 3.38 3.53 3.44 3.84 3.69 3.70 3.47 3.93 3.88 3.95 3.82 3.98ESEER 4.03 3.73 4.26 3.95 3.90 3.97 4.54 4.33 4.08 3.92 4.51 4.40 4.61 4.33 4.37Compressor type SCROLLN. Compressors N. 1Refrigerant R410APlant side pump type (6) Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ce Ce Ce CeSource side pump type (6) Ci Ci Ci Ci Ce Ci Ci Ci Ce Ce Ce Ce Ce Ce CeElectrical power supply V-Ph~Hz 230-1~50 400-3N~50Start-up current A 26 27 37 44 59 32 35 48 64 64 75 95 111 118 140Sound power (7) dB(A) 52 52 53 53 58 52 52 52 58 58 59 66 66 70 70Sound pressure (8) dB(A) 38 38 39 39 44 38 38 38 44 44 45 51 51 55 55Length mm 560 560 560 560 560 560 560 560 560 560 560 680 680 680 680Height mm 980 980 980 980 980 980 980 980 980 980 980 1150 1150 1150 1150Width mm 575 575 575 575 575 575 575 575 575 575 575 780 780 780 780Operational weight kg 148 148 150 152 160 148 150 152 160 170 175 220 230 235 25

WWR MTD 0011 0021 0025 0031 0041 0021 0025 0031 0041 0051 0061 0071 0091 0101 0121M M M M M T T T T T T T T T T

Nominal Cooling capacity (1) kW 5.20 5.60 7.20 8.80 11.3 5.60 7.30 8.90 11.8 13.2 15.7 19.8 22.9 26 33.4Total power input (1) kW 1.50 1.70 2 2.60 3.20 1.60 1.90 2.40 3.20 3.80 4 5.10 5.80 6.80 8.40EER 3.47 3.29 3.60 3.38 3.53 3.50 3.84 3.71 3.69 3.47 3.93 3.88 3.95 3.82 3.98ESEER 4.03 3.73 4.26 3.95 3.90 3.81 4.39 4.17 4.08 4.02 4.51 4.40 4.61 4.33 4.37Water flow rate plant side (1) m3/h 0.90 1 1.20 1.50 1.90 1 1.30 1.50 2 2.30 2.70 3.40 3.90 4.50 5.70Heating capacity (2) 6.80 7.50 9.20 11.6 14.6 7.40 9.20 11.4 15.3 17.1 20 24.8 28.8 33 41.7Total absorbed power (2) kW 1.70 1.90 2.30 3 3.60 1.90 2.20 2.70 3.70 4.20 4.60 5.80 6.40 7.60 9.50COP 4 3.95 4 3.87 4.06 3.89 4.18 4.22 4.14 4.07 4.35 4.28 4.50 4.34 4.39Water flow rate plant side (2) 1.20 1.30 1.60 2 2.50 1.30 1.60 2 2.60 2.90 3.40 4.30 5 5.70 7.20Absorbed current A 7.50 8 8.90 12.3 15.6 4.60 5 6.10 7.40 8.10 8.80 12.2 13.4 16.1 19.2Operational weight kg 148 148 150 152 160 148 150 152 160 170 175 220 230 235 250Compressor type SCROLLRefrigerant R410AHydraulic connections inches G3/4” G3/4” G3/4” G3/4” G1”1/4 G3/4” G3/4” G3/4” G1”1/4 G1”1/4 G1”1/4 G1”1/4 G1”1/4 G1”1/4 G 1”1/4Sound pressure level (3) dB(A) 41 41 42 42 47 41 42 42 47 47 48 55 55 59 59Sound power dB(A) 52 52 53 53 58 52 53 53 58 58 59 66 66 70 70Electrical power supply V-Ph~Hz 230V~50Hz 400V-3N~50HzLength mm 560 560 560 560 560 560 560 560 560 560 560 680 680 680 680Height mm 980 980 980 980 980 980 980 980 980 980 980 1150 1150 1150 1150WIdth mm 575 575 575 575 575 575 575 575 575 575 575 780 780 780 780

Note: BWR MTD1. Condenser water in-out 30/35°C (plant side), Evaporator water in-out 0/-3°C (source side)2. According to Eurovent3. Evaporator water in-out 23/18°C (plant side), Condenser water in-out 30/35°C (source side)4. Condenser water in-out 40/45°C (plant side), Evaporator water in-out 0/-3°C (source side)5. Evaporator water in-out 12/7°C (plant side), Condenser water in-out 30/35°C (source side)6. Ci=Circulator; Ce=Centrifugal7. Sound power level according to ISO 9614 and Eurovent 8/18. Average sound pressure level above one reflecting surface (Q=2) at 1 meter from the outside

dimensions of the unit.*According to the Eurovent standard without circulation pump input power.

Note: WWR MTD1. Evaporator water (in/out) = 12/7°C, condenser water

(in/out) = 30/35°C, based on Eurovent Standard2. Evaporator water (in/out), 10/5°C, condenser water

(in/out) 40/45°C, based on Eurovent standard3. Sound pressure measured at 1 m in open field conditions

Main Components

• Housing and base are made from hot-galvanized epoxy powder coated sheet metal• Case panels are insulated within low noise material for further improvement of

silence• Hermetic scroll compressors with oil sump heater and electronic overheating

protection with centralised manual reset• The water circuit is complete with:

- variable flow water pump (system side) & variable flow source pump- source side modulating valve for models WWR (water source units), this will switch off the water flow whenever the compressor is not in operation.

- differential pressure switch on source side and system side- expansion vessel (Heat Pump circuit only)- safety valve- manual filling assembly

- pressure gauge- manual air vent valve

• Heat exchangers on the system and source side are brazed plate models in AISI 316 stainless steel providing high efficiency and a low pressure drop, complete with vapour barrier closed-cell heat insulation

• Soft start for 230V/1/50Hz (45 amps)• The electronic menu allows control of:

- plant and Geothermal ground circuits (BWR) / modulating valve (WWR)- domestic hot water production by control of an external three-way valve (Y Plan)- a zone of direct heating- external heating source- weather compensation (sensor is accessory)


L w

D

31


DHW Twin

WITH HEAT RECOVERY

Unit Description

The DeLonghi Professional BWR DHW are a unique range of commercial groundor water source heat pumps which are capable of providing a high efficiencycombination of output conditions:

• Heating only• Simultaneous heating and hot water to 55ºC. • Hot water only• Cooling only• Simultaneous cooling and hot water with up to 100% heat recovery• Simultaneous cooling and heating with up to 100% heat recovery

• These units can be specified to suit a particular application and due to theirability to provide two simultaneous outputs they are able to provide real benefits on both residential and commercial applications.

