fibre cable fibre patch leads fibre ...minitran.co.uk 124 cut to length fibre cable nylon armoured...

Head Office: T: 01279 757775 • F: 01279 653535 Scotland: T: 01383 435985 • F: 01383 435993121

FIBRE CABLE

Belden & Draka Cable 122

Miniflex Cable 123

Nylon Armoured Belden cable 124

FIBRE PATCH LEADS

Fibre Patch Leads 125 - 127

Fibre Pre-Termination Service 127

Fibre Pig Tails 128

FIBRE COnnECTORS

TE Lightcrimp+ Connectors & Kit 129

TE Corelink Splice 129

Belden Brilliance Connectors 130

Panduit Opticam Connectors 131

COuPLERS, PAnELS, ACCESSORIES & EnCLOSuRES

Panel mount couplers 132 - 133

Fibre Panels 134

Spools, Splice Holders, Protectors & Glands 135

Fibre Enclosures & Splice Boxes 136

MPT PRE-TERMInATED SySTEM

MTP cassettes 137

MTP Fan Outs & Trunk Cable Assemblies 138

MTP Panels 139

TOOLIng, KITS & COnSuMABLES

Strippers, Shears & Slitters 140

Cleavers & Scribe Tool 140

Fibre Kits 141

Consumables 142 - 145

TESTERS

OTDR & Fibre Loss Kits 146 - 147

Visual Inspection System 148

Fusion Splicer 149

Network Analysers 150

[email protected] www.minitran.co.uk

FIBRE CABLE

For internal/external campus/building backbone (riser) &/or horizontal cabling applications. Can be used for linking 2 buildings externally via a duct (not suitable for direct burial). Cable is LSOH & watertight. Gel filled on loose tube. Predicted lifetime 30 years.

Draka fibre cable uses patented 'BendBright' technology for improved bending performance compared to other fibre cable without any sacrifice or trade-off on bandwidth or other performance.

Black Tight Buffered Orange Loose Tube

Fibre cable Belden P/no Draka P/no Belden P/no Draka P/no

4 core LSOH GUMT504 1026279 GUSN504 1017435



16 core LSOH GUMT516 N/A GUSN516 N/A





16 core LSOH GUMT316 1022506 GUSN316 N/A




12 core LSOH GUMT612 1022510 GUSN612 1022246 (Blue)


24 core LSOH GUMT624 1022512 GUSN624 1022247 (Blue)

4 core LSOH GUMT804 1018910-BLK GUSN804 1016956



16 core LSOH GUMT816 1021653-BLK GUSN816 N/A


Cut to length

OM2 50/125

Multimode

OM3 50/125

Multimode

OM4 50/125

Multimode

OS1/2 9/125

Singlemode

Tight buffered ideal for use with Lightcrimp, Belden Brilliance & epoxy connectors. Loose tube with Lightcrimp & epoxy connectors only (pages 128-131)

Cable type and maximum distance

Application Wavelength Data Rate OM1 OM2 OM3 OM4 OS1 OS2

100BASE-FX 1300nm 100Mbps 2000Mtrs 2000Mtrs 2000Mtrs 2000Mtrs - -

100BASE-LX10 1310nm 100Mbps - - - - 10Km 10Km

1000BASE-SX 850nm 1Gbps 275Mtrs 550Mtrs 800Mtrs 800Mtrs - -

1000BASE-LX 1310nm 1Gbps 550Mtrs 550Mtr 550Mtr 550Mtr 5000Mtrs 5000Mtrs

10GBASE-SR 850nm 10Gbps 33Mtrs 82Mtrs 300Mtrs 450Mtr - -

10GBASE-LX 1310nm 10Gbps - - - - 10Km 10Km

10GBASE-LX4 1310nm 10Gbps 300Mtr 300Mtr 300Mtr 300Mtr 10Km 10Km

40GBASE-SR4 850nm 40Gbps - - 100Mtrs 125Mtrs - -

40GBASE-LR4 1310nm 40Gbps - - - - 10Km 10Km

100GBASE-SR10 850nm 100Gbps - - 100Mtrs 125Mtrs 10Km 10Km

Tight Buffered & Loose Tube Fibre Cable


FIBRE CABLE

Miniflex cable is designed, developed & manufactured in the UK by M2FX. Its loose tube "hinged" sheath construction is unique & has an extremely small overall diameter of 3mm for 12 cores or less and 5mm for 24 cores. It is armoured up to 1400N/ 350 lbf which is approximately ten times the performance of standard armoured cable. It is also extremely flexible and light weight.

Minilex TuffDuct and Catenary duct are suitable for copper & fibre cables in a direct burial or catenary wire application. Designed for routing cables where there is a need for UV resistance (External use), both have low friction lining to allow cables to be pushed through easily.

Miniflex Lightweight Armoured Fibre Cable

Miniflex TuffDuct & Catenary Duct

Orange PE 6mm Inner Dia Tuffduct OFTD-P-10-6-PE-ORG

Black Aerial 6mm Inner Dia Catenary OFAM-P-8-5.5-PE-BLK

• Half the diameter of other products (24 core only 5mm OD)

• Lightweight armoured jacket (24 core weighs only 13.6Kg/Km)

• Tough, ultra flexible & kink resistant • Up to 10x the crush resistance of other products• Ideal for main equipment rooms, data centres,

ducting & catenary applications.

OM3 & OS2 Multicore Cables

Black-PBT & White PA LSOH are standard. Other colours available to order, minimum 2K runs.

Colour: See below leftMaterial: PB= (Polybutylene terephthalate) PA= (Polyamide LSOH) PE= (Polyethylene)No of Cores & Cable Type: 043= 4 Core OM3 133= 8 Core OM3 493= 12 Core OM3 195= 24 Core OM3 323= 4 Core OS2 073= 8 Core OS2 033= 12 Core OS2 245= 24 Core OS2

TnCA-XXX_XX_XXX

Less Space + Less Risk

+ Faster Installation = COST SAVINGS

Patented grooves increase flexibility & strength

Cut to length


Cut to length

FIBRE CABLE

Nylon armoured "Loose Tube" fibre cable is an excellent alternative to metallic armoured CST types. The Important difference is that the nylon armoured version does not have a reel memory problem, allowing for easy installation when pulling in longer lengths. This cable is constructed with an orange LSOH outer jacket with increased swellable yarns as strength members with much improved rodent protection. This cable is also good for direct burial as well as duct applications.

