get 8va edicion

Download Get 8va Edicion

Post on 26-Oct-2015

406 views

Category:

Documents

31 download

Embed Size (px)

TRANSCRIPT

  • Cat Ground Engaging Tools

    Parts Sales Kit

    PECP3001-07 www.cat.com Printed in USA 2005 Caterpillar All Rights Reserved

    CatGround Engaging Tools Parts Sales Kit

    8th Edition

    Caterpillar. The difference counts.

    CAT, CATERPILLAR, their respective logos and "Caterpillar Yellow," as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

    8th Edition

  • 1Cat Ground Engaging Tools

    Ground Engaging ToolsSection

    No.

    Wear Protection 1

    Bulldozers / Compactors 2

    Excavators 3

    5000 Series Shovels 4

    Hydraulic Hammers / Demolition Tools / Rock Drill Tools 5

    Loaders / Backhoe Loaders / Integrated Toolcarriers 6

    Skid Steer Loader 7

    Underground Mining 8

    Paving Products 9

    Motor Graders 10

    Rippers / Scarifiers 11

    Scrapers 12

    GET Service Tools 13

    GET Made As Ordered Program 14

    Appendix / Reference Materials 15

    For updates to this book, please visit our website on Infocast: https://nacd.cat.com/infocast/frames/prodsupp/get/

  • 2Introduction

    This Ground Engaging Tools Parts Sales Kit (GET) is designed to providedealer salespeople (field and instore) with part numbers and product infor-mation as well as features and benefits for selected parts and service prod-ucts. It is a quick reference tool which lists part numbers and applicationsfor items that are: new, competitive and high in sales volume and salespotential.

    The GET PSK should not be used as a substitute for Parts Books,Numerical Parts Record, Parts Pricing Medium or any other formalreference publication. All part numbers, specifications and applicationdata published in the GET PSK are subject to change without notice. Anyinformation taken from this publication for use in preparing a PartsSales Order or Price Quotation should always be verified against theNumerical Parts Record in accordance with the Management Partsgramentitled The Numerical Parts Record.

    The tab index enables users to quickly locate various sections in the GETPSK. Users are urged to use the GET PSK consistently to help ensure closefamiliarity with the vast amount of part numbers and product information.

    Ground Engaging Tools

    This book supports the Caterpillar Ground Engaging Tools for loader buck-ets, excavator buckets, rippers, bulldozer blades and scraper bowls on eithercompetitive or Caterpillar machines. The function of the program is toincrease customer satisfaction and GET component sales by making avail-able a consistent, high-quality GET product line for all machines.

    The Ground Engaging Tools PSK should be useful in various depart-ments, for example:

    Parts and Service Salespeople can use it to determine convertibility andestablish a quote.

    The service/welding shop will also find many uses for this guide.

    Used equipment salesperson can convert machines on the lot toCaterpillar GET, increasing their value.

    NOTE: For a detailed list of serial number equivalent information, see SerialNumber Index, Form No. SEBF9451. This Equivalent Serial NumberGuide covers Caterpillar machines from 1955.

  • 1-1

    Wear Protection Section ContentsPage

    Weld-On Half-Arrow Edges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2Weld-On Heel Shrouds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-2White Iron Wear Block . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-3Mechanically Attached Wear Plate System (MAWPS) . . . . . . . . . . . . . . . . . . . . .1-4MAWPS Remove and Install Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-7Wear Bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-8

    Wear Protection

  • WELD-ON HALF-ARROW EDGES / WELD-ON HEEL SHROUDS

    1-2

    Wear Protection

    WELD-ON HALF-ARROW EDGES

    Weld-on half-arrow edges protect the bucket structure by adding more wearmaterial to the base edge, and they will fit other brand buckets.

    The weld-on half-arrow edges can be used to customize loader buckets. Forexample, they could be used as sidecutters on bucket side bars to improve pene-tration, or welded between bucket teeth to reduce scalloping. Before weldinghalf-arrow sections between bucket teeth, be sure to check for tip and pin holeclearance. This is a concern primarily when using bottom strap adapters.

    Options W T H B Overall Length

    Part No. in. mm in. mm in. mm in. mm feet mm134-1774 4 101 0.43 11 0.40 10 0.14 3.5 8 2438134-1776 6 151 0.63 16 0.60 16 0.22 5.5 8 24388J-8141 8 203 0.75 19 0.50 13 0.16 4.0 12 36588J-8176 10 254 1.10 28 1.10 29 0.44 11 12 36586Y-2107 10 254 1.60 40 1.20 30 1.00 25 12 3658109-2696 10 254 1.60 40 1.20 30 1.00 25 18 5486132-1013 11.6 295 1.77 45 1.34 34 0.47 12 3.3 1000

    WELD-ON HEEL SHROUDS

    Weld-on heel shrouds protect the lower outside corner of all types of Caterpillarand other brand buckets. Protection is given to the bottom and the side of thebucket with extra wear material concentrated in the corner where its needed most.Straight and curved heel shrouds are available in two different sizes to best matchbucket contour and size, and abrasiveness of the application. The inside corner isrelieved to eliminate interference with the bucket structure. Shrouds need not beplaced tightly together. They can be spaced apart and still provide full protectiondue to shadowing. Weld-on heel shrouds are especially applicable for LHEX andunderground LHD buckets.

