h10 proposal - takumi usatakumiusa.com/wp-content/uploads/2017/01/h10-proposal.pdf · h10 proposal...

Takumi USA | 7220 Winton Drive | Indianapolis, IN 46268 | 844.302.3792 | takumiusa.com P a g e | 1

Takumi H10 High Speed Double Column Machining Center

*-Shown here with optional equipment

Takumi H10 with Fanuc 31i-MB Control Standard Specifications X, Y, Z -Axis Travel 40.16" x 27.56" x 19.69"

Table Working Surface 41.3” x 27.6”

Maximum Table Load 1760 lbs.

Spindle Taper Big Plus® CAT 40

Spindle Speed 15,000 rpm

Spindle Motor Horsepower (30 min.) 24.8 HP

Spindle Motor Torque (Peak) 105.5 ft. lbs.

Number of ATC Stations 30

Rapid Feed/Cutting Feed 1259 IPM/787 IPM


Standard Machine Features

» Roller Type Linear Guides on All Three Axes » 15,000 RPM, CAT40 BIG PLUS, inline spindle » Hand-scraped contact areas » Fast 1,259 IPM Rapid Traverse Rates » 787 IPM Milling Feed Rate » 30 Station ATC – Random Access » Oil Skimmer » Work Light » 3-light indicator lamp » Coolant Thru Spindle, 435 PSI/8.45 GPM » Linear Scales on all axis’ » Manual Pulse Generator (MPG)

» Spindle Thermal Chiller » Coolant Wash down System » Programmable Cutting Air-blow » Wash-down gun and Air gun » Fanuc 31i-MB Control with 2 Years Parts and

Labor Warranty » AICC II w/600 Block Look Ahead » 1 GB Storage Data server » 2 Years Parts, 1 year Labor Warranty » Leveling bolts and pads » Operator Manuals

Starting at $171,995.00

At Takumi we implement stringent design and manufacturing practices to build rigid and reliable machining centers that will exceed your productivity expectations. From our meticulous manufacturing processes, such as hand scraping contact areas, to the use of premium components, we infuse quality into each of our products.

Since 1988 Takumi has been exceeding customers’ expectations, in Europe, Asia and North America. Acquired by Hurco Companies in 2015, we are ready to exceed your expectation with our nationwide comprehensive support network, based in Indianapolis, Indiana.

Like you, we believe machine reliability and proven control technology yields the greatest benefit to your business.

Takumi adapts the world’s leading CNC control to a rugged and durable machine to achieve higher productivity through speed, accuracy, and reliability


Takumi H10 High Speed Double Column Machining Center

*-Shown here with optional equipment


Double Column Design The Five Features That Matter

1

A Robust Machine Base

The one-piece casting absorbs the thrust forces of high rapids (1259 IPM) and fast cutting feeds (787 IPM) and provides a robust platform for stable machine geometries.

The solid one-piece design, with no weldments, provides excellent support for the column. The base width provides stability for large table loads and the increased weight absorbs the inertia of high rapids and fast cutting speeds. The numbers: 20,020 LBS Machine Weight,

1760 LBS Table Capacity, 1259 IPM Rapids 787 IPM Cutting Feedrate 19.99” Between Centers of Linear Rails 41.3” X 27.56” Table




Included chip handling and wash down systems are all contained within the base casting.


Double Column Design

The Five Features That Matter


The wide, single-axis base creates ample door openings and great ergonomics.



2

The Double Column

The double column – ALSO a one-piece design – provides increased rigidity enabling higher speeds and accuracy for a superior part finish in a very large work area.

H10 Double Column

Eliminates “Pitch” Deflection and Dampens Inertia

X Axis

The one-piece design provides increased weight to absorb cutting vibration, and increased rigidity. The dual contact areas with the base eliminates pitch in the Y axis and reduces the effect of machine leveling changes over time.

By design, the table traverses in a single axis under the column, reducing energy consumption and the overall footprint of the machine.

The cross rails – mounted in a “ladder” design – increases rigidity, and eliminates head deflection.

