for sale as a going concernbandresaws with infeed lift tilt hoist. outfeed power rollers with side...

6
www.screetons.co.uk 25 Bridgegate Howden East Yorkshire DN14 7AA Tel: 01430 431201 Fax: 01430 432114 E-mail: [email protected] Offices also at Goole & Snaith This prime business is situated on Breighton Airfield approximately six miles from the market town of Howden and access to the motorway network at J37 and approximately ten miles from the town of Selby and eighteen miles from the city of York. The site comprises a substantial modern industrial building with a comprehensive range of woodworking machinery, a recently constructed office block, concrete and hard core hardstanding and bare land, the whole extending to approximately 2.75 acres. £1,500,000 To include the Premises, Equipment & Goodwill FOR SALE AS A GOING CONCERN Contract Sawmills, Breighton Airfield, Bubwith, YO8 6DJ.

Upload: others

Post on 20-Mar-2020

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: FOR SALE AS A GOING CONCERNBandresaws with Infeed Lift Tilt Hoist. Outfeed power rollers with side ejectors. 2 x 3000 mm sets of 5 cross chains. Integrated fairending rollers. Manual

www.screetons.co.uk

25 Bridgegate Howden East Yorkshire DN14 7AA

Tel: 01430 431201 Fax: 01430 432114 E-mail: [email protected] Offices also at Goole & Snaith

This prime business is situated on Breighton Airfield approximately six miles from the market town of Howden and access to the motorway network at J37 and approximately ten miles from the town of Selby and eighteen miles from the city of York. The site comprises a substantial modern industrial

building with a comprehensive range of woodworking machinery, a recently constructed office block, concrete and hard core hardstanding and bare land, the whole

extending to approximately 2.75 acres.

£1,500,000To include the Premises, Equipment & Goodwill

FOR SALE AS A GOING CONCERN Contract Sawmills, Breighton Airfield, Bubwith, YO8 6DJ.

Page 2: FOR SALE AS A GOING CONCERNBandresaws with Infeed Lift Tilt Hoist. Outfeed power rollers with side ejectors. 2 x 3000 mm sets of 5 cross chains. Integrated fairending rollers. Manual

Description An industrial site extending to approximately 2.75 acres and comprising;

OFFICE BLOCK Constructed of red facing brick beneath a concrete interlocking tiled roof and having underfloor heating throughout.

Divided into;

GROUND FLOOR

• Entrance (14’10” x 3’10”) (4.55m x 1.2m) plus (3’8” x 4’6”) (1.15m x 1.4m) Concealed stairway to the first floor.

• Ladies & Gents Toilets

• Kitchen (11’ x 9’6”) (3.35m x 2.9m) Having a range of modern fitted units.

• Office One (17’ x 24’) (5.2m x 7.35m) Less (3’6” x 13’) (1.05m x 4m)

• Office Two (15’8” x 14’6”) (4.8m x 4.45m)

FIRST FLOOR

• Boardroom (17’ x 34’) (5.2m x 10.5m) Cupboard containing the water tank and access to the roof space.

• W.C

INDUSTRIAL BUILDINGS

• Industrial Building (85’ x 120’) (25.9m x 36.57m) plus (25’ x 32’) (7.65m x 9.75m) Steel framed building having a concrete floor throughout, insulated walls and roof and high pressure sodium lights. Three phase electricity supply.

Page 3: FOR SALE AS A GOING CONCERNBandresaws with Infeed Lift Tilt Hoist. Outfeed power rollers with side ejectors. 2 x 3000 mm sets of 5 cross chains. Integrated fairending rollers. Manual

• Lean – to (80’ x 15’) (24.38m x 4.6m) To the west elevation. Brick built building having a concrete floor throughout and an insulated roof and divided into; tool room, toilets, staff room, store and compressor room.

• Yard/Open Storage The yard area is partly covered in concrete and partly hardcore.

• Bare Land Situated to the south of the industrial building.

GENERAL INFORMATION

• The Business Further information including turnover etc. is available upon request.

• Viewing As agents for the Vendors of this site may we request that all viewing appointments are made strictly via our office.

• Tenure It is understood that the tenure of the site is freehold. We have not inspected the deeds and have had to assume for the purpose of these particulars that the deeds do not contain any onerous or restrictive covenants, which would affect the sale of the property.

