South Midlands Communicationswww.smc-comms.com

HF Transceiver IC-F8101

HF Transceiver IC-78

HF Transceiver IC-F7000

SPECIFICATIONSFrequency range Rx 0.030–29.999999 MHz*1

Tx 1.600–29.999999 MHz*2

*1-Guaranteed range: 0.5–29.999999 MHz*2-Not guaranteed for some frequency bands

Mode USB, LSB, CW, RTTY (FSK), AM

Number of memory Ch. 99 (Duplex) +1 (Call channel)

Frequency stability Less than ±200 Hz from 1 min. to60 min. after power ON. After that

rate of stability less than ±30 Hz/hr.at +25°C (+77°F). Temperature fluctuations

0°C to +50°C (+32°F to+122°F) less than ±350 Hz

Power supply requirement

13.8 V DC ±15 % (negative ground)

Current drain (at 13.8 V DC)

Receive: Stand-by 1.3 A

max. audio 2.0 A Transmit:

max. power 20.0 A

Operating temp. range –10°C to +60°C; +14°F to +140°F

Antenna connector SO-239 (50 Ω)

Dimensions (projections not

included)

240(W)×95(H)×239(D) mm97⁄16(W)×33⁄4(H)×913⁄32(D) in

Weight (approx.) 3.8 kg; 8 lb 6 oz

ACC connector 13-pin

REMOTE connector 2-conductor 3.5 (d) mm (1⁄8″)

HF TRANSCEIVER IC-78The IC-78 is a high performance HF transceiver. Innovative features such as 99 memory channels, high C/N ratio, direct channel entering, data communication capabilities and more, offer easy operation for anyone. All these features come in a compact, rugged package that can be conveniently used in a base station or in a vehicle, as you prefer.

Durable, powerful constructionThe IC-78 delivers a powerful 100 W of output power, providing the talk power you need to reach the most distant locations. Its one-piece, die-cast aluminum construction combined with a large heat sink, helps keep internal temperatures down and ensures that operation is stable at high duty cycles. And its compact size of 240(W)× 95(H)×239(D) mm* makes installation easy. *97⁄16(W)×33⁄4(H)×913⁄32(D) in.Simple operationThe IC-78 is equipped with a large easy-toread LCD. A minimum number of switches and controls allow for superior feature selectability. Keys access functions directly–there’s no secondary function key. You can enter your operating frequency*, or memory channel number directly from the 10- key pad. *depending on version

Ample 99 channels with 8-digit channel name capabilityAn affordable 99 duplex memory channels are available for storing individual transmit and receive frequencies, operating mode, filter setting, as well as 8-character channel names. You can enter channel assignments easily from the 10-key pad. In addition, an extra 1 call memory is available for storing the most often used, or most important frequency. An independent, one-touch recall switch is available.

Superior basic performanceA 4-element system is employed for the 1st receive mixer, providing superior receive IMD, especially from in-band, nearby interfering signals. A well-designed double-conversion system to help minimize image and spurious responses for better signal fidelity, is also built-in. A newly designed PLL circuit has been adopted to improve C/N ratio characteristics. The combination of the 4- element system mixer and new PLL circuit allows superior basic performance.

Front mounted loud speakerWith the speaker facing the operator, audio sounds can be clearly heard without impedimentduring operation. It is no longer necessary to manually increase the volume to try and capture audio sounds.High frequency stabilityWhen the optional CR-338 HIGH STABILITY CRYSTAL UNIT is installed, it allows up to±0.5 ppm of extremely high stable operation.Flexible filter selectionAn optional IF filter can be installed into the transceiver, providing 5 passband widths selectable in SSB, CW or RTTY modes.VFO mode operation*For continuous frequency operation, VFO mode operation* capability is available. It is convenient when searching for signals, around the programmed frequencies, such as short wave broadcasts, etc. *depending on version

Direct channel selectionA 10-key pad has been adopted on the front panel. A channel number, or an operating frequency*, can be entered from the keypad directly. Also, memory channel editing ispossible. A large channel selector and up/down keys are available to suit your operating style for your convenience. Total and simple operation is provided! *depending on version

Noise blankerTo reduce pulse-type noise, a level adjustable noise blanker is built-in. Various levels of pulse-type noise, such as from car ignitions, etc., can be reduced.

