federal aviation administration ~tr ~gencp ~erttf tcate · rating specifications limitations...

UNITED STATES OF AMERICA

DEPARTMENT OF TRANSPORTATION FEDERAL AVIATION ADMINISTRATION

~tr ~gencp ~erttf tcate f~ I9SR491N

5lza~a~b?-INERTIAL AIRLINE SERVICES, INC.

(DBA) INERTIAL AEROSPACE SERVICES, INC.

eo/Uk!e, ~~a 375 ALPHA PARK DRIVE

HIGHLAND HEIGHTS, OHIO 44143

o/u»v ~ Uvd ~ ~ ~ t'4v di ?Ced/teca ~de~~de:T~~~ ~ b?- de ~W/te?t£ ~ tUv ~ ~, ~ a M3/'~ &-~ rMv 3/r~ REPAIR STATION

~de~~-· RADIO

INSTRUMENTS LIMITED ACCESSORY

SPECIALIZED SERVICES (2/1/2008)

5lza ~, U?~ ~~MC,~

a/uz/1 ~ m #ot INDEFINITELY.

January 6, 1997 REISSUED: 02/01/2008

(!gJ?,z{,~~o/d,~.,~

~1~ _(!lt;p,z,~ LEii'lf V11

G.'toORE MANAGER, CLE FSDO

Wbis <!i:trtifirntc is not 'Ql:raru,fmtblc, ANO ANY MAJOR CHANGE IN THE BASIC FACILITIES, OR IN THE LOCATION THEREOF, SHALL BE IMMEDIATELY REPORTED TO THE APPROPRIATE REGIONAL OFFICE OF THE FEDERAL AVIATION ADMINISTRATION

A11y alteratio11 of this certificate is pm,islmble by a fille of ,wt exceeding $1,000, or i111priso11111e11t 11ot exceedi11g 3 years, or both

FAA Form 8000-4(1-67) SUPERSEDES FAA FORM 390. Electrooic F om,s (PDF)

U.S. Department of Transportation Federal Aviation Administration

001 Issuance and Applicability

002 Definitions and Abbreviations

003 Ratings and Limitations

Operations Specifications

Table of Contents

PartA

HQ CONTROL DATE

02/11/2016

12/14/2017

04/03/2017

004 Summary of Special Authorizations and Limitations 09/23/1998

007 Designated Persons 12/19/2006

025 Electronic/Digital Recordkeeping System, Electronic/Digital Signature, and Electronic Media

04/03/2017

449 Antidrug and Alcohol Misuse Prevention Program 07/17/2009

Inertial Airline Services, Inc. Part A-1 Print Date: 6/24/2020

EFFECTIVE AMENDMENT DATE NUMBER

02/25/2016 12

01/17/2018 9

06/24/2020 32

03/08/2011 7

10/12/2016 9

05/04/2017 2

11/24/2009 5

Certificate No.: I9SR491N



A001 . Issuance and Applicability HQ Control: 02/11/2016

HQ Revision: 060

a. These operations specifications are issued to Inertial Airline Services, Inc., a Repair Station located in the United States, pursuant to 14 CFR Part 145, § 145.53. The repair station certificate holder shall conduct operations in accordance with 14 CFR Part 145 and these operations specifications.

The certificate holder's address:

Fixed Location: Inertial Air! ine Services, Inc. 375 Alpha Park Dr. Highland hts., Ohio 44143

Mailing Address: Inertial Airline Services, Inc. 375 Alpha Park Dr. Highland hts., Ohio 44143

b. The holder of these operations specifications is the holder of certificate number I9SR491N and shall hereafter be referred to as the "ce1iificate holder".

c. These operations specifications arc issued as part of this repair station certificate and are in effect as of the date approval is effective. This certificate and these operations specifications shall remain in effect until the certificate for a repair station that is located in the United States is surrendered, suspended, or revoked.

d. The repair station specified on these operations specifications and located within the United States performs maintenance and/or an alteration of aircraft and/or aeronautical products to be installed on aircraft under the terms and conditions of the U.S./EU Safety Agreement, Annex 2, Maintenance, between the FAA and the EU.

e. The certificate holder is authorized to conduct the operations described in subparagraph a under the following other business names:

Inertial Aerospace Services, Inc.

