TM

August 2013

TM 2

• Introduction

• Portfolio

− System Power Management

SBC

PMIC

− Power Analog Switches

High Side Switches

Low Voltage Motor Control

− System Management & Automation

Small Engine

Configurable I/O

− Battery & Energy Management

− Millimeter Wave Radar

• Summary

3 TM

>50 Year Legacy

>5,500 Engineers

>6,100 Patent Families

A Global Leader in

Microcontrollers

Digital Networking

Automotive MCU

Analog & Sensors

RF

Five Core Product

Groups

Four Primary

Markets

Automotive

Networking

Industrial

Consumer

4 TM

Automotive

• SBC power management & functional safety

• System management for powertrain, braking,

airbag, radar, battery, & small engines

• Power drivers & actuators

• Infotainment power management

• Crash sensor & stability control accelerometers

• Pressure sensor for TPMS & engines

• eCompass & orientation detection

• Digital Still Camera (sensors & motor control)

• Intuitive human interface

• Personal fitness

• eReaders & embedded computers

• Control, HMI, motor drive & functional safety

systems for factory automation

• Lighting, climate control, metering, security for

building automation

• Consumer, diagnostic, therapeutic for medical

• Kiosk, power tools, & transportation

Industrial

Consumer

5 TM

• SBC power management products with integrated safety features

• eSwitch solid state relays w/diagnostics and integrated redundancy

• MSDI (multi-switch detect interface) for safe contact detection and extended switch reliability

• IDC – Intelligent DC motor control w/ low side drives, high side switches, HV switch inputs, safety sensing inputs, diagnostics

• Radar – MR2001 transceiver chipset for encroachment detection (light curtains) and security monitoring (cameras)

Automotive ISO 26262

Industrial IEC 61508

Safety

Support

Safety

Process

Safety

Software

Safety

Hardware

Functional Safety Standards

Freescale Quality Foundation

As industrial automation transitions from mechanical to electronic safety

systems, demand for integrated functional safety will increase

6 TM

• Power Management for Processor products MC34903 – MC34904 MC34907 – MC34908 MC13892 – MMPF0100 – MMPF0200 MC34913

• eXtreme Switches for solid state relays and low frequency, high current PWM variable drives products MC06XSD200 – MC10XSD200 – MC16XSD200 MC07XSF517 – MC17XSF500 MC34981

• >24V Motor Drives products MC34931 – MC34932 MC34937 MM912_634

• BMS for industrial UPS batteries, ESS, Cordless Power tools, Small appliances MM912_637 – MM9Z1_638

• 77GHz Packaged Radar Multi-Chipset solution (RX, TX and VCO)

MR2001

7 TM

System Power

Management

Embedded System Power Management (PF0100/0200)

System Basis Chips (SBC): power mgmt + comm + safety

CAN bus and LIN connectivity transceivers

Battery & Energy

Management

Battery Monitoring System (BMS): 12V Pb, 14V Li-ion, 24V+

Alternator Regulator Chip

Stop/Start MOSFETs

Li-Ion Linear Battery Charger

System

Management &

Automation

Engine Management

Braking: ABS, ESC, WSS control

Airbag: power mgmt + comm + safety, squib drivers

Millimeter Wave Radar: 77GHz transmit & receive

DSI sensor Interfaces

Power Drivers

High & low voltage H-Bridge drivers

Low side drivers

Programmable solenoid controllers

H-Bridge and 3-phase motor pre-drivers

Intelligent Distributed Controllers (IDC)

Power Analog

Switches

18V & 36V/24A eXtreme Switches: High side FET w/ smart control

Multi-Switch Detect Interface (MSDI)

Mini/Micro Hi-Speed USB2.0 Switch Interface

8 TM

Power Management with Functional Safety Mechanisms

System Power

Management

Battery & Energy

Management

System

Management &

Automation

Power Drivers

Power Analog

Switches

9 TM

• Power Line Communication

• Elevators, Escalators

• Access control

• Security camera mounting

Building, Home Control

• Tablets

• eReaders

• Smartbooks

• Navigation

• IPTV

• IP Phone

• Infusion Pump

• Continuous Positive Airway

Pressure

• Ventilator

• Programmable Logic Controller

• Single Board Computer

• HMI

• Low end robotics

Consumer Medical electronics

Factory Automation

10 TM

SBC

Eco-system

System

Management

Power

Management

Physical

Layer

System Basis Chip (SBC) composition

• Complete eco-system

− Simplify customer usage (SPI, Thermal, ...)

− EMC compliance reports

• System Management

− Energy Savings : Manage Low Power Modes

− Functional Safety : Failsafe redundancy /

monitoring

• Power Management (LDO-DC/DC)

− Supply MCU, CAN and other loads

• Physical Layer (CAN/LIN)

− Transmit Digital Network Information robustly

11 TM

• Differentiating Points − Scalable and flexible LDO power supply with thermal boost,

ideal for Freescale’s 16 and low end 32-bit MCUs

− Innovative low voltage operation down to 4.0V input voltage

− Best In Class Low Power Modes (down to 15µA)

− Built-in safety features for MCU verification and external IC activation in fail mode

− On-board sensing of critical analog signals (Vbat, Ivdd, Temp)

• Product Features − Family of 14 products, pin-to-pin compatible, offered in both

5V and 3.3V Vdd options (Part number selectable)

