hitch accessories interchangeable hitch ball

4
WWW.CROFTTRUCKSA.COM CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS PART NO. QTY. DESCRIPTION DRAWBAR OEM KITS 83637 1 Dodge magnum hitch, 2,000 lbs. (includes pin and clip) INVISI-HITCH ACCESSORIES 28451 1 Drawbar Kit, 2,000 lbs. (includes swivel pin) 28351 1 accessory adapter Kit (includes swivel pin) PART NO. DESCRIPTION RATING (LBS.) GTW/TW LENGTH MAX. RISE MAX. DROP QUICK RELEASE ADJUSTABLE BALL MOUNT (QUICK RELEASE PIN AND CLIP) 6580 Complete Shank and head assembly 6,000/600 12” 6-1/8” 7-3/8” ADJUSTABLE BALL MOUNT 1420 Complete Shank and head assembly 5,000/500 12” 6” 7-1/4” 1422 Complete Shank and head assembly 5,000/500 14” 6” 7-1/4” 1424 Complete Shank and head assembly 5,000/500 16” 6” 7-1/4” ADJUSTABLE BALL MOUNT WITH SWAY CONTROL TAB (PLATFORM MOUNTS FOR LEFT OR RIGHT HAND) 7390 Complete Shank and head assembly 6,000/600 12” 3-3/4” 5-1/4” all hitch balls built with wrench flats INTERCHANGEABLE HITCH BALL SYSTEM Designed to accommodate towing multiple trailers with ease, tow ready interchangeable hitch Ball System allows you to change hitch ball sizes in seconds without any tools. available in 2 and 3-ball sets, these kits feature a quick-release, positive-latch design. available in 3/4” and 1” shank models. PART NO. QTY. DESCRIPTION MAX GTW (LBS.) REPLACEMENT PARTS 63805 1 1-7/8” interchangeable hitch Ball head - 63806 1 2” interchangeable hitch Ball head - 63807 1 2-5/16” interchangeable hitch Ball head - 63808 1 3/4” interchangeable hitch Ball Shank 5,000 63809 1 1” interchangeable hitch Ball Shank 8,000 PART NO. QTY. SHANK BALL A BALL B BALL C MAX GTW (LBS.) INTERCHANGEABLE HITCH BALL SYSTEM 63801 1 Set 3/4” 1-7/8” 2” - 5,000 63802 1 Set 1” 1-7/8” 2” - 8,000 63804 1 Set 1” - 2” 2-5/16” 8,000 63803 1 Set 1” 1-7/8” 2” 2-5/16” 8,000 • innovative quick release changes balls in seconds • rated capacities up to 8,000 lbs. • Durable heat treated shank • New positive latch design • No special tools required STEP 1: ATTACH SHANK • attach correct shank to drawbar or ball mount • torque to required tightness STEP 2: ATTACH BALL • Select the correct ball size for your trailer • place ball on shank STEP 3: TIGHTEN LOCKING HEAD • innovative locking screw requires only 1/4 turn to secure • No need for special tools YOU’RE TOW READY! 63880 63826-006 63851 * ultra Frame or titan receiver and ball mount must be used to achieve 14,000 lbs. rating. Consult tow vehicle owners manual for maximum towing capacities. • Cold forged for superior strength • when installing hitch balls, torgue all 3/4” shank dia. (B) balls to 160 ft. lbs., 1” shank dia. (B) balls to 250 ft. lbs., and 1-1/4” shank dia (B) balls to 450 ft. lbs. BALL DIA. A FINISH ZINC CHROME SHANK DIA. B SHANK LENGTH C DRAWBAR THICKNESS RANGE GTW GVWR RATING BULK HITCH BALLS * 1-7/8” 63811 63810 3/4” 1-1/2” 3/8”-5/8” 2,000 1-7/8” 63813 63812 3/4” 2-3/8” 3/8”-1-3/8” 2,000 1-7/8” - 63814 3/4” 3-3/8” 3/8”-2-1/8” 2,000 1-7/8” 63817 63816 1” 2-1/8” 3/8”-3/4” 2,000 1-7/8” 63819 63818 1” 3-3/8” 3/8”-2-1/8” 2,000 2” 63821 63820 3/4” 1-1/2” 3/8”-5/8” 