How To Make: Twisted Beaded Pendant

Materials: 8 inches of 20 gauge copper wire, 4 glass beads – size 4 mm, 1 copper bead – size 4 mm

Tools: Round nose pliers, wire cutters

Step 1: Insert one bead onto the wire, then bend wires as shown in the photo

Step 2: Insert beads onto the wire, then wrap wires around them as shown in the photos

Step 3: Bend wires as shown in the photo

Step 4: Create two small loops, then cross wires as shown in the photo

Step 5: Insert copper bead onto both wires, then trim one of them

Step 6: Insert glass bead, then create final loop. Now attach chain, your necklace is ready to wear!