− Bundles with Kinetis K, Low end Qorivva MPC56xx, and MCUs with < 2.5W (5V, 0.5A)

− 5.5V – 28V supply, with extended DC Low Voltage down to 4.0V

− 5/3.3V Vdd (150mA + opt. 300mA), and Vaux (ext. PNP), 5V Vcan

− Robust CAN HS Physical Layer (optional LIN – up to 2)

− Safety Features SAFE pin to drive external ICs in MCU fail mode

Secured critical changes of state machine w/ programmable fail safe state

Advance watchdog mechanisms & secured SPI (parity checks, 8clk count)

− SOIC32eP Package

Typical Applications

− Body Applications (Auto)

− Low end Power Train & Safety (Auto)

− Motor control Safety Critical (Indus)

− Robotics (Indus)

− Factory Automation (Indus)

Flexible, scalable 0.4A/4-28V SBC with multiple LDO regulators featuring low

15µA quiescent current, CAN High Speed transceiver and safety features

12 TM

• Fast Evaluation of SBC performance − Generic Family Evaluation Platform kit − KIT33905D5EKEVBE: MC33905D 5V EVB − KIT33905BD3EVBE: MC33905D 3.3V EVB Friendly Graphical Interface Covering 33903, 904, 905S, 905D versions

− KIT33903BD5EVBE: MC33903D 5V EVB − KIT33903BD3EVBE: MC33903D 3.3V EVB Friendly Graphical Interface Covering 33903P, 903S, 903D versions

− Working with USB to SPI: KITUSBSPIDGLEVME

• Complete Technical Documentation to ease Design

− Datasheets, Application notes, EVB contents (www.freescale.com) − Official reports from external laboratories

• Easy to Use tools

− Thermal prediction & Iq calculator tools (contacts your Sales or FAE representative) − Technical Training and hands on training on demand − FAQ and other technical marketing presentations

13 TM

MCU 8-bit 8-bit 16-bit 16-bit 16-bit 32-bit 32-bit 32-bit

SO8DZ

SO8DV

SO8DZ

SO8DV

S08DN

SO8EL

SO8SL

S12XE

S12XS

S12P

S12XS

S12P

S12XE

S12XS

S12P

MPC563xM

MPC560xP

MPC560xB

MPC560xC

MPC563xM

MPC560xP

MPC560xB

MPC560xC

Physical

Layer CAN LIN CAN LIN

CAN &

LIN CAN LIN

CAN &

LIN

Vmcu 5.0V/3.3V

100mA

5.0V

110mA

5.0V/3.3V

150mA

5.0V

110mA

5.0V/3.3V

150mA

5.0V/3.3V

150mA -

5.0V/3.3V

150mA

Power Sharing - - +300mA - +300mA +300mA - +300mA

Attach SBC

with Pin to Pin

compatibility

SOIC32eP

SOIC54eP

33903 - 33904 - 33905S

33905D 33904 -

33905S

33905D

Attach SBC

with Pin to Pin

compatibility

SOIC32eP

- - 33903P - 33903S

33903D 33903P -

33903S

33903D

Attach SBC

with Pin to Pin

compatibility

LQPF32

-

33910

33911*

33912*

-

33910

33911*

33912*

- - - -

*including motor control

for Window Lift

*including motor control

for Window Lift

14 TM

• Differentiating Points

− Ultra low voltage operation down to 2.7V supply with the efficiency of a standard DC/DC converter

− Innovative architecture allowing independent monitoring of safety critical parameters

− Scalable family of products supporting a wide range of MCU and power segmentation architectures

• Product Features

− Bundles with QorIQ (P1010) and MCUs < 4W

− Flexible DC/DC Buck pre regulator with optional Boost to fit with Low Voltage requirements

− Multiple supplies up to 1.5 A

− Low Power Modes (25µA)

− Analog Multiplexer & Battery sensing

− Independent fail safe state machine supporting functional safety standards

− Secure SPI interface

− Robust physical layer with superior EMI/ESD performance

Typical Applications

• Power management

• Functional safety integration

• Safety Critical Motor Control

System Basis Chip (SBC) family providing energy efficient DC/DC power conversion and low voltage operation with advanced functional safety mechanisms

Voltage Supervisor

Vaux 3.3 / 5.0V

VI/O - 3.3 / 5.0V

Vcore 2.4MHz

1.2 - 3.3V configurable Boost Driver

Vpre

440kHz Buck

Battery sense

Configurable

I/Os (6)

Fail Safe

Inputs

SecuredSPI

INT

Analog Multiplexer

Energy

Management

State Machine

Fail Safe Output

Static&Dynamic

Vcan - 5.0V

RST Fail Safe

State

Machine

CAN

Physical Layer Fail Safe Inputs

MCU

Challenger Analog

& Digital

BIST

2.5 V

Ref.

Temp.