Specification: Bend radius 25mm or Static 15 x dia. or Dynamic 20x dia. Crush resistance 15000 N/m. Direct burial lees/equal to 150N/Cm

nylon Armoured Loose Tube Fibre Fibre cable Belden P/no

8 core orange LSOH GURB208

OM2 50/125 12 core orange LSOH GURB212

Multimode 16 core orange LSOH GURB216











OS1/2 9/125 12 core orange LSOH GURB812

Singlemode 16 core orange LSOH GURB816


Cut to length

OM2 50/125

Multimode

OM3 50/125

Multimode

OM4 50/125

Multimode

OS1/2 9/125

Singlemode

Ideal for use with Lightcrimp and epoxy style connectors only. See pages 129 & 132

Cable type and maximum distance

Application Wavelength Data Rate OM1 OM2 OM3 OM4 OS1 OS2

100BASE-FX 1300nm 100Mbps 2000Mtrs 2000Mtrs 2000Mtrs 2000Mtrs - -

100BASE-LX10 1310nm 100Mbps - - - - 10Km 10Km

1000BASE-SX 850nm 1Gbps 275Mtrs 550Mtrs 800Mtrs 800Mtrs - -

1000BASE-LX 1310nm 1Gbps 550Mtrs 550Mtr 550Mtr 550Mtr 5000Mtrs 5000Mtrs

10GBASE-SR 850nm 10Gbps 33Mtrs 82Mtrs 300Mtrs 450Mtr - -

10GBASE-LX 1310nm 10Gbps - - - - 10Km 10Km

10GBASE-LX4 1310nm 10Gbps 300Mtr 300Mtr 300Mtr 300Mtr 10Km 10Km

40GBASE-SR4 850nm 40Gbps - - 100Mtrs 125Mtrs - -

40GBASE-LR4 1310nm 40Gbps - - - - 10Km 10Km

100GBASE-SR10 850nm 100Gbps - - 100Mtrs 125Mtrs 10Km 10Km

Temperature range: Transport: -30 to 70 deg C Installation: -5 to 50 deg C

nylon Armoured Fibre Cable


FIBRE PATCH LEADS

ST to ST Twin Zip Duplex

ST to LC Twin Zip Duplex

ST to SC Twin Zip Duplex

SC to SC Twin Zip Duplex

0.5Mtr FPC-STD005C-*

1.0Mtr FPC-STD01C-*

2.0Mtr FPC-STD02C-*

3.0Mtr FPC-STD03C-*

5.0Mtr FPC-STD05C-*

10Mtr FPC-STD10C-*

15Mtr FPC-STD15C-*

20Mtr FPC-STD20C-*

25Mtr FPC-STD25C-*

0.5Mtr FPC-STLC005-*

1.0Mtr FPC-STLC01-*

2.0Mtr FPC-STLC02-*

3.0Mtr FPC-STLC03-*

5.0Mtr FPC-STLC05-*

10Mtr FPC-STLC10-*

15Mtr FPC-STLC15-*

20Mtr FPC-STLC20-*

25Mtr FPC-STLC25-*

0.5Mtr FPC-SCST005DC-*





10Mtr FPC-SCST10DC-*




0.5Mtr FPC-SC005DC-*

1.0Mtr FPC-SC01DC-*

2.0Mtr FPC-SC02DC-*

3.0Mtr FPC-SC03DC-*

5.0Mtr FPC-SC05DC-*

10Mtr FPC-SC10DC-*

15Mtr FPC-SC15DC-*

20Mtr FPC-SC20DC-*

25Mtr FPC-SC25DC-*

• Tested & supplied with test results. • Multimode & singlemode options. • Variety of LSOH jacket colours. • Twin zip duplex 3mm cables as std.

• Meets/exceeds TIA/EIA-568-B.3. • Flat Ruggerdised, armoured & non std lengths

made to order.• APC (Angled Polish Connectors) made to order.

* For all the above leads replace suffix with: No suffix = OM1 62.5/125 Yellow 50 = OM2 50/125 Orange 53 = OM3 50/125 Aqua or Violet 54 = OM4 50/125 Magenta S = OS1/2 9/125 Duplex Yellow SS = OS1/2 9/125 Simplex Yellow

For Flat Ruggerdised Cable add applicable suffix (left) followed by FFor Armoured Ruggerdised Cable add applicable suffix (left) followed by A

ST SC LC

TM


FIBRE PATCH LEADS

SC to LC Twin Zip Duplex

ST to FC Twin Zip Duplex(OS1/2 9/125 Singlemode Only)

SC to FC Twin Zip Duplex(OS1/2 9/125 Singlemode Only)

LC to LC Twin Zip Duplex

0.5Mtr FPC-SCLC005-*

1.0Mtr FPC-SCLC01-*

2.0Mtr FPC-SCLC02-*

3.0Mtr FPC-SCLC03-*

5.0Mtr FPC-SCLC05-*

10Mtr FPC-SCLC10-*

15Mtr FPC-SCLC15-*

20Mtr FPC-SCLC20-*

25Mtr FPC-SCLC25-*

0.5Mtr FPC-STFC005S-*





10Mtr FPC-STFC10S-*

15Mtr FPC-STFC15S-*

20Mtr FPC-STFC20S-*

25Mtr FPC-STFC25S-*

0.5Mtr FPC-LC005-*

1.0Mtr FPC-LC01-*

2.0Mtr FPC-LC02-*

3.0Mtr FPC-LC03-*

5.0Mtr FPC-LC05-*

10Mtr FPC-LC10-*

15Mtr FPC-LC15-*

20Mtr FPC-LC20-*

25Mtr FPC-LC25-*

0.5Mtr FPC-SCFC005S-*





10Mtr FPC-SCFC10S-*

15Mtr FPC-SCFC15S-*

20Mtr FPC-SCFC20S-*

25Mtr FPC-SCFC25S-*

* For all the above leads replace suffix with: No suffix = OM1 62.5/125 Yellow 50 = OM2 50/125 Orange 53 = OM3 50/125 Aqua or Violet 54 = OM4 50/125 Magenta S = OS1/2 9/125 Duplex Yellow SS = OS1/2 9/125 Simplex Yellow

* For ST to FC & SC replace suffix with: F = Flat Ruggerdised CableA= Armoured Ruggerdised Cable

For Flat Ruggerdised Cable add applicable suffix (left) followed by FFor Armoured Ruggerdised Cable add applicable suffix (left) followed by A

TM

STSC FCLC


Minitran offer a fibre pre-termination service for both TB (Tight Buffered) and LT (Loose Tube) fibre cables. Simply decide on the cable & connector type together with optional pulling boot (advisable). Normal turn around time approx 3 days. Pre-tested supplied ready to install.