• Within the commercial sector these heat pumps provide flexibility and realenvironmental benefits. As an alternative to conventional VRF systems these units remove all of the refrigerant from within a building and therefore significantly remove the potential for refrigerant leakage therefore complying completely with the objectives of the F Gas regulations.

• Also when operating on a split heating/hot water and air conditioning loadthese heat pumps will provide up to 100% heat recovery which then benefits the user with free heating or hot water.

• A growing demand for energy and heat recovery has created a highly efficient requirement to use these units to recover waste energy from wastewater or fluid flows, recovering energy from cooling towers or waste waterflows is easily achievable when utilising these units in heat recovery specification.

• Also these heat pump units will provide up to 100% duty on either primaryor secondary heat exchangers along with the ability to provide a combination of load capability heating and hot water simultaneously or heating and cooling simultaneously with up to 100% heat recovery. This allows the heat pump units to provide this simultaneous output feature to manage seasonal heating and cooling loads from the same heat pump unit.

• These DeLonghi-Climaveneta units are high specification heat pumps whichare built to exacting standards with regard to efficiency and functionality. Allthe units are European manufactured and benefit from the DeLonghi-Climaveneta approach to product development and quality management providing the complete package that would be expected from a premier manufacturer.

Unit Summary

DHW TWIN UNITS: WW/WWR & BW/BWR

CAPACITY: 5kW-40kW


These units provide simultaneous supplies of domestic hot waterand heating/air conditioning.


COP 3.56 (356% efficient)BWR DHW source flow temperature 0ºC/-3ºC & output flow temp 35ºC*

COP 4.57 (457% efficient)WWR DHW source flow temperature 5ºC/10ºC & output flow temp 35ºC*

*Average COP for the BWR & WWR DHW ranges


FEATURES & OPERATIONAL BENEFITS:• Fully self-contained unit – no external refrigerant pipes• Incorporates source and circulation pumps as standard• Highly efficient and flexible design with easy to use controls• Heating, cooling and domestic hot water provided• Suitable for large capacity hot water users and simultaneous

heating & air conditioning applications*(COP is shown without circulation pump input power. Please note that unlike most other heatpumps these units incorporate built in circulation pumps, therefore by not including the circulationpump input power we are able to provide a direct performance comparison with other units).

Note:

L w

D

32





1. Heating mode: Plant side inlet water temperature at 30°C and outlet at 35°C, Source side inlet water temperature at 10°C and outlet at 5°C

2. Operation recovery plant side inlet water temperature at 45°C and outlet at 50°C, Source side inlet water temperature at 10°C and outlet at 5°C

3. Cooling mode: Plant side inlet water temperature at 23°C and outlet at 18°C, Source side inlet water temperature at 30°C and outlet at 35°C

4. Cooling mode: Plant side inlet water temperature at 12°C and outlet at 7°C, Source side inlet water temperature at 30°C and outlet at 35°C

5. Heating mode: Plant side inlet water temperature at 30°C and outlet at 35°C, Source side inlet water temperature at 0°C and outlet at -3°C (Gly 25%)

6. Funzionamento in recupero: Plant side inlet water temperature at 45°C and outlet at 50°C, Source side inlet water temperature at 0°C and outlet at -3°C (Gly 25%)

7. Standard unit data - DHW/S model with soft starter for 230V/1/50Hz

8. Sound pressure at 1 meter distance from the external surface of the unit, free field.

*According to the Eurovent standard without circulation pump input power.

r HFCR-410A

AXIAL

r HFCR-410A

AXIAL



HEATING + DOMESTIC HOT WATER

Partial or 100% heat recovery available in simultaneous cooling & heating mode

HEATING + AIR CONDITIONING

DHW Twin Ground Source & Geothermal Heat Pumps

Main Components

• Housing and base are made from hot-galvanized epoxy powder coated sheet metal• Case panels are insulated within low noise material for noise reduction• Hermetic scroll type compressors, equipped with the crankcase heater and thermal protection• Primary stainless steel (AISI 316) plate heat exchanger with high efficiency and low pressure drop (providing domestic hot

water or heating)• When combined with the secondary heat exchanger (cooling duty) these units will provide either full or partial heat recovery• High efficiency and low pressure drop stainless steel (AISI 316) source side plate heat exchanger for efficient heat transfer

and maximum performance.• The water circuit comes complete with:

- Primary heat exchanger circulation pump for domestic hot water or heating circuit- Secondary heat exchanger circulation pump for heating or cooling circuit- Ground source/Geothermal pump for the BWR model- differential pressure switch on source side and system side- expansion vessel (Heat Pump circuit only)- safety valve (6 bar)- manual filling assembly- pressure gauge- venting and draining valve

• Soft start for 230V/1/50Hz units - WWR BWR DHW/SNB: Optional equipment includes a range of tanks & cylinders plus standard installation packs, see current price list or contactICS HPT or your distributor for details.packs, see current price list or contact ICS HPT or your distributor for details.