3,500 2” 63823 63822 3/4” 2-3/8” 3/8”-1-3/8” 3,500 2” - 63824 3/4” 3-3/8” 3/8”-2-1/8” 3,500 2” 63827 63826 1” 2-1/8” 3/8”-3/4” 6,000 2” 63829 63828 1” 3-3/8” 3/8”-2-1/8” 6,000 2” 63831 63830 1-1/4” 2-3/4” 3/8”-1” 8,000 2-5/16” 63833 63832 1” 2-1/8” 3/8”-3/4” 6,000 2-5/16” 63835 63834 1-1/4” 2-3/4” 3/8”-1” 12,000 2-5/16” - 63836# 1-1/4” 2-3/4” 3/8”-1” 14,000 2-5/16” - 63838# 1-1/4” 2-3/4” 3/8”-1” 17,000 PACKAGED HITCH BALLS 1-7/8” 63881 63880 3/4” 1-1/2” 3/8”-5/8” 2,000 1-7/8” - 63882 3/4” 2-3/8” 3/8”-1-3/8” 2,000 1-7/8” 63885 63884 1” 2-1/8” 3/8”-3/4” 2,000 2” 63888 63887 3/4” 1-1/2” 3/8”-5/8” 3,500 2” - 63889 3/4” 2-3/8” 3/8”-1-3/8” 3,500 2” 63892 63891 1” 2-1/8” 3/8”-3/4” 6,000 2-5/16” 63895 63894 1” 2-1/8” 3/8”-3/4” 6,000 2-5/16” 63897 63896 1-1/4” 2-3/4” 3/8”-1” 12,000 PACKAGED HITCH BALLS (6 PACK RETAIL DISPLAY) 1-7/8” - 63810-006 3/4” 1-1/2” 3/8”-5/8” 2,000 1-7/8” - 63816-006 1” 2-1/8” 3/8”-3/4” 2,000 2” - 63826-006 1” 2-1/8” 3/8”-3/4” 6,000 2-5/16” - 63832-006 1” 2-1/8” 3/8”-3/4” 6,000 PACKAGED STAINLESS STEEL HITCH BALLS 1-7/8” Stainless Steel Finish 63851 1” 2-1/8” 3/8”-3/4” 2,000 2” 63852 1” 2-1/8” 3/8”-3/4” 6,000 2-5/16” 63853 1” 2-1/8” 3/8”-3/4” 6,000 We offer ball mounts and drawbars in three separate styles: straight cut, angle cut and drop cut. refer to the styles below to select the mount that best suits your needs. 3590 3594 3593 36051 36063 36071 83637 28351 28451 DRAWBAR TYPES HITCH ACCESSORIES Drop Not availaBle B PART NO. RATING (LBS.) GTW/TW BALL HOLE SIZE A LENGTH B RISE C DROP STYLE 3590 2,000/200 3/4” 6-5/8” 5/8” N/a 1 3591 2,000/200 3/4” 9-3/4” 5/8” N/a 1 3592 2,000/200 3/4” 9-3/4” 2-1/8” 2-3/4” 2 3593 2,000/200 3/4” 6-5/8” 2-1/8” 2-3/4” 3 3594 2,000/200 3/4” 10” 4” N/a 2 • Boxs includes drawbar, pin and clip • Black powder coat finish • Boxs includes drawbar, pin and clip • Black powder coat finish Note: Class i drawbar applications are specific. the correct replacement drawbar part number is listed on each Class i hitch installation instruction sheet. CLASS I DRAWBAR KITS CLASS II DRAWBAR KITS PART NO. RATING (LBS.) GTW/TW BALL HOLE SIZE A LENGTH B RISE C DROP STYLE 36051 3,500/300 3/4” 7” 5/8” 1-1/4” 1 36053 3,500/300 3/4” 9-3/4” 5/8” 1-1/4” 1 36061 3,500/300 3/4” 9-3/4” 3-1/8” N/a 2 36063 3,500/300 3/4” 11-3/4” 3-1/8” N/a 2 36065 3,500/300 3/4” 10” 5” N/a 2 36071 3,500/300 3/4” 7-3/16” 2-5/8” 3-1/4” 3 36078* 3,500/300 3/4” 7-3/8” - 4-3/4” 3 * Fits 1-1/4” oem Ford explorer, lincoln aviator & mercury mountaineer hitch Note: Class ii drawbar applications are specific. the correct replacement drawbar part number is listed on each Class ii hitch installation instruction sheet. STYLE 1 STYLE 2 STYLE 3 SPECIALTY BALL MOUNTS 6580 1420 1422 1424 7390 • Shank can be used in rise or drop position • Black powder coat finish Note: hitch ball, pin (55010) and clip (55515) sold separately. Not interchangeable with weight distribution replacement parts adjustable ball mounts are perfect for those who tow multiple trailers of varying coupler heights. Solid steel hitch balls engineered to meet all safety requirements of VESC regulation V-5