Delegated authorities: None

Inertial Airline Services, Inc. A0OI-1 Arndt. No: 12




L Issued by the Federal Aviation Administration. 2. These Operations Specifications are approved by direction of the Administrator.

Digitally signed by Reginald Washington, Principal Avionics Inspector (GL25) [l] SUPPORT INFO: Mandatory HQ Revision [2] EFFECTIVE DATE: 2/25/2016, [3] AMENDMENT#: 12 DATE: 2016.02.25 05:48:06 -06:00

3. I hereby accept and receive the Operations Specifications in this paragraph.

Lewis, Blaine, Director of Quality Assurance Date

Inertial Airline Services, Inc. A00l-2 Arndt. No: 12

Ce1tificate No.: l9SR491N

U.S. Department of Transportation Federal Aviation Administration Operations Specifications

A002 . Definitions and Abbreviations HQ Control: 12/14/2017 HQ Revision: 05d

Unless otherwise defined in these operations specifications, all words, phrases, definitions, and abbreviations have identical meanings to those used in 14 CFR and 49 U.S.C., as cited in Public Law 103-272, as amended. Additionally, the definitions listed below are applicable to operations conducted in accordance with these operations specifications.

BASA

Certificate Holder

CAAS

CFR

Class Rating

EASA

EASA Accountable Manager

EU

Exemption

FOCA

FAA Accountable Manager

Inertial Airline Services, Inc.

The Bilateral Aviation Safety Agreement (BASA) is an executive agreement concluded between the United States and a foreign country for the purpose of promoting aviation safety; also !mown as an Agreement for the Promotion of Aviation Safety.

In these operations specifications, the tenn "certificate holder" means the holder of the repair station certificate described in these operations specifications in Part A paragraph A00! and any of its officers, employees, or agents used in the conduct of operations under this certificate.

Civil Aviation Authority of Singapore

Code of Federal Regulations

As used with respect to the certification, ratings, privileges of airframes, powerplants, propellers, radios, instruments, and accessories within a category having similar operating characteristics.

European Aviation Safety Agency

The manager who has corporate authority for ensuring that all maintenance required by the customer can be financed and carried out to the standard required by the EASA full-member Authority.

European Union

An authorization that permits an alternate means of compliance with a specific CFR. The exemption must meet the procedural requirements ofl 4 CFR Part I I.

Federal Office of Civil Aviation

A person designated by the certificated repair station who is responsible for and has authority over all repair station operations that are conducted under I 4 CFR Part 145, including ensuring that the repair station's personnel follow the regulations and serving as the primary contact with the FAA.

A002-l Arndt. No: 9

Certificate No.: l9SR491N


Geographic Authorization

Limited Rating

Limited Ratings -Specialized Services

Line Maintenance

MAG

Maintenance

U .S./EU Aviation Safety Agreement, Annex 2, Maintenance

MIP

MOE

Inertial Airlioe Services, Inc.


Authorization provided to a repair station located outside the United States to perform maintenance support under contract for a U.S. air carrier (or an operator of U.S.- registered aircraft under 14 CFR Part 129) at a location other than the repair station's main facility. A geographic authorization is issued by the FAA to respond to a U.S. air carrier's or Part 129 foreign operator's need for maintenance at a station where the frequency and scope of that maintenance does not warrant permanently staffing and equipping the station for its accomplishment.

A rating issued to repair stations for the performance of maintenance on particular makes and models of airframes, powerplants, propellers, radios, instruments, accessories, and/or parts.