33

BWR DHW 0011 0021 0025 0031 0041 0021 0025 0031 0041 0051 0061 0071 0091 0101 0121MS MS MS MS MS T T T T T T T T T T

Nominal heating power (1) kW 4.50 5.70 6.70 7.80 9.70 5.60 6.60 7.70 9.50 11.4 13.9 18.8 21.2 24.4 29.7Total absorbed power (2) kW 1.30 1.60 1.90 2.30 2.80 1.60 1.90 2.20 2.70 3.20 3.70 5.10 5.60 6.60 8.30COP 3.44 3.45 3.48 3.39 3.51 3.50 3.51 3.44 3.56 3.57 3.72 3.70 3.81 3.72 3.57Cooling capacity (3) kW 7.30 9.20 11 12.5 15.3 9.20 10.9 12.4 15.4 19.1 22.5 30.2 34.4 38.9 49.7Total absorbed power (2) kW 1.30 1.70 2 2.40 2.90 1.60 1.90 2.30 2.80 3.60 4.10 5.50 6.10 7.30 9.30EER 5.62 5.41 5.50 5.21 5.28 5.75 5.74 5.39 5.50 5.31 5.49 5.49 5.64 5.33 5.34Total absorbed power (4) kW 6 7.80 9.20 10.3 12.9 7.70 9.10 10.3 13.1 16 18.9 25.5 29 32.7 41.1Total absorbed power kW 1.90 2.40 2.90 3.40 4.20 2.30 2.80 3.30 4 4.90 5.70 7.70 8.40 10.2 12.8Recovery heating capacity (4) kW 7.90 10 11.9 13.5 16.8 9.90 11.7 13.4 16.9 20.6 24.2 32.7 36.9 42.4 53.1Heating capacity (5) kW 4.30 5.50 6.60 7.70 9.40 5.40 6.50 7.50 9.30 11.1 13.3 17.9 20.5 23.5 28.4Total absorbed power (2) kW 1.70 2.10 2.50 3 3.50 2 2.40 2.90 3.40 4 4.70 6.50 7 8.30 10.5COP 2.60 2.63 2.64 2.59 2.69 2.67 2.67 2.63 2.75 2.78 2.86 2.77 2.95 2.84 2.69Cooling capacity (6) kW 5.10 6.50 7.70 8.90 11 6.50 7.70 8.80 10.9 13.4 16.1 21.7 24.6 28 34.8Total absorbed power (2) kW 1.30 1.70 2 2.40 2.90 1.70 2 2.30 2.80 3.40 4 5.40 5.90 7 8.90EER 3.92 3.82 3.85 3.71 3.79 3.82 3.85 3.83 3.89 3.94 4.03 4.02 4.17 4.00 3.91Compressor type SCROLLN. Compressors N. 1Refrigerant R407CPlant side pump type (7) Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ce Ce Ce CeRecovery side pump type (7) Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci CiSource side pump type (7) Ci Ci Ci Ci Ce Ci Ci Ci Ce Ce Ce Ce Ce Ce CeElectrical power supply V-Ph~Hz 230-1~50 400-3N~50Start-up current A 21 27 34 45 51 32 40 46 50 66 74 95 111 118 140Sound power (8) dB(A) 52 52 53 53 58 52 52 52 58 58 59 66 66 70 70Sound pressure (9) dB(A) 38 38 39 39 44 38 38 38 44 44 45 51 51 55 55Length mm 560 560 560 560 560 560 560 560 560 560 560 680 680 680 680Height mm 980 980 980 980 980 980 980 980 980 980 980 1150 1150 1150 1150Width mm 575 575 575 575 575 575 575 575 575 575 575 780 780 780 780Operational weight kg 188 188 190 195 215 188 190 195 215 228 233 260 270 280 305

WWR DHW 0011 0021 0025 0031 0041 0021 0025 0031 0041 0051 0061 0071 0091 0101 0121MS MS MS MS MS T T T T T T T T T T

Nominal heating power (1) kW 6 7.60 9 10.5 12.9 7.50 8.90 10.3 12.7 15.6 18.7 25.3 28.4 32.6 40.5Total absorbed power (2) kW 1.30 1.70 2 2.40 2.90 1.70 2 2.30 2.80 3.40 3.90 5.30 5.90 6.90 8.80COP 4.49 4.48 4.51 4.36 4.50 4.55 4.58 4.44 4.57 4.58 4.75 4.73 4.84 4.69 4.59Cooling capacity (3) kW 7.30 9.20 11 12.5 15.3 9.20 10.9 12.4 15.4 19.1 22.5 30.2 34.4 38.9 49.7Total absorbed power (2) kW 1.30 1.70 2 2.40 2.90 1.60 1.90 2.30 2.80 3.60 4.10 5.50 6.10 7.30 9.30EER 5.62 5.41 5.50 5.21 5.28 5.75 5.74 5.39 5.50 5.31 5.49 5.49 5.64 5.33 5.34Total absorbed power (4) kW 6 7.80 9.20 10.3 12.9 7.70 9.10 10.3 13.1 16 18.9 25.5 29 32.7 41.1Total absorbed power kW 1.90 2.40 2.90 3.40 4.20 2.30 2.80 3.30 4 4.90 5.70 7.70 8.40 10.2 12.8Recovery heating capacity (4) kW 7.90 10 11.9 13.5 16.8 9.90 11.7 13.4 16.9 20.6 24.2 32.7 36.9 42.4 53.1Heating capacity (5) kW 5.60 7.20 8.50 9.90 12.2 7.20 8.60 9.90 12.3 14.9 17.9 24 27.1 31.1 38.3Total absorbed power (2) kW 1.70 2.20 2.60 3.10 3.60 2.10 2.50 3 3.50 4.30 4.90 6.80 7.30 8.70 11.1COP 3.33 3.35 3.37 3.28 3.40 3.41 3.42 3.34 3.48 3.50 3.62 3.55 3.69 3.55 3.45Cooling capacity (6) kW 5.10 6.50 7.70 8.90 11 6.50 7.70 8.80 10.9 13.4 16.1 21.7 24.6 28 34.8Total absorbed power (2) kW 1.30 1.70 2 2.40 2.90 1.70 2 2.30 2.80 3.40 4 5.40 5.90 7 8.90EER 3.92 3.82 3.85 3.71 3.79 3.82 3.85 3.83 3.89 3.94 4.03 4.02 4.17 4.00 3.91Compressor type SCROLLN. Compressors N. 1Refrigerant R407CPlant side pump type (7) Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ce Ce Ce Ce CeRecovery side pump type (7) Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci Ci CiElectrical power supply V-Ph~Hz 230-1~50 400-3N~50Start-up current A 21 27 34 45 51 32 40 46 50 66 74 95 111 118 140Sound power (8) dB(A) 52 52 53 53 58 52 52 52 58 58 59 66 66 70 70Sound pressure (9) dB(A) 38 38 39 39 44 38 38 38 44 44 45 51 51 55 55Length mm 560 560 560 560 560 560 560 560 560 560 560 680 680 680 680Height mm 980 980 980 980 980 980 980 980 980 980 980 1150 1150 1150 1150Width mm 575 575 575 575 575 575 575 575 575 575 575 780 780 780 780Operational weight kg 188 188 190 195 215 188 190 195 215 228 233 260 270 280 305

Prana BWR-MTD

REVERSIBLE HEAT PUMP FOR INDOOR INSTALLATION 40KW - 360KW

Unit Description

• Optimised internally positioned heat pump unit with optional chilled water production, a complete range is available from 40kW-360kW operating through varying source temperature ranges to facilitate either ground source or water source operation.

