Form Fill & Seal Bagging

Vertical Form Fill & Seal (Flat Film)

For more than a decade Kockums Bulk Systems has represented Italian company B&C who engineers and manufactures automatic Form Fill & Seal Machines (FFS) for making & filling plastic bags. The three basic machines cover a wide range of bag sizes; and there is a large baling machine.

Bags 5-50kg

Rate up to 60 bpm

Minimal moving parts, low maintenance

Easy access for clean down

Fully guarded in accordance with Australian safety standards

When combined with one of our automatic palletisers it is the ideal fully automatic bag filling, palletising and wrapping system

Flat film

Salt | Bark | Calcium Carbonate | Sugar | Mulch | Starch | Flour | Sand | Stones | Cement | Milk Powder

Raw material infeed

Bag flattener

Bagging Machine

Forming tube holder

Infeed hopper

Volumetric or gravimetric dosers

BAGGING MACHINES

Bagging & Baling

Baling Machine

The Baling machine is the largest in the range of the B&C automatic form fill and seal bagging machines. Not only will it fill bales but the same unit can be utilised to perform conventional FFS bagging tasks such as potting mix, soils, sands, mulch, bark, & fertilizers.

As with the conventional FFS machines the bags start as a pre-printed flat roll of film loaded on the back of the filling machine. The film is simply fed through a series of rollers to the bale/bag forming tube. Multiple forming tubes can be hung on the machine for quick bag size changeover. Once the film is formed into the square bale shape, it is heat sealed at the back and bottom whilst the product is measured by weight or volume, and fed into the bag. At this point a hydraulic ram compresses the product into the bale prior to the top seal being applied.

Bales : 5-25kg

Bag Sizes : 10-80 litre (5kg to 50kg)

Baling Throughput : 3-8 compressed bales/minute

Changeover time : 15-20 minutes for different bale / bag sizes

Uninterrupted running time between film reel changes : 6-15 hours

Weight of plastic film reel = 500kg, changeover time 5 min

Handle making (small bags and small bales only)

Extra forming tubes for different bag/bale sizes

Flocculant | Titanium Dioxide | Activated Carbon | Fly Ash | Lime | Chaff | Magnesium Oxide | Bentonite

Bales with handles

Animal feed

Saw dust

Compact shipping

BAGGING MACHINES

Open Mouth Bagging

Empty bag magazine

Nickel Concentrate | Propellant | Carbon Black | Cocoa | Ammonium Nitrate | Clay | Zinc Oxide | Iron Oxide

Bagging rates of up to 1,380bph

For handling bags from 5 - 50kg

Fully enclosed for safety and cleanliness

Feed by gravity, belt or screw

Available in Stainless steel and special surface treatments

Suitable for hazardous environments

De-aeration probes for highly fluidized products

Special dosing system with customized screws for difficult products

The Payper CSA range of fully automatic open mouth bagging systems has been developed & perfected over 40 years of use.

This range of bagging machines is suitable for filling sacks from 5kg – 50kg and bag types such as paper, polyethylene, PE coated or Woven Poly-propylene.

BAGGING MACHINES

Form Fill & Seal Bagging

Horizontal Form Fill and Seal Machine (Tubular Film)

The Payper ASSAC range of automatic bagging machines have been specifically designed to form fill and seal bags from a roll of PE tubular film. It is capable of filling bags from 5kg to 50kg, with or without gussets, and can reach filling rates of up to 2,200bph (subject to application details) when fed through a Payper high-speed net scale with acceleration pipe.

The Payper PFG-10 air packer is specially designed for bagging fine powders into valve bags. The PFG-10 is simple in design and robust in construction and therefore is a highly reliable and efficient machine. This air-packer is commonly used in the chemical, mining, construction industry, feeding and milling industries.

Handles 5kg – 50kg bags

Rates of up to 2200bph

Fully automatic

Easy to clean

Handles 5kg – 50kg bags

Manual or automatic

Ultrasonic sealing

Low head room

Minimal moving parts, low maintenance

Easy access for clean down

Fully guarded in accordance with Australian safety standards

Valve Bag Packer

Diatomaceous Earth | Graphite | Feldspar | Fluoride | Limestone | Gypsum | Magnesia | Lead Oxide | Resin

BAGGING MACHINES

Concept Design & Testing

Engineering Design & Build

Install, Commission& Train

After Sales Support & Spares

From a project’s infancy Kockums can quickly and accurately provide concept designs and budget pricing for capital approval. At this early stage material trials are often under-taken at our Melbourne facility to help confirm solution selection.

Our In-house design engineering team design all equipment in compliance with Australian Standards and meeting our customers expectations. The Kockums Brand is well known for its “built to last” reputation and often unique approach.

Kockums offers installa-tion, commissioning and operator training. Equipment is fully assembled and tested prior to commissioning by experienced engineers to ensure optimum performance and efficiency.

Kockums has a trained service team providing spares and nationwide support to our clients. Every installation requires something different and our partnership program allows us to work with individual customers to determine the most effective level of support.

139 - 143 Bamfield Road, Heidelberg West, Vic 3081 Phone: +61 (3) 9457 8200 Fax: +61 (3) 9457 7695Email: sales@kockumsbulk.com.auwww.kockumsbulk.com.au

Bag Handling Bulk Bag & IBC Handling Mechanical Conveying Pneumatic Conveying

Process Equipment Bagging Machines Palletising & Wrapping Case & Carton Packaging

Vacuum Lifting Cranes Accessories Partner Support