hydraulic crimping tool ht 131-c general features *suitable for storage of the head and 14 sets of...

Download HYDRAULIC CRIMPING TOOL HT 131-C general features *Suitable for storage of the head and 14 sets of dies

If you can't read please download the document

Post on 14-Aug-2020

0 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • 120

    Hydraulic presshead com- plete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166) This new design with improved mechanical features,

    This new model, self contained, ro- bust and sturdy, will accept all semi- circular slotted dies, com- mon to most 130 kN tools. The tool features a double speed action: a fast advancing speed for rapid approach of the dies to the con- nector and a slower more powerful speed for crimping. For ease of operation and comfort of the operator the tool head can be fully rotated through 180 degrees.

    The built-in safety valve will by-pass the oil supply when the maximum pressure is reached, and the pressure release system can easily be operated at any stage of compression.

    HYDRAULIC CRIMPING TOOL

    general features

    S T O R A G E

    Type Dimensions mm Weightkg Supplied

    with the tool Purchase separately

    VAL P3* 620x380xh135 2,5 � — *Suitable for storage of the tool and 14 sets of dies

    S T O R A G E

    Dimensions mm Weightkg Supplied

    with the tool Purchase separately

    *Suitable for storage of the head and 14 sets of dies

    Hydraulic press- head complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166).

    M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2

    L.V. lugs Insulated terminals H.V. lugs

    400 240 400

    S T O R A G E

    Type Dimensions mm Weightkg Supplied

    with the tool Purchase separately

    VAL P26* 445x290xh115 1,2 — � *Suitable for storage of the head and 14 sets of dies

    Crimping force kN

    Max operating pressure

    bar Weight

    kglength width

    D i m e n s i o n s m m

    130 700 216 80 3,1

    VAL P26* 445x290xh115 1,2 — �

    Type

    general features

    Particularly suitable for high volume bench crimping.

    These tools are supplied without dies. For die selection, please refer to chart on pages 186 to 194

    is suitable for installing the same range of connectors as HT 131-C.

    This new model, self contained, ro- bust and sturdy, will accept all semi- circular slotted dies, com- mon to most 130 kN tools. The tool features a double speed action: a fast advancing speed for rapid approach of the dies to the con- nector and a slower more powerful speed for crimping. For ease of operation and comfort of the operator the tool head can be fully rotated through 180 degrees.

    The built-in safety valve will by-pass the oil supply when the maximum pressure is reached, and the pressure release system can easily be operated at any stage of compression.

    HYDRAULIC CRIMPING TOOL

    general features

    S T O R A G E

    Type Dimensions mm Weightkg Supplied

    with the tool Purchase separately

    VAL P3* 620x380xh135 2,5 � — *Suitable for storage of the tool and 14 sets of dies

    HT 131-C

    RHC 131

    Hydraulic presshead com- plete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166) This new design with improved mechanical features,

    S T O R A G E

    Dimensions mm Weightkg Supplied

    with the tool Purchase separately

    *Suitable for storage of the head and 14 sets of dies VAL P26* 445x290xh115 1,2 — �

    Type

    is suitable for installing the same range of connectors as HT 131-C.

    RHC 131

    RHM 132

    Hydraulic press- head complete with quick automatic coupler for connection to a hydraulic pump with a working pressure of 700 bar max, (see page 162-166).

    M A I N A P P L I C A T I O N S - m a x s e c t i o n m m

    L.V. lugs Insulated terminals H.V. lugs

    400 240 400

    S T O R A G E

    Type Dimensions mm Weightkg Supplied

    with the tool Purchase separately

    VAL P26* 445x290xh115 1,2 — � *Suitable for storage of the head and 14 sets of dies

    Crimping force kN

    Max operating pressure

    bar Weight

    kglength width

    D i m e n s i o n s m m

    130 700 216 80 3,1

    general features

    Particularly suitable for high volume bench crimping.

    These tools are supplied without dies. For die selection, please refer to chart on pages 186 to 194

    RHM 132

    HYDRAULIC PRESSHEADS

    general features

    The built-in safety valve will by-pass the oil supply when the maximum pressure is reached, and the pressure release system can easily be operated at any

    *Suitable for storage of the tool and 14 sets of dies

    *Suitable for storage of the head and 14 sets of dies VAL P26* 445x290xh115 1,2 —

    M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2

    Crimping force kN

    Weight kglength width

    D i m e n s i o n s m m

    130 473 144 25 5,5

    Jaw Opening mm

    Crimping force kN

    Max operating pressure

    bar Weight

    kglength width

    D i m e n s i o n s m m

    130 700 232 124 25 3,8

    Jaw Opening mm

    M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2

    L.V. lugs

    Insulated terminals

    “C” sleeve connectors

    H.V. splices

    400 240 240 185 400 240

    L.V. splices

    H.V. lugs

    M A I N A P P L I C A T I O N S - m a x s e c t i o n m m 2

    L.V. lugs

    Insulated terminals

    “C” sleeve connectors

    H.V. splices

    400 240 240 185 400 240

    L.V. splices

    H.V. lugs

    www.cablectrix.com tel:01327 876769

  • 185

    D I

    E

    S E

    L E

    C T

    O R

    C

    H A

    R T

    www.cablectrix.com tel:01327 876769www.cablectrix.com tel:01327 876769www.cablectrix.com tel:01327 876769