The Z axis geometry is maintained by the rigidity of the column and rail mounting.

The Y axis cross rail saddle carries a constant weight, allowing for faster cutting while maintaining great part finish.


Double Column Design

The Five Features That Matter

The Double column

H10 X Axis

The double column increases the available Y axis work area by 35%

The Y axis travels under the column, reducing the overall footprint of the machine.

The numbers: X Axis Travel – 40.16”

Y Axis Travel – 27.56”

Z Axis Travel –19.69”

Base Footprint – 107.48” X 107.48”

The ATC is mounted outside of the work area, with a door protecting the mechanisms of the tool changer, keeping tools and tool changer from chips and coolant.

The numbers:

Capacity – 30 Tools

Largest Diameter – 2.95” / 5.85” *

Maximum Tool Length – 11.81”

Maximum Tool Weight – 15.43 LBS *

5.85” with adjacent pockets empty (standard feature)



3

Thermal Stability

The low mass spindle head mounted to the solid base and column allows for the latest in material removal strategies, with speed, precision and thermal stability.

The ladder design of the rails minimizes the distance from spindle centerline to supporting structure providing a more rigid head. The reduction in casting material required by the in-line spindle motor reduces the total displacement potential of thermal growth. The spindle and spindle motor are temperature stabilized by use circulating fluid by an oil type chiller, isolating the main sources of head from the casting. Direct driven, in line spindle reduces vibration to achieve superior part finish.



Thermal Stability

Every spindle is tested for thermal growth in the machine at our factory. If test results fall outside our stringent specifications, the spindle is replaced, and testing is repeated.

Our spindles are specially constructed for minimal heat generation, for today’s high speed cutting practices.



Thermal Stability

The machine is equipped with multiple coolant-delivery solutions:

Coolant Thru Spindle at 435 PSI/8.45 GPM

Coolant Around The Spindle

Flexible Coolant Nozzles

Cutting Air Blow (Air Thru Spindle optional)

110 Gallon Coolant Tank



4

Rugged Axis Power Transmission and Accurate Motion Control

Superior accuracy and finish at high feed rates are achieved by the reduction of lost motion, precise alignment and excellent quality control.

Great attention to detail is the key to reliability, accuracy and repeatability. At Takumi, every component is hand fitted and aligned to achieve the best possible build. Hand scraping for alignment and fit is the oldest, and remains the best method for working with the types of iron used in machine tool construction. Over 35 components in the axis transmission and spindle assemblies are fitted using this process. Expertly crafted construction, backed by a 2 year parts warranty for peace of mind in your investment in the Takumi brand.




Ball TypeLinear Rail

Roller TypeLinear Rail

Contact Areas

The ballscrews are large diameter for strength, and fine pitch for accuracy.

45mm/1.77” Diameter

12mm/.472” Per Revolution

Roller type linear rails are used – versus ball type – for greater contact area, to support faster feeds, higher rigidity and higher weight bearing capability.




To eliminate lost motion, the ballscrews are anchored on both ends and pre-tensioned. The motors are directly coupled to the ballscrews.

Linear scales are standard on all 3 axis. Mounted to the table, cross rail and head they take a direct reading of the true position of the axis. This compensates for thermal

growth, mechanical flex and backlash, for improved accuracy and repeatability.




Accuracy = .00018”

X-Y Circularity = .00015”

All machines complete the build process and move on to testing and verification.

Laser compensation is applied and ball bar

certification is performed to verify the accuracy.



5

Advanced CNC Control Features

The processing power and smoothing features needed to reach maximum cutting speed and maintain superior part finish.

We work closely with FANUC to deliver the best features and options for the customer, with the 31i-MB Control.

Large memory for surfacing data programs, large look ahead for path planning and the ability to decide between roughing and finishing are all included in this powerful, industry leading control.

The standard Takumi control features are specifically designed to augment the mechanical design for greater speed and superior part finish.

