features: • electronic throttle trollmaster pro3...

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care

Aux. Brkts/Tilt/Trim

Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

Mfg #TM200DPROTM200DPRO2TM200DPRO3

TM201DPROTM201DPRO2TM201DPRO3











DescriptionHonda 8, 9.9 & 15 ('80-2000) PROHonda 8, 9.9 & 15 ('80-2000) PRO2Honda 8, 9.9 & 15 ('80-2000) PRO3

Merc Mariner ('90-'04) & Yamaha ('90-'06) 9.9 & 15 PROMerc Mariner ('90-'04) & Yamaha ('90-'06) 9.9 & 15 PRO2Merc Mariner ('90-'04) & Yamaha ('90-'06) 9.9 & 15 PRO3

Merc 5 & 6 (All Years) Nissan/Tohatsu 5 & 6 ('95-Present) PROMerc 5 & 6 (All Years) Nissan/Tohatsu 5 & 6 ('95-Present) PRO2Merc 5 & 6 (All Years) Nissan/Tohatsu 5 & 6 ('95-Present) PRO3

Yamaha 6, T8 (All Years) & 9.9 ('08-Present) PROYamaha 6, T8 (All Years) & 9.9 ('08-Present) PRO2Yamaha 6, T8 (All Years) & 9.9 ('08-Present) PRO3

Honda 8, 9.9, 15 & 20 ('01-'10) PROHonda 8, 9.9, 15 & 20 ('01-'10) PRO2Honda 8, 9.9, 15 & 20 ('01-'10) PRO3

John/Evin/Suzuki 9.9 & 15 ('03-Present) PROJohn/Evin/Suzuki 9.9 & 15 ('03-Present) PRO2John/Evin/Suzuki 9.9 & 15 ('03-Present) PRO3

Mercury 15 & 20 Tiller Only ('08-'09) PROMercury 15 & 20 Tiller Only ('08-'09) PRO2Mercury 15 & 20 Tiller Only ('08-'09) PRO3

Yamaha High Thrust/Large Power Head 9.9, 15 (2007) PROYamaha High Thrust/Large Power Head 9.9, 15 (2007) PRO2Yamaha High Thrust/Large Power Head 9.9, 15 (2007) PRO3

Niss/Tohatsu 8 & 9.8 (2003 Featherweights) PRONiss/Tohatsu 8 & 9.8 (2003 Featherweights) PRO2Niss/Tohatsu 8 & 9.8 (2003 Featherweights) PRO3

Mercury 8 & 9.9 Remote Shift/Throttle ('05-'10) PROMercury 8 & 9.9 Remote Shift/Throttle ('05-'10) PRO2Mercury 8 & 9.9 Remote Shift/Throttle ('05-'10) PRO3

Mercury 8 & 9.9 Tiller ('05-'10) PRO Mercury 8 & 9.9 Tiller ('05-'10) PRO2Mercury 8 & 9.9 Tiller ('05-'10) PRO3

Mercury 15 & 20 Remote & Tiller ('11-Present) PROMercury 15 & 20 Remote & Tiller ('11-Present) PRO2Mercury 15 & 20 Remote & Tiller ('11-Present) PRO3

Order No.NET

571705717157172

571735717457175

571765717757178

571605716157162

571795718057181

571825718357184

571855718657187

571885718957190

571915719257193

571645716557166

571675716857169

571945719557196

Retail$239.99 279.99 389.99

$239.99 279.99 389.99

$239.99 279.99 389.99

$239.99 279.99 389.99

$239.99 279.99 389.99

$239.99 279.99 389.99

$239.99 279.99 389.99

$239.99 279.99 389.99

$239.99 279.99 389.99

$239.99 279.99 389.99

$239.99 279.99 389.99

$239.99 279.99 389.99

FEATURES: • Electronic throttle control • precision throttle control • Momentary full throttle burst control • 25' cable • Water resistant control • Easy installation • Works with all Panther electro steer units

TrollMaster Pro Control boat speed with a dial that aids in recreating exact speeds with the idle function.

TrollMaster Pro2: Adds 10 times the micro speed control adjustments. Allows for momentary bursts of full throttle speed for adjusting your heading.

TrollMaster Pro3: Adds steering ability to the kicker with the same remoted when interfaced with a Pan-ther elector steer unit.

