HSTP Range

1

Hig

hw

ays

Squa

re T

rolle

y Pol

e

Highways Square Trolley PoleHSTP Range

The brand new HSTP Highways Square Trolley Pole is the latest innovation in square CCTV trolley poles and is an ideal column for urban and traffic CCTV schemes.

Built to complement our extensive range of highway masts as well as boasting a number of new and improved features, it has endured rigorous in-house enhanced testing.

Designed in accordance with the Highways Specification under the sector 6 scheme, the unique features of the HSTP Highways Square Trolley Pole provide a greater reliability of operation and ease of use for the engineer.

Available in heights of 4 metres to 15 metres, the pole comes with a galvanised finish as standard and optional specialist paint finishes to match any highways scheme.

Sales Direct: +44 (0)1254 700200 w: www.wec.uk.net | e: all@wec.uk.net

Hig

hw

ays

Squa

re T

rolle

y Pol

e

HSTP Range

DESIGN FEATURES- An ideal column for urban & traffic CCTV Schemes- Square section pole design for maximum carriage stability- Designed in accordance with Highways Specifications under the sector 6 scheme- Eliminates the use of mechanical lifts for servicing purposes- Camera maintenance carried out at ground level for safety and ease of maintaince- Built in winch unit with dual cable barrel feature- Battery drill winch operation- Unit is lowered to ground level in less than 2 minutes from 15 metres high- Excellent stability characteristics ensures minimal camera movement- Twin and single arm versions available- Totally concealed cable management system- High security flush fitting door- Extra low positioning door aperture. Lower door positioning also optional (idea for plinth mounted applications)- Single action dual camera/lighting lowering mechanism- Galvanised to BS EN ISO 1461:2009- Specialist paint finishes available- Carriage stop indication (Bell sounder)- Custom versions available to suit all applications

GENERAL SPECIFICATIONS- Arms supplied with standard pan and tilt fixing of 101.6 PCD- Built in cable entry and exit points- HA root bases - templates and bolts supplied as standard- Standard heights available from 4 to 15 metres- Compatible with WEC adaptors and accessories

PRODUCT CODES- HSTP4- HSTP6- HSTP8- HSTP10- HSTP12- HSTP14- HSTP15

TECHNICAL SUPPORT

Our in-house design facility enables us to manufacture towers to any customer specification. The technical sales departmentwill offer expert advise on any exact requirements. Full training and instruction on the erection of towers, fixings, safe use and procedures is available on all WEC products. Project engineers,installation teams and service engineers, will all benefit frompractical demonstrations, all of which can be shown on our own test site facility.

Highways Square Trolley PoleHSTP Range

Highways Square Trolley Pole

2

Single action lowering mechanism

3

Hig

hw

ays

Squa

re T

rolle

y Pol

e

Highways Square Trolley PoleHSTP Range

All WEC products are subject to ongoing development. Therefore, we reserve the right to make technical modifications without notice. BRITANNIA HOUSE, JUNCTION STREET, DARWEN, LANCASHIRE, BB3 2RB. TEL: (01254) 700200. E-MAIL: all@wec.uk.net

TECHNICAL SPECIFICATION

Arm Motion Arm Motion

250sq

250sq Cable Access

'M'

Hei

ght

250sq

Internal Pulley Aidcable management Closed top cap

Saftey Latch Saftey Latch

PTZ Camera Mount Fixing 4 hole on a 101.6 PCD

Carriage Rest Stop

Flush Fitting Door Aperture

Dual Lowering arms single Lowering arms

lower position

STANDARDS APPLICABLE- ILE TR7 The Institution of Lighting Professionals high masts for lighting and CCTV.- BD94/07 design of minor structures- BS5950:1:2000 structural use of steelwork- BS EN 1991:1-4 : 2005 wind actions - Structural Steelwork: BS EN 1090-2:2008- General Steelwork: BS1449:1991, BS1387:1985, BS EN 10025:1993- Hot Dipped Galvanized: BS EN ISO 1461:2009- Welding Procedures: Comply with BS EN 1090-2:2008- Fasteners: Grade 8.8 BS3692:2001, BS4190:2001, DIN931, DIN934- Design Wind Loading: In accordance with CP3 chapter V Pt 2 & BS 6399 Pt 2:1997- UK national annex to Eurocode 1 - part 1-4 - wind actions

0086-CPR-613630

BS/EN 1090

64

Hig

hw

ays

Squa

re T

rolle

y Pol

e

Highways Square Trolley PoleHSTP Range

Sales Direct: +44 (0)1254 700200 w: www.wec.uk.net | e: all@wec.uk.net

10

660

660

View On A

Formed Winch Mounting Plate

250 x 250 x 10 Hot Formed Box section

A

500

600

300

497

200 10

203

660

10

View On A

660

Formed Winch Mounting Plate

250 x 250 x 10 Hot Formed Box section

500

200

203

497

200 10

Plynth Mounted Pole Standard Mounted Pole

5mm Thk Inner frame

Ø584

Holes to suit M24 + M27 root fixings

Holes to suit M24 + M27 root fixings

Bell sounder( Carrige stop indication)