Part Number Matrix

Mini5 Fibre Pre-Termination Service

FIBRE PATCH LEADS & PRE-TERMInATED FIBRE CABLE

LC to FC Twin Zip Duplex(OS1/2 9/125 Singlemode Only)

FC to FC Twin Zip Duplex(OS1/2 9/125 Singlemode Only)

0.5Mtr Yellow FPC-FCLC005S-*





10Mtr Yellow FPC-FCLC10S-*




0.5Mtr Yellow FPC-FC005S-*





10Mtr Yellow FPC-FC10S-*




* Replace suffix with: F = Flat Ruggerdised CableA= Armoured Ruggerdised Cable

FPC-LC04100-50-L

TM

TM

LC FC

A= Nylon Armoured, L= Loose Tube, Blank = tight buffered 9 = OS1/2 9/125 Singlemode 50 = OM2 50/125 Multimode 53 = OM3 50/125 Multimode 54 = OM4 50/125 Multimode Length In Mtrs No of Fibre cores Connector Type: ST, SC, LC or FC


MInI5 FIBRE PIgTAILS

Mini5 pigtails are available from stock for the four popular connector types, ST, SC, LC and FC. Other types E2000, MTRJ, Panduit Optijack and APC style connectors can be made to order. The Mini5 product is manufactured with colour coded 900um cable to signify the cable type. Fully tested & supplied with test results. 1Mtr long pigtails as standard.

ST, SC, LC & FC Pigtails 900um 1Mtr

Fibre testers: pages 146-150

TM

LC SCST FC

OM3 ( 50/125) Aqua Easy Strip 900um Fibre cable

ST Connector FPC-STP01-53

SC Connector FPC-SCP01-53

LC Connector FPC-LCP01-53

OM4 ( 50/125) Magenta Easy Strip 900um Fibre cable




OS1/2 ( 9/125) yellow Easy Strip 900um Fibre cable

ST Connector FPC-STP01S

SC Connector FPC-SCP01S

LC Connector FPC-LCP01S

FC Connector FPC-FCP01S

OM1 ( 62.5/125) White Easy Strip 900um Fibre cable

ST Connector FPC-STP01

SC Connector FPC-SCP01

LC Connector FPC-LCP01

OM2 ( 50/125) Orange Easy Strip 900um Fibre cable





LIgHTCRIMP PLuS & CORELInK SySTEMS

Lightctimp connectors are factory polished, all you have to do is strip the cable, prepare and cleave the fibre and then crimp the connector.

Kits include handtools, high precision cleave tool, termination instructions & instructional CD-Rom.

These high performance mechanical splices are quick and easy to use and are re-usable.Each pack contains 12 splices and locking keys.

Lightcrimp+ SC & LC Kit 1754845-1

Lightcrimp + ST/SC/LC Kit 1754739-1

S/mode & M/mode Corelink Splice 503577-1

Corelink Workstation 503605-1

OM1 62.5/125 Cable *250um/900um & 3mm Cable Types

ST Simplex OM1* 5492642-1

SC Simplex OM1* 5492643-1

LC Simplex OM1* 6754483-1

OM2 50/125 Cable

ST OM2 Simplex 6278082-1

SC OM2 Simplex 6278079-2

LC OM2 Simplex * 6754483-2

OM3 50/125 Cable

ST Simplex 6278082-2

SC Simplex 6588291-2

LC Simplex * 6754483-4

OS1 9/125 cable type

ST Simplex 1828953-3

SC Simplex 6693276-1

LC Simplex 6754482-1

Lightcrimp Plus Termination Kit

Corelink Mechanical Splices

Lightcrimp Plus Connectors

Splice holders (with adhesive backing)

6 Splice Holder 559066-1

12 Splice Holder 559087-1

Requires a precision cleaver (page 140).

*The LC is only suitable for 250um and 900um fibre types. The ST and SC connectors can be used on 250um/900um and 3mm jacketed fibre.


BELDEn BRILLIAnCE FIBRE COnnECTORS

A quick and simple method of fibre termination. Simply strip and cleave the fibre and insert it into the connector. A small toggle slide on the connector is then locked into position and your termination is complete. Release the toggle switch re-terminate the connector. Designed for use on 900um tight buffered fibre.

Once the tight-buffered fibre is prepared with a cleave tool, follow these 3 easy steps:Fool-proof termination in three simple steps... now that's Brilliance!

Features:• Super fast termination times• Reusable upto 5 Times• Low insertion loss typical 0.2dB • No proprietary tools required• 100% installation yield Guarantee

LC Connector ST Connector SC Connector

OM1 62.5/125 Simplex Beige AX104240-S1 - AX104244-S1

OM2 50/125 Simplex Black AX104241-S1 AX104249-S1 AX104245-S1

OM3/4 50/125 Simplex Aqua AX104242-S1 AX104250-S1 AX104246-S1

OS2 9/125 Simplex Blue AX104243-S1 AX104251-S1 AX104247-S1

Basic Installation Kit (with installation guide, demo video, cleave marker & support handle) AX104268

Field Installation Kit (with installation guide, demo video, support handle & adaptors, stripper, tweezers, marker, wipes, scissors, waste bottle, glasses, visual fault locator, cleave inspection microscope, field cleaver) AX104270

Precision Installation Kit (includes all contents of the field kit but with a precision cleaver instead of the cleave inspection microscope & field cleaver) AX104271

Brilliance Connectors

Belden Brilliance Tool Kits

321 Insert fibre Activate tab Install boot

Basic tooling required to terminate Belden Brilliance1. Fibre stripping tool See Page 1402. Cleaning spray/cloth See Page 1443. Cleave tool See Page 1404. VFL laser fault finder See Page 143


OptiCam Pre-Polished Fibre Connectors & Kits

SC simplex 62.5/125 OM1 FSCMC6BLY

SC duplex 62.5/125 OM1 FSCDMC6BLY

SC simplex 50/125 OM2 FSCMC5BLY

SC duplex 50/125 OM2 FSCDMC5BLY

SC simplex 50/125 OM3 FSCMCXAQY

SC duplex 50/125 OM3 FSCDMCXAQY

SC simplex 9/125 OS1 FSCSCBUY

ST 62.5/125 OM1 FSTMC5BL

ST 50/125 OM2 FSTMC6EI

LC simplex 62.5/125 OM1 FLCSMC6BLY

LC duplex 62.5/125 OM1 FLCDMC6BLY

LC simplex 50/125 OM2 FLCSMC5BLY

LC duplex 50/125 OM2 FLCDMC5BLY

LC simplex 50/125 OM3 FLCSMCXAQY

LC duplex 50/125 OM3 FLCDMCXAQY

LC simplex 9/125 OS1 FLCSSCBUY

LC duplex 9/125 OS1 FLCDSCBUY

Fast termination eliminates field polishing & adhesive. For tight buffered cable only. • Terminate in less than half the time of field polish

connectors. • Re-termination capability • Easy to use tooling allows inspection of terminated

fibre for optimum results.