260N

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

DescriptionChrysler 3.5 - 140 hp outboardsForce 4 - 150 hp outboards and L-drives

Evinrude/Johnson 1.5 - 125 hpEvinrude/Johnson Electric - 40 hpEvinrude/Johnson 50 - 235 hpEvinrude/Johnson 2 - 300 hpEvinrude/Johnson 2-70 hpEvinrude Johnson 85-300 hpEvinrude/Johnson 5-70 hp 4-Stroke

Honda 2-130hp

Mercury 75-225 hp 4-strokeMercury 3.9 - 135 hpMercury Electric - 40 hpMercury 45 - 225 hpMercury 3 - 275 hpMercury 2.5-60 hpMercury 75-275 hpMercury 4-90 hp four stroke O/BMerc/Mariner 2.5-60 hpMerc/Mariner 75-250 hp

Mariner 2.5 - 275 hpMariner Electric - 200 hp

Mercruiser stern drivesMercruiser Alpha/Bravo stern drivesMercruiser Alpha 1, Bravo 1, Bravo 2, Bravo 3Mercruiser Alpha 1, Bravo 1, Bravo 2, Bravo 3

OMC stern drivesOMC Cobra stern drivesOMC Cobra stern drives

Suzuki 2-stroke O/B 2-65 hpSuzuki 2-Stroke O/B 75-225 hpSuzuki 2 - 140 hpSuzuki 2 - 225 hpSuzuki 4-Stroke O/B 9.9-70 hp

Volvo Stern DrivesVolvo 4, 6 & 8 cyl SP, DP, Sx, DPx stern drivesVolvo Stern Drives

Yamaha 2 - 225 hpYamaha 2 - 250 hpYamaha 2 - 250 hpYamaha 2-90 hp 2-strokeYamaha 9.9-100 hp 4-strokeYamaha 115-250 hp 2-strokeYamaha 75-225 hp 4-stroke

Mfg #B750B751-4

B734B732B736B733B735-2B737-2B753

B757-2

B712B719B721B726B722B723B724B710B725B727

B715B714

B740B742B744B745-2

B730B738B739

B778B779B780B781B782

B770B771-2B775

B783B784B785B786B788B789B791

Years'66-'84'84-'99

'56-'72'73-'90'73-'90'91-'94'95-'03'95-'02'94-'01

'76-'05

'01-'03'64-'71'72-'89'72-'89'90-'93'94-'97'94-'97'95-'00'98-'02'98-'02

'90-'93'76-'89

'64-'87'86-'92'95-'97'98-'04

'64-'86'86-'93'94-'99

'92-'99'92-'99'77-'84'85-'91'97-'00

'68-'93'94-'00'01-'04

'84-'89'90-'95'96-'98'99-'02'85-'99'99-'02'00-'03

Order No.15024T

15025T

15016T

15015T

15018T

15014T

15013T

15017T

15005T

15045T

14993T

15004T

15006T

15009T

15007T

15008T

15010T

15011T

14990T

14992T

15003T

15002T

15021T

15022T

15023T

15020T

15012T

15019T

15048T

15028T

15029T

15027T

15035T

15030T

15033T

15034T

15032T

15037T

15038T

15039T

15041T

15040T

15042T

15043T

Retail$29.9929.99

$29.9929.9929.9929.9929.9929.9929.99

$29.99

$29.9929.9929.9929.9929.9929.9929.9929.9929.9929.99

$29.9929.99

$29.9929.9929.9929.99

$29.9929.9929.99

$29.9929.9929.9929.9929.99

$29.9929.9929.99

$29.9929.9929.9929.9929.9929.9929.99

Clymer marine manuals offer comprehensive, detailed service information for outboard motors and stern drive units with the most up to date cover-age in the indus-try. The step by step text in these books is geared to do-it-yourself owners as well as expert mechanics. Every conceivable part, assembly is covered in detail and is illustrated with hundreds of photos, drawings and tables.

261T

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

Mfg #W801W809-3

BWD-1MMIC-3

DescriptionKawasaki Jet Ski Sea Doo Watercraft

O/B & I/O Wiring DiagramsMotor & Boat ID reference guide

Years'76-'91'88-'96

'56-'89'21-'96

Order No.15060T

15070T

15077T

15079T

Retail$29.9929.99

$24.9924.99

Slows even the big motors down to that "ever so slow" fish tantalizing speed. Large Troller: I/O's & Outboards Over 50 HP Small Troller: Outboards Up to 50 HP Lil' Fella: Outboards Up to 25 HP

Order No.28220THF

28224THF

28227THF

28230THF

DescriptionLarge TrollerSmall TrollerLil' Fella

Spring repair kit

Mfg #460461462

468

262V

Clymer Repair ManualsComplete and comprehensive service information.

Mfg #016.1016.2

DescriptionStandard ModelModel w/Fins

Order No.29307THF

29308THF

Easy Troller Trolling Plate• The Easy Trollers hinge design prevents damage to the trolling plate under inadvertent acceleration.• Fits O/B and I/O motors from 50 hp and up• Made in the USA From marine grade anodized alumi-num and stainless steel.

Fig. 016.1

Fig. 016.2

Retail$139.99

139.9979.99

$12.99

Retail$136.95182.95

Mfg #T16401NA

DescriptionTroll-A-MaticReplacement spring

Order No.57500T

57502T

Retail$109.99

9.99

Troll-A-Matic – 50 hp & UpInexpensive, Lightweight, Easy to install. The Troll-A-Matic is constructed of tough fiberglass filled nylon to eliminate corrosion and rust. This revolutionary trolling device is completely automatic and swings up as speed is increased.

