HANDY AUTO & HANDY AUTO PLUS

Handy Auto / Handy Auto Plus

Features

Automatic igniting/extinguishing system

Safety valves maintaining the preset flow-condition of pre-heat oxygen and fuel gas. No re-adjustment.

Cutting Versatility: Straight line, Circle, Shape cutting and Bevel cutting

Easy to handle, and Highly efficient performance

Machine automatically starts when cutting oxygen is turned on.

Driving wheel rotates full 360° All-direction cutting is possible. Wheels can be changed in a moment Step less speed regulator Constant cutting height

Outline of Ignition Unit

Ignition Nozzle

Control Lever for Gas flow and Ignition

Ignition Nozzle

Control Lever

Release Button

Adjusting procedure of igniting

Pull the lever inside first before initial adjustment of flame. Next

Ignite procedure

①

④

③ The fuel gas out of cutting nozzle will ignite.

④ Adjust the flame

① Pull the lever inside more, then pilot flame is made out of igniting nozzle

② Open the fuel gas and oxygen valve a little

②

③

④

Pre-heat oxygen valve

Fuel gas valve

④

⑤ Adjust each gas flow

④ Open the oxygen valve a little

⑥ Get qualified flame

Adjust the flame

Valve condition can be locked after adjusting each gas flow.

The fire goes out only with pushing

of the release button.

Release button

Push

Extinguish the flame

Re-ignitionby only the lever operation

Pull the lever inside

RE-ignite

Igniting ←→ Extinguishing

Pull the lever inside

Igniting Push the release button

Extinguishing

Small circle cutting① Setting a radius of circle

② Put on the plate

③ Igniting ④ Heating a piercing point

⑤ Cutting the circle

Specifications

Input power AC 110-240V Cutting thickness 5 ～ 30 mm Speed range 150 ～ 700 mm/min Wheel drive Friction drive Cutting tip Type 102 or 106 Weight 3.5kg

Handy Auto PLUS Kit

1) Main unit 12) Square cutting attachment 13) Auxiliary wheel for square cutting attachment 14) Beveling wheel 15) Small circle cutting attachment 16) Manual guide lever 17) Cutting tips, either type 102, or type 106; #0, #1, #2 1 each8) Spanner for changing tip 19) Fuse (1A) 110) Carrying case (steel) 1

Standard Attachment - 1

1. Auxiliary wheel for square cutting attachment

Standard Attachment - 2

2. Beveling wheel (22° ～ 45°)

Standard Attachment - 3

3. Small circle cutting attachment (φ30 ～ φ200mm)

Standard Attachment - 4

4. Manual guide lever

Optional Attachment - 1

1. Guide rail for straight line cutting

Optional Attachment - 2

2. Large circle cutting attachment (φ127 ～ 480mm)

Attachments can be changed in a moment

The Handy Auto Plus can be set up for any type of cutting in a moment.Changing between any of the versatile attachments is a one-hand operation.

Cutting Versatility

All types of cutting in any shape

possible1. Straight line cutting

2. Beveling

All types of cutting in any shape

possible3. Curved line cutting 4. Circular cutting

5. A curved steel plate

All types of cutting in any shape

possible6. “U” shape bar 7. Square pipe

8. H-shaped steel bar

All types of cutting in any shape

possible9. Pipe cutting

10. Slot cutting 11. vertical surface

Practical example