• Further Planning Requirements Prospective purchasers are advised to contact the local authority to discuss any further planning requirements. East Riding of Yorkshire Council Development Control Division County Hall Beverley East Yorkshire HU17 9BA Tel: 01482 393891

• Wayleaves, Easements & Rights of Way The site is sold subject to and with the benefit of all existing rights of way, water, light, drainage and all other easements affecting the land whether mentioned in these particulars or not together with all wayleaves for poles, stays, cables, pylons, water, gas and other pipes.

• Plans and Particulars The plans and particulars and advertisements in connection with this sale have been prepared in good faith for the benefit of intending purchasers. Neither the vendor nor his Agent accept any liability for their accuracy whatsoever. All plans are for identification purposes only, are not to scale and have been reproduced with the sanction of HMSO under licence No. ES780065. Crown copyright reserved.

• Services Prospective purchasers can make the relevant enquiries from the following utility companies with regard to the services available. Yorkshire Water Services (New Supplies & Enquiries), Broadacre House, Vicar Lane, Bradford, West Yorkshire, BD1 5RQ Yorkshire Electricity – New Supplies, Supply Line (YorkshireElectric) PO Box 161, 161 Gelderd Road, Leeds, LS1 1QZ British Gas (North Eastern) Vicarage Street North, Wakefield, West Yorkshire, WF1 4JU.

Page 4: FOR SALE AS A GOING CONCERNBandresaws with Infeed Lift Tilt Hoist. Outfeed power rollers with side ejectors. 2 x 3000 mm sets of 5 cross chains. Integrated fairending rollers. Manual

MACHINERY LIST

Machine Type/Model

Weinig Hydromat 23, 6 Head Moulder. 60 m/min. Outboard bearings, Straight & Profile Jointers, 50 mm spindles & 6000 r.p.m. 230 wide x 120 high. Heavy Duty Floor rollers to the infeed. Heavy Duty Floor rollers at the outfeed & outfeed collect station. Manual feed and stack. Sound & Safety enclosure.

No. 4 Hydromat 23 6 Head Yr. 2003. 1st bottom Straight, Right & Left Straight & Stab, 1st top Straight, 2nd Top Stab, 2nd Bottom Stab jointers

Elevated In line Tandem Robinson 48" Bandresaws with Infeed Lift Tilt Hoist. Outfeed power rollers with side ejectors. 2 x 3000 mm sets of 5 cross chains. Integrated fairending rollers. Manual stack to Scissor Lift table to Heavy Duty Floor rollers to outfeed collect station. Timber Sound enclosure.

Twin 48" Bandresaw Line

Single Stenner 36" VHM Bandresaw over pit with Heavy Duty Floor rollers at the infeed & outfeed. Manual feed and take off. Timber Sound enclosure

Stenner 36" VHM Resaw

Weinig Hydromat 22AL 6 Head Moulder 60 m/min with Outboard bearings & jointers. 50 mm spindles, 6000 rpm. 230 wide x 120 high. Safety hoods and timber outer enclosure. Heavy Duty Floor rollers. Weinig E1 Infeed handling. Heavy Duty Floor rollers to the outfeed.

No. 3 Hydromat 22AL 6 head moulder 1986 - 222-756 1st bottom, Right, Left, 1st top Straight jointers, 2nd top, 2nd bottom Profile jointers

Gau-jing Hydromat 7 Head Moulder 100 m/min with Heavy Duty Feed Rollers throughout. Outboard bearings & jointers. 50 mm spindles, 6000 rpm. 230 wide x 120 high. Safety hood. Heavy Duty Floor rollers. Cross chain infeed. Automatic cross feed stacker with lift table and rollers. Onto Heavy Duty Floor rollers. Into Strapper

No. 2 Moulder Gau-jing Typhoon GA-623HCE Yr. 2013. 1st bottom straight, right & left straight & stab, 1st top straight, 2nd bottom none, 2nd top straight & stab, 3rd bottom straight & stab.

Weinig Hytdromat 23 , 7 Head Moulder 48 m/min Outboard bearings, Straight & profile jointers, 50 mm spindles & 6000 r.p.m. 230 wide x 120 hight. Safety Hood. Heavy Duty Floor rollers at the infeed and outfeed areas.

No. 1 Moulder Hydromat 23 7 Head Yr. 1997. 1st bottom Straight, Right & Left Stab, 1st top Straight, 2nd bottom, None, 2nd Top Stab, 3rd Bottom Stab.

