Gas measurement technologyPipeline inspection Note

General defect G 465 G 614Plan fault AI Leakage class

Overbuilding AII L1

Overgrowth B L2

Fitting fault C L3

Signposting fault Defects class

Ground subsidence K1

Corrosion K2

Pipe fixing K3

Miscellaneous

• Saving the route and gas readings• Recording points of interest (defects, faults and damage)• Photos of POIs• Classification of defects and damage• Can be used with ELLI, HUNTER and GOLIATH

The software enables easy and low-cost documentation of work when carrying out inspections on gas pipelines. In contrast to GIS solutions, which require a high-quality PC and involve the time-consuming import of pipeline data, Pi Note is a GPS datalogger for Android terminal devices, that enables easy logging of damage, defects and photos. Continuous recording of gas concentrations is possible via a Bluetooth data connection to the Esders measurement devices ELLI, GOLIATH and HUNTER. Positions where a specified alarm threshold was exceeded are recorded and registered separately. The route and the positions of data recordings and alarm thresholds being exceeded are marked in a map.

The easiest solution for documenting the inspection of gas pipeline networks with Android app and PC software:

www.esders.com

The recorded data can be turned into a report in PDF format with minimal work. For this, the inspection data is marked in the overview list and transferred to the PC via e-mail. The measurement file in the attachment can be read in via drag and drop and all relevant data is available to view on the PC in a clear format.

The data can be exported in CSV format to enable customers to carry out further evaluations flexibly according to their own requirements. This means that the trail of the inspection or the position of damage locations can be imported easily in the existing GIS systems

Esders Pi-Note

Quick overview of the inspected routes

Display of the locations of increased gas concentration Two different limit values can be entered for this. Positions where the limit values have been exceeded are marked in the plan with a yellow or red warning triangle.

Display of points of interest (POI) The recorded photos and data can be called up with a mouse click

Subject to technical modifications! Status 07/2016

Hammer-Tannen-Str. 26 • D–49740 Haselünne • Phone: +49(0)5961/9565-0 • Fax: +49(0)5961/9565-15 • www.esders.com