Standard Features:

1 Gig Data Server

AICC 2

Nano Smoothing

High Speed Processing

600 Block Look Ahead

Machine Condition Selection (R1-R10)



Advanced CNC Control Features 1 Gig Data Server - The Data Server / Fast Data Server consists of an embedded memory card and an Ethernet connection on the CNC. The Data Server allows files to be transferred from a host computer to the CNC memory, or to the memory card on the Data server. Part programs may also be executed directly either from the network or the Compact Flash card on the Data Server. Benefits • Manage part programs for multiple machines at a central location. • Store and reliably execute large part programs without taking up part program storage on the CNC. AICC 2 - AI Contour Control II (AICC-II) is used to realize high-precision machining at optimal machining speeds. This function suppresses path errors due to acceleration / deceleration delay, servo positioning delay, and mechanical and electromechanical machine performance constraints. Without this function machining profile errors would increase proportionally with the programmed path feed rate. In practice, this function is useful when cutting on complex part forms involving sudden cutter direction changes such as are found in die/mold machining. Benefits • Optimization of the machining speeds using smooth acceleration / deceleration to minimize axis-overshoot errors. • Decrease of the part-form tolerances suppressing acceleration / deceleration delays and servo lag • Elimination of corner-clipping errors that typically increase as the feed rate increases • Less requirement to process later the cut surface with grinding or polishing • Significant increase of the machine productivity



Advanced CNC Control Features High Speed Processing - The High-Speed Processing function improves both the CNC Block Processing Time and the NC block look-ahead capability of the option AI Contour Control II. Benefits • Enables higher precision machining of complex free-form surfaces described by minute micro-block moves. • Optimization of the machining speed of complex free-form surfaces described by minute micro-block moves. 600 Block Look Ahead - When performing High-Speed Processing with AI Contour Control II, this function expands the CNC look-ahead capability to 600 CNC Part Program Blocks. Benefits • Enables a higher-precision machining on cutting complex part-forms that are defined by many, tiny, program blocks such as are found in die/mold machining. • The more look-ahead blocks the control can preview, the greater the chance it has of predicting a cutter direction change. Machine Condition Selection Function - Machining Condition Selection Function (MCSF) is a programmable way for the operator to set a level of machine accuracy whilst also optimizing productivity. With 10 defined steps, speed can be prioritized during roughing and then precision for the final finishing cuts. Benefits • Optimize the machining cycles • Better quality • Reduced machining time




The control and drives operate together with nanometer precision. Purposefully built for high speed applications, each machine is loaded with the complete package, and tuned individually at the factory for the best finish and speed.




After the control and drives are tuned by FANUC trained engineers, every machine cuts a complex test part. All the features of the part are inspected and the machine is further tuned until it passes this rigid test.


Machine Pricing

H10 40” X 27” X 19.69” Double Column Machining Center…………………………$171,995.00

Linear Scales X, Y, and Z Axis Included

15000 RPM Big Plus® CAT 40 Direct Drive Spindle Included

30 Station, Random Pocket Swing Arm ATC Included

435 PSI (30 BAR), 8 GPM Coolant-Thru Spindle Included

Programmable Cutting Air Blow System Included

110 Gallon Coolant Tank Included

Operator Air Gun Included

Operator Coolant Wash Down Gun Included

Oil Skimmer Included

Programmable Chip Wash Down Included

Full Chip Enclosure Included

Spindle Thermal Control Oil Chiller Included

Complete Machine Installation and Training Included

FANUC 31i-MB Control Included

Machine Info Standard Warranty: 24 months Machine Parts / 12 months labor warranty.

Delivery: F.O.B. Shipping Point. Shipment:____ weeks after receipt of order, subject to prior sale. Prices good for 30 days. Proposal

subject to error correction. Options and accessory prices listed are valid on new machine purchases only. Options and accessories purchased as field installation items may be subject to additional charges.

AICC II, 600 Block Look Ahead, Nano Smoothing, High Speed Processing, Machining Condition Selection Function, 1Gig Data Server, 3 Axis MPG, Jerk Control, Rigid Tapping, Helical interpolation, High Speed Skip, Custom Macro B, Additional Common Macro Variables, Programmable Mirror Image, Increment System C, Manual Guide i, USB Port, Compact Flash Port.

