How to Make A: Cherry Necklace

Materials:One red jade bead size 10mm8 Inches of 20 gauge Copper WireWire CuttersRound Nose Pliers

Step 1: Create small loop at the end of the wire. Use round nose pliers to do that.

Step 2:Bend wire as shown in the photo, then insert jade bead onto the wire.

Step 3:Bend wire towards the ground as shown in the photo.

Step 4:Create small leaf shape.

Step 5:

Bend wire as shown on the photo, then create loop shape.

Step 6:Wrap wire around itself and around leaf shape too. Do it as shown on the photos.

Step 7:Trim wire if you need to. Add chain to your pendant. Your necklace is ready to wear!