Pre-amp. and attenuatorA pre-amplifier and an RF attenuator are adopted for more pleasant reception. Convenient when weaksignals or extremely strong signals are received, to present better quality readability.

Cloning capabilityProgrammed data cloning capability between transceivers is available, so that an identical transceiver setting can be made immediately.

Built-in 2-tone alarm*The 2-tone alarm for an emergency signal transmission is built-in*. Independenttone switch is adopted for quick and simple emergency calls. *depending on version

SQL/RF gain controllerIn addition to the squelch control, an RF gain control is available, and the controller is combined with the squelch control. The RF gain adjusts minimum response receivergain, and ignores signals weaker than the pre-set level— providing pleasant stand-by, or scanning. The SQL/RF GAIN controller action is selectable from squelch only, RF gain only or combined, in the SET mode according to your operating style and mode.

Data communicationsIn addition to the current voice and key operation, FSK (First Shift Keying) type RTTY mode is available. By connecting a terminal unit or terminal node controller to the ACCsocket on the rear panel, data acquisition and text-base file transfers and other data communication can be made. On RTTY, shift width, tone frequencies and polarization are also selectable.

Other features• Built-in mic. compressor increases average talk power• Complete CW features• Variety of scanning function types• IF shift interference rejection• Built-in antenna tuner control circuitand selectable antenna tuner• Hand microphone is supplied• VOX capability, and more...

Superior features support serious communications

South Midlands Communications Ltd. SM House, School Close, Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLANDTel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: sales@smc-comms.com

HF TRANSCEIVER IC-F7000Advanced selective call and ALE make HF communication easier than ever!The IC-F7000 is an HF land mobile transceiver especially designed for long distance communications. Such communications used to require specially skilled operators, but the IC-F7000 makes HF LMR operation simple and efficient with the following advanced functions and features.

SPECIFICATIONSFrequency coverage

(Unit : MHz):Rx 0.5– 29.9999 (continuous)

Tx 1.6–29.9999** Some frequency ranges are not guaranteed.

Type of emission* : J3E (USB, LSB), J2B (AFSK), F1B (FSK), A1A (CW), A3E (AM)

* J3E and A3E only at factory default for Australia versionNumber of channels : 400 regular channels, 100 ALE channelsAntenna impedance : 50Ω (SO-239)

Power supply requirement :

13.8V DC (10.8–15.6V)

Current drain (at 13.8V DC):

Operating temp. range : –10°C to +60°CFrequency stability : ±50Hz (at –10°C to +60°C)

Dimensions (W×H×D; projections not included):Main unit 240×72×239mm; 9 7⁄16×2 27⁄32×9 13⁄32 in

Controller 150×50×51mm; 5 29⁄32×1 31⁄32×2 inSpeaker 106×62×46mm; 4 3⁄16×2 7⁄16×1 13⁄16 in

Weight :Main unit 4.6kg; 10.1lbController 220g; 7.7ozSpeaker 370g; 13oz

1-1-32, Kamiminami, Hirano-ku, Osaka 547-0003, Japan Phone: +81 (06) 6793 5302 Fax: +81 (06) 6793 0013 Count on us!URL: http://www.icom.co.jp/world/index.html

Printed in Japan

<Corporate Headquarters>2380 116th Avenue N.E., Bellevue, WA 98004, U.S.A.Phone : +1 (425) 454-8155 Fax : +1 (425) 454-1509URL : http://www.icomamerica.com<Customer Service> Phone : +1 (425) 454-7619

Communication EquipmentHimmelgeister Str. 100, D-40225 Düsseldorf, GermanyPhone : +49 (0211) 346047 Fax : +49 (0211) 333639URL : http://www.icomeurope.com

