guillotine ideal 4205 - print finishing, paper handling...manual office guillotine with 430 mm...

SPECIFICATION SHEET | Manual Guillotine ≥IDEAL 4205 Cutting length 430 mm Cutting height 40 mm Narrow cut 34 mm Table depth 390 mm Measuring scale mm/inches CALIBRATED HAND CRANK The calibrated hand crank and the measuring tape on the side lay ensure the exact positioning of the backgauge. ≥ GUILLOTINE IDEAL 4205 MANUAL OFFICE GUILLOTINE WITH 430 MM CUTTING LENGTH (FOR FORMATS UP TO A3) ”SCS“ - the Safety Cutting System made by IDEAL provides numerous safety features: hinged, transparent safety guard on the front table (locks automatically while cutting); transparent hand guard on the rear table; safety catch (locks blade lever in upper position); safe and convenient blade change from the front without removing machine covers; blade changing device with covered cutting edge; blade depth adjustment from the outside of the machine; cutting stick can be turned or replaced easily from the outside of the machine | 430 mm cutting length | cuts up to 500 sheets of paper (70 g/m 2 ) or bound brochures up to 40 mm | high-quality blade made from ”Solingen steel“ | solid steel blade carrier | patented fast flick action clamp | side lay with measuring scale | spindle guided backgauge | fine adjustment of measurement with calibrated scale on the backgauge handle | solid all-metal construction | designed as table top machine, a stand is available as an option (at an extra cost) Dimensions (H x W x D): 400/1090 1 x 880 x 830 mm, Weight: 43 / 53 1 kg, Colour: pearl grey. 1 with stand The technical data are approximate. Subject to change. 03/2007 SAFETY GUarDS Transparent safety guards made from unbreakable Lexan ® on front and rear table: The hinged front safety guard locks in the lower position while cutting. BACKGAUGE AND SIDE LAY The accurate backgauge and side lays are made from cast aluminium and allow a precise alignment of the paper stack for exact cutting. FRONT SAFETY GUARD BLADE CHANGing DEVICE EASY CUTTING STICK CHANGE SAFETY CATCH FOR BLADE IDEAL 4205 with optional stand

Upload: others

Post on 08-May-2020

14 views

Category:

Documents

0 download

Report

Download

Embed Size (px):

TRANSCRIPT

SPECIFICATION SHEET | Manual Guillotine

≥IDEAL 4205

Cutting length 430 mm

Cutting height 40 mm

Narrow cut 34 mm

Table depth 390 mm

Measuring scale mm/inches

CALIBRATED HAND CRANK

The calibrated hand crank

and the measuring tape on

the side lay ensure the

exact positioning of the

backgauge.

≥GUILLOTINE IDEAL 4205MANUAL OFFICE GUILLOTINE WITH 430 MM CUTTING LENGTH (FOR FORMATS UP TO A3)”SCS“ - the Safety Cutting System made by IDEAL provides numerous safety features: hinged, transparent safetyguard on the front table (locks automatically while cutting); transparent hand guard on the rear table; safetycatch (locks blade lever in upper position); safe and convenient blade change from the front without removingmachine covers; blade changing device with covered cutting edge; blade depth adjustment from the outside ofthe machine; cutting stick can be turned or replaced easily from the outside of the machine | 430 mm cuttinglength | cuts up to 500 sheets of paper (70 g/m2) or bound brochures up to 40 mm | high-quality blade madefrom ”Solingen steel“ | solid steel blade carrier | patented fast flick action clamp | side lay with measuringscale | spindle guided backgauge | fine adjustment of measurement with calibrated scale on the backgaugehandle | solid all-metal construction | designed as table top machine, a stand is available as an option (at anextra cost)Dimensions (H x W x D): 400/10901 x 880 x 830 mm, Weight: 43 / 531 kg, Colour: pearl grey.

1 with stand

The technical data are approximate. Subject to change. 03/2007

SAFETY GUarDS

Transparent safety guards made

from unbreakable Lexan® on

front and rear table: The hinged

front safety guard locks in the

lower position while cutting.

BACKGAUGE AND SIDE LAY

The accurate backgauge and

side lays are made from cast

aluminium and allow a precise