Rating issued for a special maintenance function when the function is performed in accordance with a specification approved by the Administrator.

Any unscheduled maintenance resulting from unforeseen events, or scheduled checks where certain servicing and/or inspections do not require specialized training, equipment, or facilities.

The Maiotenance Annex Guidaoce (MAG) defines the process that the FAA and EASA undertake io the iospection, findings of compliance certification, and monitoring of repair stations, as well as their joint cooperation in quality assurance and standardization activities in support of the EASA Agreement, Annex 2, Maintenance. The term Maintenance Agreement Guidaoce (MAG) defines the processes and activities applicable to a specific country under an MIP, and is not associated with the EASA Agreement.

The inspection, overhaul, repair, preservation, and replacement of parts, but excludes preventive maintenance.

Annex 2 covers the reciprocal acceptance of findings of compliance, approvals, documentation and technical assistance regarding approvals and the monitoring of repair stations/maintenance organizations.

Maiotenance Implementation Procedures (MIP) are procedures for implementing the provisions of a BASA that apply to maintenance performed under 14 CFR Part 145, Section 145.53(b).

A maintenance organization exposition (MOE) pertains to procedural manuals used by maintenance organizations certificated by a foreign country. The MOE along with the FAA Supplement, sets forth the structure and procedures of the repair station to meet the requirements of 14 CFR Part 145 under a MIP.

A002-2 Arndt. No: 9

Certificate No.: 19SR491N


Preventive Maintenance

QCM

Repair Station located in the United States

Repair Station located outside the United States

RSM


As defined in 14 CFR part I and part 43 appendix A, subparagraph ( c ).

Quality Control Manual

A FAA certificated repair station located in the United States.

A FAA certificated repair station located outside of the United States.

Repair Station Manual

I. Issued by the Federal Aviation Administration. 2. These Operations Specifications are approved by direction of the Administrator.

Digitally signed by Jose R. Borges, Principal Avionics Inspector (GL25) [I] EFFECTIVE DATE: 1/17/2018, [2] AMENDMENT#: 9 DATE: 2018.01.17 15:19:07 -06:00


/~ I /31/Z,J\8 Thom, William, Director of Quality Assurance Date

Inertial Airline Services, Inc. A002-3 Arndt. No: 9

Certificate No.: !9SR491N



A003 . Ratings and Limitations HQ Control: 04/03/2017

HQ Revision: Ota

The certificate holder is authorized the following Ratings and/or Limitations:

Class Ratings

Radio Class 2: Navigational Equipment

Instrument Class I: Mechanical

Instrument Class 2: Electrical

Instrument Class 3: Gyroscopic

Instrument Class 4: Electronic

Limited Ratings

Manufacturer Make/Model

Accessories Iloncywcll Integrated Switch Panel 4073972-3, -301, -4, -401, -5, thru -10

General Electric Servo 305RAAl/305RAA2

Iloneywcll Wingtip and anti-collision light assemblies.

Limited Ratings - Specialized Services

Limitations

Repair, test and return to service per current American Airlines (AALA) maintenance instructions.

Maintenance and repair in accordance with current manufacturer's instructions.

Repair, test and return to service of the following part numbers per current manufacturer's instructions. 72303219-1, 72303219-2, 72303219-3, 72303219-4, 72303218-1, 72303218-2, 72303218-3, 72303218-4, 72305039-1, 72305039-2, 72305039-3, 72305039-4

Rating Specifications Limitations Accessory Inertial Airline Services process

Specification l 1037PM R-2 dated 06/13/2013 or later approved revision.

Instrument Inertial Airline Services Process Specification 10669M or later approved revision

Maintenance, repair, test and return to service IIoncywcll 1593917-1.

Maintenance and return lo service of Honeywell lntcrgratcd Switch Panel Touch Assembly part numbers 4073972-3, -301, -4, -401 thru -10 and IDD Aerospace 3LP20-

Inertial Airline Services, Inc. A003-l Arndt. No: 32




Rating Specifications

Inertial Airline Services Process Specification 10372RM or later approved revision.