Mfg #ABOS12V1ABOS11V2ABOS121C

DescriptionABOS Marine Blue Book Volume 1 - 10 yearsABOS Marine Blue Book Volume 2 - 19 yearsABOS Marine Blue Book CD-ROM - 30 years

Order No.00353T

00351T

00352T

Retail$179.99104.99239.99

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

263V

"Smart Tabs" - The simple solution • Fully Automatic Operation • Simple installation - no through hull drilling • No Hydraulics or electric switches • It reduces the "get on plane" speed by 30% or more • Provides a level, more comfortable ride at lower speeds

As the boat speed increases, the water pressure also increases. Once the water pressure ex-ceeds the actuator load rating the trim plates begin to move upward until they are horizontal with the bottom of the boat.

Mfg #ST780-20ST980-30ST1290-60ST1290-80

Description7"x8" plates/20# Actuators9"x8" plates/30# Actuators12"x9" plates/60# Actuators12"x9" plates/80# Actuators

Boat10'-12'13'-15'16'-18'18'-22'

Order No.44400444024440644408

Retail$139.99179.99239.99239.99

"Smart Tabs" SXIncorporates all the features of original Smart Tabs! Also provides durabil-ity with the no maintenance thermo molded co-polymer composite design. Tracking Ribs have been added to improve handling at higher speeds.

Mfg #SX9510-40-BLSX9510-60-BLSX9510-80-BL

Description9.5"x10" plates/40# actuators9.5"x10" plates/60# actuators9.5"x10" plates/80# actuators

Boat14'-17'16'-18'18'-22'

Order No.444104441144412

Retail$155.99155.99155.99

Mfg #G816

Order No.25220

Hydrofoil GTA precision engineered and de-signed stabilizer with a unique patented design. Packaged on an attractive, compact display card.

Retail$39.99

Mfg #SR-XPI-1SR-XPI-2SR-XPI-3

JR-XPI-1JR-XPI-2

TE-XPI-1TE-XPI-2

DescriptionBlack Standard 25-365 hpWhite Standard 25-365 hpGrey Standard 25-365 hp

Black Junior up to 25 hpWhite Junior up to 25 hp

Black Torque EqualizerWhite Torque Equalizer

Retail$59.9559.9559.95

$49.9549.95

$15.9515.95

• On Plane Quicker • Reduces Bow Rise• Eliminates Chine Walking • Stops Porpoising• Wipes out Cavitation • Saves Fuel• True Stabilization • Aids in Pulling Skiers

Plus... • NO DRILL Mounting • Sleeker Profile • Captive Prop-Wash Resulting in Improved Thrust • Fastest Hole Shot!

XRIII

Order No.36710T

36711T

36712T

36708T

36709T

36713T

36714T

Mfg #SR-XRIII-1SR-XRIII-2SR-XRIII-3

DescriptionBlackWhiteGrey

Retail$149.95149.95149.95

Order No.36725T

36726T

36728T

Mfg #JR-XRIII-1

DescriptionBlack

Retail$129.95

Order No.36730T

XP

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

Performance:Increase Speed - Reduce pounding - Correct listing - Eliminate porpoising - Off set prop torque - Comple-ment engines power trimEfficiency:Reduce fuel consumption - Reduce engine laboring - Eliminate squatting Maximum efficiency is obtained by using the longest span planes possible. The planes are secured

to the trailing edge of the bottom. Measure the hull from centerline to the chine , or turn of the bilge, and select the longest span planes that can be used (allowing 3"-4" of leeway).

Trim plane sets DO NOT come with a control you MUST order a control when you order your trim tabs.

Span - Inboard to outboard measurementChord - For to aft measurement

Mfg #ES2000

Euro Style Rocker SwitchWaterproof rocker switch.

264V

AutoTab ControlThe Bennet Auto Tab Control monitors and maintains your boat's attitude, automatically correcting out of trim conditions.

Tab Postion IndicatorAttractive, Compact and easy to install. The TPI will work with any Bennett trim tab system on the market. It is ac-curate, waterproof and features adjust-able intensity LED's for day or night.

Order No.08165T

Retail$96.00

Mfg #TPI-2000

Order No.08170T

Retail$285.00

Mfg #AC-3000

Order No.08178T

Retail$420.00

Chord9"9"9"9"

Span12"18"24"30"

Hull Length15'-24'18'-24'20'-26'25'-30'

Order No.08151T

08153T

08155T

08157T

Retail$650.00705.00735.00770.00

Mfg #V351HPUA1101AVP1135GVP1135RT1125-20

DescriptionHydraulic power unitActuator assemblyGreen wire solenoidRed wire solenoid20' Hydraulic hose tubing

Order No.08171T

08169T

08175T

08174T

08179T

Retail$378.00105.0060.0060.0039.00

Replacement Parts

Hydra Powered Assisted Outboard Motor Bracket• Effortless operation - raises and lowers motors in less than 30 seconds• 12 volt contained marinized hydraulic actuator• Designed to fit 4-stroke motors, wide stance for stability• Heavy duty 1/2" thick structural aluminum extrusion• 13-1/4" vertical travel• Poly mounting board

