getac e100

4
Getac E100 GSM 3G setup 1) Remove the battery cover and battery as shown below. 2) Remove the two screws from the battery to remove.

Upload: spirit-data-capture-limited

Post on 28-Mar-2016

277 views

Category:

Documents


1 download

DESCRIPTION

Getac E100 manual

TRANSCRIPT

Page 1: Getac E100

Getac E100 GSM 3G setup

1) Remove the battery cover and battery as shown below.

2) Remove the two screws from the battery to remove.

Page 2: Getac E100

3) Insert SIM card into SIM Slot and reverse the process to re-attach battery and cover.

4) Power up the Getac.

5) Launch ‘OneClick Internet from the desktop icon.

6) Click ‘Settings’ to allow you to select the correct service provider.

Page 3: Getac E100

Select from pre-configured

service providers.

If your service provider isn’t on

the list then click here to

manually add the settings.

Click firmware, and then select

the service provider from the

list. Or select Automatic.

Page 4: Getac E100

Click ‘Connect’ to establish the

connection.