Control and Servo/Spindle Systems 2 Year Parts and Labor Warranty Provided By FANUC America.


Optional Accessories

Machine Options

20,000 RPM HSK A63 Integral Spindle

Dual winding, motorized spindle using HSK A63 tooling……………………………………………………………………………………$13,000

24,000 RPM HSK A63 IBAG Integral Spindle

High Speed, motorized spindle using HSK A63 tooling…………………………………………………………………………………….$38,000


Machine Accessories

FANUC 31i-MB Control Options

Lift-up Chip Conveyor

Steel belt style conveyor with programmable operation, left side discharge with included chip cart. Option comes with new coolant tank. Discharge height approximately 38”…………………………………………………………………………………………………………..$5,495

Oil mist Cutting Device

Programmable oil system providing your choice of cutting oil through the machine’s included cutting air lines to the spindle head. Electronically adjustable flow and controlled by machine m-code………………………………………………………………………...$795

BT Tool Holder Conversion

Replaces the ATC arm ends to accept BT or BBT (BT Big Plus®) tool holders…………………………………………………………$1,500

Cutting Air-Thru Spindle

Programmable air through the spindle/tool for dry cutting………………………………………………………………………………….$3,995

4th Axis Preparation

Interface cables and bulkhead connections for future axis expansion…………………………………………………………………….$2,000 Note: Not required for complete 4th Axis options in this quote.

Mist collectors

Mist Blaster® 700 CFM…………………………………………………………………………………………………………………………$3,195

Mist Blaster® 1200 CFM………………………………………………………………………………………………………………………..$4,495

High Pressure Coolant-Thru Spindle

Chip Blaster® D-30-70 Dual cartridge 10 micron filter, 8 GPM, 1000psi fixed rate system……………………………………………..$7,575

Coolant Filtration

Stand Alone Cyclone with pump……………………………………………………………………………………………………………….$4,579

All machine accessories are installed during installation at customer’s location and may extend the time required.

Additional 48 Work Offsets

Increase the retained work offsets (G54-G59) to include 48 more (G54.1 P1 - P48)”......................................................................$644

Tool Offset Pairs Change 99 to 400

Increase the tool offsets from the 99 standard pairs to 400 pairs……………………………………………………………………….. $429

Additional options available on request.


Renishaw Part Probes

Renishaw Tool Setting Probes

OMP40-2

Ultra-compact, kinematic 3D touch-trigger spindle probe with optical signal transmission, packaged with the OMI-2T optical receiver, CAT 40 or 50 tool shank and 100mm stylus. Used for workpiece set-up and inspection on small and medium machining centers. Inspection + software required.

40mm body, 3 axis sensing capability with 1.0 μm accuracy and repeatability. $5,940

OMP400

Ultra-compact, RENGAGE™ 3D touch-trigger spindle probe with optical signal transmission, packaged with the OMI-2T optical receiver, CAT 40 or 50 tool shank and 100mm stylus. It delivers unrivalled sub-micron performance when applied to complex 3D shapes and contours. Inspection + software required.

40mm body, 3 axis sensing capability with .25 μm accuracy and repeatability. $7,479

RMP60

Compact, kinematic 3D touch-trigger spindle probe with radio signal transmission, packaged with the RMI radio receiver, CAT 40 or 50 tool shank and 100mm stylus. Used for workpiece set-up and inspection for medium and large machines where line-of-sight between probe and interface is not always possible. Inspection + software required.

60m body, 3 axis sensing capability with 1.0 μm accuracy and repeatability. $7,685

RMP600

Compact, RENGAGE™ 3D touch-trigger spindle probe with radio signal transmission, packaged with the RMI radio receiver, CAT 40 or 50 tool shank and 100mm stylus. It delivers unrivalled sub-micron performance when applied to complex 3D shapes and contours in medium and large machines where line-of-sight between probe and interface is not always possible. Inspection + software required.