PAnDuIT FIBRE COnnECTORS

Field Polish Fibre Connectors

LC simplex multimode FLCSMEIY

LC simplex singlemode FLCSSBUY

Clip for connecting two LC simplex connectors FLCCLIP-L

LC duplex multimode FLCDMEIY

LC duplex singlemode FLCDSBUY

ST multimode FSTMABL

ST singlemode FSTSABU

SC simplex multimode FSCMBL

SC simplex singlemode FSC5BU

Clip for connecting two SC simplex connectors FSCCLIP-L

Field installable with anaerobic adhesive & polishing • ST & SC connectors for 900um tight buffered or

3mm jacketed cable.• LC simplex connectors for 900um tight buffered &

1.6 - 2mm jacketed cable• LC duplex connectors for 1.6 - 2mm jacketed cable

Fibre Stripper MT-CFS-2 page 140 Precision Cleaver MT-10010 page 140 Cleaning fluid MT-POC03M page 144Lint free wipes LINFW page 144

Fibre Consumables pages 140-145

Termination kit has everything needed to terminate Opticam connectors: Includes cable strippers, alcohol, screwdriver, safety glasses, tweezers, kevlar sheers, workmat, cleaver tool, termination tool, wipes, swabs & marker pen. All in a carry case. FCAMKIT

If you already have a fibre cable stripper, precision cleaver, cleaning fluid & lint free wipes then you only need to buy this upgrade kit part number which includes the termination tool. FPPKIT-CVY

Ethernet switches and converters with fibre ports: pages 184-185 & 188-189


EPOXy COnnECTORS & PAnEL MOunT COuPLERS

Mini5 Fibre panel mount couplers are available in multimode & singlemode variants for for OM1, OM2, OM3, OM4 and OS1/2. The SC & LC couplers have no need of fixing screws when used with the Mini5 double skin 19" panels (page 134).

Metallic barrel with serrated washer and locking nut. Phos/bronze ferrule for OM1/2, Ceramic for OM3, OS1/2.

Plastic body with metallic mounting clips. Phos/bronze ferrule for OM1/2, Ceramic for OM3/4, OS1/2.

Plastic body with metallic mounting clips. Phos/bronze ferrule for OM1/2, Ceramic for OM3/4, OS1/2.

Cable routing & cable protection products: pages 160-181

KVM: pages 193-199

Multimode OM1/2 FCST-APB

Single/Multimode OM3, OS1/2 FCST-APBS

Multimode OM1/2 Beige FCSC-SPBM

Single/Multimode OM3, OS1/2 Blue FCSC-SCSS

Multimode OM4 Aqua FCSC-SCS4

Singlemode OS1/2 APC Green FCSC-SAPC

Multimode OM1/2 Beige FCSC-DPBM

Single/Multimode OM3, OS1/2 Blue FCSC-DCSS

Multimode OM4 Aqua FCSC-DCS4

ST Couplers

SC Simplex Couplers

SC Duplex Couplers

TM

TM

TM

Dual fitting epoxy connectors suitable for both 900Micron and 2.8/3mm jacketed fibre cable. Glue & polish kits together with crimp tooling can be found on page ***, Black boots suitable for both cable types provided as standard.

Epoxy & Polish ConnectorsTM

ST Multimode + Boots MTFC-UMST

ST Singlemode + Boots MTFC-USST

SC Multimode + Boots MTFC-UMSC

SC Singlemode + Boots MTFC-USSC

LC Multimode + Boots MTFC-UMLC

LC Singlemode + Boots MTFC-USLC


Enclosures & accessories: pages 207-224

EPOXy COnnECTORS & PAnEL MOunT COuPLERS

Plastic body with metallic mounting clips. Pho/bronze ferrule for OM1/2, Ceramic for OM3/4, OS1/2.

Plastic body with metallic mounting clips. Pho/bronze ferrule for OM1/2, Ceramic for OM3/4, OS1/2.

LC Duplex keystone coupler OM1/2/3/4 & OS1/2 Fibre types, Black moulding for both multimode/singlemode types.

Multimode OM1/2 Beige FCLC-DPBM

Single/Multimode OM3, OS1/2 Blue FCLC-DCSS

Multimode OM4 Aqua FCLC-DCS4

Singlemode OS1/2 APC Green FCLC-DAPC

Multimode OM1/2 Beige FCLC-QPBM

Single/Multimode OM3, OS1/2 Blue FCLC-QCSS

Multimode OM4 Aqua FCLC-QCS4

Phos/Bronze OM1/2 FCLC-DPRJ

Ceramic OS1/2 OM3/4 FCLC-DCRJ

ST size blank FCST-BLNK

SC simplex size blank FCSC-SBLNK

SC duplex size blank FCSC-DBLNK

LC Duplex Couplers

LC Quad Couplers

LC Duplex Keystone Couplers

Blanks for Fibre Panels

TM

TM

TM

TM


FIBRE PAnELS

• Unique design allows LC & SC connectors to snap in flush to the front panel without screws.

• 1U panels with high density versions• Basic cable management kit comprising of gland &

self adhesive fibre support.• 206mm deep sliding tray • Numbered ports & write on port identification • 2 x 25mm & 2 x 20mm cable entry holes at rear • 20mm cable gland with up to 11mm cable entry