Bracket includes: 1/2"-20 x 4-1/2" Stainless mounting hardware.2000lb motor safety cable

**TRIM TABS are Special Order**

**Special Order**

Mfg #7109571096

Max. HP25hp40hp

Max. Weight148lbs248lbs

Order No.23619TW

23620TW

Retail$2075.002175.00

**Special Order**

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

265N

Mfg #SP655SP663SP667

ApplicationMercury/Mercruiser Alpha One 1973-upEvin/Johnson 88hp special 1988-2002Evin/Johnson 200HP High Output '03-'07

Retail$69.9569.9569.95

Order No.39533T

39535T

39537T

Skeg ProtectorMade from anti-corrosive, 18 gauge 304 SS, SkegPro protects against harsh marine environments. Its mirror-polished finish creates a custom look and lasting protection.• Protects against ramp dragging, rocks, debris and submerged objects• Installs easily in less than 10 minutes• A model to fit virtually any skeg

Introducing - Panther's new line of products for ultimate skeg protection:Safe - SkegWhether you are looking to protect your new skeg, repair your damaged one or even just add some shine. 316 marine grade stainless steel Safe-Skeg is brilliantly polished and ready to install!Kit includes: Mounting hardware and instructions.

Mfg #35-SS60035-SS60535-SS61035-SS61535-SS62035-SS625

35-SS63035-SS63535-SS64035-SS64535-SS65035-SS655

35-SS66035-SS66535-SS67035-SS67535-SS68035-SS685

35-SS69035-SS69535-SS70035-SS70535-SS71035-SSKIT1

DescriptionMercruiser Pre Alpha OneMercruiser Alpha One '89Mercruiser Alpha One Gen IIMercruiser Bravo IIIMercury 150 '88, Mercury 135 '87Honda 90, Mercury 75

Evinrude/Johnson 150, 175 ('86 thru '03)Evinrude/Johnson 90, 100, 115, 120, 140Evinrude/Johnson 60, 70Yamaha 150 '09Honda 35, 40, 45/Suzuki 40, 50, 60Volvo SX ('06-'09)/Volvo DP ('96-'07)

Mercury 200 OptimaxVolvo SX ('95-'06)Evinrude/Johnson 150, 175, ('04-'10)Evinrude/Johnson 75, 90 E-TecSuzuki 90, 115, 140/Evinrude/Johnson 60, 70, 90Honda 135, 150, 200, 225

Yamaha 155, 130 ('03-'09)Yamaha 200Yamaha 60, 70, 80, 90, 100 ('02-'09)Yamaha 40, 50 ('01-'09)Evinrude/Johnson 40, 50 by SuzukiSafe-Skeg hardware kit

Retail$129.00129.00129.00129.00129.00129.00

$129.00129.00129.00129.00129.00129.00

$129.00129.00129.00129.00129.00129.00

$129.00129.00129.00129.00129.00

34.99

Order No. NET

263502635126352263532635426355

263562635726358263592636026361

263622636326364263652636626367

263682636926370263712637226373

**For a Full List of Applications please call or visit www.keelguard.com/modelguide

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

Stationary Motor BracketA permanent fixed height mount for auxilary or trolling motors. Tough 304 stainless steel brack-ets, 1-1/2" thick POLY mount-ing board 8" wide. For motors up to 15 hp.

Platform Motor BracketA fixed height mount for an auxi-lary or trolling motor. Designed to be mounted on a transom platform. Tough 304 stainless steel brackets 1-1/2" thick POLY mounting board. For motors up to 15 hp.

Mfg #G71078

Mfg #G71074

266V

Retail$102.50

Retail$84.50

Order No.23632T

Order No.23630T

"Easy Pump" Outboard Motor BracketPlain and simple The Best Manual Outboard Motor Bracket Available!• 14" Height Adjustment• 7-1/2 to 25hp motors• Max weight 175 lbsSimple pump to raise bracket!

Mfg #71092Order No. 23618TW $1450.00

Mfg #55-0024Order No. 26393NET $99.99

Fixed Outboard Motor Bracket SSVertical, fixed mount outboard motor bracket. Motors up to 12 HP or 85 lbs. Stainless Steel with heavy duty poly mounting board. Each bracket is 8.5"x 6.125". All hardware included.

Lightweight 4-Stroke Motor Bracket• 2 & 4-stroke motors up to 15hp or 132lbs• Hard coat anodized aluminum• Adjusts with the turn of a knob• SS torsion springs• 10" of travel• 5 vertical running positions

Mfg #55-0407ALOrder No. 26394NET $279.99

Lightweight 4-Stroke Motor Bracket• Stainless Steel construction• 4-stroke motors up to 15hp or 132lbs• 2-stroke motors up to 20hp or 132lbs• Twist knob safety locks• Heavy duty SS torsion springs• 2" polypropylene mounting board• 10" of travel• 4 position lock bar• Rated for long or short shaft engines