A.B.N. 88 006 092 575290-294 Albert Street, Brunswick, Victoria, 3056, AustraliaPhone : +61 (03) 9387 0666 Fax : +61 (03) 9387 0022URL : http://www.icom.net.au

Unit 9, Sea St., Herne Bay, Kent, CT6 8LD, U.K.Phone : +44 (01227) 741741 Fax : +44 (01227) 741742URL : http://www.icomuk.co.uk

Zac de la Plaine, 1, Rue Brindejonc des MoulinaisBP 5804, 31505 Toulouse Cedex, FrancePhone : +33 (5) 61 36 03 03 Fax : +33 (5) 61 36 03 00URL : http://www.icom-france.com

Crta. de Gracia a Manresa Km. 14,75008190 Sant Cugat del Valles Barcelona, SpainPhone : +34 (93) 590 26 70 Fax : +34 (93) 589 04 46URL : http://www.icomspain.com

146A Harris Road, East Tamaki, Auckland, New ZealandPhone : +64 (09) 274 4062 Fax : +64 (09) 274 4708URL : http://www.icom.co.nz

Glenwood Centre #150-6165 Highway 17, Delta, B.C., V4K 5B8, CanadaPhone : +1 (604) 952-4266 Fax : +1 (604) 952-0090URL : http://www.icomcanada.com

6F No. 68, Sec. 1 Cheng-Teh Road, Taipei, Taiwan, R.O.C.Phone : +886 (02) 2559 1899 Fax : +886 (02) 2559 1874URL : http://www.asia-icom.com

Icom America Inc. Icom (Europe) GmbH Asia Icom Inc.

1305, Wanshang Plaza, Shijingshan Road, Beijing, ChinaPhone : +86 (010) 6866 6337 Fax : +86 (010) 6866 3553URL : http://www.bjicom.com

Beijing Icom Ltd.Icom Spain S.L.

Icom (UK) Ltd.

Icom France S.a

Icom Canada

Icom (Australia) Pty. Ltd.

Icom New Zealand

Your local distributor/dealer:

JP98/14190QA TW03/00288EM

Icom Inc. (Japan), is an ISO 9001 and ISO 14001 certification

acquired company.

HF TRANSCEIVER

03ES0310 © 2003 Icom Inc.

SPECIFICATIONS

OPTIONS

HM-146 HAND MICROPHONERC-26 REMOTE CONTROLLERRemote function microphone andremote controller head. Same assupplied.

OPC-1286SHIELDED CONTROL CABLE10m (32.8ft) shielded controlcable connects between AT-140and transceiver.

AT230 AUTOMATIC TUNINGANTENNA(Moonraker Australia Pty. Limited)2.6m (8.5ft) length mobile mountwhip antenna covers 2–30MHzwith automatic tuning function. Continuous CW transmission at highpower not guaranteed with AT230.

SP-25 EXTERNAL SPEAKERExternal speaker. Same as sup-plied. Input impedance: 4Ω. Max.input power: 7W.

AH-2b ANTENNA ELEMENTFor mobile operation with the AT-140 or AT-130/E. All bands be-tween 7–30MHz can be matched.

MN-100 ANTENNA MATCHERMatch the transceiver to a dipoleantenna without applying DCpower. 8m×2 antenna wires comeattached.

MN-100L ANTENNA MATCHERMatch the transceiver to a long-wire antenna without applying DCpower. 15m×1 antenna wirecomes attached.

PS-60 DC POWER SUPPLYProvides 13.6V DC (30A) outputfrom an AC outlet.

AT-140 HF AUTOMATIC ANTENNA TUNERCovers 1.6–30MHz with a 7m (23ft) or longer wire antenna.AT-130/E is also available.

approx. 24.5 m; 80.3 ft

30 m; 98.4 ft

AH-710 FOLDED DIPOLE ANTENNA

Covers from 1.9 to 30MHz. Has anSO-239 connector. Easy to as-semble (non-kink construction).

OPC-1287SHIELDED CONTROL CABLE5m (16.4ft) shielded control cableconnects between MoonrakerAT230 and transceiver.

