follow these steps to install paving blocks
DESCRIPTION
Interlocked paving block are elegant and they beautify your garden, lawn area, read the complete guide on how to install paving blocks easily like a professionals.TRANSCRIPT
A Complete Guide On
How To Install Interlock Paving Blocks
Why you should prefer Paving Block ?
These pavers are very helpful for adding an elegant look to a patio, walkway or driveway. High flexibility, hasslefree repairing & maintenance and high tensile strength are some important features of interlocking paver blocks that make them highly demanded in the market.
Tools You Required for Installation
Use of shovels, grading rake, wheel barrow and picks for preparing demo and base are:-
● Vibrating plate compactor
● Use of 2x4 wood and 1 inch pipe for screening sand
● Rubber mallet for adjusting interlocking pavers
● Use of splitter or masonry saw for trimming
● Use of broom for sweeping sand
Things to keep in mind
Use of a proper base material is must even if underlying subgrade is highly suitable. After installing and levelling of sand bedding, do not disturb laying of pavers. For proper drainage, it is a must to adjust grade
If you are planning to purchase the finest quality range of paver blocks in Delhi for your home and garden, then always approach the reckoned manufacturer and dealer to fulfil your desire with ease.
They are available in varying shapes, textures and vibrant colors. Nowadays, they are employed for various purposes. Paving block manufacturers are consistently increasing in the market after considering the high demand of these blocks.
So, Let's Start the Work!
Preparing base and levelling pathFirst steps used for the installation of interlocking pavers is to prepare the base and start levelling the path. Start digging around the edge of the subbase. Always use a spirit level for positioning the pavers.
Sand BeddingSecond step involved in this installation process is sand bedding. In fact, sand bedding is very helpful for providing leveling properties and securing the paver units. In order to experience better paving, it is must to use clean and sharp concrete sand up to 1 inch deep for the sand bedding.
Use stable edge restraintThird step included in the installation of interlocking paver blocks is to use a stable edge restraint. It can be a hard edge or concrete restraint.
Use of vibrating plate compactor for lockup
After laying the pavers, it is must to use vibrating plate compactor for lockup. Use this compactor only one time after spreading a light layer of sand. Vibrating plate compactor helps to set the pavers in an easy manner.
Filling the Paver jointsThe next step included in this process is sanding the pavers for filling the paver joints. This process ensures final lockup and helps to fill the voids.
If you are looking for topnotch quality paving blocks at the market leading prices, then contact highly esteemed and trusted interlocking paver block dealers.
Thank You!!
For Inquiry
Registered office
J-107, Kirti Nagar, New Delhi-110015
Administrative office
CB-163, Ground Floor, Ring Road, Naraina,New Delhi-110028.
Website :- http://paversindia.com/