Upload: croft-supply-and-distribution

Post on 09-Mar-2016

234 views

Category:

Documents


2 download

DESCRIPTION

CALL 210-773-9494 WWW.CROFTHITCH.COM 1503 N. BRAZOS WWW.CROFTTRUCKEQUIP.COM we offer ball mounts and drawbars in three separate styles: straight cut, angle cut and drop cut. refer to the styles below to select the mount that best suits your needs. • innovative quick release changes balls in seconds • rated capacities up to 8,000 lbs. • Durable heat treated shank • New positive latch design • No special tools required

TRANSCRIPT

Page 1: HITCH ACCESSORIES inTerchangeable hiTch ball

WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

parT no. qTy. DescripTionDrawbar oem kiTs

83637 1 Dodge magnum hitch, 2,000 lbs. (includes pin and clip)

invisi-hiTch accessories

28451 1 Drawbar Kit, 2,000 lbs. (includes swivel pin)

28351 1 accessory adapter Kit (includes swivel pin)

parT no. DescripTion raTing (lbs.) gTw/Tw lengTh max. rise max. Dropquick release aDjusTable ball mounT (quick release pin anD clip)

6580 Complete Shank and head assembly 6,000/600 12” 6-1/8” 7-3/8”

aDjusTable ball mounT1420 Complete Shank and head assembly 5,000/500 12” 6” 7-1/4”1422 Complete Shank and head assembly 5,000/500 14” 6” 7-1/4”1424 Complete Shank and head assembly 5,000/500 16” 6” 7-1/4”

aDjusTable ball mounT wiTh sway conTrol Tab (plaTform mounTs for lefT or righT hanD)7390 Complete Shank and head assembly 6,000/600 12” 3-3/4” 5-1/4”

all h

itch

balls

bui

lt w

ith w

renc

h fla

ts

inTerchangeable hiTch ball sysTemDesigned to accommodate towing multiple trailers with ease, tow ready interchangeable hitch Ball System allows you to change hitch ball sizes in seconds without any tools. available in 2 and 3-ball sets, these kits feature a quick-release, positive-latch design. available in 3/4” and 1” shank models.

parT no. qTy. DescripTion max gTw (lbs.)replacemenT parTs

63805 1 1-7/8” interchangeable hitch Ball head - 63806 1 2” interchangeable hitch Ball head - 63807 1 2-5/16” interchangeable hitch Ball head - 63808 1 3/4” interchangeable hitch Ball Shank 5,000 63809 1 1” interchangeable hitch Ball Shank 8,000

parT no. qTy. shank ball a ball b ball c max gTw (lbs.)inTerchangeable hiTch ball sysTem

63801 1 Set 3/4” 1-7/8” 2” - 5,00063802 1 Set 1” 1-7/8” 2” - 8,00063804 1 Set 1” - 2” 2-5/16” 8,00063803 1 Set 1” 1-7/8” 2” 2-5/16” 8,000

• innovative quick release changes balls in seconds• rated capacities up to 8,000 lbs.• Durable heat treated shank• New positive latch design• No special tools required

sTep 1: aTTach shank• attach correct shank to drawbar or ball mount• torque to required tightness

sTep 2: aTTach ball• Select the correct ball size for your trailer• place ball on shank

sTep 3: TighTen locking heaD• innovative locking screw requires only 1/4 turn to secure• No need for special tools

you’re Tow reaDy!

63880

63826-006

63851

* ultra Frame or titan receiver and ball mount must be used to achieve 14,000 lbs. rating. Consult tow vehicle owners manual for maximum towing capacities.

• Cold forged for superior strength• when installing hitch balls, torgue all 3/4” shank dia. (B) balls to 160 ft. lbs., 1” shank dia. (B) balls to 250 ft. lbs., and 1-1/4” shank dia (B) balls to 450 ft. lbs.

ball Dia. a

finish

zinc chromeshank Dia. b

shank lengTh c

DrawbarThickness

range

gTw gvwr

raTingbulk hiTch balls *1-7/8” 63811 63810 3/4” 1-1/2” 3/8”-5/8” 2,0001-7/8” 63813 63812 3/4” 2-3/8” 3/8”-1-3/8” 2,0001-7/8” - 63814 3/4” 3-3/8” 3/8”-2-1/8” 2,0001-7/8” 63817 63816 1” 2-1/8” 3/8”-3/4” 2,0001-7/8” 63819 63818 1” 3-3/8” 3/8”-2-1/8” 2,000

2” 63821 63820 3/4” 1-1/2” 3/8”-5/8” 3,5002” 63823 63822 3/4” 2-3/8” 3/8”-1-3/8” 3,5002” - 63824 3/4” 3-3/8” 3/8”-2-1/8” 3,5002” 63827 63826 1” 2-1/8” 3/8”-3/4” 6,0002” 63829 63828 1” 3-3/8” 3/8”-2-1/8” 6,0002” 63831 63830 1-1/4” 2-3/4” 3/8”-1” 8,000

2-5/16” 63833 63832 1” 2-1/8” 3/8”-3/4” 6,0002-5/16” 63835 63834 1-1/4” 2-3/4” 3/8”-1” 12,0002-5/16” - 63836# 1-1/4” 2-3/4” 3/8”-1” 14,0002-5/16” - 63838# 1-1/4” 2-3/4” 3/8”-1” 17,000

packageD hiTch balls1-7/8” 63881 63880 3/4” 1-1/2” 3/8”-5/8” 2,0001-7/8” - 63882 3/4” 2-3/8” 3/8”-1-3/8” 2,0001-7/8” 63885 63884 1” 2-1/8” 3/8”-3/4” 2,000

2” 63888 63887 3/4” 1-1/2” 3/8”-5/8” 3,5002” - 63889 3/4” 2-3/8” 3/8”-1-3/8” 3,5002” 63892 63891 1” 2-1/8” 3/8”-3/4” 6,000

2-5/16” 63895 63894 1” 2-1/8” 3/8”-3/4” 6,0002-5/16” 63897 63896 1-1/4” 2-3/4” 3/8”-1” 12,000

packageD hiTch balls (6 pack reTail Display)1-7/8” - 63810-006 3/4” 1-1/2” 3/8”-5/8” 2,0001-7/8” - 63816-006 1” 2-1/8” 3/8”-3/4” 2,000

2” - 63826-006 1” 2-1/8” 3/8”-3/4” 6,0002-5/16” - 63832-006 1” 2-1/8” 3/8”-3/4” 6,000

packageD sTainless sTeel hiTch balls1-7/8” Stainless

SteelFinish

63851 1” 2-1/8” 3/8”-3/4” 2,0002” 63852 1” 2-1/8” 3/8”-3/4” 6,000

2-5/16” 63853 1” 2-1/8” 3/8”-3/4” 6,000

we offer ball mounts and drawbars in three separate styles: straight cut, angle cut and drop cut. refer to the styles below to select the mount that best suits your needs.