• Frequency coverage (Unit : MHz):Rx 0.5– 29.9999 (continuous)Tx 1.6–29.9999*

* Some frequency ranges are not guaranteed.• Type of emission* : J3E (USB, LSB), J2B (AFSK),

F1B (FSK), A1A (CW), A3E (AM)* J3E and A3E only at factory default for Australia version.

• Number of channels : 400 regular channels, 100 ALE channels

• Antenna impedance : 50Ω (SO-239)• Power supply requirement : 13.8V DC (10.8–15.6V)• Current drain (at 13.8V DC):

• Operating temp. range : –10°C to +60°C• Frequency stability : ±50Hz (at –10°C to +60°C)• Dimensions (W×H×D; projections not included):

Main unit 240×72×239mm; 97⁄16×227⁄32×913⁄32 inController 150×50×51mm; 529⁄32×131⁄32×2 inSpeaker 106×62×46mm; 43⁄16×27⁄16×113⁄16 in

• Weight : Main unit 4.6kg; 10.1lbController 220g; 7.7ozSpeaker 370g; 13oz

• Output power (Selectable) :Australia 1.6–29.9MHz 100, 50, 10W PEPGeneral 1.6–3.9MHz 125, 50, 10W PEP

4.0–29.9MHz 100, 50, 10W PEP• Spurious emissions : –43dB below peak output power• Carrier suppression : 40dB below peak output power• Unwanted sideband : 50dB below peak output power

(with 1500Hz AF Input)• Microphone impedance : 600Ω

• Sensitivity (pre-amp. ON) :

• Squelch sensitivity (at S-meter) : J3E (at 13.800MHz) Less than 10µV (threshold)

Less than 32mV (tight)A3E (at 1.000MHz) Less than 32µV (threshold)

Less than 320mV (tight)• Spurious response rejection ratio:

(1.6–29.9999MHz) More than 70dB• Audio output power : 4.0W typical at 10% distortion

(at 13.8V DC) with a 4Ω load• Clarity variable range : ±150Hz• Speaker connector : 2-conductor 3.5 (d) mm (1⁄8")/4Ω

GENERAL TRANSMITTER

RECEIVER

0.5 – 1.5999MHz

1.6 – 29.9999MHz

J3E (at 20dB SINAD)25.1µV emf

12.6µV1.0µV emf

0.5µV

A3E (at 20dB SINAD)200µV emf

100µV

—

Supplied accessories: Hand microphone, HM-146 External speaker, SP-25 Remote controller, RC-26 Microphone hanger DC power cable ACC plugs (8-pin DIN) Tuner connector kit Spare fuses Mounting bracket kits for main unit and remote controller

Unit: mm (inches)

6 (1

/4)

239.

3 (9

13/3

2)72

(2 2

7 /32

)

260 (101/4)

240 (97/16)

19 (3

/4)

DIMENSIONS

All stated specifications are subject to change without no-tice or obligation. Measurements made in accordance withAS/NZS4770-2000. (Australia version only)

RecommendedoptionRecommendedoption

Tx Rx2-Tone Voice Max. Audio

Australia 1.6–29.9MHz 15A 10A 3.0A

General 1.6–3.9MHz 17A 12A 3.0A4.0–29.9MHz 16A 11A

Selective callUses a unique calling address like a telephone number and allows you to make a call directly to a desired station or group. Compatible with other brands of radios.ALE (Automatic Link Establishment) functionThis function will check frequency propagation and strength to automatical-ly select the highest quality signal for the best communication possible.Versatile configurationThe controller and speaker are separated from the main unit. Also, the size of the main unit in particular has been reduced, so that the IC-F7000 can be installed almost anywhere.

SelcallMake an individual/group call using a unique 4-digit (or 6-digit) address. The receiving station sends back an acknowledge (ACK) signal and the scanning stops to allow you to communicate.