unloaded Sliding 1u Fibre Panels

Accepts up to 12 x SC duplex or 12 x LC quad couplers MAT107SP18

Accepts up to 24 x SC simplex or 24 x LC duplex couplers MAT107SP22

Accepts up to 24 x SC duplex or 24 x LC quad couplers MAT107SP24

Accepts up to 16 ST couplers MAT107SP16

Accepts up to 24 ST couplers MAT107SP23

Fibre Panels

Couplers and blanks: page 132-133

Panel accessories: page 135Fibre couplers: pages 132-133

Loaded Sliding 1u Fibre Panels

ST OM1/2 Multimode 4 port MAT107SP16C04

8 port MAT107SP16C08

16 port MAT107SP16C

24 port MAT107SP23C

SC OM1/2 Multimode 4 port (2 x duplex) MAT107SP18C04

8 port (4 x duplex) MAT107SP18C08

24 port (12 x duplex) MAT107SP18C


SC OM3/4 Multimode & OS1/2 Singlemode 4 port (2 x duplex) MAT107SP18CS04

8 port (4 x duplex) MAT107SP18CS08

24 port (12 x duplex) MAT107SP18CS

48 port (24 x duplex) MAT107SP24CS

LC OM1/2 Multimode 24 port (12 x duplex) MAT107SP22CS24


48 port (12 x quad) MAT107SP18QC

96 port (24 x quad) MAT107SP24QC

LC OM3/4 Multimode & OS1/2 Singlemode 4 port (2 x duplex) MAT107SP22CS04





48 port (12 x quad) MAT107SP18QCS

96 port (24 x quad) MAT107SP24QCS

ST OM1/2

Multimode

SC OM1/2

Multimode

SC OM3/4 Multimode

& OS1/2 Singlemode

LC OM3/4 Multimode

& OS1/2 Singlemode

LC OM1/2

Multimode

TM


FIBRE PAnEL ACCESSORIES

Pair of plastic spools with two adhesive bases. Designed to fit most fibre panels 900micron fibre loops around the spool for a neat presentation.

Self Adhesive plastic splice holders suitable for 45/ 61mm protectors.24 way version with clear perspex lid.

6 way

45 or 61mm clear splice protectors used for fusion splicing of multimode and Singlemode 900 Micron cables.

The Mini5 Panels come complete with one 20mm gland. Additional glands will be required when using more than one fibre cable into the panel.

Fibre Management Spool

Fibre Plastic Splice Holders

Fibre Splice Protectors

Fibre Panel Cable glands

TM

TM

TM

TM

MAT107-SPOOL

Grey 6 Position Holder FSPH-6

Black 12 Position Holder FSPH-12

Blue 24 Position Holder FSPH-24

45mm clear FSP45CR

61mm clear FSP61CR

20mm Black MT-GD20BK

25mm Black MT-GD25BK

Fibre testing: pages 146-150

24 way


FIBRE WALL EnCLOSuRES & EXTERnAL SPLICIng BOXES

Mini5 unloaded, lockable fibre wall enclosures to accept ST, SC or LC Multimode or Singlemode couplers. Grey pressed steel design with the option for one or two opening doors.

Plastic internal/external IP55 rated splice box for either multimode or singlemode cables. With splicing tray and two 20mm glands fitted to the bottom for entry/exitMaximum 12 fibres per splice tray. 378x180x74mm (HxWxD)

Designed for inline or spur jointing applications for 2 or 3 fibre multicore cables. IP rated for underground or aerial use. Black moulded design for minus 40 to plus 65˚C applications.Can be placed on aerial, underground, wall mounting and duct mounting applications. Injection moulded outer body makes it impenetrable by the elements.

Fibre Wall Enclosures

External Surface Mount Splice Box

Fibre underground Splice Enclosure

TM

TM

TM

Double Door: 358x121x360mm (WxDxH) 96port ST or FC MT-FWED96ST

48port SC Duplex MT-FWED48SC

72port LC Duplex MT-FWED72LC

MT-FOWS

Screws (pair) for mounting LC & SC couplers only MT-FWESCREW

24 splices MT-INLINE01

48 splices MT-INLINE02

Single Door: 225x50x270mm (WxDxH)

24port ST or FC MT-FWES24ST

12port SC Duplex MT-FWES12SC

18port SC Duplex MT-FWES18SC

Fibre couplers & accessories are not included: see pages 132-133

Custom pre-terminated fibre leads: page 127Fibre consumables: pages 140-145


MInI5 PRE-TERMInATED MTP FIBRE

Mini5 MTP® Cassette Modules provide rapid and secure transition between MTP and LC or SC discreet connectors. They are used to interconnect MTP backbones with LC or SC patching or connection to active equipment.Modular system allows for rapid deployment of high density data centre infrastructure as well as improved troubleshooting and reconfiguration during moves, adds and changes. Cassettes can be mounted in 1U or 3U 19” multislot chassis.MTP® Cassettes contain factory controlled and tested MTP-LC fanouts to deliver optical performance and reliability. Low loss MTP Elite and LC or SC premium versions are offered featuring low insertion loss for demanding power budget high speed networks.

Features:• MTP® (US Conec) brand MPO standard compliant

multifibre connector• LC (SFF Data Centre standard), SC discreet interface• Polarity A (standard), B or C• Factory terminated and tested• High performance zirconia sleeve adaptors

MTP® Cassette Modules

Product Code Configurator:

Part Number example: MTPE24LC50CASSB1

TM

See our Data Centre product section: pages 97-111

Quicknet pre-terminated copper system: page 47

Connector End A Fibre Count Discrete Fibre Type CASS Polarity Connector

MTP MTP 12 LC LC OS1/OS2 09 A N/A Standard

MTP Elite MTPE 24 SC SC OM1 62 B1 B1

OM2 50 B2 B2

OM3 OM3 C C

OM4 OM4



Mini5 MTP® ruggedised fan-out assemblies route multifibre MTP® connection into discreet connectors. They are used to directly interconnect MTP® cassettes, panels or backbone MTP® assemblies with the active equipment, saving costly data centre rack space and easing fibre management. MTP® fan-out assemblies are offered in fibre types in standard 12, 24 or 48 core versions using a compact and rugged micro cable structure. The compact cables optimise cableway use and improve airflow. Mini5 MTP® fan-out is built with highest quality components. Standard MTP® as well low loss Elite versions are offered featuring low insertion loss for demanding high speed networks where power budgets are critical.

Mini5 MTP® trunk multicore cable assemblies facilitate rapid deployment of high density backbone cabling in data centres and other high fibre environments reducing network installation or reconfiguration time and cost. They are used to interconnect cassettes, panels or ruggedised MTP® fan-outs. Compact cables optimise cableway use and improve airflow. Standard & Elite versions featuring low insertion loss for demanding high speed networks.

