GT2 Filter/Coalescer Panel • Robust construction for heavy Industrial Applications.

• Corrugated support mesh both sides of media.

• Washable & Reusable.

• Available in special sizes.

• Will operate in wet conditions.

• Operates at High velocities.

Construction:

The Seaworth GT2 Filter/Coalescer Panel is a washable product consist-ing of a durable synthetic media sandwiched between welded wire mesh. The structure is corrugated to increase surface area and retained in a 316 st/st channel frame for rigidity.

Applications:

The Seaworth GT2 Filter Coalescer Panel compliments the Seaworth 2 & 3 Stage Separator units, coalescing mist into moisture droplets. It oper-ates at high velocities of up to 6.0m/sec, considerably higher than con-ventional panel filters.

Cleaning:

The GT2 Panel can be cleaned with cold or warm water and detergent to restore original performance.

This data is guideline only and is subject to change. For further information please contact Camfil New Zealand Ltd

www.seaworth.com

Manufactured By: Camfil New Zealand Ltd

PO Box 531, Albert Street Cambridge, New Zealand

NZCB-Sales@camfil.com PH: +64 7 827 4142

Performance

ASHRAE 85% 52.1-1992 Arrestance

AS1132 85% No.4 Dust Efficiency

EN779 G3

Physical Sizes and Air Volumes

Standard Size Airflow Pressure m³/hr Loss (Pa)

592 x 592 x 22mm 3200 82 4500 134 5000 155

592 x 287 x 22mm 1600 85 2250 139 2500 161

490 x 490 x 22mm 2300 88 3000 128 3600 167

Special Sizes made to order