• The range includes single-circuit/two-compressor versions and also twincircuit/four compressor versions for larger output capacity. This configuration provides excellent load management capability which giveshigh performance and efficiency along with associated contingency benefits and redundancy.

• The use of R410A enables the unit to operate with high efficiency and performance whilst remaining flexible in operation.

• Climaveneta has designed the Prana BWR MTD 0152-1204 units to be configured with a range of optional accessories for ease of operation whenspecified across a range of differing applications from ground water sourceto higher temperature heat recovery from process or production waste water.

• The built-in hydronic module includes the main water circuit components;it is available in various configurations with one or two pumps with high or low head both on the evaporator and the condenser side.

• The W3000 controller provides integrated single unit control but also allowsparallel operation of up to 5 units of varying capacity. This allows a completely bespoke system to be configured to match the demands of larger applications.

• The Prana BWR range is also able to connect either singularly or a multi unit modular basis with ModBus/Echelon/Bacnet protocol cards for BMScompatability

• These DeLonghi-Climaveneta units are high specification heat pumps which are built to exacting standards with regard to efficiency and functionality. All the units are European manufactured and benefit from the DeLonghi-Climaveneta approach to product development and qualitymanagement providing the complete package that would be expected from a premier manufacturer.

• The Prana HT range is designed for modular application to accommodate larger capacity requirements***.

Unit Summary

PRANA BWR MTD UNITS: WW/WWR & BW/BWR



These units provide a heating output to 55°C with the option toalso provide cooling with a reversible configuration.


COP 4.1 (410% efficient)**BWR MTD source flow temperature 0ºC/-3ºC & output flow temp 35ºC

COP 5.06 (506% efficient)**WWR MTD source flow temperature 5ºC/10ºC & output flow temp 35ºC

*Average COP for the Prana BWR & WWR MTD ranges

NOTE. Actual system efficiency (COP) and annual performance will depend on the distribution/emiitersystem utilised. Care should be taken to ensure that the heat pump is installed in order to provideefficient operational performance.


• Full DHW and heating control• Heating only or reversible heat pump• Built in plant and circulation pump• High value and high performance• 55ºC output temperature• Modular control for multiple unit configuration• Compact footprint for plant room positioning

34

COOLINGCOOLINGCOOLINGHEATINGHEATINGHEATING HOT WATERHOT WATERHOT WATER MODULARMODULARMODULAR

W3000The W3000 controller offers the latest control and operatingfunctions developed directly by Climaveneta utilising theirexperience gained within the field of heat pump design and relatedplant engineering. The keypad is generously sized with a fulloperating status display, the controls and detailed LCD make accessto machine settings easy and safe. Temperature regulation with a proportional logic capabilityis related to the return water temperature which provides the ability to satisfy simultaneouslyheating, sanitary hot water and cooling requests with no need for mode changeover. Thediagnostics include full management of alarms with black box function and an alarm recorder foranalysis of unit performance. Monitoring is achieved through either Climaveneta devices or withvarious options for interfacing to ModBus, Bacnet or Echelon & LonTalk protocols. The controllerhas the compatibility to operate with a remote keyboard (single controller management of upto 10 modular units) along with a full time clock function for efficient programming of operation(standard 4 days and 10 time bands). Exclusive self-adaptive defrost logic, monitoring multipleoperational- and ambient parameters are incorporated which allow the unit to reduce the numberand duration of the defrost cycles with the benefit of increased overall energy efficiency.


Prana BWR-MTD Ground Source & Geothermal Heat Pumps

BWR-MTD 0152 0182 0202 0252 0262 0302 0352 0412 0452 0512

Cooling capacity (1) kW 43.4 50.1 58.9 66.4 72.6 86.7 101 115 129 144

Total power input (1) kW 10.0 11.3 13.0 15.2 16.6 19.5 22.7 25.9 28.9 32.2

Condenser heating capacity (1) 5.8 60.7 71.2 80.7 88.2 105 123 139 156 174

EER 4.34 4.43 4.53 4.37 4.37 4.45 4.46 4.43 4.45 4.46

ESEER 5.80 6.00 6.00 5.70 5.60 5.70 5.80 5.70 5.80 5.80

Heating capacity (2) kW 50.5 58.2 68.0 77.0 85.0 101 117 132 148 165

Total power input (2) kW 12.9 14.3 16.7 19.2 21.1 24.7 28.7 32.2 36.0 40.0

COP (2) 3.91 4.07 4.07 4.01 4.03 4.09 4.07 4.10 4.12 4.14

No. Compressors/No. Circuits N. 2/1 2/1 2/1 2/1 2/1 2/1 2/1 2/1 2/1 2/1

Sound power (3) dB(A) 73 74 74 74 75 76 77 77 78 78

Sound pressure (4) dB(A)

Length (5) mm 1055 1055 1055 1055 1055 1222 1222 1222 1222 1222

Width (5) mm 649 649 649 649 649 843 843 843 843 843

Height (5) mm 1255 1255 1255 1255 1255 1496 1496 1496 1496 1496

Operating weight (5) kg 290 305 315 325 330 585 605 660 685 740

BWR-MTD 0552 0612 0604 0704 0804 0904 1004 1104 1204

Cooling capacity (1) kW 165 186 174 203 228 258 288 329 371

Total power input (1) kW 36.9 41.6 38.9 45.2 51.6 58.0 64.0 74.0 83.5

Condernser heating capacity (1) 200 225 211 245 276 312 348 398 450

EER 4.47 4.48 4.47 4.48 4.42 4.45 4.50 4.44 4.44

ESEER 5.90 5.80 5.80 5.90 5.80 5.90 5.90 6.00 5.90

Heating capacity (2) kW 190 215 202 234 263 297 332 379 428

Total power input (2) kW 45.9 51.8 49.2 56.6 64.1 72.1 79.5 91.9 104

COP (2) 4.14 4.14 4.11 4.13 4.10 4.12 4.17 4.13 4.12

No. Compressors/No. Circuits N. 2/1 2/1 4/2 4/2 4/2 4/2 4/2 4/2 4/2

Sound power (3) dB(A) 79 79 86 87 88 89 90 91 91

Sound pressure (4) dB(A)

Length (5) mm 1222 1222 2227 2227 2227 2227 2227 2227 2227

Width (5) mm 873 873 877 877 877 877 877 877 877

Height (5) mm 1496 1496 1780 1780 1780 1780 1780 1780 1780

Operating weight (5) kg 790 830 1090 1165 1245 1290 1395 1500 1585

Note:

1. Evaporator water (in/out) = 12/7°C, condenser water (in/out) = 30/35°C, based on Eurovent Standard.

2. Evaporator water (in/out) = 12/7°C; Condenser water (in/out) = 40/45°C.

3. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units.