60m body, 3 axis sensing capability with .25 μm accuracy and repeatability. $9,220

OTS AA

Compact kinematic 3D touch-trigger tool setter with optical signal transmission packaged with the OMI-2T optical receiver. Used for broken tool detection and rapid measurement of tool length and diameter on a wide range of tools. M12 (1/2”) T bolt mounting (not supplied). Tool contact setting software required.

3 axis sensing capability with 1.0 μm accuracy and repeatability. $3,790

RTS AA

Compact kinematic 3D touch-trigger tool setter with radio signal transmission packaged with the RMI radio receiver. Used for broken tool detection and rapid measurement of tool length and diameter on a wide range of tools in applications where line-of sight between the tool setter and receiver is difficult to achieve. M12 (1/2”) T bolt mounting (not supplied). Tool contact setting software required.

3 axis sensing capability with 1.0 μm accuracy and repeatability. $4,610


Renishaw Part and Tool Probe Combination Packages

Renishaw Software

The FANUC Controls on all Takumi USA products contain all the neccesary options for probing as a standard feature.

OMP40-2/OTS Combo

Includes optical part probe, 100mm stylus, CAT 40 or 50 tool shank, optical tool setting probe, OMI-2T interface. Inspection+ software and tool contact setting software required. $8,710

OMP400-2/OTS Combo

Includes optical part probe, 100mm stylus, CAT 40 or 50 tool shank, optical tool setting probe, OMI-2T interface. Inspection+ software and tool contact setting software required. $10,245

RMP60/RTS Combo

Includes radio part probe, 100mm stylus, Cat 40 or 50 tool shank, radio tool setting probe, RMI interface. Inspection+ software and tool contact software required. $10,555

RMP600/RTS Combo

Includes radio part probe, 100mm stylus, Cat 40 or 50 tool shank, radio tool setting probe, RMI interface. Inspection+ software and tool contact software required. $12,295

NC4 Laser Tool Setter

Allows fast, non-contact tool setting and tool breakage detection on a variety of machining centers using small diameter tools. Precision optics enable the compact series to achieve unsurpassed performance in a unit particularly suited to small machines and machines where space is at a premium.

Measures tools .0012” to 3” in diameter with .000039” repeatability $5,430

Inspection +

Complete software package for creating and using all the programs needed for Renishaw part probe. Includes GoProbe cycles for use with the Renishaw smartphone app, enabling quick and easy learning for probing cycles. $1,345

Contact Tool Setting Software

Complete software package for creating and using all the programs needed for Renishaw OTS/RTS tool probes. Includes GoProbe cycles for use with the Renishaw smartphone app, enabling quick and easy learning for probing cycles. $540

Non-Contact Tool Setting Software

Complete software package for creating and using all the programs needed for the Renishaw NC4 laser tool probe. $810


Rotary Tables

Model Faceplate

Size Thru Bore

Size Gear

Ratio/Speed Brake Torque Angular

Accuracy Center Height Price Installation

GXA-170S 6.69"(170mm) 1.57"(40mm) 60:1 / 53 RPM 221lbf ft.(300Nm) 20 Arc

Seconds 5.31"(135mm) $19,800 Included

GXA-210S 8.26"(210mm) 2.55"(65mm) 72:1 / 53 RPM 295lbf ft.(400NM) 20 Arc


GXA-250S 10"(255mm) 2.55"(65mm) 72:1 / 53 RPM 295lbf ft.(400Nm) 20 Arc


GXA-300H 12.59"(320mm) 5.518(140mm) 120:1 / 22 RPM 1180lbf ft.(1600Nm) 15 Arc


Rotary Table Options

Detron GXA-S series tables are available with 6.69” (170mm) to 10” (255mm) diameter slotted face plates. These table have a patented dual pneumatic clamping system with high clamping torque capability, high precision cross roller bearings and a full gear depth transmission with a dual lead worm drive for low backlash. The motor enclosures are air purged for use in harsh environments.

A large 12.6” diameter slotted face plate model GXA-H is available with a 7.87” (180mm) bore, with hydraulic clamping for large applications and consolidated spindle with radial-axial bearing built in.