MTP® Fan-out Cable Assemblies

MTP® Trunk Cable Assemblies

• LSZH, OFNP cable jacket • Female or Male MTP® connectors • Factory terminated and tested



Part Number example: MTPF12SC5030ORLS

Part Number example: MTPFMTPF091250AAQLS

TM

TM

Connector GenderA Fibre Connector FibreType Cable Colour JacketType EndA Count EndB Length (M)

MTP MTP Female F 12 LC LC OS1/OS2 09 XX Aqua AQ LSZH LSStandard

MTP MTPE Male M 24 SC SC OM1 62 Purple PU OFNP PL Elite

48 OM2 50 Orange OR

OM3 OM3

OM4 OM4

Connector GenderA Connector GenderB FibreType Fibre Cable Polarity Colour Jacket EndA EndB Count Length Type (M)

MTP MTP Fem F MTP MTP Fem F OS1/OS2 09 12 XX A Aqua AQ LSZH LSStandard Standard MTP MTPE Male M MTP MTPE Male M OM1 62 24 B Purple PU OFNP PL Elite Elite OM2 50 48 C OrangeOR

OM3 OM3

OM4 OM4



Mini5 MTP® Slim line Panel provide secure transition between MTP® and LC or SC discreet connector interfaces. They are used to interface MTP® backbones with LC or SC patching and active equipment connection.The pre-populated panel allows rapid deployment of high density data centre infrastructure as well as improved trouble shooting and reconfiguration during moves, ads and changes. The shallow depth of the Slimline Panel makes it suitable for copper racking systems. Scaling up to 96 fibres panel is available for server rack in data centre environment. MTP® Slimline Panels contain factory controlled and tested MTP®-LC fan-outs to deliver optical performance and reliability. Low loss MTP® Elite and LC Premium versions are offered featuring improved low insertion losses for demanding low power budget high speed networks.

MTP® Slimline Panel


Part Number example: MTPPLCMTPEOM460

See our new 'Security' products section: pages 243-250

TM

MTTP FrontConnector RearMTPConnector FibreType FibreCount

LC LC MTPMalestandard MTP OS1/OS2 9 12 60

SC SC MTPMaleElite¨ MTPE OM1 62 24 72

OM2 50 36 84

OM3 OM3 48 96

OM4 OM4

MTTP


FIBRE TOOLIng

Miller Strippers are the industry standard fibre stripping tools.

Miller 2 Hole stripper MT-CFS-2

Miller 1 Hole stripper MT-1224

Shears & Cutters for the precise removal of kevlar from optical cables.

Miller Kevlar Shears MT-F1KS1

Miller Kevlar Cutters MT-F19809

Miller Round Jacket Slitter makes the removal of the outer jacket quick and simple. Use on Cable OD 4.5-28mm. Adjustable depth to 3mm.

Miller Jacket slitter MT-MK02

Mini5 Professional Cleave Tool MT-PFC20

Mini5 Field Cleaver is designed for use with pre term connectors and spices. MT-10010

TE High Precision Cleaver is designed for use with Lightcrimp plus, Corelinks and splicers. 1871696-1

Mini5 Professional Cleave Tool

TE High Precision Cleaver

Economy Scribe Tool MT-F090C

Flat Ruby blade MT-45357

Carbide Pen Style PAL19221

TM

TM

Strippers, Shears & Slitter

Cleavers

Scribe Tool

For use with epoxy termination connectors: Pages 131 & 132

The Mini5 Professional Precision Cleaver provides clean and accurate cleaves for mechanical connectors, splices and fusion splicing. Designed to precisely cleave all 125um multimode or singlemode optical fibers. The highly precise adjustable diamond blade can perform up to 60,000 cleaves with a typical cleave angle of 90±0.5°.

Mini5 Field Cleaver


FIBRE TOOL KITS

MT-0053 is a basic fibre tool kit, additional kits add further items.Supplied in a durable moulded HPX high performance water proof case, with pressure relief valve.

Basic Fibre Tool Kit

TM

Starter Tool Kit MT-0053

Fusion Splice Kit MT-0053FS

Anaerobic Tool Kit MT-0053AH

Minitran can also offer bespoke kits to suit your individual fibre needs. Call the Minitran sales office with your fibre tooling requirements.

• Tri hole fibre stripper• Kevlar scissors• Buffer stripper• Round cable stripper• Side cutting pliers• Needle nose pliers• 4 Bit screw driver• Black work mat

• Utility knife• PVC Tape • Safety glasses• Fibre disposal unit• Foam swabs • Cleaning tissues• Degreaser wipes• Ruler

• Fabric tape measure• 1/2" Nut runner• Fusion Splice Sleeves • Black marker pen • Tie labels • Heat Shrink tube kit• 1Mtr 3mm furnication

tube

• Mtr 900µm Furnication Tube

• Piano Wire • Fibre Optic wipes• Tweezers

Starter tool kit contents:

The Anaerobic kit features all the items in the MT-0053 kit with the following additional items added to allow Anaerobic termination on LC, ST and SC connectors.

• Anaerobic Hardener • Anaerobic Primer • Syringes • Carbide Scribe• Universal Crimp Tool • 1.25mm Polishing Puck

• 2.5mm Polishing Puck • Soft polish Pad • 1µm Polishing film x 5• 5µm Polishing film x 5• 0.3µm Polishing film x 5• 1.5µm Diamond film x 5

• 0.5µm Diamond film x 5• Glass Polishing Plate • 200x Microscope • 1.25mm Scope adaptor

Anaerobic tool kit contents:

Fusion Splice kit contents:The fusion splice kit features all the items in the MT-0053 kit with the following additional items added. • Cable Cutters• 50 pack 60mm Splice protection sleeves• Flashlight• Spatula.

Copper tool & test kits: page 252


FIBRE SyRIngES & POLISHIng

Two part Anaerobic quick cure adhesive is fully cured in minutes with no additional heat required.

For the optimum polishing of fibre connectors polishing plates and pads are essential items.

Professional precision stainless steel polishing pucks.

Mini5 polishing paper In packs of 25 and each sheet is 330mmx230mm.

Lightweight Tungsten coated Aluminium polishing pucks.

3 polish grades in 1 paper (0.3um/1um/5um)

Diamond Film: 150x100mm per sheet.

Syringes include a 0.9mm application needle.

Hardener MT-680

Primer MT-7649

Glass Polish Plate 330x230mm MT-9111

Glass Polish Plate 150x230mm MT-9111A

Soft polishing pad MT-053

Large Black work mat MT-024

2.5mm Stainless Steel MT-6925

1.25mm Stainless Steel MT-6928

grade Colour

0.3um White MT-109-03

1um Light Green MT-109-1

2um Aqua MT-109-2

5um Black MT-109-5

9um Light Blue MT-109-9

12um Dark Yellow MT-109-12

15um Dark Grey MT-109-15

2.5mm Tungsten/Alum PAL19201

1.25mm Tungsten/Alum PAL19261

25Pk 330x230mm MT-109-5-1-03

Diamond film 1um MT-0107-1S



Syringes 5 Pack MT-3IR5

Syringes 25 Pack MT-3IR25

TM

TM

TM

TM

Anaerobic Adhesive & Syringes

Polishing Plates & Mats

Polishing Pucks

Polishing Film


FIBRE COnSuMABLES & TESTIng

Handy and safe solution for the disposal of fibre shards.