15 TM

Safety Functions implemented :

1 – Power supply and Supervisor • Over-voltage detection • Under-voltage detection • Voltage supervisor provides independent

supervision of power supply • Second power supply not necessary

2 – Failsafe inputs • MCU error signal monitoring • Analog IC error signal handling

3 – Watchdog • Windowed watchdog (timing selectable

1ms to 1024ms)

• SPI refresh Question / Answer principle (i.e. 8-bits challenger)

4 – Failsafe outputs

• RSTb MCU reset (active Low)

• FS0b System “deactivation” (active Low)

• FS1 PWM signal (active High) (ie. warning lamp, position lights)

PowerSBC10/20 – MC33907/8

Voltage Supervisor

Vaux 3.3 / 5.0V

VI/O - 3.3 / 5.0V

Vcore 2.4MHz

1.2 or 3.3V configurable Boost Driver

Vpre

440kHz Buck

Battery sense

Configurable

I/Os (6)

Fail Safe

Inputs

SecureSPI

INT

Analog Multiplexer

Energy

Management

State Machine

Fail Safe Output

Static&Dynamic

Vcan - 5.0V

RST Fail Safe

State

Machine

CAN

Physical Layer Fail Safe Inputs

MCU

Challenger Analog

& Digital

BIST

2.5 V

Ref.

Temp.

I/O[0:1]

I/O[2:3]

I/O[4:5]

FS[0]

FS[1]

RST

MISO

MOSI

SCLK

NCS

Vcore

Vpre

Vaux

VI/O

Vcan

Vsup

Vsense

16 TM

Fast Evaluation of SBC performance

− Generic Family Evaluation Platform kit

− EVB of MC33907 and MC33908

Friendly Graphical Interface

Working with USB to SPI : KITUSBSPIDGLEVME

− Attach Strategy : Enhanced EVB combining PowerSBC & Qorriva MCU

MC33908 (Mother Board) + MPC5643L (Daugther board)

Including demo code SW

Complete Technical Documentation available to ease Design

− Datasheets, Application notes, EVB contents

− SafeAssure Support Covering Safety Manual, FMEDA, Pin FMEA

− Official EMC reports from external laboratories: Target completion Sept 13

Easy to Use tools

− Power Dissipation prediction tool

17 TM

• Differentiating Points − Optimized to work with i.MX6 processors

− Quick-turn customizable output voltages, sequencing and timings

− Boost regulator to 5.0 V out for USB

− Field programmable OTP memory

− Power control logic with processor interface and event detection

• Product Features − 2.8V to 4.5V input voltage

− 14-ch,11.7A (PF0100); 12-ch, 7.5A (PF0200)

− 4 to 6 Channel configurable buck converters

− 6 user programmable LDO

− Forced PWM or automatic PSM operation

− Boost regulator, coin cell charger, DDR reference

− Programmable output voltage, current limit, soft-start, frequency switching, OTP fault interrupt

− High power 8x8 mm TQFN wettable flank package

− Consumer, Industrial and Automotive grade available

Applications - Performance tablets, eReaders, Navigation

- Industrial Single Board Computers

- Point of Sale (POS) terminals

- Automotive infotainment

- Human-machine interface, Home Automation

- Portable Medical

Most economical quick-turn programmable 14-ch/11.7A system power management solution with fully configurable voltages, sequencing and timings

** MMPF0200 has 3/4 buck regulators instead of 5/6

**

18 TM

• Differentiating Points

− Optimized for Freescale’s i.MX family

− Complete system lineup with highly integrated Power Management & User Interface features

− Switching and linear regulators with coordinated sequencing for system power tree

− Proven solution – millions of units shipped

− Full BSP support

• Product Features

− Boost, 4 adjustable buck regulators and 12 adjustable LDOs

− Battery charging with backup cell

− 10 bit ADC for monitoring battery and other inputs plus Coulomb Counter support module

− Real time clock / calendar / alarm

− Serial WLED GPbacklighting / flashlight

− Touch screen interface and ADC

• APPLICATIONS

− Tablets

− eBooks

− Smart Devices

− Portable Navigation Devices

− Ultrasound Medical Equipment

− Other Embedded Hand-held Devices

19 TM

High Side Switches with Diagnostic

Functions

Switch Detect, Output Driver, Multiplexer

System Power

Management

Battery & Energy

Management

System

Management &

Automation

Power Drivers

Power Analog

Switches

20 TM

SMARTMOSTM

Protection and diagnostic • Over temperature (175°C)

• Over current shutdown

• Over/under voltage

• Short circuit

• Reverse battery

• Loss of ground/Vbat

• Energy discharge protection

SPI Interface • Easy connection to the uP

• Programmability

• Daisy chain using SPI

• Programmable over current trip level

• Watchdog

• Embedded PWM module

Vertical Power stage

Best-in-class Technology • Planar HD5 and TrenchFet LFET

• 45V & 65V BV

Protection in the power

stage •Temperature sensor

• Current sensor

Power package

PQFN low cost power package • 0.5 mm thick lead frame

• Die soldered attached

• Rthj-c < 0.5°C/W

SOICeP32 and 54 • Designed for high power

• Large al wire capability

•Pb-free compliancy

21 TM

• Heater

• Electric doors

• Wiper

• Washer pump

• Low end robotic

• Machine inspection

• Vending machines

• HVAC

• Hospital bed controller

DC Motor

• Solenoids

• Water and fluid control app

• Valves controllers for thermostats

• Home Automation system

• External lighting

• Xenon

• Halogen

• LEDs

• PLC

• Industrial printing systems

• POS terminals

Inductive loads

Capacitive loads

Factory Automation

Start Stop

22 TM

• Differentiating Points

− Robustness: Unique over-current latch-off protection, full digital & analog diagnostic and protection features with embedded failsafe mode

− Integration: Unique daisy-chainable SPI control for dual low RDSon channels in a single package

− Accuracy: 5X better current sensing accuracy over temperature & supply voltage range with unique accurate temperature sensing capability

