hospital medical furniture manufacturers

17
hospital furniture manufacturers in India.

Upload: original-medical

Post on 25-Jul-2016

224 views

Category:

Documents


4 download

DESCRIPTION

Original Medical Furniture is manufacturer & suppliers of Some of our products are lifelines of the medical industry and cannot be overruled. A list comprises of bed side screens, I.V. stand, kick bucket, dressing trolleys, hand wash basin stand, fowler bed, and foot step double, baby cradle, examination table, surgeon chairs, etc. Our Website : http://www.original-medical.com/hospital-furniture/index.html

TRANSCRIPT

Page 2: Hospital medical furniture manufacturers

Bed Side Screen (3 Panels)

Code: OML-1100

Frame work made of ERW tubular pipe in three fold. The two outer fold 60 cm. Wide with one each castors of 50 middle span 122 cm. Wide with castors of 5 cm. Dia.Supplied with spring wire and curtains, Pre-treated and Epoxy coated.

Size: 168 hx244w cm

Note: Also available in 4-folds

Page 4: Hospital medical furniture manufacturers

Medical Kick Bucket

Tubular Frame work mounted on 50 cms castors. With 35 cms dia S.S. basi. Pre-treated and Epoxy.Powder Coated.

Page 5: Hospital medical furniture manufacturers

Stainless Steel Dressing Trolley

Frame stainless steel square tube. 2 stainless steel shelves with railing on top. Stainless steel bowl dia 345mm. Bucket dia.300mm.Size: 1080 L x 830 H mm.Also available in full stainless steel/ powder coated frame with stainless steel shelves and railings.

Page 6: Hospital medical furniture manufacturers

Traumacare Crash Cart & Solied Linen Trolley S.S.

Tubular frame made of stainless steel mounted on 125mm Dia. Swiveling castors. Two castors with brake and all castors provided with corner buffers. Two stainless steel shelves with three side railing provided. Hosed with tow polyestrene storage units with three locakable drawers each. Two top drawers provided with different sized containers. Stainless steel IV rod provided. Provided with Cardiac massage board. Supplied in KDC.Size: 940 x 490 x 1535 mm(LxBxH) approx

Page 7: Hospital medical furniture manufacturers

Mayo Instrument Trolley

Tray size S.S.: 56L x 40W cms. Rectangular CRC tubes mounted on 5cms castors, height adjustable bysideKnob. Pre-treated with Epoxy Powder Coated finish. Also available in S.S. frame & Tray.

Page 8: Hospital medical furniture manufacturers

Hand Wash Basin Stand

Five Legs base mounted on 5 cms dia castors. With two approx.35 cms S.S basin. In SS pipe and rings.Also available in pre-treated with epoxy powder coated.

Page 9: Hospital medical furniture manufacturers

Hospital Ward Bed

Frame work of rectangular CRC tubes. Tubular Head & Foot Bows with vertical tube supports. 'H' type legs mounted on PVC stumps perforated CRCA sheet top. Provision for saline rod at four locations. Pre-treated and Epoxy Powder Coated finishOver all size :- 206 Length x 90 Width x 60 H cms.

Page 10: Hospital medical furniture manufacturers

Hospital Semi Fowler Beds

Frame work of rectangular CRC tubes.S.S.Head & Foot Bows with laminated.'H' type legs mounted on 10cm castors two with brakes two sections perforated CRCA sheet top. Back rest section manouvered by srew machanism form the foot end. Provision for saline rod at four locations. Pre-treated and Epoxy Powder coated finish.Over all size :- 206L x 90W x 60H cms.

Page 11: Hospital medical furniture manufacturers

Hospital Fowler Bed

Frame work of rectangular CRC tubes. unequal Head & Foot Bows of CRC tubes, mounted on 10cms castirs- two with brakes. Four Section preforated CRCA sheet top.Back rest and knee rest section manouvered by separate screw from foot end. Provision for saline rod at four locations. Pre-treated and Epoxy Powder coated finish.Over all size :- 206L x 90W x 60H cms

Page 12: Hospital medical furniture manufacturers

Hospital ICU Bed Mechanical

Frame work made of rectangular CRC tubes. 4 section top made of preforated CRCA sheet. Back rest, knee rest, TB/RTB and Hi-lo postions manonuvered by separate srewform foot end. ABS molded head and foot bows. Also available with collapsible / swing aways safety side railling, telescopic IV rod. Bed mounted on 125 mm Dia castor two with Brakes.Over all size :- 206L x 90W x 60H cms.

Page 13: Hospital medical furniture manufacturers

Hospital ICU/CCU Bed Moniterised

Frame work made of rectangular CRC tubes, ABS topin four sections, back rest, knee rest, TB/RTB and Hi-lo postion obtained by electric actuators operated by hand remote system, ABS moulded head and foot bows. Also available with aluminium collapsible safety side railing, Telescopic IV Rod. Bed Mounted on 125 mm Dia Caster two with locking.Over all size :- 210 L x 90W x 80H cms.Finish epoxy powder coated

Page 14: Hospital medical furniture manufacturers

Foot Step Double

Tubular legs fitted with PVC stump. M.S. top fixed with rubber matting and aluminiumbeedings. pre-treated nad Epoxy powder Coated.Size : 18" x 9" x 9". Single step also available

Page 15: Hospital medical furniture manufacturers

Tubular Frame. Stand with PVC stumps. Wire mesh hanging cradle pro-treated and epoxy coated finish.

Page 16: Hospital medical furniture manufacturers

Surgeon Chair

Cushioned seat and back. Pneumatic height adjustable. 5 legs base on castors.

Page 17: Hospital medical furniture manufacturers

Contact UsOriginal Medical Equipment Company Pvt. Ltd.579/C , Ground Floor,Laxmi NagarNew Delhi -110092Phone: + 91 - 11 - 6587 4402Mobile: +91 - 82850 78886Fax: +91 - 11- 25641872E-Mail: [email protected], [email protected], [email protected]: www.original-medical.com