form acpe application for a professional … · 1 form acpe application for a professional engineer...
TRANSCRIPT
1
FORM ACPE
APPLICATION FOR A PROFESSIONAL ENGINEER TO BE REGISTERED AS
ASEAN CHARTERED PROFESSIONAL ENGINEER (ACPE)
(To be completed by Applicant in BLOCK LETTERS)
PERSONAL DETAILS
Name: ..………………………………………………………………………………………………………….
Title : …………………………………………………………………………………………………………..
Identity Card/Passport No.: ……………………………………… Date of Birth: …………………………………….
PE Registration No.: …………………………………… Date of Registration: …………………………….
CONTACT DETAILS
Home Address:
………………………………………………………………..
………………………………………………………………..
…………………………………………………………………
Office Address:
……………………………………………..………………..………
……………………………………………………….…………..….
………………………………………………………..…………..…
City…………………….. State ……………………….………
City……………………….…..State …………...………………..…
Postcode …………………………………………………..….. Postcode …………………………………………………..………..
Tel. No: …………...….… Fax No.: …………….…………
Tel. No: …………...…… Fax No.: ……………………..……....…
E-mail : ……………………………………………………….
E-mail : …………………………………………………...……..….
ACADEMIC QUALIFICATIONS
First Degree/University………………………………………………..……. Date of Graduation……………………………..……….
………………………………….………………………………………………………………………..…………………………..……
Discipline of Engineering: ……………………………………………………………………………………………………………….
Post Graduate Degree/University……………………………………………..Date of Graduation………………………………..……
…………………………………………………………………………………………………………………………………………....
Discipline of Engineering:…………………………………………………………………………………………………………..……
DISCIPLINES FOR REGISTRATION (select 1 preferred discipline for registration purpose)
Civil Structural Geotechnical Environmental Mechanical
Electrical Chemical Mining Others (Please Specify) …………………………………………
Please affix recent
photo
(Passport size)
2
PROFESSIONAL EXPERIENCE
(in responsible charge of significant engineering work refer appendix D of MRA)
A B
STATEMENT OF TRAINING &
EXPERIENCE
(SINCE REGISTRATION AS
GRADUATE ENGINEER)
C Experience area
(in months)
E
Date
(mth &
year)
relating
to each
appointm
ent
Example:
July 90
to May
95
State concisely Title of Position held,
Name of Employer, Location and
Description of each work (Make
statement brief and concise,
designating each work upon which
engaged with or change of position
separately: include some indication of
magnitude and complexity of work in
which engaged, your duties and
degree of responsibility) If necessary
additional sheets may be attached.
N
ame,
Po
siti
on
an
d A
dd
ress
of
Pro
fess
ion
al E
ng
inee
r u
nder
wh
om
serv
ed
& c
on
tact
no
.
To
tal
D1 D2 D3 D4 D5
Sig
nat
ure
s o
f an
y P
rofe
ssio
nal
En
gin
eers
wh
o h
as p
erso
nal
kn
ow
led
ge
of
App
lica
nt’
s tr
ain
ing
or
exp
erie
nce
in t
he
per
iod
men
tio
ned
Des
ign
/Off
ice
Sit
e/fi
eld
Pla
nn
ing
/Man
agem
ent
Oth
er E
ng
inee
rin
g w
ork
s
Mas
ters
/Po
st g
rad
uat
e /
stu
dy
/
rese
arch
/tea
chin
g
S
ign
atu
re
Sig
nat
ure
Total
Month
3
DECLARATION
I hereby declare that:
I have had …………… years of practical experience in engineering and have complied with Article 3 of ASEAN
Mutual Recognition Arrangement (MRA) on Engineering Services.
YES NO
I am a Professional Engineer **
I meet all the requirement as stated in Article 3 of the ASEAN Mutual
Recognition Arrangement (MRA)
No disciplinary action have been taken against me
I am not a bankrupt
Date: …………………………………… …………………………………….
(Signature)
Completed application form and payment should be sent to:-
The Monitoring Committee
ASEAN Chartered Professional Engineer Register
c/o Board of Engineers Malaysia
17th
Floor JKR HQ Building
Jalan Sultan Salahuddin
50580 Kuala Lumpur
Tel.: 03-26912090
____________________________________________________________________________________
**tick where applicable
4
ARTICLE 3
RECOGNITION, QUALIFICATIONS, AND ELIGIBILITY
3.1 Qualifications to Become an ASEAN Chartered Professional Engineer (ACPE)
A Professional Engineer who possesses the following qualifications:
3.1.1 completed an accredited engineering degree recognised by the professional engineering
accreditation body whether in the Country of Origin or Host Country or assessed and
recognised as having the equivalent of such a degree;
3.1.2 possess a current and valid professional registration or licensing certificate to practice
engineering in the Country of Origin issued either by the Professional Regulatory Authority
(PRA) of the ASEAN Member Countries and in accordance with its policy on
registration/licensing/certification of the practice of engineering or the Monitoring
Committee pursuant to Article 4.2.2 and item 1.2 of Appendix II of this Arrangement;
3.1.3 acquired practical and diversified experience of not less than seven (7) years after
graduation, at least two (2) years of which shall be in responsible charge of significant
engineering work as stipulated in Appendix IV, D - Example IV;
3.1.4 in compliance with Continuing Professional Development (CPD) policy of the Country of
Origin at a satisfactory level; and
3.1.5 obtained certification from the Professional Regulatory Authority (PRA) of the Country of
Origin with no record of serious violation on technical, professional or ethical standards,
local and international, for the practice of engineering.
is eligible to apply to the ASEAN Chartered Professional Engineer Coordinating Committee
(ACPECC) to be registered as an ASEAN Chartered Professional Engineer (ACPE) under the
ASEAN Chartered Professional Engineers Register (ACPER).
3.2 ASEAN Chartered Professional Engineer (ACPE)
A Professional Engineer who possesses the above qualifications and complies with the Guidelines
on Criteria and Procedures as per Appendix II and satisfies the Assessment Statement as per
Appendix III, may, upon acceptance and payment of fees, be emplaced on the ASEAN Chartered
Professional Engineers Register (ACPER) and accorded the title of ASEAN Chartered Professional
Engineer (ACPE). An ASEAN Chartered Professional Engineer (ACPE) shall practice engineering
only in the specific discipline or disciplines in which he/she has been adjudged to be competent
under this Arrangement.
3.3 Eligibility of an ASEAN Chartered Professional Engineer (ACPE) to Practice in a Host Country
3.3.1 An ASEAN Chartered Professional Engineer (ACPE) shall be eligible to apply to the
Professional Regulatory Authority (PRA) of a Host Country to be registered as a Registered
Foreign Professional Engineer (RFPE). The applicant shall submit with his application a
sworn undertaking to:
(a) be bound by local and international codes of professional conduct in accordance
with the policy on ethics and conduct established and enforced by the Country of
Origin;
5
(b) be bound by prevailing laws and regulations of the Host Country; and
(c) work in collaboration with local Professional Engineers in the Host Country
subject to domestic laws and regulations of the Host Country governing the
practice of engineering thereto.
3.3.2 Upon approval, the successful ASEAN Chartered Professional Engineer (ACPE) applicant
shall, subject to domestic laws and regulations and where applicable, not making
submissions to statutory authorities of the Host Country, be permitted to work as a
Registered Foreign Professional Engineer (RFPE), not in independent practice, but in
collaboration with designated Professional Engineers in the Host Country, within such area
of his own competency as may be recognised and approved by the Professional Regulatory
Authority (PRA) of the Host Country.
(the full version of the MRA on Engineering Services may be viewed in the website ASEAN/MITI)