− Scalable: Compatible PCB foot print and SPI software driver among the 24A/36V product family

− Lowest RDSon in Dual Configuration: 20% smaller PCB due to lower power dissipation when using 12A/channel or 24A/dual in a thermally enhanced package

• Product Features

− Dual 24A/36V high side switch family with 6, 10, or 16 mohm RDSon channels

− Normal operating range: 8.0 - 36 V, extended range: 6.0 - 58 V

− Flexible load management 1-24A with possible parallel output operating modes

− Programmable dynamic threshold over current protection and over-temperature protection with programmable auto-retry functions

− 3.3 V and 5.0 V compatible 16-bit Daisy chainable SPI control

− ±5°C temperature and synchronous / asynchronous current (±10%) sensing

− Individually programmable internal/external PWM clock signals

Typical Applications

Transportation 12 / 24V

o 24V Lighting and capacitive loads

o Valves

o DC motors

Industrial

o High current / highly inductive loads

(solenoids)

o DC Motor control

o Factory automation

Dual 6mW Dual 10mW Dual 16mW

Scalable, programmable family of 24A/36V SPI-driven, dual-channel, smart

high-side switches with lowest RDSon for up to a 30% board reduction

23 TM

Overload

Module output

short-circuit

(20mW)

Load

short-circuit

(100mW)

loads

+ -

VPWR

Over

voltage

Over

temp

Under

voltage

Ground

loss

Load Shorted to

Battery

Open load

OFF – ON – LED Current sense

high precision Automatic PWM

System Diagnostic

Open load ON – OFF – LED

Load Shorted to Battery

Current sense

Switch Protection

Over temp

Ground loss

Reverse Battery

System Protection

Over-under voltage

Module output short-circuit

Load short-circuit

Overload

Up to 36V

eXtreme

Switch

SPI Fault Mgmt.

Simplified SW

24 TM

• Application Needs

26 * 2A loads with current sense

• Freescale SPI Solution

All devices can be connected in Daisy Chain

8 I/Os pins used for 26 loads SPI control

• Freescale Current Sense Solution

All non active current sense pins can be tri-stated

1 Analog Input on µC used for current sensing

• Freescale Solution Summary

only 9 IOs of µC required

only 2 Resistors for Fail Safe (Output and Status)

only 1 High Precision Resistor

A/D1

MCU

µC

Cha

in1

(8 d

evic

es)

SCLK

MISO

CS1

OUT1

OUT2 MISO

SCLK

MOSI

MOSI

CS

CSNS

OUT3

OUT4 MISO

SCLK

CS

CSNS

MOSI

Cha

in2

(5 d

evic

es)

SCLK

MISO

CS1

OUT1

OUT2 MISO

SCLK

MOSI

MOSI

CS

CSNS

OUT3

OUT4 MISO

SCLK

CS

CSNS

MOSI

Freescale Advantages vs. Competition

(2 outputs, 2 current sense & no SPI)

SPI and Technology

>30 IOs saved and >50 resistors saved !

(no Resistors for MCU connection)

Daisy Chainable and common Precision resistor

25 A/D saved and 25 high precision Resistors

saved ! (and/or external analog multiplexer)

SPI 2

Common Precision

resistor

SPI 1

eXtreme Switch saves “Size – Weight – Cost” at module level

25 TM

• Evaluation kit

KIT06XS4200EVBE for the Dual 6 mOhm device

KIT10XS4200EVBE for the Dual 10 mOhm device

KIT20XS4200EVBE for the Dual 20 mOhm device

• Reference design

16-bit MCU S12G, 4 eXtreme Switch devices, CAN Physical Layer, 5V regulator

• Application notes and tools MC06XS4200 / MC10XS4200 / MC20XS4200 Datasheets

AN2467: Power Quad Flat No-Lead (PQFN) Package

AN3298: Solder Joint Temperature and Package Peak Temperature

AN4516: IBIS Model File for Dual 24V High Side

AN4474: EMC and Fast Transient Pulses Performances for Dual 24 V High Side

AN4473: Compact Thermal Model for Dual 24V High Side Switch

AN4515: Lifetime Computation for Dual 24V High Side

AN4542: Repetitive Short-Circuit Performances for Dual 24V High Side

Microsoft Excel© Thermal Calculator

Cadence Orcad© Behavioral models

26 TM

• Differentiating Points − Robustness: Unique over-current latch-off protection, full digital and

accurate analog diagnostics, and protection features with embedded failsafe mode

− Integration: 5 configurable low RDSon channels with daisy-chainable SPI

− Density: Thermally enhanced package for affordable high switch count modules with up to 30% lower power, 30% smaller PCB footprint and 50% fewer components

− Accuracy: Advanced current sensing over temperature and supply voltage range allowing accurate current monitoring from 25mA to 22A

− Scalability: Pin and SW driver compatible family − Best thermal efficiency: Lowest RDSon in penta configuration

• Product Features

− Penta 5 x 17mohm and penta 3 x 7mohm + 2 x 17mohm configurations − Operating voltage range from 6 - 18 V with sleep current < 5.0 μA − Flexible load management up to 11A, 22A with enhanced thermal

management − Enhanced output current sense (down to 25mA) with programmable

synchronization signal, ±5°C temperature and ± 1% battery voltage feedback

− 5.0 MHz 16-bit daisy chainable SPI control − Full diagnostic and protection including over-current profiles, output-