Other capabilities available with selective call and ALE

Selective beacon callSelective beacon call allows you to check the propagation before an individual/ group call.The receiving station sends back an ACK signal and continues scanning.GPS beacon callGPS beacon call*1 allows you to request the intended ID station to send position information.The receiving station automatically sends back position information.

GPS position callGPS position call*1 allows you to send your own position information to the intended ID station.Status callStatus call*1 requests to send radio status information including power supply voltage, output power and VSWR. This allows you to monitor the radio station from a remote location.

PagecallPagecall*1 allows you to send and receive up to 64-character text messages with the intended ID station. Received messages are recorded in the memory of the radio.TelcallTelcall*2 allows you to make a telephone call through a telephone interconnect service provid-er. Up to a 16-digit telephone number can be programmed.Emergency selcallAllows you to broadcast an emergency signal with own position information.

RFDS emergency call*The RFDS (Royal Flying Doctor Service) emergency call uses a 2-Tone signal for an emergency call. (* Australia version only)ALE soundingAutomatically sends a sounding signal at a certain interval (0.5–16 hours) to check the chan-nel propagation and stores the data in a table.

ALE individual/net callAutomatically selects the best available channel using the ALE table and establishes a connec-tion. The ALE system complies with the basic requirements of MIL-STD 188-141-B (Appendix A).

ALE AMD (Automatic Message Display)Allows you to send and receive up to a 90-character text message using the ALE function.Received messages are stored in the memory of the radio.*1 GPS position call, GPS beacon call, Pagecall and Status call use Icom original commands. These calls may not be compatible with other brands.*2 Please consult with a telephone interconnect service provider for details.

Versatile configurationThe controller and speaker are separated from the main (RF) unit for flexible installation.A 6m separation cable is attached to the controller. The main unit is only 72mm (2 27/32 in) height, so there is almost no limit to the places where the IC-F7000 can be set-up. The supplied hand microphone, HM-146, allows you to control most of the IC-F7000 functions.Large and clear indication with the dot-matrix LCDAll operational and status information is easily viewed on the full dot-matrix LCD. Editing a message or reading a received message are made easy. Also 10 levels of LCD backlight-ing are available for clear and bright illumination.125W of powerful RF outputA full 125W* of output power is available for reliable long distance communication. Aneffective cooling mechanism allows continuous transmission at full output power.* 100W only for Australia version and for 4MHz bands and above for General version.Ample memory channelsThe IC-F7000 stores 400 channels, 100 ALE channels, 100 telephone numbers, 100 Selcall IDs and 120 ALE IDs. 20 pagecall with up to 64-character messages and 20 ALE, including up to 90-character ALE AMD messages are stored.

General coverage receiverWide band, general coverage receive capability is available from 0.5 to 29.999MHz.

Automatic tuning antennaThe AT230 automatic tuning antenna is recommended for use with the IC-F7000. The AT230 fully covers 2–30MHz. It is also easily installed to a vehicle.

Digital Signal Processor (DSP)The DSP allows flexible filter setting for J2B (AFSK), F1B (FSK) communication. Optionalfilters are not required for improved filter performance.

Other features• GPS input (NMEA0183 version 3.01)• External 32MHz reference input for accurate tuning• Voice, S-meter and Call mute• Optional antenna tuner, AT-140 available with antenna element, AH-2b

South Midlands Communications Ltd. SM House, School Close, Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLANDTel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: sales@smc-comms.com

HF TRANSCEIVER IC-F8101AUTOMATIC TUNING ANTENNASAH-760 AH-740Wide frequency type Compact type

SPECIFICATIONSFrequency coverage Receive: 0.5–29.9999MHz,

Transmit: 1.6–29.9999MHz Type of emission J3E, A3E (RX only) (Australia versions)

J3E, A3E, A1A, F1B, J2B (Export/USA versions)

Number of channels 500 channelsNumber of addresses Selcall 500 channels, ALE 500 channels

Operating temperature –30°C to +60°C; –22°F to +140°FFrequency stability ±0.3ppm (at –30°C to +60°C)