Mfg #55-0408SSOrder No. 26395NET $332.95

Mfg #55-0416Order No. 26397NET $459.99

4-Stroke Auxiliary Motor Brackets• Anodized aluminum bracket• Handles up to 35hp• Adjusts with the turn of a knob• SS torsion springs• 2" polypropylene mounting board• 16" of travel• 4 position lock bar• Rated for long or short shaft engines

Mfg #55-0410Order No. 26396NET $329.99

4-Stroke Auxiliary Motor Brackets• Anodized aluminum bracket• Handles up to 35hp• Adjusts with the turn of a knob• SS torsion springs• 2" polypropylene mounting board• 10" of travel• 5 vertical running positions• Rated for long or short shaft engines

**Special Order**

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

Auxilary/Trolling Motor Brackets• Retractable Bracket for trolling motors on power and sail boats• Transom mount locks and holds motor up or swings down for propulsion• Tough alloy anodized aluminum, w/stainless steel springs and bolts• Fits all style motors (extra wide 11-1/2" black poly mounting board)• 4-position locking height adjustment• Stainless steel mounting hardware and instructions included• 2" thick x 11-1/2" wide mounting pad. (except G71044 16" wide)

Stainless Steel Auxilary Motor Bracket• Easier to lift and lower - Stainless springs help counter balance motor weight• Transom mount locks and holds motor up or swings down for propulsion• Built in transom angle adjustment allows optimum motor performance • Fits all motor styles (11-1/2" wide black poly mounting board)• 4-position locking height adjustment• Wide track body for added stability• Made of tough 304 Stainless steel• 2" thick x 11-1/2" wide mounting board

Mfg #G71037G71039G71056

H.P. Ratingto 8 hp7-1/2 to 12 hp7-1/2 to 20 hp

Weight Cap.59 lbs82 lbs115 lbs

Travel8-1/2"14-1/4"11-1/4"

Order No.23587THF

23589T

23613T

Retail$224.95262.50221.50

Mfg #G71053

DescriptionAdapter plate

Order No.23612T

Outboard Motor Bracket Adapter PlateEnables the boater to remove his bracket from the transom quickly. Fits models G71040, G71041, G71042.

Mfg #G71090G71091

Description7-1/2 to 30 hp7-1/2 to 25 hp

Order No.23635T

23636T

Outboard Motor Brackets Built especially for new 4-stroke, heavier, high torque motors.11-1/2" wide mounting board. Rated up to 175 lbs.

Mfg #G99057

Order No.23757

2" Thick Poly (11-1/2" x 10-3/4")

Replacement Boards

267V

Travel9-1/2"15-1/2"

Retail$61.95

Retail$315.50449.95

Retail$72.50

Mfg #G71040G71042G71057

H.P. Rating8 hp7-1/2 to 12 hp7-1/2 to 20 hp

Weight Cap.59 lbs82 lbs115 lbs

Travel8-1/2"14-1/4"11-1/4"

Order No.23590T

23598T

23615T

Retail$165.95179.95172.50

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

268V

Mfg #TE-217

DescriptionTransom Elevator

Order No.57788

Mfg #MJ-1

DescriptionMini Jacker

Order No.57330

Transom ElevatorFor boats with transoms to 1-3/4" thick. Constructed of aluminum. Allows long shaft motor to be used on short shaft boats. Rated to 40 hp. For Clamp-on or bolt on motors.

Mini JackerThis cast aluminum offset jack plate is designed to handle clamp-on motors up to 35 hp. The minijack-er has a 4" stand-off. Mounting surface is 11-1/2" wide x 10" high.

15"

5-1/4"

Retail$239.99

Retail$139.99

Fixed Motor BracketHD Aluminum bracket is designed to hold 2 or 4 stroke engines weighing up to 150 lbs.

• 5" Height adjustment• 8-1/2" Setback

Auxilary Motor MountThis bracket makes mounting an auxilary or long shaft motor a snap! It provides 5" of lift to any motor to 40hp or 150lbs.

Auxiliary Motor Bracket• Up to 40hp four stroke motors• Up to 15.5" vertical lift• Fabricated aluminum plate• Powder coat painted• Stainless steel hardware• Electro/hydraulic

Mfg #55-0045Order No. 56903 N $1249.99

Panther 435Fixed Auxilary Motor Bracket• Handles motors to 35 hp• Adjust 7" or 13"• Fixed Trim

Mfg #55-0435Order No. 56911 TW $399.99

Weekender SeriesTrim/TiltThis unit is designed for the weekend fisherman to use on 2 or 4 stroke engines to 150lbs.8" Setback

Mfg #55-0040Order No. 56909 TW $575.99

Universal Lift GaugeThis unit is truly universal and will fit any jack plate or trim and tilt unit. The 2-1/8" gauge matches most factory installation gauges. Kit contains gauge, sending unit, all wiring and directions.