ON and –OFF open load detections, thermal shut-down, pre-warning, and fault reporting

− Individually programmable internal/external PWM signals with 8 bit duty cycle control

− Watchdog and failsafe mode − External smart power switch control

Typical Applications Transportation

o 12V Lighting from High beam to LEDs

o Valves

o DC motors

Industrial

o High current / highly inductive loads

(solenoids)

o DC motor control

o Factory automation PLC

Scalable family of 22A/18V programmable penta high-side switches with wide range diagnostic

current sensing and lowest RDSon for up to 30% smaller PCB and 50% lower component count

27 TM

• Differentiating Points − Flexibility: fully protected 30A High Side switch with adjustable

slew rate to control loads from DC to 60kHz including self recovery features. Gate driver configurable signal of external low side for protected half bridge application.

− Robustness: Full High side protection including current sense and temperature sense and reverse battery protection. Cross-conduction protection in case of half bridge configuration. Hardware-configurable low side overcurrent protection included.

− System integration: 30A - 400W DC motor control capability thanks to low Rdson and good thermal enhanced package. Configurable slew rate allowing best tradeoff between switching losses and EMC performance for a low cost EMI filter.

• Product Features − Operating range from 4.5V to 27V

− Single 4.0 mW RDS(ON) maximum high side switch

− PWM capability up to 60 kHz with duty cycle from 5 % to 100 %. Charge pump included

− Slew-rate control with external capacitor for EMC versus power losses tradeoff optimization

− Overcurrent and overtemperature protection, reverse battery protection, undervoltage shutdown, and fault reporting. Output current monitoring and temperature feedback

− Gate drive signal for external low side Nchannel MOSFET with protection features. Includes cross-conduction protection and flexible Low Side.

Typical Applications • Fan engine cooling

• Air conditioning blower

• Pumps (oil, fuel, water…)

• Compressor

• Marine systems

• Farm equipment

• Actuator controls

High-current and High frequency capable, smart high side switches with protected half

bridge configuration enable up to a 25% board area reduction and module simplification

28 TM

• Differentiating Points

− Switch input voltage range -14 V to VPWR, 40 V Max

− Supply voltage range 5.5 V < VPWR < 26 V

− Selectable wetting current

16mA or 32mA (part selectable)

− Standby current: VPWR 100 uA max, VDD Standby 20 uA max

− Analog multiplexer with SPI control.

− 32 ld SOIC Thermally Enhanced SOIC EP

• Product Features

− Detects 22 switch inputs:

14 switch-to-ground inputs

8 programmable inputs (switch to battery or ground)

− Direct Interface to a MCU using a 3.3V/5.0V SPI protocol

− Selectable wake-up on change of state

− 24-1 analog multiplexer

− WAKE_B pin to control power supply enable

− INT_B pin for active interrupt on change of switch state.

Typical Applications • Automotive

• Body electronics

• Powertrain

• Industrial

• Relay closure detection

• Industrial control

• Security systems

Switch detection solution targeting body electronics and industrial applications.

SP0

SG12

SG13

SG0

SP7

SP1

Battery

VBATP

VDD

MISO

MOSI

SCLK

AMUX

EP

GND

WAKEb

Battery

MC33909

VDD

VDD

Bolero

MISO

MOSI

SCLK

AN0

INTb

CSb CSb

INTb

SG1

29 TM

System Power

Management

Battery & Energy

Management

System

Management &

Automation

Power Drivers

Power Analog

Switches

30 TM

• HVAC

• Heat pump

• Access control

• Security camera mounting

Building Home Control

• Vending machine

• Ticketing machine

• POS terminals

• Power tools

• E-bikes

• Infusion pump

• Continuous Positive Airway

Pressure

• Ventilator

• DC motor

• Servo motor

• Stepper drive

Others Medical Electronics

Factory Automation

31 TM

• Differentiating Points − 4 programmable controllers for flexible current profile

management − Tightly coupled feedback with 0.9 uS response time

(16x faster as compared to standard solution) − 5 high / 7 low side pre-drivers with dedicated

integrated boost controller − Outputs configurable for up to 3 banks with external

high side driver − Output current and voltage sensing with integrated

diagnostic processing − 13 GPIO (StartX, Flags, OA_x, DBG, IRQB)

configurable as independent line level outputs − Embedded encryption for microcode protection − SPI control with IRQB plus 3 interrupt flags − System BOM cost reduction up to 13%

• Product Features − 9 – 32V continuous supply, 5.5 – 58V transient − Up to 72V pre-driver operating range − Precision peak & hold drive capability − Four independent controllers allow independent

solenoid operation without microcontroller intervention

− Integrated DC-DC boost converter control circuitry – up to 300kHz PWM

− 100kHz PWM frequency for other pre-drivers − Robust built-in ESD protection – withstand up to 80V

maximum rating − Choice of four programmable slew rates 12.5V/uS –

300V/uS − 10 x 10 mm 64p LQFP-EP

Typical Applications

− Gasoline/Diesel Direct

Injection (GDI/DDI)

− Dual Clutch Transmissions

− Industrial Precision Solenoid

Control

Programmable controller for driving up to 6 solenoids with precision output current profiles

in dynamic load environments with integrated 72V high side and low side pre-drivers