Power supply requirement

13.8V DC Negative ground10.8–15.6V (Australia versions)

11.73–15.87V (Export/USA versions)Antenna impedance 50Ω (SO-239)

Current drain Receive - Less than 3A (Max. audio), 1.0A (Stand-by)

Transmit - Less than 28A (Maximum output)Dimensions (W×H×D)

(Projections not included)

174×62×259 mm; 6.85×2.44×10.2 in(Controller attached type)

Weight (approx.) 3.9kg; 8.6lb (Controller attached type)

Rock Solid Basics:ALE (Automatic Link Establishment)ALE is a system that automatically selects the most suitable channel and establishes a communication link. ALE provides interoperability with other 2G ALE manufactures compliant with the FED-STD-1045A ALE standard. ALE individual call, net call, sounding and AMD (Automatic message display) are available.Selcall (Selective Calling)The IC-F8101 provides CCIR493 based 4/6 digit open standards Selcalls, commonly used in HF network and calls based on the 4/6 digit scheme used in the Icom IC-F7000. Selcall types: selective calling, phone call, message call, position call, status call, emergency call and channel test call. Stun command remotely disables radio operation.

Compact and DurableThe IC-F8101 has a durable, enclosed structure securely sealed from intrusionby all potential elements, and is a visibly compact package. The IC-F8101 and the CFU-F8100 cooling fan unit has been tested to MIL-STD-810-G and IP54 ratings. Also,connection cables and connectors are IP54 water resistant.125W* of Powerful RF OutputA full 125W* output power at full duty cycle voice mode operation is possible with the fanless design. A 25% duty cycle operation is possible in the data mode (Maximum 5 minutes of continuous transmission). When used with the CFU-F8100 optional external cooling fan unit, the IC-F8101 ensures full duty cycle data and voice mode operations for absolute reliability during long continuous transmit cycles, or for operation in hot climates. * 100W for Australia versions.

BITE (Built-in Test Equipment) FunctionYou can check the transceiver’s condition by using the BITE capability. Auto, logic, receiver, and transmitter are selectable.

A Benchmark for Ease and Convenience:User Friendly OperationThe IC-F8101 is designed for simple, straight forward operation. The Administrator/User access feature limits the functions that can be accessed by the user. The Administrator can enter the operating frequency and assign memory channels from the front panel or the remote control microphone. The following functions can be assigned to the [I], [II], and [III] function buttons: Main menu, Manager menu, Set mode, Selcall address list, RX history, and TX history.Clear Talk FunctionThe clear talk function separates signals from noise using the DSP, and gives you clearer audio at the touch of a button.

Function button menus are shown at the bottom of the display

Mute FunctionsThe IC-F8101 has 3 types of mute functions: call squelch, S-meter squelch and voice squelch. The call squelch function opens the squelch only when receiving a Selcall or ALE call sent intentionally to this station, and provides quiet standby.

Digital Signal Processor (DSP)The latest DSP technology improves both the transmitter and receiver performance. The digital IF filter provides flexible filter settings for narrow band signals.

Three types of controller configurations: Three types of controller configurations are availableto suit almost any use or installation that may be required.

Controller attached typeIdeal for standard desktop use or quick set-up in a field station

Remote control microphone type*For even more convenient use of the radio, especially during mobile operation.

Detached controller type*Stow the RF unit in a convenient place for in-vehicle use or where space is at a premium.

* For the detached controller and remote control microphone types, an optional separation cable is required. (Purchase separately)

Your Professional HF Needs Catered to in One Complete Package

South Midlands Communications Ltd. SM House, School Close, Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLANDTel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: sales@smc-comms.com

AUTOMATIC TUNING ANTENNASAH-760 AH-740Wide frequency type Compact type Two types of high performance, automatic high-speed tuning antennas areavailable.

