How To Make: Simple Stone Pendant

Materials: 10 Inches of 20 gauge copper wire, 1 stone bead – size 14 mm, 1 stone bead – size 4 mm

Tools: Round Nose pliers, Wire Cutters

Step 1: Insert small stone bead onto the wire and then wrap wire around it as shown in the photo

Step 2: Insert next bead onto the wire, then create loop shape at the top of it

Step 3: Wrap wire around the bead as shown in the photo

Step 4: Wrap wire around the base - at the bottom of the bead – (between big and small bead). Trim wire which is left

Step 5: If beads are not as you want them to be you can shape and bend wires a little bit to create a nice pendant shape. Now just attach the chain. Your necklace is ready to wear!