All rotary tables purchased through Takumi USA are complete packages including all necessary FANUC integration components and full installation from the vendor.

Manual Tailstocks

ST-170T for GXA-170…………………………………………………………………………………………….$1,150

ST-210T for GXA-210…………………………………………………………………………………………….$1,200

ST-255T for GXA-250…………………………………………………………………………………………….$1,200

ST-320T for GXA-320…………………………………………………………………………………………….$1,350

Chucks

SK-7 7” Diameter…………………………………………………………………………………………….$800

SK-9 9” Diameter…………………………………………………………………………………………….$1,150

SK12 12” Diameter…………………………………………………………………………………………...$2,250

All chucks include mounting hardware


H10 Dimensional Drawing


H10 Internal Clearance Dimensions


H10 Foundation Layout


Foundation Guidelines

1. FLATNESS ALLOWANCE OF THE FLOOR LEVEL SHOULD BE WITHIN ±10mm (0.39")

2. TAKE PRECAUTIONS SO THAT THERE ARE NO CRACKS IN THE CONCRETE.

3. IF AN EQUIVALENT ANCHOR BOLT IS USED, THE FOLLOWING CONDITIONS MUST BE MET:

a. CORE DRILLED HOLES MUST BE PREPARED TO ENSURE PROPER ADHESION OF GROUT TO THE FOUNDATION CONCRETE.

b. THE GROUT AND ANCHOR BOLT MANUFACTURERS' RECOMMENDATIONS MUST BE FOLLOWED TO ENSURE FULL STRENGTH OF THE FOUNDATION.

c. AFTER PROPER CURE TIME, ANCHOR BOLT MUST BE CAPABLE OF ALLOWING A MINIMUM TORQUE TRANSMISSION OF 542N-m (400 FT-LB.)

4. BASED ON THE SOIL CONDITIONS, THE STIFFNESS OF THE FOUNDATION SHALL BE DETERMINED, SO THAT THE MACHINE BASE DOES NOT DEFLECT MORE THAN 0.012mm (0.0005") INCHES TO MAINTAIN THE MACHINE ACCURACY AND PERFORMANCE

5. THIS DRAWING SHOWS THE GENERAL ARRANGEMENT REQUIRED FOR THE MACHINE FOUNDATION. LOCAL MASONRY CONTRACTOR AND/OR CIVIL ENGINEERS MUST BE CONSULTED FOR ADDITIONAL RECOMMENDATIONS, E.G. DEPTH, REINFORCING STEEL BASED ON THE LOAD BEARING CHARACTERISTICS OF THE SOIL, TO ACHIEVE SPECIFIED PERFORMANCE OF THE MACHINE.

6. FOUNDATION CONTRACTOR MUST PAINT FOUNDATION WITH A LIQUID PROOF PAINT PRIOR TO THE INSTALLATION OF THE MACHINE TO PREVENT THE FOUNDATION FROM ABSORBING MOISTURE.

FAILURE TO FOLLOW RECOMMENDED FOUNDATION GUIDELINES OR MANUFACTURERS' SPECIFICATIONS FOR ANCHORS MAY VOID GUARANTEES OF QUOTED MACHINE ACCURACY. IF PROPER ANCHORS HAVE NOT BEEN PROVIDED, THE MACHINE MAY NOT BE INSTALLED, UNLESS PRIOR ARRANGEMENTS HAVE BEEN MADE.


LIMITED WARRANTY Subject to the terms of this Limited Warranty, Hurco Companies, Inc. d/b/a Takumi USA (“Takumi USA”) warrants to the End User that exclusive of the Fanuc CNC Control, the Takumi Machine Tool, Replacement Part or Accessory, (each, a “Product”) for which this Limited Warranty is issued will be free from any Covered Defect during the Warranty Period for the Product.