4. Sound pressure in open field conditions on reflecting surface (directivity factor Q=2), average value on longest side, at 1 m from the outer surface and at 1 m height in relation to the unit supporting base.

5. Unit in standard configuration/execution, without optional accessories.

L W

D

35



MODULAR CAPABILITY

The Prana BWR MTD range is designed for modular application to accommodate multi unit larger capacity requirements***.

r HFCR-410A

AXIAL

r HFCR-410A

AXIAL


Prana BWR-DHW

REVERSIBLE HEAT PUMP WITH TOTAL HEAT RECOVERY40KW - 360KW

Unit Description

The DeLonghi Prana BWR DHW are a unique range of commercial ground orwater source heat pumps which are capable of providing a high efficiencycombination of output conditions:

• Heating only• Simultaneous heating and hot water to 55ºC. • Hot water only• Cooling only• Simultaneous cooling and hot water with up to 100% heat recovery• Simultaneous cooling and heating with up to 100% heat recovery

• The range is very similar to the Prana BWR MTD in terms of features and control however the range allows these four pipe units to be applied on awider range of applications.

• The range includes single-circuit/two-compressor versions and also twincircuit/four compressor versions for larger output capacity. This configuration provides excellent load management capability which giveshigh performance and efficiency along with associated contingency benefits and redundancy.

• These fully optimised water source heat pumps provide partial or total heat recovery for the simultaneous production of chilled/hot water withhermetic rotary scroll compressors operating with R410A, plate heat exchangers and thermostatically controlled expansion valve.

• Also these heat pump units will provide up to 100% duty on either primaryor secondary heat exchangers along with the ability to provide a combination of load capability heating and hot water simultaneously or heating and cooling simultaneously with up to 100% heat recovery. This allows the heat pump units to provide this simultaneous output feature tomanage seasonal heating and cooling loads from the same heat pump unit.

• Energy saving is achieved by the W3000 advanced control logic. The mostefficient operational mode is set completely automatically and independently by the units controller, in order to minimize the absorbed energy whatever the cooling and/or heating demand might be.

36

MODULARMODULARMODULARHOT WATERHOT WATERHOT WATERCOOLINGCOOLINGCOOLINGHEATINGHEATINGHEATING


W3000The W3000 controller offers the latest control and operatingfunctions developed directly by Climaveneta utilising theirexperience gained within the field of heat pump design and relatedplant engineering. The keypad is generously sized with a fulloperating status display, the controls and detailed LCD make accessto machine settings easy and safe. Temperature regulation with a proportional logic capabilityis related to the return water temperature which provides the ability to satisfy simultaneouslyheating, sanitary hot water and cooling requests with no need for mode changeover. Thediagnostics include full management of alarms with black box function and an alarm recorder foranalysis of unit performance. Monitoring is achieved through either Climaveneta devices or withvarious options for interfacing to ModBus, Bacnet or Echelon & LonTalk protocols. The controllerhas the compatibility to operate with a remote keyboard (single controller management of upto 10 modular units) along with a full time clock function for efficient programming of operation(standard 4 days and 10 time bands). Exclusive self-adaptive defrost logic, monitoring multipleoperational- and ambient parameters are incorporated which allow the unit to reduce the numberand duration of the defrost cycles with the benefit of increased overall energy efficiency.

Unit Summary

PRANA BWR DHW UNITS: WW/WWR & BW/BWR



These units provide simultaneous supplies of domestic hot waterand heating/air conditioning.


COP 4.1 (410% efficient)**BWR DHW source flow temperature 0ºC/-3ºC & output flow temp 35ºC

COP 5.06 (506% efficient)**WWR DHW source flow temperature 5ºC/10ºC & output flow temp 35ºC*Average COP for the Prana BWR & WWR MTD ranges

NOTE. Actual system efficiency (COP) and annual performance will depend on the distribution/emiitersystem utilised. Care should be taken to ensure that the heat pump is installed in order to provideefficient operational performance.


• Full DHW and heating control• Simulataneous heating and cooling outputs• Heating only or reversible heat pump• 100% heat recovery capability• Suitable for a 4 pipe distribution system• 55ºC output temperature• Modular control for multiple unit configuration• Compact footprint for plant room positioning

Prana BWR-DHW Ground Source & Geothermal Heat Pumps

BWR-DHW 0152 0182 0202 0252 0262 0302 0412 0512 0612

Cooling capacity (1) kW 48.6 55.8 65 73.8 83.2 97.5 127 159 206Total power input (1) kW 8.70 9.80 11.3 13.2 14.7 17.4 22.7 28.1 36.5EER 5.59 5.69 5.75 5.59 5.66 5.60 5.59 5.64 5.63ESEER * * * * * * * * *Heating capacity (2) kW 52.1 59.7 69.3 79 88.9 104 135 169 219Total power input (2) kW 12.4 13.8 16.2 18.5 20.4 23.9 31 38.4 49.9COP 4.20 4.33 4.28 4.28 4.36 4.37 4.35 4.40 4.38Cooling capacity (3) kW 40.4 46.7 54.1 61.7 67.9 82 106 133 172Total power input (3) kW 12.4 13.8 16.2 18.5 20.4 23.9 31 38.4 49.9Heat recovery capacity (3) kW 52.1 59.7 69.3 79 88.9 104 135 169 219No. Compressors/No. Circuits N. 2/2 2/2 2/2 2/2 2/2 2/2 2/2 2/2 2/2Total power input kWSound power (4) dB(A) 73 74 74 74 75 76 77 78 79Sound pressure (5) dB(A) 42 43 43 43 44 45 46 47 48Length (6) mm 1222 1222 1222 1222 1222 1222 1222 1222 1222Width (6) mm 893 893 893 893 893 893 893 893 893Height (6) mm 1496 1496 1496 1496 1496 1496 1496 1496 1496Operating weight (6) kg 450 470 490 505 525 550 745 825 910

