forming in car body engineering 2017 - automotive circle · 2020-01-27 · forming in car body...
TRANSCRIPT
FORMING IN CAR BODY ENGINEERING 2017
26 – 27 SEPTEMBER 2017BAD NAUHEIM, GERMANY
PLUS!
TUTORIAL
„Sheet Metal Forming“
25 September 2017c a r b o d y e n g i n e e r i n g
Dr. Dirk MeinePresidiumAutomotive Circle, DE
Be there and be part of these
discussions. We are looking
forward to meeting you
in Bad Nauheim!
PRECISION AND QUALITY – WITHIN REASON
That probably best describes the core demand encountered
in the industrial car body part production in the press plant
and tool shop. The precise realisation of often challenging
design specifications, using modern lightweight materials,
shorter development times, higher production flexibility,
all that under strict cost constraints and ‘ideally’ in close
collaboration with subsequent production subsections –
these are the requirements you have to fulfil as an automo-
bile engineer in car body part production.
The international Automotive Circle conference Forming in
Car Body Engineering offers you the ideal forum to discuss
latest developments in this field. Innovative process
technologies and material applications, short tooling times,
new forming technologies, efficient use of CAE tools as well
as the question “Where are the reasonable limits in the
efforts to achieve higher quality – specifically customer-per-
ceivable quality?” will be at the center of the debates at the
conference this year.
You cannot be present in Bad Nauheim?
Make use of our free LIVE-Stream-Service
and follow the marked presentations
online!
LIVE-STREAM
LIVE POLLS ON SITE
Ask your specific questions
concerning car body part production
and benefit from the answers of the
conference‘s expert audience!
Discuss the topics “Customer-perceived
quality” and “Tooling lead time” in two
parallel workshops!
EXCLUSIVE WORKSHOPS
Dr. Josef MeinhardtBMW Group, DE
Tommaso GiuntiCentro Ricerche Fiat S.C.p.A., IT
Hideki TaokaHonda Motor Co., Ltd., JP
INTERNATIONAL OEM ADVISORY BOARD
Dr. Michael RuppAdam Opel GmbH, DE
Ghislaine PrajescuPSA Peugeot Citroën, FR
Marc CappelaereRenault S.A.S., FR
Niklas SonessonVolvo Car Corp., SE
Dr. Jens KappeyVolkswagen AG, DE
MEET THE
LEADING
OEM NETWORK
THE CONFERENCE ADDRESSES
International automotive OEM engineers responsible
for the pre-development, development, planning and
quality control of car body part production processes,
in press plant, tool shop or foundry, as well as their
system suppliers and engineering service providers
involved in relevant development projects.
TUTORIAL
SHEET METAL FORMING
25 SEPTEMBER 2017, 10.00 H – 18.00 H
Dr. Michael Rupp, Adam Opel GmbH/ Technische Hochschule Mittelhessen – University of Applied Sciences, DE
Before the start of the main conference, the concise one-day tutorial on Sheet Metal Forming offers newcomers to the
field the opportunity to learn about or refresh the relevant technological fundamentals of sheet metal forming processes in the automotive industry.
THE TUTORIAL ADDRESSES:
* Metallurgic effects in forming operations, formability of different metal materials
* Requirements and challenges in the production of panel-based car body parts
* The car body part development process, from part design via method and process planning to tool construction and production, tryout processes and series production
* Modern press plant and press technology
* Forming simulation and process optimisation
* Hot-forming processes
Specific emphasis will be placed on topics of particular interest to the tutorial participants.
IN
ENGLISH
Please note that the tutorial and the main
conference are independent events. Explicit
registration for the tutorial is required.