Bell sounder( Carrige stop indication)

Support Gussets Support Gussets

Flush fitting door with 2 x security locks

Flush fitting door with 2 x security locks

A

DOOR AND BASEPLATE DETAILS

Battery drill winch operation Carriage stop indication (Bell sounder)

HA root bases - templates and bolts supplied as standard

5

Hig

hw

ays

Squa

re T

rolle

y Pol

e

Highways Square Trolley PoleHSTP Range

All WEC products are subject to ongoing development. Therefore, we reserve the right to make technical modifications without notice. BRITANNIA HOUSE, JUNCTION STREET, DARWEN, LANCASHIRE, BB3 2RB. TEL: (01254) 700200. E-MAIL: all@wec.uk.net

A minimum soil bearing pressure of 75 KN/m2 is assumed

INSTALLATION METHOD

1. From the map, select location of installation2. Excavate as per recommended area and depth3. Assemble root base as shown in fig. 14. Insert root base into the hole ensuring that it is level and that the four studs protrude 60-70mm above the concrete foundation5. Fit the cable duct if routing via the interior of the column. A plastic pipe of approximately 100mm outside diameter is recommended for this. Ensure this protrudes through the template by 50mm minimum.6. Pour concrete ensuring that it is a mix of C35 to table 6 BS 8110 and then tamp down well7. Fit the setting template over the four protruding studs, double-checking that they are level and that clear access can be gained to the cable duct if it is being used8. Leave the concrete to cure for a minumum of 72 hours prior to attempting to erect the column9. When fitting the column, ensure that the concrete base is in complete contact with the underside of the column and grout accordingly. Torque the nuts to 230-270 Nm (175-200 fl. lb.) 10. When the column has been fitted, protect the studs with a suitable protective coating. Denzo tape or similar is recommend for this

Foundation sizes are determined for three sets of wind speeds, which will cover most of the British Isles.

Area A = 44m/s (98mph)Area B = 48m/s (107mph)Area C = 52m/s (116mph)

Maximum gust speed is likely to be exceeded on average once every 50 years at 10m above the ground in open level country.

Concrete Foundations Table X x Y x Z

Model Ref. Ht.

Area of Country Area of Town

A B C A B C

HSTP4 4m 1.0x1.0x 0.5m Dp.

1.0x1.0x 0.5m Dp.

1.0x1.0x 0.5m Dp.

1.0x1.0x 0.5m Dp.

1.0x1.0x 0.5m Dp.

1.0x1.0x 0.5m Dp.

HSTP6 6m 1.1x1.1x 0.55m Dp.

1.2x1.2x 0.6m Dp.

1.3x1.3x 0.65m Dp.

1.1x1.1x 0.55m Dp.

1.2x1.2x 0.6m Dp.

1.2x1.2x 0.6m Dp.

HSTP8 8m 1.4x1.4x 0.7m Dp.

1.5x1.5x 0.75m Dp

1.5x1.5x 0.75m Dp

1.3x1.3x 0.65m Dp.

1.3x1.3x 0.65m Dp

1.4x1.4x 0.7m Dp.

HSTP10 10m 1.5x1.5x 0.75m Dp

1.6x1.6x 0.8m Dp.

1.7x1.7x 0.85m Dp.

1.4x1.4x 0.7m Dp.

1.5x1.5x 0.75m Dp.

1.6x1.6x 0.8m Dp.

HSTP12 12m 1.7x1.7x 0.85m Dp

1.8x1.8x 0.9m Dp

1.9x1.9x 0.95m Dp

1.6x1.6x 0.8m Dp.

1.7x1.7x 0.85m Dp

1.8x1.8x 0.9m Dp

HSTP14 14m 1.9x1.9x 0.95m Dp

2.0x2.0x 1.0m Dp

2.1x2.1x 1.05m Dp

1.8x1.8x 0.9m Dp

1.9x1.9x 0.95m Dp

2.0x2.0x 1.0m Dp

HSTP15 15m 2.0x2.0x 1.0m Dp

2.1x2.1x 1.05m Dp

2.2x2.2x 1.1m Dp

1.9x1.9x 0.95m Dp

2.0x2.0x 1.0m Dp

2.1x2.1x 1.05m Dp

BASE AND WINDLOAD SPECIFICATIONS

230

770

8 - M24 or M27 Root Studding

Z

X x Y

25 thkBaseplate

Section Thro'Stud Fixing

Plain Washer

M24 or M27 Full Nut Locking Nut

Connection Nut FlushWith Concrete Foundation

fig. 1