How to Fix the Broken Touch Screen of Your HTC Phone!

Repairing a broken touch screen can be a nightmare especially when all your contacts and details are shared on your phone. Most of us don’t remember phone numbers by heart. Once the number is saved on our phone, we make calls by searching for the number in our contact list. As such if the phone becomes defunct, we can be in a soup. Following are 13 easy steps that will help you to replace the broken screen so that you can again use your Smartphone.

# We will begin with removing the 5 Torx screws from the base. In case you think that you will get confused, click a picture of your phone so that you know what was where.

1st Step

# Now remove the back cover using the pry tools.

2nd St

ep

• Remove the 5 Torx screws that can be seen now.

• Push the main device out of the metal chassis. Be careful while doing it, don’t be too hard while handling as this might break the chassis.

• Get the two 5 Torx screws at the top.

• As we are separating the display elements from the phone you need to be extra careful. Look for the 2 ribbon cables coming in the side. Use the pry tool to remove the tape, if any. Lifts up the white locking element and with the help of a small screw remove the ribbons.

Other Steps

# Now comes the hardest part of repairing the phone all by your own. You need to remove the gasket that binds the digitizer with the display chassis. In order to soften the adhesive you need to heat it. But be careful. Too much heat can destroy the display screen, so we recommend that you use a hair dryer. Keep the mouth of the dryer away and keep on rotating the heat throughout the phone so that the adhesive loosens and the gasket comes off.

• Use the pry tool to lift up the least broken part of the glass. If the adhesive is too sticky then you need to use the heat again so that it becomes easier to remove the glass.

• If you have damaged the gasket in the process then comes this step. You need to replace it with a new one. There are many online stores that deal in these HTC parts that you can easily purchase.

• If there is any protective film inside the phone then remove it. Now feed the new digitizer ribbon, angle it properly and firmly push it down so that the glue gets stuck properly.

Now switch on your phone and wait for it to spring back to life once again. Voila! You are all set to use the phone once again.

Address:PO BOX : 71042 Vancouver BC V6N 4J9 CanadaTEL : 604-721-8495 Office hour pacific time : Mon-Fir 10:30 AM to 4 PMLocation : west 6th and Willow at Vancouer URL : https://android-parts.net

TORONTO LOCATION: 5 HANNA AVE TORONTO, INSIDE LIBERTY VILLAGE. Ph: 647-860-2271VANCOUVER LOCATION : WEST 6TH AVE AND WILLOW STREET VANCOUVER. Ph: 604-721-8495

OFFICE HOUR : MONDAY TO FIRDAY 11AM TO 4PM SUNDAY 1PM TO 5PM CLOSE ON SATURDAY

References:

Content Reference:

https://androidparts.wordpress.com/2015/07/25/how-to-fix-the-broken-touch-screen-of-your-htc-phone/ https://android-parts.net/htc.html

Image and Media References:

http://www.google.com/

Thank You for your time and

Attention!