BWR-DHW 0604 0704 0804 0904 1004 1104 1204 1404 1604

Cooling capacity (1) kW 194 225 255 285 317 365 413 468 522Total power input (1) kW 34.8 40 45.3 50.8 56.3 64.8 73 84.1 95.1EER 5.58 5.63 5.62 5.61 5.63 5.63 5.66 5.56 5.49ESEER * * * * * * * * *Heating capacity (2) kW 208 240 270 303 338 388 440 498 557Total power input (2) kW 47.7 54.7 61.8 69.2 76.8 88.4 99.6 113 126COP 4.36 4.38 4.37 4.38 4.40 4.39 4.41 4.41 4.42Cooling capacity (3) kW 163 188 212 238 266 305 346 392 438Total power input (3) kW 47.7 54.7 61.8 69.2 76.8 88.4 99.6 113 126Heat recovery capacity (3) kW 208 240 270 303 338 388 440 498 557No. Compressors/No. Circuits N. 4/2 4/2 4/2 4/2 4/2 4/2 4/2 4/2 4/2Total power input kWSound power (4) dB(A) 86 87 88 89 90 91 91 91 91Sound pressure (5) dB(A) 54 55 56 57 58 59 59 59 59Length (6) mm 2520 2520 2520 2520 2520 2520 2520 2520 2520Width (6) mm 880 880 880 880 880 880 880 880 880Height (6) mm 1810 1810 1810 1810 1810 1810 1810 1810 1810Operating weight (6) kg 975 1165 1365 1445 1610 1710 1810 1895 2000

Note:

1. Evaporator water (in/out) = 12/7°C; condenser water (in/out) = 14/30°C

2. Condenser water (in/out) = 40/45°C; evaporator water (in/out) = 14/7°C

3. Evaporator water (in/out) = 12/7°C; Recovery unit water (in/out) = 40/45°C

4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units.

5. Average sound pressure level, at 10m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level.

6. Unit in standard configuration/execution, without optional accessories.

L W

D

37



MODULAR CAPABILITY

The Prana BWR DHW range is designed for modular application to accommodate multi unit larger capacity requirements***.

r HFCR-410A

AXIAL

r HFCR-410A

AXIAL


Buffer Tanks38

Buffer Tanks (Stainless) 90L 120L 210L 300L

Capacity litres 90 120 210 300

Height mm 732 920 1483 2020

Diameter mm 550 550 550 550

Weight (empty) kg 13 18 28 37

Weight (full) kg 103 138 238 337

Standing losses kWhr/24hr 0.80 1.00 1.60 1.93

Maximum working pressure - cylinder bar 3.5 3.5 3.5 3.5

Maximum working pressure - space heating bar 3.5 3.5 3.5 3.5

Input connections heat pump x2 mm 28 28 35 35

Output connections heat pump x2 mm 28 28 35 35

Heat pump input connection tapping height mm 464 652 1215 1752

Heat pump output connection tapping height mm 295 295 295 295

Input connections heating x2 mm 28 28 35 35

Output connections heating x2 mm 28 28 35 35

Heating input connection tapping height mm 295 295 295 295

Heating output connection tapping height mm 464 652 1215 1752

Immersion Boss inch 1.75 1.75 1.75 1.75

Drain connection inch 0.5 0.5 0.5 0.5

Drain connection tapping height mm 220 220 220 220

Fill connection mm 22 22 22 22

Buffer Tanks (Carbon Steel) 100 - 2000 litres capacity

Best practice standards require a buffer tank to be incorporated within any heat pump system. The buffer tank provides thermalmass and inertia to the system whilst providing a thermal buffer during the heat pumps defrost cycle.

The buffer tank also provides an efficient means of incorporating any number of heat pumps or distribution circuits within a single systemi.e. a standard multi tap buffer allows for 2 x heat pumps and 2 x output circuits to be easily connected.

• Provide adequate thermal mass

• Ensure system volume is maintained at all times (regardless of any zone control)

• Provides thermal inertia during the defrost cycle

The buffer tank also provides a thermal break between the heat pump and the distribution system, this allows both sides of the system(heat pump and property) to operate at the optimum temperature difference in order to achieve maximum efficiency. A heat pump willrequire a narrow temperature differnece (typically 5ºC to 6ºC) where as the distribution system may require a wider temperature differencei.e. when specifying a retrofit installation or similar.

Example: 210 Litre

Buffer vessels are a high quality duplex stainless steel tank that contains a volume of water asper the specification table shown above.

The Buffer store is insulated to a very high standard using high density HCFC free foam casedin a steel shell and therefore has an ozone deletion potential (ODP) of zero and a globalwarming potential (GWP) of 1.

ICS HPT also provide a range of carbon steel buffer tanks up to 2000 litres in capacity. Pleasecontact technical sales support for details.

DHW Cylinders39

Stainless Heat Pump Optimised DHW is a range of unvented hot water storage cylinders, manufactured in the latest high quality duplexstainless steel. They are designed to provide mains pressure hot water and are supplied as a package which complies with Section G3of the Building Regulations. The appliance is extremely well insulated using high density HCFC free foam insulation with an ozonedepleting potential (ODP) of zero and a global warming potential (GWP) of 1. It is fitted with all necessary safety devices and suppliedwith all the necessary control devices to make installation on site as easy as possible.

STAINLESS HEAT PUMP OPTIMISED (HP)

The Stainless Heat Pump Optimised DHW is an unvented hot water storage cylinder fitted with two high efficiency internal primary heat exchangersespecially designed for use with heat pump systems. These two heat exchangers can be connected in parallel to the heat pump circuit when a solarthermal system is not installed. When both heat pump and solar thermal systems are installed, the top heat exchanger is connected to the heat pumpcircuit and the bottom heat exchanger is connected to the solar circuit a shown below. All Stainless Heat Pump Optimised DHW models are fitted with3kW (230Vac, 50Hz) immersion heater for raising the temperature of the stored water to about 60ºC after the heat pump heating cycle if necessary.

