© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.

HP Indigo WS6X00 (requires Software v8.9.4) HP Indigo 7X00 (requires Software v8.6.3)

Prepared by HP Indigo documentation and training tools department

Last updated: June 2014

Invert LUT – to support Color-Logic

Open Job Properties

Invert LUT – to support Color-Logic

Go to Color Control Tab And select Load LUTs…

Invert LUT – to support Color-Logic

Select Iinear_Invert And Load

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.

HP Indigo 5500/5600 (requires Software v7.7.2)

Prepared by HP Indigo documentation and training tools department

Last updated: June 2014

Invert LUT – to support Color-Logic

Select Job and open Job properties

Content

Invert LUT – to support Color-Logic

Open Color Control Tab And open LUT Library

Content

Invert LUT – to support Color-Logic

Select Invert linear LUT and click Load

Content

Invert LUT – to support Color-Logic

Click Copy to All Separations button

Content

Invert LUT – to support Color-Logic

Content

The invert LUT is applied

© Copyright 2012 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice.

HP Indigo Commercial Presses: Using Smartstream Designer / Production Pro to support Color-Logic

Prepared by HP Indigo documentation and training tools department

CA339-0???? I Last updated: June 2013

Invert LUT via Smartstream Designer to support Color-Logic

Select Designer > Create Job.

Select format JLYT-Rich and change the color mode to "Color Logic" (this procedure will add a spot color named 'CL 4713 SILVER' to the JLYT-Rich which will be inverted on the HPI Press).

The inversion is written in the Designer JLYT output file and executed on the HPI Press.

Select JLYT for output and copy it on the Production Pro to Computer/HotFolder (S:)/Jobs/ Your Template name/Template folder.