  • 1 9 1

    AU 130-150

    AU 130-240

    PS 130-35/E

    PS 130-95/E

    PS 130-150/E

    PS 130-240/E

    MV 35

    MV 95

    MV 150

    MV 240

    A L U

    M IN

    IU M

    C O

    N D

    U C

    T O

    R S

    Conductor Size sqmm LUGS DIE HOLDER DIE INDENTOR

    Conductor Size sqmm LUGS DIE HOLDER DIE INDENTOR

    CONDUCTORAPPLICATIONS

    HYDRAULIC TOOLS

    CONNECTORS HT 131-UC RHU 131-C B 131-UC

    16 CAA 16 - M..

    CAA 25 - M..

    CAA 35 - M..

    CAA 70 - M..

    CAA 95 - M..

    CAA 120 - M..

    CAA 150 - M..

    CAA 185 - M..

    CAA 240 - M..

    MTA 35 - C

    MTA 25 - C

    MTA 16 - C

    MTA 70 - C..

    MTA 95 - C..

    MTA 120 - C..

    MTA 150 - C..

    MTA 185 - C..

    MTA 240 - C..

    AA 50 - M..

    AA 35 - M..

    AA 25 - M..

    AA 16 - M..

    AA 70 - M..

    AA 95 - M..

    AA 120 - M..

    AA 150 - M..

    AA 185 - M..

    AA 240 - M..

    25

    35

    70

    CAA 50 - M.. MTA 50 - C50

    95

    120

    150

    185

    240

    CAA 300 - 34 - M..300

    50

    35

    25

    16

    70

    95

    120

    150

    185

    240

    AA 300 - 34 - M..300

    Indent crimp

    AU 130-150

    AU 130-240

    PS 130-35/E

    PS 130-95/E

    PS 130-240/E

    MUA 35

    MUA 95

    MUA 240

    MUA 300-34

    MUA 300-34

    MUA 35

    MUA 95

    MUA 150

    MUA 240

    PS 130-150/EMUA 150

    D I E S E L E C T O R C H A R T F O R D E E P S T E P P E D I N D E N T I N G W I T H C O N T A I N I N G D I E S

    CAA..-M..

    MTA..-C

    CAA..-M..

    MTA..-C

    AA..-M..AA..-M..

    10 CAA 10 - M..

    www.cablectrix.com tel:01327 876769www.cablectrix.com tel:01327 876769www.cablectrix.com tel:01327 876769

  • 1 9 2

    D I E S E L E C T O R C H A R T F O R D E E P S T E P P E D I N D E N T I N G W I T H C O N T A I N I N G D I E S

    PRE-ROUNDERS SELECTION DESCRIPTION SEQUENCE OF USE

    50

    70

    95

    120

    150

    185

    240

    UP 130-50

    ALUMINIUM CONDUCTOR SIZE sqmm PRE-ROUNDER DIE-SUPPORT CRIMPINGCONDUCTOR ROUNDING

    UP 130-70

    UP 130-95

    UP 130-120

    UP 130-150

    UP 130-185

    UP 130-240

    1) AU 130-.. DIE-HOLDER Used to house dies and pre-rounders.

    2) UP 130-.. PRE-ROUNDERS Used to round Aluminium sectoral conductors in order to introduce them into circular connectors. Each pre-rounder is made of two parts: the upper part is housed in die-holder AU 130-.. and the lower part is locked onto AC 130-P.. die support.

    3) AC 130-P.. DIE SUPPORT Houses lower part of pre-rounder UP 130-..

    4) MUA... DIES Containing dies.

    5) PS 130-../E INDENTORS Specifically engineered for deep indentation of Aluminium conductors of any stranding configuration.

    1 1

    4

    5

    2

    3 Indent crimp

    25

    35 UP 130-35

    UP 130-25

    AC 130-P

    A L U

    M IN

    IU M

    C O

    N D

    U C

    T O

    R S

    MTMA..-..GC

    16

    MTMA 50-25 GC

    MTMA 50-35 GC

    MTMA 70-35 GC

    MTMA 70-50 GC

    MTMA 95-50 GC

    MTMA 95-70 GC

    MTMA 120-70 GC

    MTMA 120-95 GC

    MTMA 150-70 GC

    MTMA 150-95 GC

    MTMA 150-120 GC

    MTMA 185-120 GC

    MTMA 185-150 GC

    MTMA 240-150 GC

Recommended

View more >