PROGRAMME
LIVE- STREAM
TUESDAY, 26 SEPTEMBER 2017
9.00 h Welcome and conference introduction
Dr. Dirk Meine, Automotive Circle, DE
HOT FORMING OF STEEL AND ALUMINIUM
9.15 h Hot forming of high-strength steels and aluminium
alloys for complex car body parts – From scientific
fundamentals to industrial applications
Prof. Dr. Marion Merklein, Friedrich-Alexander-Universität
Erlangen-Nürnberg (FAU), Institute of Manufacturing
Technology (LFT), DE
9.45 h Servomechanical press for hot-stamping
Aitor Ormaetxea, Fagor Arrasate S. Coop., ES
10.15 h Investigations on aluminium hot and warm forming
with the help of virtual process modelling
Dr. Christian Koroschetz, AP&T AB, SE
10.45 h Coffee and contacts
11.15 h Supporting lightweight design: Virtual modelling of
hot stamping with tailored properties and warm and
hot formed aluminium
David Lorenz, ESI GmbH, DE
11.45 h All-new three-dimensionally formed ultra-high-
strength steel application
Kurtis Horner, Honda R&D Americas, Inc., US;
tba, H-one Co., Ltd., JP
12.15 h Live polls in the auditorium
12.30 h Lunch break
TOOLING AND PRESS TECHNOLOGY
13.45 h Casting weight reduction by die design topology
optimisation
Kadir Akcan, Ferit Fırat, Ford Otomotiv Sanayi A.Ş., TR
14.15 h Combining recent developments in advanced tool
material with new tool manufacturing strategies to
make high performance tools
Isaac Valls, Rovalma S.A., ES
14.45 h Flexforming of an automotive side impact beam
Dr. Björn Carlsson, Quintus Technologies AB, SE
LIVE- STREAM
15.15 h Impact of laser blanking on automobile series
production processes
Bernhard Köhler, Schuler Automation GmbH & Co. KG, DE
15.45 h Coffee and contacts
16.15 h
OEM FOCUS TOPICS AND QUESTIONS
In two parallel focus workshops, the conference discusses two impor-
tant topics in today’s industrial car body part production. The workshop
topics and question will be initiated by OEM impulse presentations
outlining the current situation and issues to be addressed.
WORKSHOP 1: Customer-perceived quality
What parameters govern customer-perceived quality and how
are they determined for future car body projects? What trends
are noticed and how will they affect car body part production
and car body engineering in general?
OEM impulse:
Hideki Taoka, Honda Motor Co., Ltd., JP
Niklas Sonesson, Volvo Car Corporation, SE
WORKSHOP 2: Tooling lead time
What can be regarded as best practice procedures from the
start of die design to full functioning dies delivering full
performance and quality? How to reach that best practice?
OEM impulse:
tba
18.15 h Meet the Speakers/Get Together
19.00 h Networking Night
WEDNESDAY, 27 SEPTEMBER 2017
FORMING SIMULATIONS
9.00 h Numerical investigation of the influence of a moving
bolsters elastic behaviour on punch active surface
Fabian Zgoll, Volkswagen AG, DE
9.30 h A study on the body side design method for robust-
ness of press mold structure using PAM-STAMP
coupling simulation
In-Suk Oh, Hankook ESI Co., Ltd., KR; Dr. Yun-Jun Song,
Hyundai Motor Company, KR
Programme updates at www.automotive-circle.com
Subject to change (status as of 3 July 2017)
LIVE- STREAM
LIVE- STREAM
10.00 h Coffee and contacts
10.30 h Design and FE modelling of 3D roll forming of
UHS automotive components
Dr. Boel Wadman, Swerea IVF; Dr. Michael Lindgren,
Ortic AB; SE
11.00 h A discussion of the limits of shell-discretised
structures for sheet metal forming
Prof. Dr. Karl Schweizerhof, Dynamore GmbH, DE
11.30 h Presentation of the previous day’s workshop results
11.45 h Live polls in the auditorium
12.00 h Meet the Speakers
12.15 h Lunch break
MATERIAL-RELATED ISSUES IN FORMING TECHNOLOGY
13.30 h Forming issues as experienced with a DP 800
structural part
Martin Weisenburger, Adam Opel GmbH, DE
14.00 h New bending method improving bendability for
high strength steel
Adj. Prof. Lars Troive, SSAB, SE
14.30 h Prime lubrication treatment for enhanced pressing
of hot-dip galvanized outer panels
Chiel Dane, Tata Steel Europe Ltd.; Dick van der Net,
Coil Coating Technologies B.V., NL
15.00 h OEM conclusions
“Leading OEM experts report on their current challenges
in car body part production and their wish-list for the
future: What are the most important development goals?”