AH-760, Heavy-duty Moving Coil Antenna• 200W PEP SSB, 125W PEP CW/DATA• 1.6MHz–29.999MHz wide frequency coverage with the supplied whip antenna• 350mS high speed tuning (while memory tuning)• Tested to IP68 and MIL-STD-810G environmental standards

AH-740, Relay-Driven Compact Antenna• Relay-driven compact automatic tuning antenna• Compact and lightweight (3.5kg)• 150mS typical high speed tuning (while memory tuning)• Low power consumption (0.4A typical)

AH-5NV NVIS (Near Vertical Incidence Skywave) kitFiberglass antenna element (4.5m; 14.8ft) for short range communication within approximately 500km* (* Depending on radio propagation conditions)

NVIS Kit (Option for AH-760 and AH-740)

AH-5NV

SPECIFICATIONS AH-760 AH-740Frequency coverage

With 1.54m whip antennaWith AH-5NV

1.6–29.9999MHz1.6–16.0000MHz

2.5–29.9999MHz2.2–29.9999MHz

Output power rating SSB: 200W PEP*,CW/DATA: 125W PEP*

SSB/DATA: 125W PEP

VSWRWith 1.54m whip antenna

With AH-5NV1.3:1 typical (50Ω)1.5:1 typical (50Ω)

1.5:1 typical (50Ω)1.5:1 typical (50Ω)

Tuning speed New channel Memory tune

Less than 1.8 SLess than 350 mS

2–3 S typical150 mS typical

Number of memory channels 200 channels 45 channels Operating temperature –40°C to +70°C; –40°F to +158°F

Power supply requirement 13.8V DC (10.8–15.87V) Power consumption 1.87A typical (tuning) 0.4A typical

Tune power 5–15W PEP, Rated 10W PEP 5–15W PEP, Rated 10W PEPDimensions (W×H×D)

(Projections not included) Height (with whip + spring)

840×100×100 mm;33.07×3.94×3.94 in (Base unit)

2475 mm; 97.44 in

238×145×160 mm;9.37×5.71×6.3 in (Base unit)

1909 mm; 75.16 in Weight (approx.) 5.2kg; 11.5lb 3.5kg; 7.7lb

Mounting M16×45mm M16×45mmEnvironmental test MIL-STD-810-G MIL-STD-810-G

IP Rating IP 68 dust-tight and waterproof IP 55 dust-protection and water jet resistance

Supplied accessories 6m; 19.7ft control cable and 6m; 19.7ft coaxial cable AH-760 AH-740Above photos include mounting bases for photo shooting.* Maximum 6 minute continuous transmission at 35°C.

South Midlands Communications Ltd. SM House, School Close, Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLANDTel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: sales@smc-comms.com

HF TRANSCEIVER PACKAGESMOBILE PACKAGE BASE STATION

RADIO IC-78MOBILE ANTENNA

AUTOMATIC ANTENNA TUNERVEHICLE INSTALL KIT

Part No: SMCHF/MP1

RADIO IC-78POWER SUPPLY

MAST (PA2) 30mts COAX & PLUGS

ANTENNA (TFDBBE)

Part No: SMCHF/BP1

OPTION

1

OPTION

2

OPTION

3

MOBILE PACKAGE BASE STATIONRADIO IC-F7000

AT230 AUTO TUNING ANTENNAVEHICLE INSTALL KIT

Part No: SMCHF/MP2

RADIO IC-F7000POWER SUPPLY

MAST (PA2)30mts COAX & PLUGSANTENNA (TFDBBE)

Part No: SMCHF/BP2

MOBILE PACKAGE BASE STATIONRADIO IC-F8101

AH-760 AUTO TUNING ANTENNAVEHICLE INSTALL KIT

Part No: SMCHF/MP3

RADIO IC-F8101POWER SUPPLY

MAST (PA2)30mts COAX & PLUGSANTENNA (TFDBBE)

Part No: SMCHF/BP3

PA2 TFDBBE

South Midlands Communications Ltd. SM House, School Close, Chandlers Ford, Industrial Estate, Eastleigh, Hampshire, SO53 4BY ENGLANDTel: +44 (0)23 8024 6200 - Fax: +44 (0)23 8024 6206 - Email: sales@smc-comms.com