    For high wear applications Caterpillars Mechanically Attached Wear Plate System(MAWPS) should be considered due to their quick change design. However, formoderate wear applications and sites especially concerned about mechanicallyfastened parts these weld-on heel shrouds are an excellent option to consider.

    Weight A B C D E F G H Rlb in in in in in in in in in

    Part No. Type (kg) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)157-1019 straight 68.4 9.8 7.9 10.6 2.0 1.8 1.2 7.9

    (31.0) (250) (200) (270) (50) (45) (30) (200)157-1027 curved 63.1 9.8 7.9 7.6 10.6 2.0 1.8 1.2 7.9 31.5

    (28.6) (250) (200) (193) (270) (50) (45) (30) (200) (800)138-6529 straight 30.4 6.9 5.9 8.1 1.6 1.4 1.0 5.9

    (13.8) (175) (150) (205) (40) (35) (25) (150)138-6551 curved 29.5 6.9 5.9 5.4 8.1 1.6 1.4 1.0 5.9 23.6

    (13.4) (175) (150) (136) (205) (40) (35) (25) (150) (600)

    W

    TH

    B

    A

    B

    A

    C

    R

  • 1-3

    WHITE IRON WEAR BLOCKWear Protection

    WHITE IRON WEAR BLOCK

    The high chrome alloy white iron is brazed to a mild steel backing plate whichcan be plug-welded with an E7018 3/32" (or similar) stick electrode to a bucket,dozer moldboard, or anywhere quick installation, low cost, abrasion protectionis desired. As with any welding, traditional preheating practices apply, depend-ing upon the location. In addition to quick installation, another advantage of thedesign is that the plug welds and steel base are protected from wear.

    This product is designed to add long wear life in highly abrasive applications. Ithas a hardness rating of Rc 60-65 and offers lower cost protection than hard-facing. In addition to its ease of application, it is environmentally neutral,unlike some other wear protection products.

    Part Numbers: 137-9699 137-9698 137-9697

    Sizes: (inches) 4 x 8 x 1 4.6 x 4.6 x .54 4.6 x 2 x .54(mm) 102 x 205 x 25 117 x 117 x 14 117 x 51 x 14

    Weights: (lbs) 7.19 2.79 1.14(kg) 3.27 1.27 0.52

    Features: quick installation versatility low cost environmentally neutral hardness Rc 60-65 protected welds and steel base

    Applications: Anywhere extra protection is needed for abrasive wear.May not be suitable for higher impact job sites.

    137-96994" x 8" x 1"

    (102 mm x 205 mm x 25 mm)

    137-96984.6" x 4.6" x .54"

    (117 mm x 117 mm x 14 mm)137-9697

    4.6" x 2" x .54"(117 mm x 51 mm x 14 mm)

  • MECHANICALLY ATTACHED WEAR PLATE SYSTEM

    1-4

    Wear Protection

    MECHANICALLY ATTACHED WEAR PLATE SYSTEM (MAWPS)The Mechanically Attached Wear Plate System provides a hammerless means of instal-lation and removal. They are capable of protecting wear areas previously unprotectedor protected by weld-on or bolt-on wear plates in a large variety of applications on Catand competitive machines. The Skeletal MAWPS uses the same Series 20 base andretainer as the regular MAWPS, but has a modified skeletal plate that fits on the base.The Skeletal MAWPS wear plate is skeletal in form so it traps material in the plate andbetween the plates.

    Features and Benefits Mechanical, hammerless installation. The Mechanically Attached Wear Plate

    System consists of a through-hardened DH-2 wear plate which slides onto a weld-onbase plate and is held in place with a patented compression retainer. The SkeletalMAWPS wear plate is skeletal in form so it traps material in the plate and betweenthe plates. With both MAWPS systems, worn wear plates can be quickly replacedusing a common prybar or a MAWPS removal tool, 160-5119, without hammeringor welding. This makes removal and installation quick and easy. Worn wear platescan be quickly replaced using a common prybar without hammering or welding,making removal and installation quick and easy.

    Reduced downtime and maintenance. Because the wear plates can be changedquickly, usually in two minutes or less, downtime and maintenance time are reducedcompared to weld-on or bolt-o