15.15 h Farewell address and end of the conference
YOUR CONTACT Jannike von KampenJunior Event ManagerAutomotive Circle T +49 511 9910-384jannike.von.kampen @vincentz.net
TERMS & CONDITIONS
REGISTRATION PROCEDURESVincentz Network GmbH & Co. KGAutomotive CirclePlathnerstr. 4cDE-30175 HannoverT +49 511 99 10-384F +49 511 99 [email protected]
ONLINE REGISTRATIONwww.automotive-circle.com
DATE AND VENUEConference: 26 – 27 September 2017Tutorial: 25 September 2017
CONPARC Hotel & Conference Centre Bad Nauheim Elvis-Presley-Platz 1, DE-61231 Bad NauheimT +49 6032 303-0, F +49 6032 [email protected]
We kindly ask you to make your own hotel reservation at the conference hotel, please refer to Automotive Circle. The hotel offers special room rates from 135,– € to 155,– € depending on different cancellation conditions. The mentioned room rates include 5,– € breakfast per person and per day.
CONFERENCE FEESConference: Early-bird: 1.595,– €* Standard: 1.795,– €* Tutorial: 850,– €*
Early-bird price available until 28 August2017. Students will get 50 % discount on standard prices on presentation of a valid student ID.* All prices plus 19 % German VAT. All conferences in Europe are subject to VAT. To reclaim, please contact your local tax office.
CONFERENCE FEES INCLUDEConference: Fees including full conference participation, incl. conference materials and list of delegates, the authority for down- loading the presentation on the internet, luncheons, catering and the participation in the evening networking event.Tutorial: Participation in the tutorial is not included in the conference fee; the tutorial needs to be booked separately. Tutorial fees include participation, tutorial materials, list of delegates and catering during breaks.
CONFERENCE LANGUAGEThe conference will be translated simultaneously into English and German. Please note that the contents of lectures and presentations at simultaneously interpreted conferences are predominately composed in the English language.
CANCELLATIONSFees will be refunded in full if notice of cancellation is received by 28 August 2017. 50 % of the conference fees will be refunded in case notification of cancellation is received later, but not later than 11 September 2017.
Delegates who fail to attend without notifying the organiser will be liable for the whole conference fees. Substitutions of delegates may be made at any time. Cancellations and changes should be notified in writing. In all cases date of postmark shall apply. Any fees to be refunded will be paid after the end of the conference. The organiser reserves the right to change the programme content or to cancel the event due to important reasons. Cancellation fees of third parties that may appear in this context will not be reimbursed.
DATA PROTECTIONVincentz Network produces a list of delegates for each event which may include the follow- ing information: company name, address (zip code, city, country), name and job function of delegate. This list of delegates will be made available for all conference delegates, speakers, exhibitors and sponsors of the event, who may use the data for promotional purposes. Objection against publication and circulation of this data may be made at any time until 3 weeks prior to the event and has to be made in writing to the organiser. Company’s name, city and country might be published on the internet as reference for upcoming Automotive Circle conferences.
PLEASE NOTEBy registering you understand that your participation and attendance at the conference may be videotaped, filmed and/or audio recorded. You agree that the recording may be used for any lawful purposes that Vincentz Network, or its designees, in their sole discretion, may determine. The address data are processed for customer service and information purposes in compliance with the German Federal Data Protection Law. Company’s name, city and country might be published on the internet as reference for the upcoming conferences of Automotive Circle.
PICTURES ©Natalia Hora/fotolia.com , Vincentz Network
REGISTRATION
FORMING IN CAR BODY ENGINEERING 2017
I hereby register for (For prices see terms & conditions.)
CONFERENCE 26 – 27 September 2017
TUTORIAL: Sheet Metal Forming 25 September 2017
Title First Name
Name
Phone
Company
Department Function
Street
Zip Code/City
Country
Order No.
Expiry Date
Verification CodeCard Number
Date, Signature
METHOD OF PAYMENT Credit Card American Express Mastercard Visa
www.automotive-circle.com, mail to: [email protected]
Cardholder
Yes, I want to be informed about future Vincentz Network events and products via e-mail.