New Tilt Hoist destacker Yr. 2014. 4 arms to 6000 mm length

Rebuilt Bale Pak with saw dust seperator Wood shavings bale plant with carosell type saw dust seperator

3 off Cyclone type extractor systems

Page 5: FOR SALE AS A GOING CONCERNBandresaws with Infeed Lift Tilt Hoist. Outfeed power rollers with side ejectors. 2 x 3000 mm sets of 5 cross chains. Integrated fairending rollers. Manual

MACHINERY LIST CONTINUED

Machine Dimter S50 Automatic Cross Cut Saw with Optimising, 6.3 m infeed, 4.8 m outfeed

Type/Model Dimter S50 Cross Cut

Wadkin GA Adapted moulder for horizontal splitting Wadkin GA

Weinig H22 BL Multi head moulder Hydromat 22 moulder Yr 1981

Chisel mortiser Single head chisel mortiser

Wadkin Rip Saw Wadkin Rip Saw AGS

Wadkin Bursgreen Radial Arm Cross Cut Saw BRA Cross Cut

Interwood Pin Router Pin Router

Chop Saw Chop Saw

Chop Saw Chop Saw

De-Walt Radial Arm Cross Cut Saw De-Walt Cross Cut

Wilson FT Spindle moulder with Slide Table Wilson Spindle moulder

Power Feed Unit Power Feed

Wadkin MZF Narrow Bandsaw Wadkin MZF Narrow Bandsaw

2 off Air Compressors Thomas Wright Compressors

Wilson FQ spindle moulder Wilson FQ spindle

Profile sander LS-1NT ttLasIII model LS-1NT

Radio Frequency Flat bed Press RF Machinery Press

Mini Max Table Pad Sander Mini Max pad sander L55

2 off Bench Pillar Drills Bench Pillar Drills

Floor standing Pillar Drill Floor Pillar Drill

Single Bag Extractor Single Bag Extractor

Metabo Chop Saw with timber benches and stops

Metabo Chop Saw

5 off H & M Services Heavy Duty floor rollers

H & M Floor Rollers

Weinig OMA Tool Measuring Stand Weinig OMA setting stand

Cincinnati Tool Grinder Cincinnati tool & cutter grinder

Long Arm De-Walt Radial Arm Cross Cut Saw

De-Walt Cross Cut

Dust Extraction Filter System connected to Waste Trailer at the small bottom workshop

Aagaard I/S Dust Extraction AGF 2 Yr 1999

Tool Room Equipment

Wadkin Automatic Straight knife Grinder Wadkin NZ300 Auto Straight Knive Grinder

Wadkin Profile Grinder Wadkin NV300 Profile Grinder

Wadkin Tool Setting Stand Wadkin FDT tool setting stand

Ultrasonic tool cleaning tank Ultra Sonic cleaner

Wadkin NH tool grinder with Dividing head for on the block and bollinder grinding

Wadkin NH Universal Tool Grinder

Various Band Resaw Blades Band Resaw Blades

Various Hydro Serrated Tool Cutter blocks

130 approx

Various Bollinders 16 sets

Various saw sleeves & blades

Various tool stands

Various Serrated Shaped cutter knives

Page 6: FOR SALE AS A GOING CONCERNBandresaws with Infeed Lift Tilt Hoist. Outfeed power rollers with side ejectors. 2 x 3000 mm sets of 5 cross chains. Integrated fairending rollers. Manual

IMPORTANT NOTES

These particulars have been prepared in all good faith to give a fair and overall view of the property and must not be relied upon as statements or representations of fact. Purchasers must satisfy themselves by inspection or otherwise regarding the items mentioned and as to the content of these particulars and make further specific enquiries to ensure that the descriptions are likely to match any expectations they may have of the property. We have not tested any services, appliances, facilities or equipment and nothing in these particulars should be deemed to be a statement that they are in good working order or that the property is in good structural condition or otherwise. Photographs depict only certain parts of the property. It should not be assumed that any contents, furniture, furnishings, fixtures and fittings etc. photographed, are included in the sale. It should not be assumed that the property remains as displayed in the photographs. No assumption should be made with regard to parts of the property that have not been photographed. Any areas, measurements or distances referred are given as a guide only and not precise. If such details are fundamental to a purchase, purchasers must rely on their own enquiries. Where reference is made to planning permissions of potential uses such information is given by the agents in good faith. Purchasers should make their own enquiries into such matters prior to purchase.

S105 Printed by Ravensworth 01670 713330