Mfg #55-1100

DescriptionGauge kit

Order No.56921 TW

Retail$224.99

Mfg #55-0027Order No. 57104 N $219.95

Mfg #55-0405Order No. 56907 TW $159.99

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

Panther 35 Remote Auxilary Motor Lift! Raise and lower your auxilary motor at the touch of a button. Handles motors to 35 hp including 4-stroke motors.• 5 degree tuck under & 30-60 degree adjust tilt range• Electro mechanical operation• 7" or 12" transom set back (adjustable)• Optional 2" Aluminum Shim Kit available

Retail$625.00649.00

$60.9964.999.99

7" Set Back

12" Set-Back

269V

Mfg #55-003555-0350

99-5502255-906099-55098

DescriptionTilt AssemblyTilt assembly - fits Ranger boats

Replacement Relay Kit6-1/2" Bolt KitPlastic Mounting Board

Order No.56908N

57101N

56914TW

66539TW

56916TF

PT 130 Power Trim & Tilt• Rated to 130 HP • For clamp-on or bolt-on motors • 20° of trim/90° of total tilt • 7800 lbs of thrust• 6" Set-Back • Standard BIA bolt hole pattern

Mfg #C13002C13001C13022C13032

DescriptionTrim/Tilt without gaugeTrim/Tilt with gaugeTransom clamp adapterSpacer kit for pontoons

Order No.10101TW

10102TW

10105TW

10107TW

PT-35 Power Trim and Tilt• Accomodates 35 HP and below motors • Accomodates clamp or bolt on motors• 5-1/2" setback • Weighs only 24 lbs• Motor width must not exceed 10" • 84° total trim and tilt

Mfg #52100

DescriptionTrim/Tilt without gauge

Order No.10100TW

Retail$734.99864.9980.9950.99

Retail$619.99

Raise and lower your motor with push button convenience! Add trim and tilt to any motor. Rugged reliable design. Easy to operate.• 5 degrees of tuck under & 60 degrees total tilt• Electro mechanical operation• 7" Transom set back• Optional Universal Trim Gauge

Mfg #55-005555-0135

Descriptionmotors to 55 hpmotors to 135 hp

Order No.56910N

56912N

Retail$599.00689.00

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

270V

HydraulicHydro LiftThe Professional SeriesState of the art heavy duty hydraulic jack system delivers precise control with no effort! Getting your boat on plane has never been faster! It lifts your outboard in 8-10 seconds at full throttle.• Rated to 300 hp• 6" Set Back• 6" Vertical Lift

Mfg #OGT 600 w/Lever ControlOrder No. 57154N Retail $1014.00

Mfg #OEZ 600 w/EX-Zact ControlOrder No. 57156N Retail $1170.00

EX-Zact Control Dial

Lever Control Manual Hydro LiftThe Performer SeriesFinally! A manual jack plate that can be adjusted from inside the boat with only one screw! No side hardware to loosen! Just turn the adjustment screw to the desired height, tighten the locking nut and you are ready to go.• Rated to 300 hp• 6" set back• 3.5" Vertical Lift

Mfg #600M Hydro LiftOrder No. 57150N Retail $421.00

Mfg #Wrench-1 Bent WrenchOrder No. 57152N Retail $29.99

Integral Trim & TiltThis trim/tilt unit will work with all Johnson/Evinrude 20-35 hp motors 1978 & newer, 2-stroke only. Models with thru hub exhaust.Will Not Work with 4-Stroke Mo-tors

PL-65 Electric Hydraulic Transom Jacks• Rated to hold all V6 motors • 5" Of lift• 5-1/2" Set-Back • Standard BIA Bolt hole pattern

Mfg #C65002C65001

DescriptionPower jack plate with out gaugePower jack plate with gauge

Order No.10103TW

10104TW

Retail$924.991119.99

Mfg #55-0025

Order No.57102N

Retail $559.99

Manual Transom Jacks - 5" Lift/5-1/2" set-backThe motor bracket moves up and down on the transom bracket by use of rollers machined from aluminum-bronze alloy. The manual power lift is de-signed to fit any standard motor with-out drilling. To adjust manual lift simply loosen 4-clamp bolts turn the 1-1/8" nut at the bottom of the bracket to achieve the desired height.

Mfg #65012

Order No.10109TW

Retail$315.99

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

Mfg #55-0100Order No. 56906N $399.00

Mfg #55-0102Order No. 56904N $489.00

Steering Trim Control UnitThis steering trim control unit comes complete with coiled cord. The weatherproof rubber, push button, switches will provide trim control without removing your hands from the steering wheel.

Transom Trim SwitchThis transom trim switch provides a weatherproof tilt switch control system at the stern area of the boat to facilitate placing motor support in position with one person.

Mfg #TTC-1

Order No.57355

Retail$34.99

Mfg #ST-1

Order No.57346

Retail$79.99

Hot TrimFloor mounted trim switch. A must for all tiller operated motors. Keep your hands where they belong, on the con-trols. Will operate Trim/Tilt & Transom Jacks. Comes completely prewired with complete instructions.

Mfg #HT-1

Order No.57334

Retail$54.99

Trim Control Where It Belongs - At Your Finger TipsDual or single switch kits. Designed to work with all teleflex steering systems, will retrofit many others as well.

Accessory Trim Switch12' of cable allows easy and custom installation of this re-mote push button switch. This switch splices into existing applications or can be plugged into any Panther product.