Optical couplant gels can be used to reduce optical losses on mechanical splices and connectors.

These high power 650nm fault finders can be used to detect sharp bends and breaks in patch cords, patch panels and splices. Also useful when terminating mechanical fibre connectors. 2 x AA batteries & holster

These high power 650nm fault finders can be used to detect sharp bends and breaks in patch cords, patch panels and splices. Also useful to use when terminating mechanical fibre connectors. 2 x AA batteries & holster. 2.5mm for ST, SC, FC etc & 1.25mm for LC connectors.

This compact 200x scope is designed for multimode use and comes complete with 2.5mm and 1.25mm universal adaptors. Supplied with a case and batteries.

This 400x scope is designed for singlemode multimode use and comes complete with 2.5mm universal adaptor. Supplied with a case and batteries.

Large disposal bin MT-8828

Small disposal bin MT-8826

Optical gel pot 0.4oz MT-0001

Optical gel syringe 0.2oz MT-0001S

Laser fault finder 2.5mm (for ST, SC & FC) MT-F1900

Laser Fault Finder 1.25mm (for LC) MT-F1900-125

Continuity Tester 2.5mm MT-5000U

Continuity Tester 1.25mm MT-5000LC

200X Microscope MT-MS200X

400X Microscope MT-FIM400

1.25mm Adaptor MT-FIM1.25

TM

TM

TM

TM

TM

Disposal Pots

Index Matching gels

Laser Fault Finder

Fibre Continuity Tester

Inspection Microscopes


FIBRE & COnnECTOR CLEAnIng PRODuCTS

Microcare Sticklers can be used for cleaning bulkhead couplers and test equipment ports. 50 sticks per pack.

High purity lint free wipes for optical applications. Mini tub of 90 sheets.

Kim wipes are the standard for dry and wet optical cleaning. 280 wipes per box 100mm x 100mm.

This handy size cleaner can be used for the dry cleaning of connector end faces. approx 400 cleans.

Individual mild solvent impregnated tissues for quick and easy connector or hand tool cleaning. 50 tissues per box.

Handy pen size fibre cleaning solvent pen. Can be used with all cleaning wipes.

Mini5 Fibre Optic non woven wipes can be used alone or with cleaning solvents. Provides superior cleaning without scratching or lint residue.100mm x100mm.

Stickler connector and bulkhead cleaning fluid is a high purity optical cleaning agent.

2.5mm Cleaning Stick MT-MCC-S25

1.25mm Cleaning Stick MT-MCC-S12

Fibre Wipes MT-WFW

Lint Wipes LINFW

Connector Cleaner MT-F17020

Refill Reel 6.5Mtrs MT-F17021

Chemtronics Optic Prep MT-1003

Mini5 Optic Prep MT-OP50

Fibre Cleaning Pen MT-F16709

Mini5 Non woven Wipes (pack of 100) MT-F16702

Stickler Cleaning Fluid MT-POC03M

Sticklers

Wipes & Cleaning Fluid

Kim Wipes

Connector Cleaning

Optic Prep

Fibre Cleaning Solvent Pen

Cleaning Wipes

TM

TM

TM

TM

TM

TM


FIBRE CLEAnIng & MARKER PRODuCTS

Isopropyl is the ideal alcohol cleaning agent for optical fibres and connectors 1Ltr bottle.

Dgel cleaner is designed to remove the blocking gels found on loose tube fibres and on external telephone cables.

Micro dust spray includes extension nozzle to remove dust from connector bulkeads. 290ml

Techlube is a water based gel lubricant optimised for the pulling of optical fibres in ducting. 3.78Ltrs

Protect and locate buried fibre optic cable by placing a marker tape above the cable. Tape is 75mm wide x 305Mtrs long. Continuously marked, available in detectable and non-detectable versions.

Alcohol bottles for the safe dispensing of Isoproyl.

Isopropyl Alcohol IPA-1

DGel Spray 0.94Ltr MT-F11091S

Canned Air MT-F1700

Cable Pulling Lube MT-TLF001J

Non Metalic Fibre Tape MT-F551165

Detectable Fibre Tape MT-F16508

Auto Plastic bottle MT-007PL

Auto Glass Bottle MT-007P

Isopropyl Alcohol & Bottles

gel Remover

Air Duster

Cable Pulling Lubricant

Buried Cable Marker Tape

TM

TM

TM

TM

TM

IPA1

MT-007PL/P


OTDR

Greenlee 920 series OTDRs are designed to be robust and cost effective test instruments. Simple and easy to use, one button Autotest feature chooses the optimal test settings for the test link and displays the results on a colour screen. Result traces can be saved for later uploading via the USB port. Dual wavelength versions for both the single and multimode units. Single mode version features a built-in VFL port.

Features:• Economical• Protective Rubber boot• Compact handheld design• Easy to use• Fast automated testing• Up to 35db dynamic range• Large backlight LCD display• Measure length and defects of coiled fibre• Fibre analysis software for data management and

report generation• RS-232/USB interface• NiMH batteries for 8 hours continuous

OTDR Trace View and measure test results using either event view mode or manual measurement mode.

Hi Res Event ViewEasy view and measure in high resolution mode. Active cursor snaps to the next event in the fibre analysis table.

Singlemode version features a 650nm 3mw Visual Fault Locator (VFL) port.

Both kits supplied with SC adaptors, batteries, charger, trace analysis software and a carry case.

OTDR Multimode kit 850/1300nm 920XC-20M-UPC-SC

OTDR Singlemode kit 1310/1550nm 920XC-20C-UPC-SC

FC Adaptor for 920XC 52026957

ST Adaptor for 920XC 52026958

SC Adaptor for 920XC 52026959

greenlee OTDR


FIBRE LOSS KITS

The GRP series OPM are available in two versions. Both units are zero reference models but the GRP460 series offer the ability to save and upload 1K of test results per wavelength.

The GRP series OLS are available in two versions. The GDLS350 is for multimode applications and features 850 & 1300nm outputs, the GDLS355 is for singlemode applications and features both 1310 and 1550nm outputs. Additional features include a 2Khz tone generation which can be picked up by the GRP series OPMs.

Optical Power Meters

Optical Light Sources & Visual Fault Finder

The NEW Greenlee Mini Fibre Test (GMFT) range of fibre test tools allows you to configure a test kit to suit your exact needs. 2 Year warranty on Greenlee Micro fibre tools.