3590 35943593

36051 36063 36071

83637

28351

28451

Drawbar Types

HITCH ACCESSORIES

Drop Not availaBle

B

parT no. raTing (lbs.) gTw/Tw ball hole size a lengTh b rise c Drop sTyle3590 2,000/200 3/4” 6-5/8” 5/8” N/a 13591 2,000/200 3/4” 9-3/4” 5/8” N/a 13592 2,000/200 3/4” 9-3/4” 2-1/8” 2-3/4” 23593 2,000/200 3/4” 6-5/8” 2-1/8” 2-3/4” 33594 2,000/200 3/4” 10” 4” N/a 2

• Boxs includes drawbar, pin and clip• Black powder coat finish

• Boxs includes drawbar, pin and clip• Black powder coat finish

Note: Class i drawbar applications are specific. the correct replacement drawbar part number is listed on each

Class i hitch installation instruction sheet.

class i Drawbar kiTs

class ii Drawbar kiTs parT no. raTing (lbs.) gTw/Tw ball hole size a lengTh b rise c Drop sTyle

36051 3,500/300 3/4” 7” 5/8” 1-1/4” 136053 3,500/300 3/4” 9-3/4” 5/8” 1-1/4” 136061 3,500/300 3/4” 9-3/4” 3-1/8” N/a 236063 3,500/300 3/4” 11-3/4” 3-1/8” N/a 236065 3,500/300 3/4” 10” 5” N/a 236071 3,500/300 3/4” 7-3/16” 2-5/8” 3-1/4” 336078* 3,500/300 3/4” 7-3/8” - 4-3/4” 3

* Fits 1-1/4” oem Ford explorer, lincoln aviator & mercury mountaineer hitchNote: Class ii drawbar applications are specific. the correct replacement drawbar part number is listed on each Class ii hitch installation instruction sheet.

STYLE 1 STYLE 2 STYLE 3

specialTy ball mounTs

65801420

1422

1424

7390

• Shank can be used in rise or drop position • Black powder coat finishNote: hitch ball, pin (55010) and clip (55515) sold separately. Not interchangeable with weight distribution replacement parts

adjustable ball mounts are perfect for those who tow multiple trailers of varying coupler heights.

solid steel hitch balls engineered to meet all safetyrequirements of vesc regulation v-5

Page 2: HITCH ACCESSORIES inTerchangeable hiTch ball

WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

parT no. qTy. DescripTionhiTch ball wrench

62342 1

hitch Ball wrench, boxed end 1-1/8” & 1-1/2”

ball mounTs

ball mounTs

selecTing The proper ball mounT: ball mounT measuremenTsrise

Distance from the top of the shank to the

top of the ball platform

rise

DropDistance from the top of the shank to the top

of the ball platform

drop

oNe wreNCh tiGhteNiNG SyStem interlock™ balls and ball mounts act as a “one wrench tightening System” when used together. Standard hitch balls and ball mounts may also be used with interlock™ products but require two wrenches for installation.

when installing interlock• ™ hitch balls, torque all 1” shank balls to 250 ft. lbs.

interlock• ™ solid steel hitch balls are engineered to meet all safety requirements of veSC regulation v-5.

inTerlock™ hiTch balls & ball mounTs

no more scraTcheD or marreD hiTch balls

62342

62342

40792

63842

62807

parT no.

bulk parT no.

raTing (lbs.) gTw/Tw

ball hole size

a lengTh

b rise

c Drop sTyle

max frame mounT kiTs - class iii/iv (2” ball mounT)2923 - 6,000/600 1” 8-1/2 3/4” 2” 22953 - 6,000/600 1” 9” 2-3/4” 4” 2

easy loaD ball mounTs (2” x 2” shank & angle cuT Design)*40342 40342-006 6,000/600 1” 8-1/2” 3/4” 2” 2*40343 40343-006 6,000/600 1“ 10-1/2” 3/4” 2” 2*40344 40344-006 6,000/600 1” 9” 2-3/4” 4” 2*40345 40345-006 6,000/600 1” 11” 2-3/4” 4” 2*40346 40346-002 6,000/600 1” 9-3/4” 4-3/4” 6” 2

uTiliTy ball mounTs (2” ball mounT & bulk boxeD)*2736 2736-006 5,000/500 1” 12” 3/4” 2” 1*2793 2793-002 5,000/500 1” 10” 6-3/4” 8” 3*2706 - 3,500/350 1” 9” 9-3/4” - 3

- - 5,000/500 1” 9” - 11

packageD angleD cuT ball mounTs (2” ball mounT)40446 - 6.000/600 1” 10-1/2” 3/4” 2” 240445 - 6.000/600 1” 11” 2-3/4” 4” 240446 - 6.000/600 1” 9-3/4” 4-3/4” 6” 2

parT no. raTing (lbs.) gTw/Tw

a lengTh

c Drop

ball size secure

class iii sTanDarD Towing sTarTer kiTs (2-pack)40563-002 6,000/600 8-1/2” 2” 2” pin/Clip40564-002 2,000/600 8-1/2” 2” 1-7/8” pin/Chip40566-002 6,000/600 9” 4” 2” pin/Clip

parT no. DescripTionTowing sTarTer kiTs

40349 towing Starter Kit, 6,000 Gtw rating

parT no.