Mfg #55-1200

Order No.56915TW

Retail$49.99

271V

The Brand New ..... T4Through the tilt tube steering!• 24' Cable allows you to steer your kicker from anywhere in your boat• Mounts to your kicker motor in minutes• Does not take up any space on your transom

• Quick response • Quick disconnect• Durable waterproof motor • Compact design• Black anodized finish

Model 0100Electro Steer For Kicker Motors

DescriptionSingle LeverDual Lever

Order No.6011660117

Mfg #PT1000PPT2000P

Retail$79.99146.99

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

DescriptionShort KitLong Kit

Order No.6653766535

Short Kit: 4 ea of 1/2-13 x 2-1/2" fully threaded cap bolt, 1/2-13 nylock nut waxed, 1/2 flat washer.

Long Kit: 4-ea 1/2-13 x 4" fully threaded cap bolt, 1/2-13 nylock nut waxed, 1/2 flat washer & 2-ea 1/2 fender washer

Stainless Steel Motor Mounting Hardware Kit

272V

Mfg #KT040KT030

Retail$13.4914.99

Transom WedgesThese transom wedges fit newer model OMC & mercury engines, bolt on engines with factory installed trim & tilt. Cast aluminum construction.

Motor TilterThe ideal leverage tool for use with motors with-out power tilt. Helps to tilt back safely without strain. Use with motors up to 40 hp.

Mfg #TW-2Order No. 57388 $44.99

6-1/2" Stainless SteelMotor Mounting Hardware Kit

Mfg # 55-9060Order No. 66539TW $64.99

Pro StrapThe Pro Strap provides hands-free, heavy duty retention for the model 35. As the engine is tilted, the strap tightens and secures the motor for extreme, rough water conditions. The Pro Strap fits any auxi-lary outboard with a Panther Model 35

Mfg #55-1500Order No. 56917TF $29.99

Safety Cable Prevents loss of small outboard engines. Clear vinyl coated heavy duty steel cable. 3/32" diameter x 50" long.

Mfg # 11664-3Order No. 09420 $14.89

Aluminum Transom PlateHolds small outboards on the tran-som securely. Prevents damage to the transom by the clamps. Drilled for mounting screws

Transom Pad• Protects transom• Rubber pad is oil and weather resistant• Reduces motor vibration noise

Mfg #099074-10Order No. 43459 $34.99

Trailering ClipsSimply place in extended trim rams to take shock off of the hydraulic system.

Mfg #18-909918-9098

DescriptionFor MercruiserFor OMC Cobra

Order No.89099N

89098N

Retail$27.4921.49

Mfg #G71036Order No. 23586T $73.50

Mfg #TP-32Order No. 57790 $39.99

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

273V

Outboard LockLock design features a free spinning collar that will turn if attacked by gripping tools without loosening the lock. Tough hardened stainless steel construction.

Outboard Motor LockLaminated pin tumbler lock recessed in case hardened vinyl clad steel tube. Brass Lock.

Outboard Motor LockMounts on most outboard motors. Coated with a long lasting black powder coat.

Transom Tuff'nerSave your transom from "biting" and cracking with the Transom Tuff'ner! Adds strength and longevity to your boats transom by evenly distributing forces during fast starts, high speeds & sharp turns. Aluminum construction.

Mfg #740377403874049

ApplicationYamaha 50 hp and upJohnson/Evinrude 40 hp and upUniversal Smaller outboards

Retail$36.9936.9936.99

Order No.35806THF

35808THF

35810THF

Threads12x1.251/2"-135/16"-18

Mfg #1780223 2" x 15"Order No. 55402THF $46.95

Outboard Motor Lock• Heavy carbon steel design• Fits turnbuckle mounted engines• Recessed solid brass lock• Noise dampeners reduce rattle

Mfg #75-8000Order No. 26398 $27.49

Outboard ExtensionHandleComplete steering and throttle control. Easy to Use, Durable, Flexible. Fits all outboards 15 hp and under. • Adjustable length 36" to 53".

Mfg #001

DescriptionHandle w/U-Joint

Order No.29301THF

Extension HandleExtension handle for all Minnkota motors and small outboards up to 30 hp. Lightweight and corrosion resistant, easy to attach and remove.

Mfg #18541001854101

Description30" Straight handle18" Straight handle

Order No.56872T

56873T

Retail$52.95

Retail$37.9926.79

Mfg #OML-0127Order No. 22750 $38.49

Mfg #430Order No. 37925THF $29.95

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

Universal Motor SupportMounts either to the trailer w/a removable bracket or over the roller. Fully adjustable 34" to 46".

Mfg #55-2100

Order No.57131

Adjustable Motor SupportPlated tubing, removable, adjusts 28" to 59".

Mfg #55-190055-195099-55805

DescriptionMotor supportOver roller brkt"V" block only

Order No.264002640126405

Retail$66.99

Retail$59.99

7.4912.99

274V

Transom SaverDeluxe adjustable head with composite pads. Aluminum tubing construction. Bolt-on mounting, 19"to 29" Adjustable length.

