How To Make: Double Stone Pendant

Materials: 10 inches of 20 gauge copper wire, 2 stone beads- size 6 mm

Tools: Round Nose Pliers, Wire Cutters

Step 1: Create 1 loop in the middle of the wire, then bend wire creating arc shape

Step 2: Insert bead onto the wire, then create drop shape from the base and wrap wire around the bead as shown in the photo

Step 3: Insert second bead onto the wire, then wrap wire around the bead

Step 4: Wrap the second wire around the bead as shown in the photo

Step 5: Bend wire to the bottom of the pendant and wrap the end of it around the base as shown in the photos

Step 6: Create “final loop” at the top of the pendant

Step 7: Wrap wire which is left around the top of the pendant. If you need to you can trim the wire, or just wrap it around the top till it ends. Now just attach the chain. Your necklace is ready to wear!