Limitations 3, -4, 865-000103-3 thru -6, -9, -10.

Maintenance, repair and return to service ofIIonctwcll Gyro Spare Kits PIN 10095212-XXX as identified in 10372RM

Inertial Airline Services Process Maintenance, repair and return to service of Goodrich Fuel Specification 10882PM Rev. 06 or later Quantity Indicator Display PIN 10080-1800-XXX as approved revision identified in 10882PM.

Inertial Airline Services Process Maintenance, repair, test and return lo service of Fuel Specification 28-42-02-01 or later Quantity Indicator PIN !0037-1000-0151 to -0166 approved revision

Inertial Airline Services Process Specification I 0971 PM R-0 I or later approved revision

Inertial Airline Services Process Specification 11004 PM R-02 or later approved revision

Inertial Airline Services Process Specification 11034 PM R-01 or later approved revision

Inertial Airline Services Process Specification 11176 PM R-1.0 or later approved revision

Inertial Airline Services Process Specification 28-42-02-03 or later approved revision

Inertial Airline Services Process Specification I 1206PM or later approved revision

Inertial Airline Service Process Specification 11204PM Rev I or later approved revision

Inertial Airline Services Process Specification l I 222pm Revision 1.0 or later

Inertial Airline Services Process Specification 10993RM Rev. I Dated 04/28/2016

Inertial Airline Services Process Specification 11164RM Rev. I Dated 04/28/2016

Inertial Airline Services Process Specification I 1232PM R-3 or later approved revision.

Maintenance, repair, test and return to service of Goodrich Fuel Quantity Indicators Display Module part numbers 2302430-1 and 67109-10 I.

Maintenance, repair test and return to service of Goodrich Fuel Quantity Indicator End Cap Assembly part numbers 10037-1500-0750, -0751 and -0770.

Maintenance, repair, test and return lo service of Goodrich Fuel Quantity Indicator End Cap Assembly part numbers 10037-1500-0750, -0751 and-0770.

Rcprograming of Flash Memory for Honeywell IIG2050AC02-ACI I A3 P/N 26015235-402 and A4 PIN 26016610-10 I circuit card assemblies.

Maintenance, repair, test and return to service Interconnect Assembly part number I 0037-0408-01

Maintenance, repair, test and return to service of Goodrich Fuel Quantity Indicator Display Module Part Numbers 10037-0750 and 10037-770

Maintenance, repair, test and return to service of Goodrich Fuel Quantity Indicator Display Module Part numbers I 0080-0403/-0404 and I 0080-1800-05041-0505

Programming Procedures for Iloncywcll HG 1050 A I CCA. Iloncywcll part numbers 26012875-XXX and 266804-XXX circuit card assemblies EPROM CHIPS

Procedure for Fuel Quantity Indicator Housing Assembly part number 10037-1300-0750 cover glass replacement

Procedure for Fuel Quantity Preselect Indicator Ilousing Assembly part number 10037-1300-077X cover glass replacement

Maintenance, repair, test and return to service of Goodrich Fuel Quantity Indicator Encl Bell Module Part number I0037-I005-0I02 and -0104

Inertial Airline Services Process Glass replacement procedure for Load Select Indicator Specification 10677RM Rev 01 or later (10078-0101) approved revision.

Inertial Airline Services Process Procedure to assemble Display Module Assembly on Specification l 1253RM Rev 02 or later Goodrich Fuel Quantity Indicator 10037-0750 approved revision.

Inertial Airline Services Process Maintenance, repair and return lo service P/N 65507-Spccilication I 1066RM Rev 00 or later 26015373-XXX and 65507-66020206-XXX as identified in approved revision. 1 I066RM


Certificate No.: I9SR49IN


Rating Specifications


Limitations

Inertial Airline Services Process Maintenance, repair and return to service of Thales Inertial Specification I 1278RM Rev 01 or later Measurement Unit P/N E16371XX, El8520XX, E18493XX approved revision.