Lock'N StowUnlike traditional transom savers, Lock'N Stow does not "Tie" the outboard to the trailer. It's small size also makes it easy to store in your boat when not in use. Black Powder Coat Finish.

Mfg #10309A10108A10107P10106

ApplicationOMC 1989 & newer - 100 hp and upMercury engines 75 hp - 200 hp EFIMercury engines 200 Opti - 250 EFIReplacement busing

Order No.00752THF

00753THF

00754THF

00751

Retail$82.5988.7993.955.95

Mfg #400BOrder No. 00750 $47.79

Transom SaversEssential for protecting your boat's transom and stabilizing your engine while your rig is being trailered. Each unit is constructed of high tensile aluminum tubing with easy height adjustment. A design which assures a perfect fit on any engine. ** RB Model includes both mounts Over the Roller & Bolt On

MD Angled Adjustable Reach Transom Saver• Adjusts from 30"-60"•Unique angle adjustment from 0º to 36º with 12º increments• Locking feature prevents unintentional detachment•Fits any trailer• Heavy duty molded rubber pads prevent scratching on the lower unit• Steel construction with AquaArmor corrosion resistant black finish on the tubes

Mfg #4000-ADJ RB424-ADJSP-410

Description21" to 31" - Roller/Bolt on Mount - adj. head32" to 42" - Over the roller mount - adj. headReplacement Rubber Shocks 4/set

Order No.00757THF

0075500771

Retail$58.9966.959.59

Mfg #460-ADJOrder No. 00756THF $105.99

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

275V

Twist Lock Frame Mount Transom SaverTwist lock models provide a secure mounting to the trailer. All models are zinc plated and adjustable.

Mfg #TS-85TS-9090099006

Description23" - 37"26" - 56"Rubber V blockTrailer brkt

Order No.64622T

64625T

64621T

64628T

Mfg #TS-86TS-919009

Description23" - 37"26" - 56"Rubber V block

Order No.64614T

64616T

64621T

Mfg #TS-80TS-829009

Description21" - 30"30" - 53"Rubber V block

Order No.64618T

64620T

64621T

The "Straight Tube"Roller Mount Transom SaverAll models are zinc plated and adjustable.

Roller Mount Transom SaverAll models are adjustable and have a zinc plated finish.

The Straight TubeTwist Lock Mount Transom SaverAll models are zinc plated and fully adjustable.

Mfg #TS-81TS-8390099006

Description21" - 30"20" - 53"Rubber V blockTrailer brkt

Order No.64610T

64612T

64621T

64628T

Retail$55.9566.959.959.95

Retail$55.9565.959.95

Retail$42.9552.959.95

Retail$42.9553.509.959.95

A Unique New Device For Trailering - Designed for three ram trim units on Mercury, Yamaha, Suzuki and Honda motors. Easy to use, easy to stow when not in use! Simply put the M-YWedge on the ap-propriate trim ram and run the engine down putting pres-sure on the Rubber support taking all of the shock off of the trailer and transom.

Universal M-Y WedgeAll the benefits of the original M-Y Wedge and uses the main tilt rod on single ram trim units. The Universal M-Y Wedge pops into place over the main tilt rod.5" Length

Mfg #MW-5Order No. 43503TF $41.99

Mfg #MY-1Order No. 43500TF $41.99

NavigationLites

Steering/Controls

Hardware/Fasteners

Covers/Windshield

Pumps/Int. Lites

Electric/Battery

Minnkota

Gauges

Electronics/Radios

Fuel

Lube/Motor Care


Spark Plug/Starters

Props

Seats/Pedestals

Anchors/Rod Holder

Winches/Jacks

Lites/Tie Downs

Tires/Couplers

BoatCare

Misc./Flooring

Ski's/Tubes

Floatation

Ladders

Water Front

Fenders/Dock Lines

276V

Motor Carriers• For ease when storing or moving motors• Models for outboards and trolling motors from 1 to 115 hp and up to 315 lbs.• Strong aluminum tube frame • Black recycled plastic mounting board

Motor StandFor motors up to 50 hp or 180 lbs. Black recycled plastic mounting board.

Motor StandFor motors up to 15 hp or 85 lbs.Black recycled plastic mounting board.

Boat DollyHelps move and roll small fishing boats. Clamps securely to the transom.

G31400

G31600

G31800G31900

Mfg #71050

Order No.23606T

Retail$71.95

Mfg #30300

Order No.23115THF

Retail$76.50

Mfg #30400

Order No.23116THF

Retail$98.50

Recycled Plastic Mounting Boards!!

Mfg #31400316003180031900

DescriptionMotor carrier 1-15 hp or up to 85 lbsMotor carrier 1-30 hp or up to 130 lbsMotor carrier 30-80 hp or up to 265 lbsMotor carrier 30-115 hp or up to 315 lbs

Order No.23117THF

23127THF

23128T

23129T

Retail$76.50101.50250.95278.95

features: • electronic throttle trollmaster pro3...

Documents