During the Warranty Period, Takumi USA will replace or repair, at its option, a Product with a Covered Defect at no expense to its End User, except that: (1) End User must pay for any repair, replacement or installation costs not authorized in advance by Takumi USA; and (2) End User must pay for all shipping costs (including freight charges, taxes, and insurance), excepting shipping costs for repaired parts and components or a Replacement Part shipped under this Limited Warranty by Takumi USA to End User or an Authorized Distributor.

End User must report to Takumi USA in writing any Covered Defect as soon as practicable upon its discovery and in all events prior to the expiration of the Warranty Period for the Product. Takumi USA shall have no responsibility with respect to any Covered Defect which is not reported to Takumi USA by written notice prior to the expiration of the Warranty Period for the Product. End User must allow Takumi USA or an Authorized Distributor to inspect and test the Product during business hours to determine if there is a Covered Defect. At the option of Takumi USA, a Product with a Covered Defect will be repaired at End User’s location, and should not be returned to Takumi USA except upon inspection and testing by Takumi USA or, with prior approval of Takumi USA, an Authorized Distributor. Upon request, End User must return for repair or replacement, with shipping costs paid by End User, the Product or part(s) or component(s) of a Product with a Covered Defect to Takumi USA at the following address: Takumi USA, 7220 Winton Drive, Indianapolis, Indiana 46268. All parts, components and Products replaced by Takumi USA shall become the property of Takumi USA.

This Limited Warranty is effective and valid only if the Authorized Distributor from which the Product is purchased (or Takumi USA, if it is the seller) is paid in full for the Product, and the End User for that Product executes Takumi USA-provided installation acknowledgments and forms upon completion of installation of the Product.

The warranty covering the Fanuc CNC Control used with and made part of the Takumi Machine Tool is provided by Fanuc Corporation. Each of the Fanuc spindle motors and Fanuc servo motors, spindle and servo drives are covered by a two (2) year Fanuc manufacturer warranty (the “Fanuc Warranty”) running from the earlier of: (1) the date of the first use of the Takumi USA Machine Tool by its initial End User; and (2) the date which is 30 days after shipment by or for Takumi USA of the Takumi USA Machine Tool to an Authorized Distributor or the End User (the “Fanuc Warranty Period”). Takumi USA shall have no responsibility with respect to any defect in the Fanuc CNC Control occurring during or outside the Fanuc Warranty Period, but during the Fanuc Warranty Period, Takumi USA shall assist End User in reporting and processing a claim under the Fanuc Warranty, provided that End User reports any issue regarding the Fanuc CNC Control in accordance with the requirements for reporting a Covered Defect under the Takumi USA Limited Warranty. Fanuc will replace or repair, at its option, the Fanuc CNC Control at no expense to its End User, except those costs within the categories of costs to be borne by End User under this Takumi USA Limited Warranty.

As used in this Limited Warranty:

(a) “Accessory” means a new accessory, kit or optional equipment supplied and installed on a Takumi USA Machine Tool by Takumi USA or an Authorized Distributor at any time after the initial installation of that Takumi USA Machine Tool.

(b) “Authorized Distributor” means a Person authorized by Takumi USA to sell and service Takumi USA Machine Tools.

(c) “Covered Defect” means a failure of a Product during the Warranty Period to conform in any substantial way during normal use with the performance specifications and standards established by Takumi USA for that Product; provided that such failure is not caused by or resulting from any of the following: (i) normal wear and tear or deterioration; (ii) inadequate or improper maintenance, such as End User’s failure to clean, lubricate, replenish or replace oil, fluids, coolants, lamps, fuses, belts, filters and similar items; (ii) accident, negligence, theft, weather, electrical surges or lightning, fire or any other peril, misuse, abuse, programming error, improper operation or failure to follow fully maintenance and operation instructions provided by Takumi USA or a Takumi USA technical specialist to End User; (iv) mishandling, improper packaging or any other act which occurs during or in connection with shipment of the Product, or during or in connection with its rigging or installation, unless caused by Takumi USA or an Authorized Distributor; and (v) any repair, replacement, modification or alteration of the Product which is not authorized by Takumi USA.