OPMs

Zero ref setting GRP450-02

Zero ref & Save GRP460-02

Adaptor caps

GRP Series 1.25mm Adaptor GAC021

GRP Series SC Adaptor GAC026

GRP Series FC Adaptor GAC028

GRP Series LC Adaptor GAC029

Optical Light sources

MM 850nm/1300nm GDLS350

SM 1310 /1550nm GDLS355

Adaptor Caps

GDLS series FC Adaptor GAC022

Visual Fault Finder (VFL)

The GVF610 is a high output 635nm visible laser source for fault location in splices, patchcords & connectors. 2.5mm universal adaptor for ST/SC/FC connectors GVF610

Power Meter Selector Do you need to save and print results?YES: use the GRP460-02; NO: use the GRP450-02The GRP meters are fitted with a 2.5mm universal interface. Use the GAC026 SC interface to match the GDLS light source interface Light Source Selector Are you testing: Multimode: Use GDLS350 Singlemode: Use GDLS355Both: Use both the GDLS 350 & GDLS355Visual Fault Locator: If a visual fault locator is required add a GVF610Deluxe carry case: Add a GDFC if a multi-instrument case is required. Each unit is supplied with a single case, the deluxe case allows all the instruments to be protected in a single case.


VISuAL InSPECTIOn SySTEM

Each GVIS system is supplied with a cleaning kit. Two versions of the probe and monitor are available, the -USB version features the ability of realtime image uploading to a PC via the onboard USB port for image achieving.

300 Monitor & probe Kit GVIS300MP

300 Monitor inc USB capture and Probe Kit GVIS300MP-USB

For those who do not require the monitor, the GVCM410 Video Capture Module allows the GVIS 300 Probe to be connected directly to a PC via a USB port without using the GVIS300 monitor. The end-face image can then be displayed directly on the computer using the Greenlee inspection software.

USB Video Capture Module GVCM410

The GVIS300 probe can be used as a replacement probe or in conjunction with the GVCM410 video capture module to allow endface inspection via a PC.

GVIS 300 Probe 2.5mm Universal tip GVIS300P

The GVIS series of inspection scopes offer an unique focusing system and a wide field of view for superb image quality. Inspection probe features blue LED endface illumination. 8-10 hours of operation from the advanced Li Ion battery with a 3 hour charge. Each kit is supplied with the monitor and probe, SC bulkhead adaptor and a 2.5mm connector adaptor.

Visual Inspection System

Accessories

SC bulkhead Adaptor GAC040

SC/APC Bulkhead Adaptor GAC041

FC Bulkhead Adaptor GAC042

LC Bulkhead Adaptor GAC044

ST Bulkhead Adaptor GAC046

1.25mm Universal Connector Adaptor GAC048

2.5mm Universal Connector Adaptor GAC049

GMFT Deluxe Carry Case GMFTDC

See our building to building laser links (FSO): pages 202-203 Fibre runner system. Contact us for details.


SuMITOMO FuSIOn SPLICER

Features:• Fast dual independent heat shrink ovens • 7 Second splice time • High resolution, fully navigational touch screen

monitor • SD port for unlimited data storage + favorite

program, video, audio and software uploads • Internet interface for software upgrades • Industry’s only video & audio playback • Lightest weight & smallest footprint CA splicer • Ruggedised design for shock, water & dust

resistance • Automatic splice start, arc calibration, heater start

and fibre identification • Hard carrying case with integrated work platform • Multiple positional monitor with automatic display

inversion • Fibre holder or fibre clamp selectable • Long life battery for 200 splice and heater cycles

per charge • Lynx2-mini and lynx2–customfit® splice-on

connector compatibility • 3000 splce electrode life • 2.1Kg with battery

T-71C Kit includes:Splicer with dual ovens Sumitomo Precision Cleaver250um and 900um fibre holdersJacket stripper Battery pack AC interface/ChargerSpare ElectrodesCleaning ToolsShring sleeve cooling tray Fibre sleevesManual Hard Transit case

The Sumitomo T -71C is the Industry’s 1st and ONLY core alignment fusion splicer with a fully navigational touch screen interface for optimum user

friendliness, SD port for virtually unlimited data storage, plus favorite program, video, audio, and software uploads; Remote maintenance capability, the largest fiber view and the longest electrode life—with the legendary reliability common to all Sumitomo splicers. Although it’s also the lightest, smallest, and most advanced CA fusion splicer in the industry. The T-71C is more ruggedized with superior dust, shock and water-proof resistance making it the ideal choice for even the harshest environments.

Sumitomo T-71C Fusion Splicer

Sumitomo T-71C Splicer Kit T-71C

Mini5 Splicer Tool Kit MT-0053FS

Labelling systems: pages 94-96

All Sumitomo T-71C kits purchased from Minitran include a one day fibre training course on the use of this splicer.


nETWORK AnALySERS

LANXperts are supplied with the relevant modules, AC adaptor, case and instructions.

Model

10/100/1000BaseT

Single/Multmode Fibre

Network Analysis

RFC2544 Test

Loopback Test

Cable Test

PoE test

Inline testing

VoIP testing

Packet capture

Traffic Generator

LE85

√

√

√

√

√

-

-

√

√

√

√

LE80

√

-

√

√

-

√

√

√

√

√

√

The Psiber LANxpert range of network analysers allow network professionals to quickly maintain and optimise network services. Two models are available, the LE80 for 10/100/1000Mbps copper networks and the LE85 Gigabit copper and Gigabit fibre version.

LE85 Version is designed for analysis of Gigabit fibre links. Offering a similar core feature set to the LE80 analyser, except this unit is optmised for gigabit fibre links.To test copper links the copper SFP is used. Two versions of the LE85 are available, the LE85M for multimode and copper analysis and the LE85S for singlemode and copper analysis. Additional SFP are available.

The LE80 offers 10/100/1000Mbps Copper Ethernet network analysis • Colour touch screen• Inline packet Inspection• Identify Traffic Protocols with amount and

percentage breakdowns• Captures upto 10K packets for analysis • Measures PoE voltage and Power • VoIP traffic, call statistics & Quality • IPv6 detection • RFC2544 Stress testing • Identify standard link, frame & traffic problems • Test cables for wiremap and length

LE85 Multimode/Copper LE85M

LE85 Single mode/Copper LE85S

Additional SFP Modules

SFP Gigabit Copper GB-D01AN

SFP Gigabit SX MM MM-F12CY

SFP Gigabit LX SM SM-F22EY

LANXpert Gigabit Analyser LE80

gigabit Fibre & Copper Analysers

Copper Ethernet network Analyser

fibre cable fibre patch leads fibre ...minitran.co.uk 124 cut to length fibre cable nylon armoured...

Documents