Bank 1

Boost DC-DC

converter

Bank 1 & 2: topologies for both Banks are the

same and can drive up to three solenoids per Bank

Cro

ss

bar

Sw

itch

Dual mC

ore

s

Vo

ltag

e M

on

ito

rin

g

Lo

gic

Co

ntr

ol

Dual mC

ore

s

32 TM

• Differentiating Points − Best thermal efficiency: 2X lower thermal impedance

with SOIC package, saving board space and simplifying design

− Automatic thermal back-off: Temperature regulated, peak current limiting ensures continuous high availability operation

− Real-time load current monitoring: Analog feedback current mirror feature used for motor control or load protection

− Design-in simplicity: Integrated H-Bridge with charge pump, control, protection and four MOSFETs

• Product Features

− Single and Dual H-Bridge configurations − High efficiency 125 mΩ typical RDS(ON) − 5.0 V to 28 V continuous operation, 42 V transient − 5.0 A continuous, 100 A pulsed delivered to inductive

loads − 3 & 5 V TTL/CMOS compatible

− Status Flag output reports under-voltage, over-current, and over-temperature fault conditions

Auto Applications • Throttle Control

• Exhaust Gas Recirculation

• Shock Absorber / Braking

• Rear Window control

Industrial Applications • Robotics / Factory Automation

• POS, ATM, Vending Kiosks

• Security Camera (PZT)

• Medical

Most thermally efficient 28V/5A H-Bridge DC motor driver featuring real-time load current

monitoring and automatic thermal back-off ensures high availability operation in demanding

high current, high temperature automotive and industrial applications

MC33926 (PQFP)

MC33931EK & MC34931EK (SOIC) Single

MC33932EK & MC34932EK (SOIC) Dual

Single H-Bridge Application

33 TM

MC33926R2 (PQFP)

MC33931EK & MC34931EK (SOIC) Single

MC33932EK & MC34932EK (SOIC) Dual Development Kits with Evaluation Board

Includes:

• Development board

• Instruction Sheet

• Schematic and Bill-of-Material

• Software and Ribbon Cable

• Available now at:

KIT33926PNBEVBE

KIT33932VWEVBE

KIT33932EKEVBE

Compatible with USB computer interface board

• Available now at: KITUSBSPIDGLEVME

Samples/Production available now

MC33926R2: PQFN, Single, Automotive

MC33931VW: HSOP, Single, Automotive

MC33932VW: HSOP, Dual, Automotive

MC33931EK: SOIC, Single, Automotive

MC33932EK: SOIC, Dual Automotive

MC34931EK: SOIC, Single, Industrial

MC34932EK: SOIC, Dual, Industrial

34 TM

• Differentiating Points

− Extended supply operation range from 6V to 58V

− Wide dead time range (0 ns – 10.5 µs) is programmable via SPI interface

− Robustness design against large positive or negative transient spikes on gate driver

− Protection against reverse charge injection from CGD and CGS of external FETs

− Device configuration and diagnostics via SPI

• Product Features

− Suitable for 12V, 24V, or 48V motor systems

− Direct interface to 3.0V/5.0V MCUs

− Greater than 1.0 A gate drive capability with protection

− Charge pump for operation with supply voltage less than 17V

− Rich diagnostic features accessible via SPI interface

Typical Applications

− Portable electric power tools

− Electric bicycles and wheelchairs

− HVAC fans and pumps

− Industrial and consumer robots

− Vacuum cleaner

Three-Phase FET Pre-driver with extended voltage range (6V to 58V) and robust fault-

monitoring and failure protection for industrial brushless DC (BLDC) motor control

35 TM

• Differentiating Points − LIN conformance and ESD/EMC robustness − Integrated MCU and analog features in the

same package − Easy control of high-current motors using

relays and current sense features − Internal protection features provide full

protection for output stages (with status reporting)

− Six configurable wake-up inputs for maximum system flexibility

− Low-power mode flexibility and wake-up options, including 7 wake-up sources

− Reverse-battery-protected voltage sense

• Product Features − Integrated SBC − Robust LIN physical layer − Integrated MCU, Flash, RAM − Low-power features, Multiple wake-up features − 18V Hall Sensor Supply − Current Sense Module with selectable gain − Battery Voltage Sense with Low Battery

warning and reverse Battery protected − Six High voltage inputs with Wake-Up

capability − 2 protected High-Side outputs, 2 protected

Low-Side outputs to drive inductive loads

Typical Applications • Automotive

• Window lift, Seat Control, Sunroof

• Fan Control

• Industrial

• 24V Brushed DC Motor Control

• 24V Actuator Control: Intelligent Relay

Driver IC / Circuit Braker

Integrated Intelligent DC Motor Driver single-package solutions targeting

satellite / space constrained applications such as car window-lift and factory automation

36 TM

System Power

Management

Battery & Energy

Management

System

Management &

Automation

Power Drivers

Power Analog

Switches

37 TM

• Differentiating Points − Scalable and flexible solution suitable for various engine sizes

(25–1000cc) and cylinders (1-4) ; accommodate FlexFuel. Dedicated devices for 1 cylinder low end (MC33812, MM912_812 (SiP)), 1

cylinder High End (MC33813), 2 Cylinders High End (MC33814)

− Integrates all necessary analog functions into the IC for lower system complexity Ignition pre-driver, Injector driver, VRS, Tachometer, Fuel pump, Sensor

supply

− System integration MM912_812 (SiP - MCU + Small Engine Controller in single package)