I. Issued by the Federal Aviation Administration. 2. These Operations Specifications arc approved by direction of the Administrator.

Digitally signed by Jose R. Borges, Principal Avionics Inspector (GL25) [l] EFFECTIVE DATE: 6/24/2020, [2] AMENDMENT#: 32 DATE: 2020.06.24 14:28:57 -05:00


William Thorn, Director of Quality Assurance Date


Certificate No.: I9SR49 l N

U.S. Department ofTransportatlon Federal Aviation Administration Operations Specifications

A004 . Summary of Special Authorizations and Limitations HQ Control: 09/23/1998 HQ Revision: 010

a. The certificate holder, in accordance with the reference paragraphs, is authorized to:

Use an approved electronic recordkeeping system, electronic/digital signature, and/or electronic media.

Reference Paragraphs

A025

Conduct operations choosing to have an antidrug and alcohol misuse prevention A449 program.

b. The certificate holder is not authorized and shall not:

Use Exemptions.

Reference Paragraphs A005

Perform maintenance with NAA ratings where the scope of work is authorized A060 by a BASA/MIP.

Perform work, including continuous operations, at additional locations other than AIOI at its primary fixed location. Perform maintenance in accordance with foreign repair station geographic authorizations. B050

Pe:fo~ work, excluding continuous operations, at additional locations other than DI 00 at its pnmary FIXed Locatron. Perform line maintenance for cert. holders conducting operations under Parts 121 and 135 and for foreign carriers/persons operating U.S. registered aircraft in Dl0? common carriage under Part 129, apart from DI00 which authorizes that work away from station.

Print Date: 3/8/2011 A004-1 Certificate No.: 19SR491N Inertial Airline Services, Inc.


I. Issned by the Federal Aviation Administration . 2. Support information reference: 3. These Operations Specifications are approved by direction of the Administrator.

• 201 L03.08 16:47:09 Central Standard Time Location: WebOPSS Digitally signed by Jose R Borges, Principal Avionics Inspector {GL25)

4. Date Approval is effective: 03/08/2011 Amendment Number: 7 5. I hereby accept and receive the Operations Specifications in this paragraph.

Blaine R. Lewis, , Director of Quality

Date: 03/08/2011

Print Date: 3/8/2011 A004-2 Certificate No.: I9SR491N Inertial Airline Services, Inc.


A007 . Designated Persons


HQ Control: 12/19/2006 HQ Revision: 030

a. The personnel listed in the following table are designated to officially apply for and receive operations specifications for the certificate holder indicated below.

Table 1 - Designated Persons to Apply for and Receive Authorizations Title Name Parts Authorized

FAA Accountable Manager, 145 Wright, Nicholas A

Director of Quality Assurance Thom, William A

b. The following personnel listed in Table 2 are designated by the certificate holder to receive Information for Operators (INFO) messages for the certificate holder as indicated below. A receipt for the information by an operator or person is not required.

Table 2 - Designated to Receive INFO Messages Name Email Address Telephone No. Type of Information to Receive

William Thom [email protected] 440 995-3765 ALL

I. Issued by the Federal Aviation Administration. 2. These Operations Specifications are approved by direction of the Administrator .

•

Digitally signed by Jose R. Borges, Principal Avionics Inspector (GL25) [l] EFFECTIVE DATE: 10/12/2016, [2] AMENDMENT#: 9 DATE: 2016.10.12 13:25:37 -05:00


Wfi--- 1°,/4.,/i~tG Thom, William, Director of Quality Assurance Date


Certificate No.: 19SR491N


A025 . Electronic/Dii,:ital Recordkeepini: System, Electronic/Dii:ital Sii:nature, and Electronic Media

HQ Control: 04/03/2017

HQ Revision: 00b

a. The certificate holder is authorized to use an acceptable electronic/digital recordkeeping system, described and/or referenced in this paragraph (if none, enter NIA.)