(d) “End User” means the Person who purchases for its own use directly from Takumi USA or an Authorized Distributor the Product for which this Limited Warranty is issued, and, so long as any relocating and reinstallation of the Product is performed by an Authorized Distributor or Takumi USA, also any Person who purchases the Product from its initial End User prior to expiration of the Warranty Period for the Product. The term does not include any Person who purchases the Product for resale, lease or other transfer to, or use by, another Person.

(e) “Takumi USA Machine Tool” means a machine tool manufactured by or for Takumi USA, bearing the name “Takumi USA” and a “Takumi USA” trademark and serial number, and purchased by an End User new directly from Takumi USA or an Authorized Distributor, together with any accessory, component, kit or optional equipment installed on that Takumi USA Machine Tool by Takumi USA or an Authorized Distributor prior to or at the time of initial installation of that Takumi USA Machine Tool.

(f) “Person” means and includes an individual, partnership, joint venture, corporation, limited liability company, trust or other legal entity.

(g) “Replacement Part” means a new or rebuilt genuine part or component bearing a “Takumi USA” trademark provided by Takumi USA or an Authorized Distributor under this Limited Warranty in replacement of a part or component of a Product.

(h) “Warranty Period” means:

(i) For a Takumi USA Machine Tool, unless a different warranty period is expressly stated in the quotation issued by Takumi USA for that Product, a period of One (1) Year. These periods begin on the earlier of: (1) the date of the first use of the Takumi USA Machine Tool by its initial End User; and (2) the date which is 30 days after shipment by or for Takumi USA of the Takumi USA Machine Tool to an Authorized Distributor or the End User. (The warranty period may be extended, on exception basis, by a separate warranty extension issued in writing by Takumi USA to the End User for a Takumi USA Machine Tool);

(ii) for a Replacement Part, a period which is the longer of: (i) the 90 days after the date of its shipment by or for Takumi USA to an Authorized Distributor or the End User; and (ii) expiration of the Warranty Period for the Takumi USA Machine Tool on which that Replacement Part is installed; and

(iii) for an Accessory, a period which is the longer of: (i) the 90 days after the date of its shipment by or for Takumi USA to an Authorized Distributor or the End User; and (ii) expiration of the Warranty Period for the Takumi USA Machine Tool on which the Accessory is installed.

FOR ALL PRODUCTS AND THE FANUC CNC CONTROL TAKUMI USA DISCLAIMS ALL EXPRESS WARRANTIES, EXCEPTING ONLY THIS LIMITED WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF ANY KIND, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY AND ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.

END USER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY IS REPAIR OR REPLACEMENT, AT THE OPTION OF TAKUMI USA OR FANUC CORPORATION AS APPLICABLE, OF THE PRODUCT WITH A COVERED DEFECT OR FANUC CNC CONTROL.

IN NO EVENT SHALL TAKUMI USA BE LIABLE TO END USER OR ANY OTHER PERSON FOR DAMAGES, INCLUDING WITHOUT LIMITATION, LOST PROFITS, LOST WAGES, INOPERATIVE MACHINE OR SOFTWARE TIME, PARTS PROGRAMS, SCRAP PARTS, INFRINGEMENT, OR ANY OTHER INDIRECT INCIDENTAL, CONSEQUENTIAL, SPECIAL OR SIMILAR DAMAGES, OR FOR ANY DAMAGE OR INJURIES RESULTING FROM THE USE, OPERATION OR POSSESSION OF ANY PRODUCT OR THE FANUC CNC CONTROL OR ANY CLAIMS OR DEMANDS BROUGHT AGAINST END USER, HOWEVER CAUSED AND UNDER ANY THEORY OF LIABILITY, EVEN IF TAKUMI USA WAS ADVISED OF THE POSSIBILITY OF SUCH CLAIMS.

For questions regarding this Limited Warranty, please contact the Authorized Distributor or:

Takumi USA 7220 Winton Dr. Indianapolis, IN 46268 1-844-302-3792 [email protected]

h10 proposal - takumi usatakumiusa.com/wp-content/uploads/2017/01/h10-proposal.pdf · h10 proposal...

Documents