How to Make:Wavy Washer Earrings

MaterialsTwo 10 inch pieces of 22 gauge craft wireTwo Earwires (Any Style)Two Headpins (Any Style)Two 20mm Wavy WashersTwo 6mm Spacer BeadsTwo 8mm Ceramic Beads (Your Choice of Color)

Tools:Round Nose PliersWire CuttersNylon Jaw PliersChain Nose PliersFlat Nose Plierszzzzzz

Step 1:Make two dangles with your ceramic beads by making a loop with your round nose pliers.

Step 3:Wrap your wire around the top of your washer and cut off the excess wire. Use your flat nose pliers to flatten the wires to ensure there is not any wires sticking up.

Step 4:Insert your second wire through your spacer and wrap it using your round nose pliers. You want the wires to be close together in a V- shape so that you can slide your metal spacer bead on.

Step 5:Pull your wire up and out so that the spacer stays in place. Then, open your ceramic bead and insert it into the dangle that you created on the bottom of the piece. Secure the loops closed with your round nose pliers.

Step 6:Insert your leverback or earwire and your beautiful new earrings are finished!