• Product Features − Supports supply voltage range of 4.5 V ≤ VPWR ≤ 36 V − Differential/single-ended VRS conditioning circuit with

auto/manual selectable thresholds (MC33813/14) − Up to two Fuel injector drivers − Up to three pre-drivers for ignition, O2 sensor (HEGO) or general

purpose − Up to three drivers for fuel pump, lamp, and power relay control − Independent fault protection with all faults reported via the SPI − ISO-9141 K-Line interface for communicating diagnostic

messages − KeySwitch logic with provision for power relay and MCU controlled

shutdown

Typical Applications

− 1 to 4 cylinder electronic engine

control

− Electronic Fuel Injection (EFI)

− Capacitive Discharge Ignition

(CDI)

Engine control analog power IC intended for 1 to 4 cylinder motorcycle and other small engine control applications

38 TM

MC33813 and MC33814 EVB

and Reference Design

• Hardware Development Tools

− MC33812 EVB and Reference Design

− MM912_812 (SiP) EVB and Reference Design

− MC33813 EVB and Reference Design

− MC33814 EVB and Reference Design

− CDI EVB and Reference Design (in Development)

− Available now at www.freescale.com/smallengine

• Software Development Tools

− FSL CodeWarrior

− MicroSquirt ECU application code (EFI)

− Freescale ECU application code (EFI, CDI)

− Available now at: www.freescale.com/smallengine

• Relevant Application Notes:

− AN4258: Serial Bootloader for S12(X) Microcontrollers Based on 180 nm Technology

− AN3961: EEPROM Emulation for the MC9S12XS and MC9S12P Families Using AN2302 as a Reference

− AN3937: MC9S12P-Family Demonstration Lab Training

39 TM

System Power

Management

Battery & Energy

Management

System

Management &

Automation

Power Drivers

Power Analog

Switches

40 TM

• Differentiating Points

− LIN conformance and ESD/EMC robustness

− Configurable ADC HW filters reduce Software complexity

− Lower average current consumption

− Variety of voltage input types to address various applications

• Product Features

− Integrated MCU, Flash, RAM, communication

− 3x 16-bit ADC for Current, Voltage and Temperature

− Low-power features

− Multiple wake-up features (Current, temp, etc)

− Configurable HW filters

− Robust LIN physical layer

− MM912J637: 16-bit MCU targeting lead acid battery management over LIN interface

− MM9Z1J638: High-end 16-/32-bit MCU targeting a wide range of battery applications over CAN or LIN interface

Typical Applications For mission critical battery operations: • Automotive

• 12V Lead Acid, 14V Li-Ion • 48V HV BMS, Battery Junction Box

• Trucks & Utilities • 24V Lead Acid

• Industrial • Energy Storage Systems (ESS), UPS • Industrial Automation precision monitor • Cordless tools & appliances

Integrated precision battery monitoring single-package solutions targeting mission-

critical applications such as start-stop vehicles and energy storage systems

MCU

ANALOG

Cascaded

Voltage Regulators

Die To Die

Interface

Reset

Control Module

RE

SE

T_

A

VDDA

ISENSEL

LIN

VS

UP

D2DDAT6

D2DDAT7

D2DCLK

D2DINTWake Up Control Module

(with Current Threshold

and Current Averaging)

VBAT Sense Module

(AAF, and optional Inputs)

Interrupt

Control Module

PGA

with Auto Gain

Control

Low Pass Filter

And

Control

ISENSEH

Internal Chip

Temp Sense

(with optional

external inputs)

VD

DL

VD

DX

SCI

D2DDAT2

D2DDAT3

ADC Regulator

PTB1

G

P

I

O

PTB0

PTB2

LIN

Physical

Layer

Analog Die

S12Z CPU

CPU

RegisterALU

D2DI

Flash 128k Bytes with ECC

EEPROM 4k Bytes with ECC

RAM 8k Byte

Debug Module

include 64 byte Trace Buffer RAM

Reset Generation and

Test Entry

Amplitude Controlled

Low Power Pierce Osc.

PLL with Freq. Modulation option

OSC Clock Monitor

Single-Wire Background Debug

Module

COP Watchdog

Periodic Interrupt

Interrupt Module

SPI

DD

RA

MOSI

MISO

SCK

PT

A

MCU Die

SS

PA2

PA3

PA4

PA5

PA

7

TEST

PTE1 / XTAL

BK

GD

/MO

DC

RE

SE

T

VS

SD

2D

VD

DD

2D

DG

ND

AGND

Test

Interface

TC

LK

TE

ST

_A

VD

DH

BIAS

4 Channel Timer

Trimming /

Calibration

LG

ND

Inte

rnal B

us

VSENSE2

VSENSE3

Inte

rnal B

us

VREG

1.8V Core

2.7V Flash

VD

DR

X

VS

SR

X

D2DDAT4

D2DDAT5

D2DDAT0

D2DDAT1

PC0

PD7

PD3

PD6

PD2

PD5

PD1

PD4

PD0

PC1

16 Bit

ADC

ADCGND

PA0

PA1

GN

DS

UB

GN

DS

UB

GN

DS

UB

PTE0 / EXTAL

PA6

PTB3

16 Bit

- ADC

16 Bit

- ADC

PTB

[1:0]

msCANTxD

RxD

VSENSE0

VSENSE1

PTB4 (CAN wu Input)