raTing (lbs.) gTw/Tw

ball hole size

a lengTh

b rise c Drop sTyle

soliD forgeD ball mounTs (black powDer coaT finish)40330 12,000/1,200 1-1/4” 8-1/2” 1” 2” -40331 12,000/1,200 1-1/4” 9-1/4” 3” 4” -40332 12,000/1,200 1-1/4” 10-1/4” 5” 6” -

aluminum soliD forgeD ball mounTs (aluminum finish)40381 8,000/800 1” 9-7/8” 1” 2” -40382 8,000/800 1” 10-5/8” 3” 4” -40383 8,000/800 1” 11-7/8” 5” 6” -40384 6,000/600 1” 10-7/8” 7” 8” -

sTainless sTeel ball mounTs40172 6,000/600 1” 9” 3/4” 2” -40176 6,000/600 1” 9-1/2” 2” 3-1/4” -

class iv ulTra frame hollow shank ball mounTs (black powDer coaT finish)40200 10,000/1,000 1-1/4” 8-1/2” 3/4” 2” 140201 10,000/1,000 1-1/4” 9” 2-3/4” 4” 340202 10,000/1,000 1-1/4” 11-1/4” 2-3/4” 4” 340205 10,000/1,000 1-1/4” 9” - 6” 340206 10,000/1,000 1-1/4” 9” - 8” 3

class iv ulTra frame soliD shank ball mounTs (Durable zinc coaTeD finish)4280 12.000/1,200 1-1/4” 8-1/2” 1” 2” 14284 12,000/1,200 1-1/4” 12” 1” 2” 14081 12,000/1,200 1-1/4” 8-1/2” 3” 4” 34285 12,000/1,200 1-1/4” 12” 3” 4” 34282 12,000/1,200 1-1/4” 9-1/2”” 5” 6” 34283 12,000/1,200 1-1/4” 9-1/2” 7” 8” 3

Note: * piN aND Clip Not iNCluDeD

40342

40443 2923

2736

40172

40176

40330

40331

40332

40381

40382

40384

• Solid one- piece forged construction• 1” thick x 3” wide ball platforms• angled, easy-load design

• 2” receiver opening• Brushed stainless steel ball mount (Draw-tite & reese)• polished stainless steel ball mount (hidden hitch)• resists rust and corrosion• available in 2” and 3-1/4” drops with same angle cut as quick- loading ball mounts

sTyle 3

sTyle 1

42804282

• 2” square solid shanks• 1-7/8” and 2” hitch ball interchangeable hitch ball system• 1” shank• Standard ball mount: 8-1/2” length, 3/4” rise, 2” drop• includes pin and clip• Black powder coat finish

• point of purchase retail display• two kits per display box• 2” square box opening

40349

40563-002

• includes 2” hitch ball• includes receiver lock• Black powder coat finish

Towing sTarTer kiTs

parT no. ball Dia. shank Dia. shank lengTh lifT capaciTy (lbs.)chrome inTerlockTm hiTch balls

62807 1-7/8” 1” 2” Standard 2,000 lbs.62803 2” 1” 2” Standard 6,000 lbs.62806 2-5/16” 1” 2” Standard 6,000 lbs.

sTainless sTeel inTerlockTm hiTch balls63842 1-7/8” 1” 2” Standard 2,000 lbs.63843 2” 1” 2” Standard 6,000 lbs.63844 2-5/16 1” 2” Standard 6,000 lbs.

class iii inTerlockTm ball mounTs40792 1” 9” 2” 3/4” 6,000/60040793 1” 9-1/2” 3-1/4 2” 5,000/50040794 1” 10” 5-1/4 2” 5,000/500

• includes pin and clip• Black powder coat finish

parT no. raTing (lbs.) gTw/Tw a lengTh b rise c Drop secureclass iii inTerlock Towing sTarTer kiTs

40565 6,000/600 8-1/2” 3/4” 2” lock

8041063037

57615762

parT no. DescripTion ball mounT gTw/Tw (lbs.)

clevis mounT gTw/Tw (lbs.) lengTh

clevis mounTs5761 3/4””hole 3,500/350 5,000/350 9-3/4”

5762 1” hole 6,000/600 6,000/600 8-7/8”

80410* 1” hole 6,000/600 6,000/600 11”

6201 1” hole 6,000/600 10,000/1,000 8-7/8”

5763 3/4” dia. - - 4-1/4”

5764 1” dia. - - 4-3/4”

• For use with industrial/ agricultural equipment

* Ball mount has 1-1/4” drop, Clevis has 3” drop

• includes 2” hitch ball, pin & clip

lengThDistance from the center

of the ball hole to the center of the pin hole

length

sTyle 3 Drop cuT:

sTyle 2 angle cuT:

HITCH ACCESSORIES

parT no. qTy. DescripTionclevis & ball mounT combo

63037 1 8-1/2” length, 6,000 Gtw

Page 3: HITCH ACCESSORIES inTerchangeable hiTch ball

WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

parT no. qTy. DescripTionhiTch ball & ball mounT bags

7627 1 (ball mount not included)6352 1 (ball not included)

Conveniently stores • interchangeable and removable hitch balls when not in use• Features a hook and loop closure to secure ball and keep vehicle clean• Durable nylon design provides years of use

80404

80405

80406

80401

80403

80402

80407

8041580408

80400 80470

7627

6352

parT no. DescripTion raTing (lbs.) gTw/Tw shank lengTh ball size rise or Drop2-ball hollow shank

80404 2-Ball Ball mount, Black hollow Shank

2,000/200 6,000/600 - 1-7/8” 2” rise

Drop

80405 2-Ball Ball mount, Black hollow Shank

2,000/200 6,000/600 - 1-7/8” 2” Drop

rise

80406 2-Ball Ball mount, Black hollow Shank

6,000/600 6,000/600 - 2”

2-5/16”Droprise

2-ball soliD shank

80401 2-Ball Ball mount, Black Solid Shank

2,000/200 6,000/600

8”8”

1-7/8”2” -

80402 2-Ball Ball mount, Chrome Balls, Black, Solid Shank

6,000/60010,000/1,000

8”8”

2”2-5/16” -

80403 2-Ball Ball mount, Black Solid Shank

2,000/600 6,000/600

8”8”

1-7/8”2” -

80407 2-Ball Ball mount, Chrome Balls, Black, Solid Shank

6,000/60010,000/1,000

8”8”

2”2-5/16” -

3-ball soliD shank

80408 3-Ball Ball mount Black Solid Shank & Balls

2,000/2006,000/600

10,000/1,000

8”8”

6-3/4”

1-7/8”2”

2-5/16”-

80415 3-Ball Ball mount, Chrome Balls, Black Solid Shank

2,000/2006,000/600

10,000/1,000

8”8”

6-3/4”

1-7/8”2”

2-5/16”-

reversible ball mounTs

hiTch accessories

parT no. qTy. DescripTionbumper guarD, “The hiTch guiDe-anD-sTop”

80400 1 Black80470 1 Diamond plate

parT no. qTy. DescripTionreceiver aDapTers

80300 1 2” to 1-1/4”, 7” long, 3,500 lbs.

80301 1 2” to 1-1/4”, 14” long, 3,500 lbs.

80302 1 2” to 1-1/4”, 18” long, 3,500 lbs.

80303 1 1-1/4” to 2”, 6” long, for Class ll only; 3,500 lbs.

80304 1 1-1/4” to 2”, 6”, 10” long, for Class ll only; 3,500 lbs.

parT no. DescripTion. wc (lbs.) wD (lbs.) lengThreceiver exTensions

80307 receiver extension 3,500 - 8”80305 receiver extension 3,500 - 14”80306 receiver extension 3,500 - 18”

45292 titantm receiver extension

6,0004,500

8,0006,000

24”34”

45018 titantm receiver extension

5,0004,000

7,5006,000

41”48”

protects vehicle from coupler impact while backing up• •mounts to any ball mount with 1” hole•mounting surface must be flat

45292 80306

80300

80301

80303

8030480302

FORMERLY

NEW PRODUCT!

NEW!

UPRATED!

NOW UPRATED!

NEW OFFERING!

• ideal for cargo carriers & bike carriers• Designed to extend the receiver opening from 6” to 18”• use of this adapter reduces hitches’ tow rating by 50% & with a maximum rating of 3,500 lbs towing capacity

ideal for slide-out campers with extended • overhangs• Designed to extend the receiver opening 14”, 18”, 24”, 34”, 41” or 48”• 2” opening for use with standard ball mounts and hitch-mounted accessories• For use with receivers only• integrated electrical bracket attached

allows Class ii balls (3/4” shank) to be used in Class iii • ball mounts (1” hole) - applies to 80100• allows Class iii balls (1” shank) to be used in Class iv ball mounts (1-1/4” hole) - applies to 80106

• weight rating as per ball being used• 2” square hollow shank, rated up to 6,000 lbs. Gtw/600 lbs. tw

pinTle hooks & accessories

63013630146301563016

630106301163012

63020

630176301863019

63032

63056 63057

63058

63059

parT no. shank raTing (lbs.) gTw/Tw

shank lengTha b

shank Dia. / h

heighTc

wiDThD

holee

wiDTh f

heighTg

holeseTs

receiver exTensions63056 hollow 6,000/600 7-5/8” 3” 2” 5-1/2” 5” 17/32” 3-3/8” 1-3/4” 363057 Solid 12,000/1,200 7-5/8” 3-1/4” 2” 7-1/2” 5” 17/32” 3-3/8” 1-3/4” 463058 Solid 8,000/800 11-3/8” 3-1/4” 2” 12-1/2” 5” 17/32” 3-3/8” 1-3/4” 763059 Solid 12,000/1,200 11-3/8” 3-1/4” 2” 7-1/2” 5” 17/32” 3-3/8” 1-3/4” 445156* hollow 12,000/1,200 7-3/4” 3-1/4” 2-1/2” 6” 5” 17/32” 3-3/8” 1-3/4” 3