NOTES1. Not all models - see table 1

2. Recovery times based on Primary Coil/L.H Duty (i.e. assumes the boiler output is adequate)

3. All connections are supplied with compression fittings for direct connection to copper pipework

DHW Cylinders (Stainless) HP180IND HP210IND HP250IND HP300IND HP400IND

Capacity - total volume litres 180 210 250 300 400Volume heated by IH litres 113 135 160 195 270Dedicated solar volume litres 65 75 90 105 130Standing heat loss rate kWh/24h 1.40 1.60 1.75 1.93 3.33Weight - empty kg 33 38 43 49 61Weight - full kg 213 248 293 349 461Pressure regulating valve setting bar 2.25 2.25 2.25 2.25 2.25Expansion relief valve setting bar 4.5 4.5 4.5 4.5 4.5Temperature setting (P&T valve) ºC 90 90 90 90 90Pressure setting (P&T valve) bar 6.0 6.0 6.0 6.0 6.0Expansion vessel size (volume) litres 18 24 24 35 2 x 24Expansion vessel initial charge pressure bar 2.25 2.25 2.25 2.25 2.25Height A mm 1295 1483 1733 2020 2040Diameter B mm 550 550 550 550 63022mm secondary return C mm - 1127 1377 1577 159222mm compression cold feed D mm 442 442 522 522 557P & T valve E mm 1053 1241 1491 1777 178422mm solar return - bottom coil F mm 223 223 223 223 23822mm solar fl ow - bottom coil G mm 352 352 472 472 54828mm primary return - top coil H mm 467 542 647 742 64128mm primary fl ow - top coil I mm 1072 1232 1467 1562 1791Dual CT & OHT pocket - 1 top J mm 732 837 962 1092 1076Dual CT & OHT pocket - 2 bottom K mm 419 419 539 539 651Solar sensor pocket - 1 top L mm 882 1000 1180 1367 1382Solar sensor pocket - 2 bottom M mm 203 203 262 262 3343kW immersion heater height N mm 457 522 607 702 640Surface area of solar heater coil m2 0.68 0.68 0.97 0.97 1.27Solar coil thermal rating @ 25 l/s kW - - - - -Solar coil pressure loss @ 25 l/s bar 0.191 0.191 0.241 0.241 0.31Internal heat exchanger surface area m2 1.36 1.56 1.94 1.94 2.72Internal heat exchanger thermal kW 19.0 20.5 21.5 25.0rating @ 25 l/sInternal heat exchanger pressure bar 0.356 0.382 0.457 0.457loss series @ 25 l/s

IMPORTANT NOTES:1. All Stainless Lite HP models are suitable for both open vented and sealed

primary systems.2. Stainless Lite HP models must not be used with solid fuel boilers or steam as the heat source.3. Heat pumps will heat the domestic hot water to between 45ºC - 55ºC, therefore provision should be

made to periodically heat the cylinder to about 65ºC to prevent growth of legionella.

Sanitary hot water cylinders/stores 1000 - 5000 litres capacity

ICS HPT also provide a range of sanitary hot water cylinders/stores for commercial use up to 5000litres in capacity. Please contact technical sales support for details.


Fan Coils - Hydronic40

MHD. HIGH WALL MOUNTED FAN COILS

Hi-wall type terminal 2.15 - 4.70kW

MHD fan coil terminals are the premium high-wall hydronic fan-coil fromClimaveneta. The compact design and quality finish of this model coupled withthe exclusive elegance soften the visual impact and make the units ideal forboth office residential installations. These units provide all the standard befitsof a high wall fan coil but with the added benefit of a water based system, soreducing refrigerant within the building in line with the F-Gas regulations.

CHD. CEILING MOUNTED CASSETTE

Cassette type terminal 2.7-9.3kW

The CHD hydronic fan-coil cassette from Climaveneta is an electro-mechanical unit,available in two versions: For two pipe installation (unit with single coil) and forfour pipe installation (unit with double coil). A wide range of sizes and easyinstallation make them suitable for various types of application. CHD units areregistered within the EUROVENT certification programme. These units provide allthe standard befits of a ceiling mounted cassette but with the added benefit of awater based system, so reducing refrigerant within the building in line with theF-Gas regulations.

• U-2T electromechanical version for 2-pipe system• U-4T electromechanical version for 4-pipe system

ICS Heat Pump Technology provide a complete range of DeLonghi-Climaveneta Fan Coils and internal Air Handling Units tocomplement the Heat Pump range.

This high quality range of Fan Coils and Air Handling Units allows a complete climate control system to be specified which can provideheating, air-conditioning and domestic hot water.

The benefits of these water based cooling and heating systems can be significant, for example the amount of refrigerant within thesystem is reduced and the potential risk of refrigerant leaks is minimised when compared to refrigerant based direct expansion systems.

Also system installation is simplified as no high pressure refrigerant pipework is required within the building as the refrigeration systemis positioned externally within the fully packaged Air Source Heat Pump or within the Ground Source Heat Pump positioned within theplant area.

These fan coils are ideal for use with either heating only or reversible heat pumps providing a very efficient and environmentally consciousheating and/or air-conditioning system. The Climaveneta hydronic fan coil ranges encompass each key fan coil area of application:

1. High wall units2. Ceiling mounted cassettes (2 or 4 pipe)3. Floor/low wall mounted cased units (2 or 4 pipe)4. Ducted systems for residential or commercial specification (2 or 4 pipe)

In addition to the more traditional commercial applications, fan coils are gaining popularity within thecommercial & residential retrofit markets as they are proving an ideal way to provide an increased kWcapacity to existing radiator size restricted applications i.e. a significantly greater kW capacity from acompact controllable unit.



Wall, Ceiling, Floor Mount & Ducted Fan Coils41

I-LIFE. LOW WALL/FLOOR MOUNTED FAN COILS

High efficiency fan-coil with synchronous motor electronicswitches, with cabinet or built-in version 1.91 - 7.47kW

i-LIFE fan-coils incorporate modulating speed low energy centrifugal fans. This newgeneration of fan-coil guarantees air flow regulation from 0% to 100% and energyconsumption is reduced by more than 50% when compared to a traditional unit.In addition new commands & controls are available which manage all the functionsoffered by this range of high specification terminal units. Retrofit capability allowsthe i-life fan coil to provide an alternative to traditional radiators, offeringsignificantly greater capacity in an extremely compact unit.

