www.balloontime.com

1) Fully open the green valve (A) by turning it counter-clockwise until it stops.

2) Slide balloon onto the black tilt nozzle (B).

3) Hold balloon tightly onto tilt nozzle (B) and push downward to release helium. Remove balloon and tie knot.

How to use your Balloon Time helium tank

(A) Valve

(B) Tilt nozzle

(C) Valve nut

Collar

Helium Tank

Back of tank

(D) Relief Disc

www.balloontime.com

How to safely recycle your EMPTY helium tank*Recycling programs vary by area. Please contact your waste management autority to verify that steel is accepted.

1) Fully open the green valve (A) by turning counter-clockwise until it stops.

You will need:1) Hammer 2) Flat-head screwdriver 3) Protective work gloves and goggles 4) Permanent marker

5) Put on protective gloves and goggles. Using a hammer and flat-head screwdriver, puncture the side of the small relief disc (D) on the back shoulder, and pry open. You may have to puncture the ring in a few places around the disc to fully remove.

6) Remove the disc by hand. Edges may be sharp, wear gloves and use caution.

7) Circle the open hole and write Empty directly on the tank. Dispose of with other recyclables.

2) Push down on the tilt nozzle (B) until hissing sound stops to release residual pressure.

3) Remove the tilt nozzle (B) by turning the white valve nut (C) counter-clockwise.

4) Your Balloon Time tank should now look like this.