Converts receivers • for use with pintle- type trailers, quickly and easily• provides mounting for both ball and pintle and rigid type pintle hooks• pin and clip must be ordered separately

*titan pintle hook adapter mount

parT no. qTy. DescripTionpinTle hooks (incluDes mounTing harDware)

63013 1 5 ton, 2,000 lbs. max. vertical load, 10,000 lbs. Gtw63014 1 10 ton, 4,000 lbs. max. vertical load, 20,000 lbs. Gtw63015 1 15 ton, 6,000 lbs. max. vertical load, 30,000 lbs. Gtw63016 1 30 ton, 14,000 lbs. max. vertical load, 60,000 lbs. Gtw63032 1 replacement hardware mounting Kit

pinTle hook combinaTion hiTches (incluDes mounTing harDware)

63010 1 1-7/8” Combo hitch, 16,000 lbs. Gtw, ball rating 6,000 lbs.63011 1 2” Combo hitch, 16,000 lbs. Gtw, ball rating 10,000 lbs.63012 1 2-5/16” Combo hitch, 16,000 lbs. Gtw, ball rating 14,000 lbs.63032 1 replacement hardware mounting Kit

replacemenT parTs63017 1 1-7/8”” replacement Ball, 6,000 lbs., 1-1/4” diameter 63018 1 2” replacement Ball, 10,000 lbs., 1-1/4’ diameter63018 1 2-5/16” replacement Ball, 14,000 lbs., 1-1/4” diameter63020 1 replacement Snapper pin43031 1 5/16” Safety pin63032 1 replacement hardware mounting kit

parT no. qTy. DescripTion

28023 1 lunette ring lock (fits 2-1/2” & 3” diameter lunette rings)

4210 1 lunette ring lock

63023 1 lunette ring, 2-1/2” diameter with 4 hole base 42,000 lbs. Gtw

63033 1 hardware mounting Kit for 63023

63022 1 lunette ring, 2-1/2” diameter with 1-1/2” shank 15,000 lbs. Gtw

63021 1 adjustable lunette ring, 3” diam-eter w/channel 12,000 lbs. Gtw

parT no. qTy. DescripTionreDucer bushing

80100 1 1” oD to 3/4” iD80106 1 1-1/4” oD to 1” iD

63023

63022

28023

63021

luneTTe rings

HITCH ACCESSORIES

Page 4: HITCH ACCESSORIES inTerchangeable hiTch ball

WWW.CROFTTRUCKSA.COM CALL 210-773-9494WWW.CROFTHITCH.COM 1503 N. BRAZOSWWW.CROFTTRUCKEQUIP.COM AT IH-10 BETWEEN CULEBRA & N. COLORADO EXITS

FORMERLY

NEW PRODUCT!

NEW!

UPRATED!

NOW UPRATED!

NEW OFFERING!

53515352

194401944-010

5363 701007010-0247050

5362

678806788-0101202

01202-0245363

2211

5330

4011340114

6430

6431

6430

6435

6432

6434

6433

6429

attractive point-of-purchase packaging• Foam gasket included for exact fit• heavy chrome face features popular oem manufacturer logos • oem licensed

63041

6304663047

6304563043

sTabilizing pin wiTh lockmore than just a hitch pin, J-pin® quickly and confidently secures ball mounts and other hitch-mounted accessories, eliminating the sway and rattle caused by part clearance issues.J-pin® ready receiver design allows for the most confident and secure hookup in today’s towing market by compressing the hitch-mounted accessory against the inner side wall of the hitch receiver tube. once attached, the hitch and towing components seem virtually welded together. packaged complete with its integral ball mount lock, J-pin® makes your towing system complete.

insert J-pin® through large hole in receiver hitch

tighten nut on J-pin® shaft, compressing ball mount or hitch-mounted accessory

against receiver tube

Secure ball mount or hitch-mounted accessory

with locking head

06237

63201

55010

63240

FORMERLY

NEW PRODUCT!

NEW!

UPRATED!

NOW UPRATED!

NEW OFFERING!

pins and clips are included with all class i and ii hitches.

Tube covers

pins, clips & j-pin® pins, clips & j-pin®

hiTch locks

63223

63211

63212

63215

63205

63235 63237

trailer Guardian locks• helps prevent accidental decoupling • ability to lock and secure the trailer on the tow vehicle•two piece construction

parT no. qTy. DescripTionlogo receiver Tube covers

6430 1 Draw-tite “D” logo, fits all 2” receivers

6431 1 Chevrolet logo, fits all 2” receivers

6432 1 Dodge ram logo, fits all 2” receivers

6433 1 Ford oval logo, fits all 2” receivers

6434 1 GmC logo, fits all 2” receivers

6435 1 Jeep logo, fits all 2” receivers

6429 1 adapts 6430-6435 tube Covers to 1-1/4” receivers

parT no. qTy. DescripTionsilenT hiTch pin anD lock sysTem

63232 1 Class lll Silent hitch pin

63232

FORMERLY

NEW PRODUCT!

NEW!

UPRATED!

NOW UPRATED!