Quality Program Manual section 4.2.1

b. The certificate holder is authorized the use of the following electronic/digital signature procedures (if none, enter "N/ A").

NIA

c. The certificate holder is authorized to use electronic media for the repair station and quality control manuals, if acceptable (if none, enter "NI A").

Electronic media accepted for Repair Station Manual, Quality Program Manual, Training Manual, and associated information is Compact Disk (CD).

I. Issued by the Federal Aviation Administration. 2. These Operations Specifications are approved by direction of the Administrator.

_ __ ,_ Digitally signed by Jose R. Borges, Principal Avionics Inspector (GL25) (f' •t [I] EFFECTIVE DATE: ~/4/20 I _7, (2) AMENDMENT #: 2

, ,,~ . DATE. 2017.05.04 14.46.32 -05.00


Thorn, William, Director of Quality Assurance Date

Inertial Airline Services, Inc. A025- l Arndt. No: 2

Certificate No.: !9SR49 l N


A449 . Antidrug and Alcohol Misuse Prevention Program HQ Control: 07/17/2009 HQ Revision: OOa

a. The Part 145 repair station certificate holder has elected to implement an Antidrug and Alcohol Misuse Prevention Program, because the certificate holder performs safety-sensitive functions for a 14 CFR Part 121, and 135 certificate holder and/or for a 14 CFRPart 91 operator conducting operations under Section 91.147.

b. The certificate holder certifies that it will comply with the requirements of 14 CFR Part 120 and 49 CFR Part 40 for its Antidrug and Alcohol Misuse Prevention Program.

c. Antidrug and Alcohol Misuse Prevention Program records are maintained and available for inspection by the FAA's Drug Abatement Compliance and Enforcement Inspectors at the location listed in Table I below:

Table 1 Location & Telephone of Antidrug and Alcohol Misuse Prevention

Program Records:

Telephone Number: Al (440) 995-6555 Address: 375 Alpha Drive Address: NIA

City: Heighland Heights State: OH

Zip code: 44143

d. Limitations and Provisions.

(1) Antidrug and Alcohol Misuse Prevention Program inspections and enforcement activity will be conducted by the Drug Abatement Division. Questions regarding these programs should be directed to the Drug Abatement Division.

(2) The certificate holder is responsible for updating this operations specification when any of the following changes occur:

(a) Location or phone number where the Antidrug and Alcohol Misuse Prevention Program Records are kept.

(b) If the certificate holder's number of safety-sensitive employees goes to 50 and above, or falls below 50 safety-sensitive employees.

(3) The certificate holder with 50 or more employees performing a safety-sensitive function on January I of the calendar year must submit an annual report to the Drug Abatement Division of the FAA.

(4) The certificate holder with fewer than 50 employees performing a safety-sensitive function on January I of any calendar year must submit an annual report upon request of the Administrator, as specified in the regulations.

The certificate holder has fewer than 50 safety-sensitive employees.

Print Date: 11/24/2009 A449-1 Certificate No.: l9SR491N Inertial Airline Services, Inc.


1. Issued by the Federal Aviation Administration . 2. Support information reference: 3. These Operations Specifications are approved by direction of the Administrator.

• 2009.11.24 14:37:40 Central Standard Time Location: \VcbOPSS Digitally signed by Jose R Borges. Principal Avionics Inspector

4. Date Approval is effective: 11/24/2009 Amendment Number: 5


Blaine R. Lewis, , Director of Quality

Date: 11/24/2009

Print Date: 11/24/2009 A449-2 Certificate No.: l9SR491N Inertial Airline Services, Inc.

federal aviation administration ~tr ~gencp ~erttf tcate · rating specifications limitations...

Documents