fly software installation guide

BRAM FLY REV. 1.3.2 – INSTALLATION GUIDE SYSTEM REQUIREMENTS Minimun requirements: _ Microsoft Windows XP SP3 or better (32 o 64 bit); _ Microsoft dotnet framework 3.5 SP1 or better; _ intel atom or amd sempron processor; _ 512 MB RAM; _ USB 2.0. door INSTALLATION PROCEDURE 1. FRAMEWORK INSTALLATION This program needs the presence of Micrososft dotnet framework 3.5 SP1, that have to be installed if not present on your PC: you can check if it is present on CONTROL PANEL – INSTALLED PROGRAM. If necessary you’ll find the required file on the “FRAMEWORK” folder: simply run dotnetfx35.exe and follow the instructions. Furthermore, Microsoft recomends to install KB959209, and for 64 bit OS to install KB967190 too. Those files are present on the “FRAMEWORK” folder, divided by OS (“XP”, “VISTA”, the last one is good for WINDOWS 7 too), and by architecture (“32_BIT”, “64_BIT”). Once you have indentified the correct file (and architecture), simply run it and follow the instructions. 2. USB PROGRAM DRIVERS INSTALLATION. In order to be able to access the data contained in the MicroSD it is necessary to install the drivers, found on the “DRIVER” folder: simply run CDM20814_Setup.exe and follow the instructions. NOTICE: some OS may ask for the User to run those files as Administrator; if such a case happens simply right click on the file / “run as administrator”. 3. FLY PROGRAM INSTALLATION It is only needed to copy and paste the “BRAM” folder on your PC. From now on the program is ready to be used.

Upload: lucian

Post on 30-Sep-2015

226 views

Category:

Documents

4 download

Report

Download

Embed Size (px):

DESCRIPTION

descriere soft

TRANSCRIPT

BRAM FLY REV. 1.3.2 INSTALLATION GUIDE

SYSTEM REQUIREMENTS

Minimun requirements: _ Microsoft Windows XP SP3 or better (32 o 64 bit); _ Microsoft dotnet framework 3.5 SP1 or better; _ intel atom or amd sempron processor; _ 512 MB RAM; _ USB 2.0. door

INSTALLATION PROCEDURE

1. FRAMEWORK INSTALLATION This program needs the presence of Micrososft dotnet framework 3.5 SP1, that have to be installed if not present on your PC: you can check if it is present on CONTROL PANEL INSTALLED PROGRAM. If necessary youll find the required file on the FRAMEWORK folder: simply run dotnetfx35.exe and follow the instructions. Furthermore, Microsoft recomends to install KB959209, and for 64 bit OS to install KB967190 too. Those files are present on the FRAMEWORK folder, divided by OS (XP, VISTA, the last one is good for WINDOWS 7 too), and by architecture (32_BIT, 64_BIT). Once you have indentified the correct file (and architecture), simply run it and follow the instructions.

2. USB PROGRAM DRIVERS INSTALLATION.

In order to be able to access the data contained in the MicroSD it is necessary to install the drivers, found on the DRIVER folder: simply run CDM20814_Setup.exe and follow the instructions.

NOTICE: some OS may ask for the User to run those files as Administrator; if such a case happens simply right click on the file / run as administrator.

3. FLY PROGRAM INSTALLATION It is only needed to copy and paste the BRAM folder on your PC.

From now on the program is ready to be used.