NEW OFFERING!

eliminates noise associated with hitch accessories rattling against receiver tube. unique design holds drawtube tight inside hitch receiver tube. For use with hollow shank ball mounts only.

j-pin®anTi-raTTle pin w/barrel lockseT

receiver Tube coversparT no. qTy. maTerial color

sporTframe anD frame hiTch, 1-1/4” square receivers:

5354 1 Disp. pkg. metal Chrome

5362 1 Disp. pkg. plastic Black

2211 1 Bulk rubber Black

2” square receivers:1944 1 Disp. pkg. plastic Chrome

01944-010 10 Bulk plastic Chrome

5352 1 Disp. pkg. metal Chrome

1202 1 Disp. pkg. plastic Black

01202-024 24 Bulk plastic Black

5363 1 Disp. pkg. plastic Black

5330 1 Disp. pkg. rubber Black

6788 1 Disp. pkg. rubber Black

06788-010 10 Disp. pkg. rubber Black

7010 1 Bulk rubber Black

07010-024 24 Bulk rubber Black

7050 1 Disp. pkg. rubber Black

specialTy receiver Tube coversparT no. qTy. DescripTion maTerialsporTframe anD frame hiTch, 1-1/4” square receivers:

8895 1 Disp. pkg.

uS Flag receiver tube Cover plastic

40113 1 Disp. pkg.

propeller receiver tube Cover, Chrome look plastic

2” square receivers:

8896 1 Disp. pkg.

uS Flag receiver tube Cover plastic

40114 1 Disp. pkg.

propeller receiver tube Cover, Chrome look plastic

parT no. qTy. DescripTionswivel pins (packageD)

63202 1 1/2” integral pin & Clip, stainless

63203 1 5/8” integral pin & Clip, stainless

63204 1 1/2” integral pin & Clip, zinc

63205 1 5/8” integral pin & Clip, zinc

hiTch locks wiTh 1/2” DiameTer63211 1 Stainless Steel lock for 1-1/4” receivers

63214 1 Deadbolt pro-tech lock for 1-1/4” receivers

63216 1 Deadbolt lock for 1-1/4” receivers

63224 1 Bent pin Deadbolt lock for 1-1/4” receivers

63234 1 universal hitch lock w/Sleeve for 1-1/4”, 2”, & 2-1/2” rec.

hiTch locks wiTh 5/8’ DiameTer63212 1 Stainless Steel lock for 2” rec.

63215 1 Deadbolt pro-tech lock for 2” rec.

63217 1 Deadbolt lock for 2” rec.

63223 1 Bent pin Deadbolt lock for 2” or 2-1/2” rec.

63231 1 Bent pin lock w/barrel body for 2” or 2-1/2” rec.

63234 1 universal hitch lock w/Sleeve for 1-1/4”, 2” & 2-1/2” rec.

parT no. qTy. DescripTion max gTw ball gTw max vlone-piece pinTle hook

63043 1 5-ton receiver mount 10,000 - 2,000

one-piece pinTle combinaTions63040 1 1-7/8” receiver mount 12,000 2,000 2,400

63041 1 2” receiver mount 12,000 7,000 2,400

63042 1 2-5/16” receiver mount 12,000 12,000 2,400

receiver mounT Tow eyeleT63045 1 Forged receiver mount tow eyelet, 10,000 lbs. Gtw, 7-3/4” length

receiver mounT Tow hooks63044 1 Forged receiver mount tow hook, 10,000 lbs. Gtw, 7-3/4” length

63047 1 receiver mount tow hook, 8,000 lbs. Gtw, 7” length

receiver mounT Tow ring63046 1 receiver mount tow ring, 8,000 lbs. Gtw, 7-3/8” length

parT no. qTy. DescripTionpins & clips

63241 1 pkg. Class l/ll pin & Clip, 1/2”, groove style

63241-050 50 Class l/ll pin & Clip, 1/2”, groove style (50-pk)

63240 1 pkg. Class lll/lv pin & Clip, 5/8”, groove style

63240-050 50 Class lll/lv pin & Clip, 5/8”, groove style (50-pk)

63242 1 pkg. Class lll/lv pin & Clip, 5/8”, hole style

63242-050 50 Class lll/lv pin & Clip, 5/8”, groove style (50-pk)

63242-100 100 Class lll/lv pin & Clip, 5/8”, groove style (100-pk)

63242-500 500 Class lll/lv pin & Clip, 5/8”, hole style (500-pk)

63243 1 pkg. Class v pin & Clip, 5/8”, hole style

63243-050 50 Class v pin & Clip, 5/8”, groove style (50-pk)

06237 1 Class l/lv pin & Clip, 1/2”, groove style

06237-050 50 Class l/lv pin & Clip, 1/2”, groove style (50-pk)

55010 1 Class lll/lv pin & Clip, 5/8”, groove style

55010-050 50 Class lll/lv pin & Clip, 5/8”, groove style (50-pk)

55515 1 Bulk Clip

55515-050 50 Bulk Clip (50-pk)

HITCH ACCESSORIESHITCH LOCKS

parT no. qTy. DescripTion

combo locks (hiTch anD Trailer)

63235 1 Single arm lock for 2-1/2” wide Ball mnt. platform w/1” Ball hole

63236 1 Dual arm lock for 2-1/2” wide Ball mnt. platform w/1” Ball hole

63237 1 Single arm lock for 3” wide Ball mnt. platform w/1” Ball hole

63237 1 Dual arm lock for 3” wide Ball mnt. platform w/1” Ball hole

63044