PTB5 (GND SW)

Current Sense Module

VDDH = 2.5V

(D2D Buffer)

VDDL = 2.5V

(Internal Digital)

VDDX = 5V

(MCU, ext CAN Phy)

TxD dominant

fault detetction

Scaling to diff

shunts

1/

10

1/

16

1/

28

1/

52

41 TM

Multiple Cells

Product Function

• Measurement of battery

Voltage, Current &Temperature

• Determination of key

battery characteristics: • State of Charge (SoC)

• State of Health (SoH)

• State of Function (SoF)

• Cell Measurement

• Control of Balancing & Motor

driver circuitry

• Safe Communication to Host

• ECU Power management

Application Examples:

• 4 cell Li-Ion Battery

UPS

Product Function

• Input Sensing

• Battery Switch Control

• Boost Control

• Battery Control

• Buck Control

• Output Sense

9Z1_638

Multi- Battery

Product Function

• Measurement of battery

Voltage, Current and

Temperature

• Determination of key

battery characteristics: • State of Charge (SoC)

• State of Health (SoH)

• State of Function (SoF)

• Communication to Host

• ECU Power management

Application Examples:

• Truck/ light vehicles

• Forklifters

42 TM

Low-Cost Battery Controller

Product Function

• Meas of Battery Stack Voltage

• Measure Battery Stack Current

• Meas of Switch position

• Control Switch pre-drivers

• Control Stack of Battery Module

• SoC / SoH calculation

Application Examples:

• E-bikes

• Power tools

HV Battery Junction Box

Product Function

• Meas of stack voltage

• Meas of Total Current

• Meas of HV Switch position

• Safe communication (CAN) to

Host

Application Examples:

• Battery Junction Box of Auto EV/

HEV Batteries and ESS Batteries

Battery Module Controller

Product Function

• Meas of Redundant

Battery Module Voltages (Supervisor

for safety critical measurements)

• Measure Battery Module Current

• SoC / SoH calculation

• Charge Balance control

• Fast and Safe Communication to Host

using CAN)

Application Examples:

• Safety critical HV Batteries

for Auto EV/ HEV and ESS

9Z1_638 9Z1638

9Z1638

Battery

43 TM

• Fast Evaluation of Device performance − EVBs for MM912_637 and MM9Z1_638 Friendly Graphical Interface

Easy to use debugging tool

CodeWarrior compiler

ProgsS12 P&E

• Complete Technical Documentation available to ease Design − Datasheets, EVB contents − Safety Assessment / FMEDA in development for MM9Z1_638 − Official EMC reports from external laboratories

• Reference Designs

− MM912_637 Reference design in development 12V PB Battery (LIN)

− MM9Z1_638 Reference designs in development 12V PB Battery (LIN)

12V PB Battery (CAN)

14V 4-cells Li-ion Battery (CAN and LIN)

• Easy to Use tools: Support design wins − Technical Training and hands on training on demand − FAQ and other technical marketing presentations

44 TM

System Power

Management

Battery & Energy

Management

System

Management &

Automation

Power Drivers

Power Analog

Switches

45 TM

• Differentiating Points − Scalable to 4 TX channel and 12 RX channels with

simultaneous active channels to enable a single platform capable of electronic beam steering across a wide field-of-view

− Advanced packaging technology to ensure the highest performance and minimum signal interference on the customer PCB

− Low power consumption 2.5 W typical for the complete transceiver

− Supports fast modulation at 100 MHz / 100 ns − Best phase noise performance < -85 dBc/Hz at 100 kHz

offset to improve target separation − Integrated baseband filter and VGA saves system bill-of-

materials cost − Local oscillator at 38 GHz to lower the distribution loss and

reduce system interference − Bi-phase modulator on the transmitter chip supports

improved detection accuracy

• Key characteristics − Differential Tx outputs delivering minimum 10dBm with

integrated bi-phase modulator for advanced correlation coding

− Tx output power adjustable via SPI with 5-bit digital control

− Each Rx channel has integrated VGA and BB filtering matched to RaceRunner sigma-delta A/D converters for optimal performance

− Built-in receive chain test mode when using RaceRunner microprocessor

− Each part addressed via a common SPI bus − Temperature detector on each MR2001 chip − VCO provides four 38GHz LO distribution ports with

independent power control and power detectors − VCO phase noise better than -95 dBc/Hz@1 MHz offset

Typical Application Diagram

Preliminary — Subject to Change Without Notice

The MR2001 chipset is a scalable radar solution for high end and low end ADAS

applications, industrial safety, security, and robotics

Typical application

ADAS 77GHz Radar, Industrial Safety, Security,

and Robotics

TM 46

• Power Management: MC33907 and MC33908, new generation of System Basis Chip, combine energy efficient DC/DC Power Supply that support lowest operating voltages standards and advanced functional safety mechanisms.

• eXtreme Switch: Scalable, programmable family of 24A/36V SPI-driven, dual-channel, smart high-side switches with lowest RDSon for up to a 30% board reduction

• Battery Management Systems: 24V integrated (BMS) for industrial UPS batteries, cordless power tools, small appliances

• 77GHz Radar system: Industry’s most complete radar system scalable to multiple channels for precise detection of objects for high end and low end ADAS applications, industrial safety, security, and robotics. PC Samples Q1 2014

PC Samples Now

MC Samples Now

PC Samples Q4 2013

TM