fs470 brochure - steel fire protection saudi arabia, steel fire protection usa, steel fire...
DESCRIPTION
Install FS23A Acoustic Intumescent Sealant to Provide Up to 4 Hours Fire Protection. Fire Security Systems experts provide Fire Stop Services, Fire Stopping, Fire Coating, Fireproofing Spray, Firestop Compound, Fireproofing, Steel Fire Protection, Cable Coating, Intumescent Coatings and Fire Protection Products worldwide like Middle East, USA, Canada, Africa, Bahrain, Saudi Arabia, Turkmenistan, Malaysia, Indonesia, UAETRANSCRIPT
FIRE SECURITY SYSTEMS
Steel Fire ProtectionFS470
Exc
elle
nce
in F
ire
Tech
nolo
gy
Water based thin-film intumescent coating optimised for 120 minutes fire resistance to structural steelwork
DESCRIPTION
FS470 is a water-based intumescent coating for interior structural steel. Unlike ordinary fireproofing, FS470 is applied at minimum thickness and requires no reinforcement. With its incredibly THIN Dry Film Thickness it represents a breakthrough in interior fire protection, design and technology.
FS470 is spray applied and offers up to 120 minutes fire protection under BS476: Part 21
FS470 is solvent free and virtually odourless. It has been designed to allow fireproofing without compromising aesthetic appeal.
FS470 protects open and closed steel sections against loss of bearing capicity for up to 120 minutes. This product has got the confirmation as an environmentally friendly building material according to LEED require-ments.
WHERE TO USE FS470
FS470 can be applied in residential, commer-cial and industrial applications where archi-tectural designs call for a thin-film, aesthetic, highly decorative finish.
WHY USE FS470?
FS470 give you Fire Protection with Aesthetic Appeal
FS470 has been designed to allow fireproof-ing without compromising aesthetic appeal:- Competitive dry film thicknesses,- Applied as a thin layer that does not com-promise intricate designs and shapes created from the structural steel,- Easy over coating with a wide range of coloured (RAL) finishes,- 2 hour Fire Protection for interior applica-tions,- LEED approved for enviromentally friendly construction.
Provides intumescent fire protection to structural steelwork while maintaining architectural aesthetics for commercial infra-structure assets including:
- Airports- Stadiums and Leisure Facilities- Office Buildings- Retail Complexes- Cinemas- Residential low and Highrise Apartments- Atriums
Provides intumescent fire protection t
TYPICAL APPLICATIONS
Primer
FS470
Topcoat
STANDARD APPLICATION
THE WINNING ADVANTAGE
- Recognized as the Lowest DFT on the market- Classified for up to 2 hours to BS476: Part 21.- 2 hour DFT starting at 0.912mm (beam).- Water based: solvent and asbestos free.- Lightweight, thin-film application.- Maintains contour of substrate.- Architectural, decorative finish. - Single component (stir and spray).- Cost effective due to low film thicknesses.- LEED Approved
REQUIRED DATA
Product Fire Rating (minutes) FS460 30 / 60FS470 90 / 120Approvals BS476: Part 21LEED Approved
Transport / Storage - Transport and store free from frost- preferably at a minimum of +5oC to a maximum of +30oC.- shelf-life of unopened pails: 12 month from date of manu-facture.- Opened pails must be re-sealed.
Packaging - 25 kg net weight (19 Litres or 5 Gallons)- Plastic pails- Other sizes on request
Surface Preparation Please refer to the Technical Data Sheet
Application Please refer to the Technical Data Sheet
Drying Time Please refer to the Technical Data Sheet
Top Coats Please refer to the Technical Data Sheet
Safety and the Environment Please refer to the Technical Data Sheet
FIRE SECURITY SYSTEMSNorway :
Skibåsen 20b -4636 Kristiansand NorwayTel:+ 47 95 47 80 00 Fax: +47 38 02 15 31
Canada:PO Box 21096, Coquitlam BC V3E 3P9 Canada
Tel:+1 604 941 1001 Fax: +1 604 648 [email protected]
www.Fire-Security.net
Disclaimer: The above data, particularly the recommendations for the application and use of Fire Security products are based on the manufacturer's knowledge and experience. Due to different materials and conditions of application, which are beyond our control, we recommend in any case to carry out sufficient tests in order to ensure that Fire Security products are suitable for the intended purpose and applications. Therefore, any liability for such recommendations or any oral advice is expressly excluded unless we have acted willfully or by gross negligence. It is always the responsibility of the installer / purchaser to guarantee correct preparation, DFT (Fire Security Coatings) and thickness (Fire Security Firestop Products) of all Fire Security products. Fire Security Systems is not liable for installation or faulty installation. It is always the responsibility of the installer / purchaser to guarantee and certify the installation of materials.
UAE :PO Box 40068
Ajman - United Arab EmiratesTel: +971 6 7478842 Fax: +971 6 7478843