• DFI built-in version, front air intake• DFU version with cabinet, front air intake• DLI built-in version, bottom air intake• DLU version with cabinet, bottom air intake

TYPICAL UNIT CONTROLLER – IK UNIT SHOWN(contact technical support for specific controller configuration)

• Configurable control with LCD screen• On-Off - modulating valve-unit• Master/Slave multiple configuration network• Quick installation with two wire connection

HWD. COMMERCIAL WALL/FLOOR MOUNT FAN COILS

High Head free blowing wall or floor mount terminal 16.8 - 29.8kW

As with the HWD HP ducted unit shown above, these wall or floor mounted versionswill provide heating or cooling with the option of flexible installation and positioning.

The units can be provided with either inlet and/or outlet plenum boxes which willallow specification either for new build or retrofit/refurbishment applications.

• Base version• Single or twin coil version• Heating or cooling option• Inlet and outlet plenum boxes available

HWD. COMMERCIAL DUCTED/FREE BLOWING FAN COIL

High head ducted type terminal 16.8 - 29.8kW

The HWD HP belongs to the ducted fan-coil high head range from Climaveneta.The units allow for vertical or horizontal installation with variable airflowadjustment, the modular configuration allows for ease of installation enablingthe unit to adapt to a variety of applications. The unit can be mountedhorizontally or vertically with a variable modular configuration to match thedemands of a particular specification. High pressure fan capability allows theHWD range of terminals to provide the ideal internal air handling unit selectionto operate with a medium or High temperature heat pump.

• Base version• Single or twin coil version• Heating or cooling option• Flexible plenum configuration

IDEALRADIATOR

REPLACEMENT


• Internal application support engineers - specification advice, technical application support and equipment selection

• Field based specification engineers - site survey/application support, client technical meetings and CPD service

• Online specifier hub - 24/7 information availability, secure login, specifier information and technical details

THE COMPLETE SPECIFIER/INSTALLER SUPPORT SERVICE

HEAT PUMP SPECIFICATION AND INSTALLATION MADE EASY, WITH 24/7ON-LINE, SUPPORT AND AN EXTENSIVE IN-HOUSE AND NATIONALAPPLICATION AND TECHNICAL SUPPORT STRUCTURE.

Application & Specification Support42

ENCLOSURES INSTALL PACKSHeat pumps can call for specific application demands interms of either noise or aesthetic requirements. Theseare the applications where ICS Heat Pump Technologycan provide a range of enclosures to match the on-siterequirements relating to the majority of residential andcommercial heat pump applications. These enclosuresystems range from a standard security enclosure to aspecific colour coordinated designed system or a lownoise heat pump acoustic enclosure with a specifiedoutput rating.

In addition to the above ICS HPT are also able to provide a range of ancillary equipment to compliment the heat pump installation/specification. Thisequipment includes the EcoAmp variable Inline Electric Heater which provides an ideal supplementary boost option for low ambient support or tosupplement a single phase heat pump installation.

Please contact technical sales support for details of the EcoAmp heater and the full range of ancillary equipment available

ACCESSORIESICS Heat Pump Technology provide a range of accessories in order to simplify and enhance the heat pump package. Thisancillary equipment is usually difficult for the installer/contractor to source on a local basis and hence there is a reasonto source as a package with the heat pump to minimise installation time.

Technical and application support is a critical element of the ICS-DeLonghi operation and is an area which is given the highest priority. The dedicatedteam of heat pump specialists provides both telephone and field base support as required. The majority of questions asked by ICS customers andpartners can be dealt with via our technical support desk which is manned by experienced engineers who have hands on knowledge of both theequipment and applications. You can be sure that your enquiry or query will be dealt with as a priority until the correct solutions is highlighted andthe situation is dealt with appropriately whether this be a new commercial specification or a technical/application question.

ICS provide the award wining partner hub to all APP registered users. The partner hub provides a complete access point for all application,specification, equipment and associated information on a 24/7 basis. The hub will provide you with many standard technical and sales documentsbut importantly also providing you with application and specification tools to assist you in producing quotations and/or specifications within theresidential and commercial markets. contact us for your unique password and log in details (activated when your APP card is registered).

A heat pump installation can be simplified with theaddition of an Install Pack which is provided toreduce the potential difficulty in sourcing specificitems locally. The ICS Install Packs include all theitems that an on-site installation team may finddifficulty in sourcing on a timely local basis.Importantly these Install Packs do not include anyfittings or pipe work relating to the installation butare designed to provide the more specific heatpump related items:

ADDITIONAL ANCILLARY EQUIPMENT


43

Glasgow*

Dublin

Bradford

Blackpool

Birmingham

Southampton

*Regional Distributor, Thermsaver

COMPLETE TECHNICAL AND SERVICE SUPPORT WITH A SPECIALIST TEAMPROVIDING PRE INSTALLATION, COMMISSIONING AND AFTER SALES SUPPORT TOMATCH THE REQUIREMENTS OF EACH PARTICULAR PROJECT

Technical & Service Support

• 5 UK service centres nationwide

• Specialist heat pump service team

• Commissioning service

• Technical/Installation support

• Technical help desk service

• Direct manufacturer support


� 24/7 Access to invaluable product and technical information

� Heat Pump selection and sizing tools

� Direct contact to our in house dedicated technical and sales help desk

� 25+ field based service team

� Direct access to the on-line Partner Marketing tools and support team

� Latest Heat Pump News; company, product and industry; LCBP, RHI

� Latest product and technical document updates

� Partner Hub password protected user access

2011 Product Guide v1

www.icsheatpumps.co.uk

3 Trident Business Park, Amy Johnson Way, Blackpool, FY4 2RP

T: 01253 685100 F: 01253 685101 e: [email protected]

ics heat pump technology product guide feb 2011

Documents

heat pump units

heat pump system

range of heat pumps

optimised heat pumps

ics heat pump technology

industrial heat pump

high temperature heat

heat transfer equipment